From 2c171bf13423dc5293188cea7f6c2da1720926e2 Mon Sep 17 00:00:00 2001 From: Pavel Pisa Date: Fri, 19 May 2006 21:48:03 +0100 Subject: [ARM] 3531/1: i.MX/MX1 SD/MMC ensure, that clock are stopped before new command and cleanups Patch from Pavel Pisa There has been problems that for some paths that clock are not stopped during new command programming and initiation. Result is issuing of incorrect command to the card. Some other problems are cleaned too. Noisy report of known ERRATUM #4 has been suppressed. Signed-off-by: Pavel Pisa Signed-off-by: Russell King --- drivers/mmc/pxamci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/mmc/pxamci.c') diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c index f97b472085cb..b49368fd96b8 100644 --- a/drivers/mmc/pxamci.c +++ b/drivers/mmc/pxamci.c @@ -119,7 +119,7 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) nob = 0xffff; writel(nob, host->base + MMC_NOB); - writel(1 << data->blksz_bits, host->base + MMC_BLKLEN); + writel(data->blksz, host->base + MMC_BLKLEN); clks = (unsigned long long)data->timeout_ns * CLOCKRATE; do_div(clks, 1000000000UL); @@ -283,7 +283,7 @@ static int pxamci_data_done(struct pxamci_host *host, unsigned int stat) * data blocks as being in error. */ if (data->error == MMC_ERR_NONE) - data->bytes_xfered = data->blocks << data->blksz_bits; + data->bytes_xfered = data->blocks * data->blksz; else data->bytes_xfered = 0; -- cgit v1.2.3