From 141124e6e0db645396321aabed01c5e0b12cccc1 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 10 Jul 2015 15:23:17 +0900 Subject: misc: Drop owner assignment from i2c_driver i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Wolfram Sang --- drivers/misc/eeprom/at24.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/misc/eeprom') diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 6ded3dc36644..2b254f3a1154 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -686,7 +686,6 @@ static int at24_remove(struct i2c_client *client) static struct i2c_driver at24_driver = { .driver = { .name = "at24", - .owner = THIS_MODULE, }, .probe = at24_probe, .remove = at24_remove, -- cgit v1.2.3 From c49c1f0873faddf78c3545a8e25dfe23e8d15c2f Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Fri, 7 Aug 2015 14:04:19 +0200 Subject: misc: eeprom: Export I2C module alias information in missing drivers The I2C core always reports the MODALIAS uevent as "i2c:" regardless if the driver later is match using the I2C id_table or the of_match_table. So the driver needs to export the I2C table and this be built into the module or udev won't have the necessary information to auto load the correct module when the device is added. Signed-off-by: Javier Martinez Canillas Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang --- drivers/misc/eeprom/max6875.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/misc/eeprom') diff --git a/drivers/misc/eeprom/max6875.c b/drivers/misc/eeprom/max6875.c index 580ff9df5529..c74920cc3d18 100644 --- a/drivers/misc/eeprom/max6875.c +++ b/drivers/misc/eeprom/max6875.c @@ -197,6 +197,7 @@ static const struct i2c_device_id max6875_id[] = { { "max6875", 0 }, { } }; +MODULE_DEVICE_TABLE(i2c, max6875_id); static struct i2c_driver max6875_driver = { .driver = { -- cgit v1.2.3 From 2cd9fbd0ed5ef12bf550c06126ebbe720574fc0e Mon Sep 17 00:00:00 2001 From: Irina Tirdea Date: Wed, 12 Aug 2015 17:31:34 +0300 Subject: eeprom: at24: use i2c_smbus_read_i2c_block_data_or_emulated For i2c busses that support only SMBUS extensions, the eeprom at24 driver reads data from the device using the SMBus block, word or byte read protocols depending on availability. Replace the block read emulation from the driver with the i2c_smbus_read_i2c_block_data_or_emulated call from i2c core. Signed-off-by: Irina Tirdea Signed-off-by: Wolfram Sang --- drivers/misc/eeprom/at24.c | 37 ++++++------------------------------- 1 file changed, 6 insertions(+), 31 deletions(-) (limited to 'drivers/misc/eeprom') diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 2b254f3a1154..c6cb7f8f325e 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -186,19 +186,11 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, if (count > io_limit) count = io_limit; - switch (at24->use_smbus) { - case I2C_SMBUS_I2C_BLOCK_DATA: + if (at24->use_smbus) { /* Smaller eeproms can work given some SMBus extension calls */ if (count > I2C_SMBUS_BLOCK_MAX) count = I2C_SMBUS_BLOCK_MAX; - break; - case I2C_SMBUS_WORD_DATA: - count = 2; - break; - case I2C_SMBUS_BYTE_DATA: - count = 1; - break; - default: + } else { /* * When we have a better choice than SMBus calls, use a * combined I2C message. Write address; then read up to @@ -229,27 +221,10 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, timeout = jiffies + msecs_to_jiffies(write_timeout); do { read_time = jiffies; - switch (at24->use_smbus) { - case I2C_SMBUS_I2C_BLOCK_DATA: - status = i2c_smbus_read_i2c_block_data(client, offset, - count, buf); - break; - case I2C_SMBUS_WORD_DATA: - status = i2c_smbus_read_word_data(client, offset); - if (status >= 0) { - buf[0] = status & 0xff; - buf[1] = status >> 8; - status = count; - } - break; - case I2C_SMBUS_BYTE_DATA: - status = i2c_smbus_read_byte_data(client, offset); - if (status >= 0) { - buf[0] = status; - status = count; - } - break; - default: + if (at24->use_smbus) { + status = i2c_smbus_read_i2c_block_data_or_emulated(client, offset, + count, buf); + } else { status = i2c_transfer(client->adapter, msg, 2); if (status == 2) status = count; -- cgit v1.2.3