From 0bf3a9d82adc62fb05e3f108ddd46eb088960f26 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 11 Dec 2006 16:25:30 +0000 Subject: [MTD] Nuke IVR leftovers Support for the ITE8172 based boards was deleted a while ago so this is dead code. The Kconfig dependency on MIPS was wrong anyway, MIPS is a processor architecture and nothing else; guesses on systems architecture are likely to be wrong ... Signed-off-by: Ralf Baechle Signed-off-by: David Woodhouse --- drivers/mtd/maps/Kconfig | 44 ----------- drivers/mtd/maps/Makefile | 1 - drivers/mtd/maps/cstm_mips_ixx.c | 164 --------------------------------------- 3 files changed, 209 deletions(-) delete mode 100644 drivers/mtd/maps/cstm_mips_ixx.c (limited to 'drivers/mtd') diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 7aac68a62f8c..3a33b98eb93d 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -382,50 +382,6 @@ config MTD_TQM834x TQ Components TQM834x boards. If you have one of these boards and would like to use the flash chips on it, say 'Y'. -config MTD_CSTM_MIPS_IXX - tristate "Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board" - depends on MIPS && MTD_CFI && MTD_JEDECPROBE && MTD_PARTITIONS - help - This provides a mapping driver for the Integrated Technology - Express, Inc (ITE) QED-4N-S01B eval board and the Globespan IVR - Reference Board. It provides the necessary addressing, length, - buswidth, vpp code and addition setup of the flash device for - these boards. In addition, this mapping driver can be used for - other boards via setting of the CONFIG_MTD_CSTM_MIPS_IXX_START/ - LEN/BUSWIDTH parameters. This mapping will provide one mtd device - using one partition. The start address can be offset from the - beginning of flash and the len can be less than the total flash - device size to allow a window into the flash. Both CFI and JEDEC - probes are called. - -config MTD_CSTM_MIPS_IXX_START - hex "Physical start address of flash mapping" - depends on MTD_CSTM_MIPS_IXX - default "0x8000000" - help - This is the physical memory location that the MTD driver will - use for the flash chips on your particular target board. - Refer to the memory map which should hopefully be in the - documentation for your board. - -config MTD_CSTM_MIPS_IXX_LEN - hex "Physical length of flash mapping" - depends on MTD_CSTM_MIPS_IXX - default "0x4000000" - help - This is the total length that the MTD driver will use for the - flash chips on your particular board. Refer to the memory - map which should hopefully be in the documentation for your - board. - -config MTD_CSTM_MIPS_IXX_BUSWIDTH - int "Bus width in octets" - depends on MTD_CSTM_MIPS_IXX - default "2" - help - This is the total bus width of the mapping of the flash chips - on your particular board. - config MTD_OCELOT tristate "Momenco Ocelot boot flash device" depends on MIPS && MOMENCO_OCELOT diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index df019be753e3..071d0bf922b6 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_MTD_CDB89712) += cdb89712.o obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o obj-$(CONFIG_MTD_BAST) += bast-flash.o obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o -obj-$(CONFIG_MTD_CSTM_MIPS_IXX) += cstm_mips_ixx.o obj-$(CONFIG_MTD_DC21285) += dc21285.o obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o obj-$(CONFIG_MTD_L440GX) += l440gx.o diff --git a/drivers/mtd/maps/cstm_mips_ixx.c b/drivers/mtd/maps/cstm_mips_ixx.c deleted file mode 100644 index 2ef22a5a1de2..000000000000 --- a/drivers/mtd/maps/cstm_mips_ixx.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * $Id: cstm_mips_ixx.c,v 1.14 2005/11/07 11:14:26 gleixner Exp $ - * - * Mapping of a custom board with both AMD CFI and JEDEC flash in partitions. - * Config with both CFI and JEDEC device support. - * - * Basically physmap.c with the addition of partitions and - * an array of mapping info to accomodate more than one flash type per board. - * - * Copyright 2000 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* board and partition description */ - -#define MAX_PHYSMAP_PARTITIONS 8 -struct cstm_mips_ixx_info { - char *name; - unsigned long window_addr; - unsigned long window_size; - int bankwidth; - int num_partitions; -}; - -#define PHYSMAP_NUMBER 1 // number of board desc structs needed, one per contiguous flash type -const struct cstm_mips_ixx_info cstm_mips_ixx_board_desc[PHYSMAP_NUMBER] = -{ - { - "MTD flash", // name - CONFIG_MTD_CSTM_MIPS_IXX_START, // window_addr - CONFIG_MTD_CSTM_MIPS_IXX_LEN, // window_size - CONFIG_MTD_CSTM_MIPS_IXX_BUSWIDTH, // bankwidth - 1, // num_partitions - }, - -}; -static struct mtd_partition cstm_mips_ixx_partitions[PHYSMAP_NUMBER][MAX_PHYSMAP_PARTITIONS] = { -{ - { - .name = "main partition", - .size = CONFIG_MTD_CSTM_MIPS_IXX_LEN, - .offset = 0, - }, -}, -}; - -struct map_info cstm_mips_ixx_map[PHYSMAP_NUMBER]; - -int __init init_cstm_mips_ixx(void) -{ - int i; - int jedec; - struct mtd_info *mymtd; - struct mtd_partition *parts; - - /* Initialize mapping */ - for (i=0;iowner = THIS_MODULE; - - cstm_mips_ixx_map[i].map_priv_2 = (unsigned long)mymtd; - add_mtd_partitions(mymtd, parts, cstm_mips_ixx_board_desc[i].num_partitions); - } - else { - for (i = 0; i < PHYSMAP_NUMBER; i++) { - if (cstm_mips_ixx_map[i].virt) { - iounmap(cstm_mips_ixx_map[i].virt); - cstm_mips_ixx_map[i].virt = NULL; - } - } - return -ENXIO; - } - } - return 0; -} - -static void __exit cleanup_cstm_mips_ixx(void) -{ - int i; - struct mtd_info *mymtd; - - for (i=0;i"); -MODULE_DESCRIPTION("MTD map driver for MIPS boards"); -- cgit v1.2.3