From 669b018835326b3caa42572ba7cb31f84fa22f9d Mon Sep 17 00:00:00 2001 From: Ohad Sharabi Date: Wed, 7 Apr 2021 17:09:36 +0300 Subject: habanalabs: update to latest F/W communication header update files to latest version from F/W team. Signed-off-by: Ohad Sharabi Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/include/common/cpucp_if.h | 3 +- .../misc/habanalabs/include/common/hl_boot_if.h | 198 +++++++++++++++++++++ 2 files changed, 200 insertions(+), 1 deletion(-) (limited to 'drivers/misc/habanalabs') diff --git a/drivers/misc/habanalabs/include/common/cpucp_if.h b/drivers/misc/habanalabs/include/common/cpucp_if.h index 20a710f7a369..27cd0ba99aa3 100644 --- a/drivers/misc/habanalabs/include/common/cpucp_if.h +++ b/drivers/misc/habanalabs/include/common/cpucp_if.h @@ -11,6 +11,8 @@ #include #include +#include "hl_boot_if.h" + #define NUM_HBM_PSEUDO_CH 2 #define NUM_HBM_CH_PER_DEV 8 #define CPUCP_PKT_HBM_ECC_INFO_WR_PAR_SHIFT 0 @@ -564,7 +566,6 @@ struct eq_generic_event { */ #define CARD_NAME_MAX_LEN 16 -#define VERSION_MAX_LEN 128 #define CPUCP_MAX_SENSORS 128 #define CPUCP_MAX_NICS 128 #define CPUCP_LANES_PER_NIC 4 diff --git a/drivers/misc/habanalabs/include/common/hl_boot_if.h b/drivers/misc/habanalabs/include/common/hl_boot_if.h index 980b432fd76e..e0a259e0495c 100644 --- a/drivers/misc/habanalabs/include/common/hl_boot_if.h +++ b/drivers/misc/habanalabs/include/common/hl_boot_if.h @@ -13,6 +13,8 @@ #define BOOT_FIT_SRAM_OFFSET 0x200000 +#define VERSION_MAX_LEN 128 + /* * CPU error bits in BOOT_ERROR registers * @@ -251,6 +253,7 @@ enum kmd_msg { KMD_MSG_SKIP_BMC, RESERVED, KMD_MSG_RST_DEV, + KMD_MSG_LAST }; enum cpu_msg_status { @@ -259,4 +262,199 @@ enum cpu_msg_status { CPU_MSG_ERR, }; +/* communication registers mapping - consider ABI when changing */ +struct cpu_dyn_regs { + uint32_t cpu_pq_base_addr_low; + uint32_t cpu_pq_base_addr_high; + uint32_t cpu_pq_length; + uint32_t cpu_pq_init_status; + uint32_t cpu_eq_base_addr_low; + uint32_t cpu_eq_base_addr_high; + uint32_t cpu_eq_length; + uint32_t cpu_eq_ci; + uint32_t cpu_cq_base_addr_low; + uint32_t cpu_cq_base_addr_high; + uint32_t cpu_cq_length; + uint32_t cpu_pf_pq_pi; + uint32_t cpu_boot_dev_sts0; + uint32_t cpu_boot_dev_sts1; + uint32_t cpu_boot_err0; + uint32_t cpu_boot_err1; + uint32_t cpu_boot_status; + uint32_t fw_upd_sts; + uint32_t fw_upd_cmd; + uint32_t fw_upd_pending_sts; + uint32_t fuse_ver_offset; + uint32_t preboot_ver_offset; + uint32_t uboot_ver_offset; + uint32_t hw_state; + uint32_t kmd_msg_to_cpu; + uint32_t cpu_cmd_status_to_host; + uint32_t reserved1[32]; /* reserve for future use */ +}; + +/* HCDM - Habana Communications Descriptor Magic */ +#define HL_COMMS_DESC_MAGIC 0x4843444D +#define HL_COMMS_DESC_VER 1 + +/* this is the comms descriptor header - meta data */ +struct comms_desc_header { + uint32_t magic; /* magic for validation */ + uint32_t crc32; /* CRC32 of the descriptor w/o header */ + uint16_t size; /* size of the descriptor w/o header */ + uint8_t version; /* descriptor version */ + uint8_t reserved[5]; /* pad to 64 bit */ +}; + +/* this is the main FW descriptor - consider ABI when changing */ +struct lkd_fw_comms_desc { + struct comms_desc_header header; + struct cpu_dyn_regs cpu_dyn_regs; + char fuse_ver[VERSION_MAX_LEN]; + char cur_fw_ver[VERSION_MAX_LEN]; + /* can be used for 1 more version w/o ABI change */ + char reserved0[VERSION_MAX_LEN]; + uint64_t img_addr; /* address for next FW component load */ +}; + +/* + * LKD commands: + * + * COMMS_NOOP Used to clear the command register and no actual + * command is send. + * + * COMMS_CLR_STS Clear status command - FW should clear the + * status register. Used for synchronization + * between the commands as part of the race free + * protocol. + * + * COMMS_RST_STATE Reset the current communication state which is + * kept by FW for proper responses. + * Should be used in the beginning of the + * communication cycle to clean any leftovers from + * previous communication attempts. + * + * COMMS_PREP_DESC Prepare descriptor for setting up the + * communication and other dynamic data: + * struct lkd_fw_comms_desc. + * This command has a parameter stating the next FW + * component size, so the FW can actually prepare a + * space for it and in the status response provide + * the descriptor offset. The Offset of the next FW + * data component is a part of the descriptor + * structure. + * + * COMMS_DATA_RDY The FW data has been uploaded and is ready for + * validation. + * + * COMMS_EXEC Execute the next FW component. + * + * COMMS_RST_DEV Reset the device. + * + * COMMS_GOTO_WFE Execute WFE command. Allowed only on non-secure + * devices. + * + * COMMS_SKIP_BMC Perform actions required for BMC-less servers. + * Do not wait for BMC response. + * + * COMMS_LOW_PLL_OPP Initialize PLLs for low OPP. + */ +enum comms_cmd { + COMMS_NOOP = 0, + COMMS_CLR_STS = 1, + COMMS_RST_STATE = 2, + COMMS_PREP_DESC = 3, + COMMS_DATA_RDY = 4, + COMMS_EXEC = 5, + COMMS_RST_DEV = 6, + COMMS_GOTO_WFE = 7, + COMMS_SKIP_BMC = 8, + COMMS_LOW_PLL_OPP = 9, + COMMS_INVLD_LAST +}; + +#define COMMS_COMMAND_SIZE_SHIFT 0 +#define COMMS_COMMAND_SIZE_MASK 0x1FFFFFF +#define COMMS_COMMAND_CMD_SHIFT 27 +#define COMMS_COMMAND_CMD_MASK 0xF8000000 + +/* + * LKD command to FW register structure + * @size - FW component size + * @cmd - command from enum comms_cmd + */ +struct comms_command { + union { /* bit fields are only for FW use */ + struct { + unsigned int size :25; /* 32MB max. */ + unsigned int reserved :2; + enum comms_cmd cmd :5; /* 32 commands */ + }; + unsigned int val; + }; +}; + +/* + * FW status + * + * COMMS_STS_NOOP Used to clear the status register and no actual + * status is provided. + * + * COMMS_STS_ACK Command has been received and recognized. + * + * COMMS_STS_OK Command execution has finished successfully. + * + * COMMS_STS_ERR Command execution was unsuccessful and resulted + * in error. + * + * COMMS_STS_VALID_ERR FW validation has failed. + * + * COMMS_STS_TIMEOUT_ERR Command execution has timed out. + */ +enum comms_sts { + COMMS_STS_NOOP = 0, + COMMS_STS_ACK = 1, + COMMS_STS_OK = 2, + COMMS_STS_ERR = 3, + COMMS_STS_VALID_ERR = 4, + COMMS_STS_TIMEOUT_ERR = 5, + COMMS_STS_INVLD_LAST +}; + +/* RAM types for FW components loading - defines the base address */ +enum comms_ram_types { + COMMS_SRAM = 0, + COMMS_DRAM = 1, +}; + +#define COMMS_STATUS_OFFSET_SHIFT 0 +#define COMMS_STATUS_OFFSET_MASK 0x03FFFFFF +#define COMMS_STATUS_OFFSET_ALIGN_SHIFT 2 +#define COMMS_STATUS_RAM_TYPE_SHIFT 26 +#define COMMS_STATUS_RAM_TYPE_MASK 0x0C000000 +#define COMMS_STATUS_STATUS_SHIFT 28 +#define COMMS_STATUS_STATUS_MASK 0xF0000000 + +/* + * FW status to LKD register structure + * @offset - an offset from the base of the ram_type shifted right by + * 2 bits (always aligned to 32 bits). + * Allows a maximum addressable offset of 256MB from RAM base. + * Example: for real offset in RAM of 0x800000 (8MB), the value + * in offset field is (0x800000 >> 2) = 0x200000. + * @ram_type - the RAM type that should be used for offset from + * enum comms_ram_types + * @status - status from enum comms_sts + */ +struct comms_status { + union { /* bit fields are only for FW use */ + struct { + unsigned int offset :26; + unsigned int ram_type :2; + enum comms_sts status :4; /* 16 statuses */ + }; + unsigned int val; + }; +}; + #endif /* HL_BOOT_IF_H */ -- cgit v1.2.3