From 508c9864ccede5dd4b8a7220b3fe6998763e4407 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Thu, 5 Apr 2018 21:24:15 +0200 Subject: mmc: core: Share internal function to set initial signal voltage Move the corresponding code for setting the initial signal voltage, from mmc_power_up() into a new function, mmc_set_initial_signal_voltage(). Make the function internally available to the mmc core, as to allow the following changes to make use of it. Signed-off-by: Ulf Hansson Tested-by: Quentin Schulz Reviewed-by: Shawn Lin --- drivers/mmc/core/core.c | 19 ++++++++++++------- drivers/mmc/core/core.h | 1 + 2 files changed, 13 insertions(+), 7 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 7a79dc1599e5..2c1a220531c4 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1484,6 +1484,17 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage) } +void mmc_set_initial_signal_voltage(struct mmc_host *host) +{ + /* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */ + if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330)) + dev_dbg(mmc_dev(host), "Initial signal voltage of 3.3v\n"); + else if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180)) + dev_dbg(mmc_dev(host), "Initial signal voltage of 1.8v\n"); + else if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120)) + dev_dbg(mmc_dev(host), "Initial signal voltage of 1.2v\n"); +} + int mmc_host_set_uhs_voltage(struct mmc_host *host) { u32 clock; @@ -1646,13 +1657,7 @@ void mmc_power_up(struct mmc_host *host, u32 ocr) /* Set initial state and call mmc_set_ios */ mmc_set_initial_state(host); - /* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */ - if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330)) - dev_dbg(mmc_dev(host), "Initial signal voltage of 3.3v\n"); - else if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180)) - dev_dbg(mmc_dev(host), "Initial signal voltage of 1.8v\n"); - else if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120)) - dev_dbg(mmc_dev(host), "Initial signal voltage of 1.2v\n"); + mmc_set_initial_signal_voltage(host); /* * This delay should be sufficient to allow the power supply diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h index a141ec0e1ccc..9d8f09ac0821 100644 --- a/drivers/mmc/core/core.h +++ b/drivers/mmc/core/core.h @@ -52,6 +52,7 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr); int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr); int mmc_host_set_uhs_voltage(struct mmc_host *host); int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage); +void mmc_set_initial_signal_voltage(struct mmc_host *host); void mmc_set_timing(struct mmc_host *host, unsigned int timing); void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type); int mmc_select_drive_strength(struct mmc_card *card, unsigned int max_dtr, -- cgit v1.2.3