From 29b05e22f5c68c657f5ec30a31023b81124287fb Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 7 Dec 2016 13:48:10 -0200 Subject: [media] em28xx: use usb_interface for dev_foo() calls The usb_device->dev is not the right device for dev_foo() calls. Instead, it should use usb_interface->dev. Tested-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/em28xx/em28xx-audio.c | 34 ++++++------ drivers/media/usb/em28xx/em28xx-camera.c | 30 +++++------ drivers/media/usb/em28xx/em28xx-cards.c | 61 ++++++++++----------- drivers/media/usb/em28xx/em28xx-core.c | 48 ++++++++--------- drivers/media/usb/em28xx/em28xx-dvb.c | 61 ++++++++++----------- drivers/media/usb/em28xx/em28xx-i2c.c | 92 ++++++++++++++++---------------- drivers/media/usb/em28xx/em28xx-input.c | 32 +++++------ drivers/media/usb/em28xx/em28xx-vbi.c | 2 +- drivers/media/usb/em28xx/em28xx-video.c | 68 +++++++++++------------ drivers/media/usb/em28xx/em28xx.h | 1 + 10 files changed, 216 insertions(+), 213 deletions(-) (limited to 'drivers/media/usb') diff --git a/drivers/media/usb/em28xx/em28xx-audio.c b/drivers/media/usb/em28xx/em28xx-audio.c index 7060e5146e31..7f8601427b7f 100644 --- a/drivers/media/usb/em28xx/em28xx-audio.c +++ b/drivers/media/usb/em28xx/em28xx-audio.c @@ -56,7 +56,7 @@ MODULE_PARM_DESC(debug, "activates debug info"); #define dprintk(fmt, arg...) do { \ if (debug) \ - dev_printk(KERN_DEBUG, &dev->udev->dev, \ + dev_printk(KERN_DEBUG, &dev->intf->dev, \ "video: %s: " fmt, __func__, ## arg); \ } while (0) @@ -166,7 +166,7 @@ static void em28xx_audio_isocirq(struct urb *urb) status = usb_submit_urb(urb, GFP_ATOMIC); if (status < 0) - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "resubmit of audio urb failed (error=%i)\n", status); return; @@ -185,7 +185,7 @@ static int em28xx_init_audio_isoc(struct em28xx *dev) errCode = usb_submit_urb(dev->adev.urb[i], GFP_ATOMIC); if (errCode) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "submit of audio urb failed (error=%i)\n", errCode); em28xx_deinit_isoc_audio(dev); @@ -322,7 +322,7 @@ static int snd_em28xx_capture_open(struct snd_pcm_substream *substream) err: mutex_unlock(&dev->lock); - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "Error while configuring em28xx mixer\n"); return ret; } @@ -761,7 +761,7 @@ static int em28xx_audio_urb_init(struct em28xx *dev) intf = usb_ifnum_to_if(dev->udev, dev->ifnum); if (intf->num_altsetting <= alt) { - dev_err(&dev->udev->dev, "alt %d doesn't exist on interface %d\n", + dev_err(&dev->intf->dev, "alt %d doesn't exist on interface %d\n", dev->ifnum, alt); return -ENODEV; } @@ -777,14 +777,14 @@ static int em28xx_audio_urb_init(struct em28xx *dev) } if (!ep) { - dev_err(&dev->udev->dev, "Couldn't find an audio endpoint"); + dev_err(&dev->intf->dev, "Couldn't find an audio endpoint"); return -ENODEV; } ep_size = em28xx_audio_ep_packet_size(dev->udev, ep); interval = 1 << (ep->bInterval - 1); - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "Endpoint 0x%02x %s on intf %d alt %d interval = %d, size %d\n", EM28XX_EP_AUDIO, usb_speed_string(dev->udev->speed), dev->ifnum, alt, interval, ep_size); @@ -824,7 +824,7 @@ static int em28xx_audio_urb_init(struct em28xx *dev) if (urb_size > ep_size * npackets) npackets = DIV_ROUND_UP(urb_size, ep_size); - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "Number of URBs: %d, with %d packets and %d size\n", num_urb, npackets, urb_size); @@ -863,7 +863,7 @@ static int em28xx_audio_urb_init(struct em28xx *dev) buf = usb_alloc_coherent(dev->udev, npackets * ep_size, GFP_ATOMIC, &urb->transfer_dma); if (!buf) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "usb_alloc_coherent failed!\n"); em28xx_audio_free_urb(dev); return -ENOMEM; @@ -904,16 +904,16 @@ static int em28xx_audio_init(struct em28xx *dev) return 0; } - dev_info(&dev->udev->dev, "Binding audio extension\n"); + dev_info(&dev->intf->dev, "Binding audio extension\n"); kref_get(&dev->ref); - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "em28xx-audio.c: Copyright (C) 2006 Markus Rechberger\n"); - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "em28xx-audio.c: Copyright (C) 2007-2016 Mauro Carvalho Chehab\n"); - err = snd_card_new(&dev->udev->dev, index[devnr], "Em28xx Audio", + err = snd_card_new(&dev->intf->dev, index[devnr], "Em28xx Audio", THIS_MODULE, 0, &card); if (err < 0) return err; @@ -961,7 +961,7 @@ static int em28xx_audio_init(struct em28xx *dev) if (err < 0) goto urb_free; - dev_info(&dev->udev->dev, "Audio extension successfully initialized\n"); + dev_info(&dev->intf->dev, "Audio extension successfully initialized\n"); return 0; urb_free: @@ -986,7 +986,7 @@ static int em28xx_audio_fini(struct em28xx *dev) return 0; } - dev_info(&dev->udev->dev, "Closing audio extension\n"); + dev_info(&dev->intf->dev, "Closing audio extension\n"); if (dev->adev.sndcard) { snd_card_disconnect(dev->adev.sndcard); @@ -1010,7 +1010,7 @@ static int em28xx_audio_suspend(struct em28xx *dev) if (dev->usb_audio_type != EM28XX_USB_AUDIO_VENDOR) return 0; - dev_info(&dev->udev->dev, "Suspending audio extension\n"); + dev_info(&dev->intf->dev, "Suspending audio extension\n"); em28xx_deinit_isoc_audio(dev); atomic_set(&dev->adev.stream_started, 0); return 0; @@ -1024,7 +1024,7 @@ static int em28xx_audio_resume(struct em28xx *dev) if (dev->usb_audio_type != EM28XX_USB_AUDIO_VENDOR) return 0; - dev_info(&dev->udev->dev, "Resuming audio extension\n"); + dev_info(&dev->intf->dev, "Resuming audio extension\n"); /* Nothing to do other than schedule_work() ?? */ schedule_work(&dev->adev.wq_trigger); return 0; diff --git a/drivers/media/usb/em28xx/em28xx-camera.c b/drivers/media/usb/em28xx/em28xx-camera.c index 2e24b65901ec..89c890ba7dd6 100644 --- a/drivers/media/usb/em28xx/em28xx-camera.c +++ b/drivers/media/usb/em28xx/em28xx-camera.c @@ -121,14 +121,14 @@ static int em28xx_probe_sensor_micron(struct em28xx *dev) ret = i2c_master_send(&client, ®, 1); if (ret < 0) { if (ret != -ENXIO) - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", client.addr << 1, ret); continue; } ret = i2c_master_recv(&client, (u8 *)&id_be, 2); if (ret < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", client.addr << 1, ret); continue; @@ -138,14 +138,14 @@ static int em28xx_probe_sensor_micron(struct em28xx *dev) reg = 0xff; ret = i2c_master_send(&client, ®, 1); if (ret < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", client.addr << 1, ret); continue; } ret = i2c_master_recv(&client, (u8 *)&id_be, 2); if (ret < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", client.addr << 1, ret); continue; @@ -185,16 +185,16 @@ static int em28xx_probe_sensor_micron(struct em28xx *dev) dev->em28xx_sensor = EM28XX_MT9M001; break; default: - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "unknown Micron sensor detected: 0x%04x\n", id); return 0; } if (dev->em28xx_sensor == EM28XX_NOSENSOR) - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "unsupported sensor detected: %s\n", name); else - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "sensor %s detected\n", name); dev->i2c_client[dev->def_i2c_bus].addr = client.addr; @@ -225,7 +225,7 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev) ret = i2c_smbus_read_byte_data(&client, reg); if (ret < 0) { if (ret != -ENXIO) - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", client.addr << 1, ret); continue; @@ -234,7 +234,7 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev) reg = 0x1d; ret = i2c_smbus_read_byte_data(&client, reg); if (ret < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", client.addr << 1, ret); continue; @@ -247,7 +247,7 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev) reg = 0x0a; ret = i2c_smbus_read_byte_data(&client, reg); if (ret < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", client.addr << 1, ret); continue; @@ -256,7 +256,7 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev) reg = 0x0b; ret = i2c_smbus_read_byte_data(&client, reg); if (ret < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", client.addr << 1, ret); continue; @@ -296,17 +296,17 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev) name = "OV9655"; break; default: - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "unknown OmniVision sensor detected: 0x%04x\n", id); return 0; } if (dev->em28xx_sensor == EM28XX_NOSENSOR) - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "unsupported sensor detected: %s\n", name); else - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "sensor %s detected\n", name); dev->i2c_client[dev->def_i2c_bus].addr = client.addr; @@ -331,7 +331,7 @@ int em28xx_detect_sensor(struct em28xx *dev) */ if (dev->em28xx_sensor == EM28XX_NOSENSOR && ret < 0) { - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "No sensor detected\n"); return -ENODEV; } diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c index 50e4c6e51ee7..56739ce6ce16 100644 --- a/drivers/media/usb/em28xx/em28xx-cards.c +++ b/drivers/media/usb/em28xx/em28xx-cards.c @@ -2677,7 +2677,7 @@ static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev, msleep(50); } - dev_warn(&dev->udev->dev, "AC97 registers access is not reliable !\n"); + dev_warn(&dev->intf->dev, "AC97 registers access is not reliable !\n"); return -ETIMEDOUT; } @@ -2831,7 +2831,7 @@ static int em28xx_hint_board(struct em28xx *dev) dev->model = em28xx_eeprom_hash[i].model; dev->tuner_type = em28xx_eeprom_hash[i].tuner; - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "Your board has no unique USB ID.\n" "A hint were successfully done, based on eeprom hash.\n" "This method is not 100%% failproof.\n" @@ -2861,7 +2861,7 @@ static int em28xx_hint_board(struct em28xx *dev) if (dev->i2c_hash == em28xx_i2c_hash[i].hash) { dev->model = em28xx_i2c_hash[i].model; dev->tuner_type = em28xx_i2c_hash[i].tuner; - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "Your board has no unique USB ID.\n" "A hint were successfully done, based on i2c devicelist hash.\n" "This method is not 100%% failproof.\n" @@ -2874,7 +2874,7 @@ static int em28xx_hint_board(struct em28xx *dev) } } - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "Your board has no unique USB ID and thus need a hint to be detected.\n" "You may try to use card= insmod option to workaround that.\n" "Please send an email with this log to:\n" @@ -2883,10 +2883,10 @@ static int em28xx_hint_board(struct em28xx *dev) "Board i2c devicelist hash is 0x%08lx\n", dev->hash, dev->i2c_hash); - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "Here is a list of valid choices for the card= insmod option:\n"); for (i = 0; i < em28xx_bcount; i++) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, " card=%d -> %s\n", i, em28xx_boards[i].name); } return -1; @@ -2921,7 +2921,7 @@ static void em28xx_card_setup(struct em28xx *dev) * hash identities which has not been determined as yet. */ if (em28xx_hint_board(dev) < 0) - dev_err(&dev->udev->dev, "Board not discovered\n"); + dev_err(&dev->intf->dev, "Board not discovered\n"); else { em28xx_set_model(dev); em28xx_pre_card_setup(dev); @@ -2931,7 +2931,7 @@ static void em28xx_card_setup(struct em28xx *dev) em28xx_set_model(dev); } - dev_info(&dev->udev->dev, "Identified as %s (card=%d)\n", + dev_info(&dev->intf->dev, "Identified as %s (card=%d)\n", dev->board.name, dev->model); dev->tuner_type = em28xx_boards[dev->model].tuner_type; @@ -3030,7 +3030,7 @@ static void em28xx_card_setup(struct em28xx *dev) } if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "\n\n" "The support for this board weren't valid yet.\n" "Please send a report of having this working\n" @@ -3161,7 +3161,7 @@ static int em28xx_media_device_init(struct em28xx *dev, else if (udev->manufacturer) media_device_usb_init(mdev, udev, udev->manufacturer); else - media_device_usb_init(mdev, udev, dev_name(&dev->udev->dev)); + media_device_usb_init(mdev, udev, dev_name(&dev->intf->dev)); dev->media_dev = mdev; #endif @@ -3217,7 +3217,7 @@ void em28xx_free_device(struct kref *ref) { struct em28xx *dev = kref_to_dev(ref); - dev_info(&dev->udev->dev, "Freeing device\n"); + dev_info(&dev->intf->dev, "Freeing device\n"); if (!dev->disconnected) em28xx_release_resources(dev); @@ -3239,6 +3239,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, const char *chip_name = NULL; dev->udev = udev; + dev->intf = interface; mutex_init(&dev->ctrl_urb_lock); spin_lock_init(&dev->slock); @@ -3324,10 +3325,10 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, } } if (!chip_name) - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "unknown em28xx chip ID (%d)\n", dev->chip_id); else - dev_info(&dev->udev->dev, "chip ID is %s\n", chip_name); + dev_info(&dev->intf->dev, "chip ID is %s\n", chip_name); em28xx_media_device_init(dev, udev); @@ -3346,7 +3347,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, /* Resets I2C speed */ retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); if (retval < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "%s: em28xx_write_reg failed! retval [%d]\n", __func__, retval); return retval; @@ -3361,7 +3362,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, else retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX); if (retval < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "%s: em28xx_i2c_register bus 0 - error [%d]!\n", __func__, retval); return retval; @@ -3376,7 +3377,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, retval = em28xx_i2c_register(dev, 1, EM28XX_I2C_ALGO_EM28XX); if (retval < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "%s: em28xx_i2c_register bus 1 - error [%d]!\n", __func__, retval); @@ -3417,7 +3418,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); if (nr >= EM28XX_MAXBOARDS) { /* No free device slots */ - dev_err(&udev->dev, + dev_err(&interface->dev, "Driver supports up to %i em28xx boards.\n", EM28XX_MAXBOARDS); retval = -ENOMEM; @@ -3427,7 +3428,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, /* Don't register audio interfaces */ if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { - dev_err(&udev->dev, + dev_err(&interface->dev, "audio device (%04x:%04x): interface %i, class %i\n", le16_to_cpu(udev->descriptor.idVendor), le16_to_cpu(udev->descriptor.idProduct), @@ -3488,7 +3489,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, if (usb_endpoint_xfer_isoc(e)) { has_vendor_audio = true; } else { - dev_err(&udev->dev, + dev_err(&interface->dev, "error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); } break; @@ -3562,7 +3563,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, speed = "unknown"; } - dev_err(&udev->dev, + dev_err(&interface->dev, "New device %s %s @ %s Mbps (%04x:%04x, interface %d, class %d)\n", udev->manufacturer ? udev->manufacturer : "", udev->product ? udev->product : "", @@ -3578,8 +3579,8 @@ static int em28xx_usb_probe(struct usb_interface *interface, * not enough even for most Digital TV streams. */ if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { - dev_err(&udev->dev, "Device initialization failed.\n"); - dev_err(&udev->dev, + dev_err(&interface->dev, "Device initialization failed.\n"); + dev_err(&interface->dev, "Device must be connected to a high-speed USB 2.0 port.\n"); retval = -ENODEV; goto err_free; @@ -3593,7 +3594,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, dev->ifnum = ifnum; if (has_vendor_audio) { - dev_err(&udev->dev, + dev_err(&interface->dev, "Audio interface %i found (Vendor Class)\n", ifnum); dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR; } @@ -3603,7 +3604,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { if (has_vendor_audio) - dev_err(&udev->dev, + dev_err(&interface->dev, "em28xx: device seems to have vendor AND usb audio class interfaces !\n" "\t\tThe vendor interface will be ignored. Please contact the developers \n"); dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS; @@ -3612,12 +3613,12 @@ static int em28xx_usb_probe(struct usb_interface *interface, } if (has_video) - dev_err(&udev->dev, "Video interface %i found:%s%s\n", + dev_err(&interface->dev, "Video interface %i found:%s%s\n", ifnum, dev->analog_ep_bulk ? " bulk" : "", dev->analog_ep_isoc ? " isoc" : ""); if (has_dvb) - dev_err(&udev->dev, "DVB interface %i found:%s%s\n", + dev_err(&interface->dev, "DVB interface %i found:%s%s\n", ifnum, dev->dvb_ep_bulk ? " bulk" : "", dev->dvb_ep_isoc ? " isoc" : ""); @@ -3649,7 +3650,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, /* Disable V4L2 if the device doesn't have a decoder */ if (has_video && dev->board.decoder == EM28XX_NODECODER && !dev->board.is_webcam) { - dev_err(&udev->dev, + dev_err(&interface->dev, "Currently, V4L2 is not supported on this model\n"); has_video = false; dev->has_video = false; @@ -3659,13 +3660,13 @@ static int em28xx_usb_probe(struct usb_interface *interface, if (has_video) { if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) dev->analog_xfer_bulk = 1; - dev_err(&udev->dev, "analog set to %s mode.\n", + dev_err(&interface->dev, "analog set to %s mode.\n", dev->analog_xfer_bulk ? "bulk" : "isoc"); } if (has_dvb) { if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) dev->dvb_xfer_bulk = 1; - dev_err(&udev->dev, "dvb set to %s mode.\n", + dev_err(&interface->dev, "dvb set to %s mode.\n", dev->dvb_xfer_bulk ? "bulk" : "isoc"); } @@ -3713,7 +3714,7 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) dev->disconnected = 1; - dev_err(&dev->udev->dev, "Disconnecting\n"); + dev_err(&dev->intf->dev, "Disconnecting\n"); flush_request_modules(dev); diff --git a/drivers/media/usb/em28xx/em28xx-core.c b/drivers/media/usb/em28xx/em28xx-core.c index 7f1fe5d9d685..f1b4681f3c90 100644 --- a/drivers/media/usb/em28xx/em28xx-core.c +++ b/drivers/media/usb/em28xx/em28xx-core.c @@ -52,7 +52,7 @@ MODULE_PARM_DESC(core_debug, "enable debug messages [core and isoc]"); #define em28xx_coredbg(fmt, arg...) do { \ if (core_debug) \ - dev_printk(KERN_DEBUG, &dev->udev->dev, \ + dev_printk(KERN_DEBUG, &dev->intf->dev, \ "core: %s: " fmt, __func__, ## arg); \ } while (0) @@ -63,14 +63,14 @@ MODULE_PARM_DESC(reg_debug, "enable debug messages [URB reg]"); #define em28xx_regdbg(fmt, arg...) do { \ if (reg_debug) \ - dev_printk(KERN_DEBUG, &dev->udev->dev, \ + dev_printk(KERN_DEBUG, &dev->intf->dev, \ "reg: %s: " fmt, __func__, ## arg); \ } while (0) /* FIXME: don't abuse core_debug */ #define em28xx_isocdbg(fmt, arg...) do { \ if (core_debug) \ - dev_printk(KERN_DEBUG, &dev->udev->dev, \ + dev_printk(KERN_DEBUG, &dev->intf->dev, \ "core: %s: " fmt, __func__, ## arg); \ } while (0) @@ -258,7 +258,7 @@ static int em28xx_is_ac97_ready(struct em28xx *dev) msleep(5); } - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "AC97 command still being executed: not handled properly!\n"); return -EBUSY; } @@ -352,7 +352,7 @@ static int set_ac97_input(struct em28xx *dev) ret = em28xx_write_ac97(dev, inputs[i].reg, 0x8000); if (ret < 0) - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "couldn't setup AC97 register %d\n", inputs[i].reg); } @@ -437,7 +437,7 @@ int em28xx_audio_analog_set(struct em28xx *dev) for (i = 0; i < ARRAY_SIZE(outputs); i++) { ret = em28xx_write_ac97(dev, outputs[i].reg, 0x8000); if (ret < 0) - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "couldn't setup AC97 register %d\n", outputs[i].reg); } @@ -476,7 +476,7 @@ int em28xx_audio_analog_set(struct em28xx *dev) ret = em28xx_write_ac97(dev, outputs[i].reg, vol); if (ret < 0) - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "couldn't setup AC97 register %d\n", outputs[i].reg); } @@ -514,7 +514,7 @@ int em28xx_audio_setup(struct em28xx *dev) /* See how this device is configured */ cfg = em28xx_read_reg(dev, EM28XX_R00_CHIPCFG); - dev_info(&dev->udev->dev, "Config register raw data: 0x%02x\n", cfg); + dev_info(&dev->intf->dev, "Config register raw data: 0x%02x\n", cfg); if (cfg < 0) { /* Register read error */ /* Be conservative */ dev->int_audio_type = EM28XX_INT_AUDIO_AC97; @@ -535,7 +535,7 @@ int em28xx_audio_setup(struct em28xx *dev) i2s_samplerates = 5; else i2s_samplerates = 3; - dev_info(&dev->udev->dev, "I2S Audio (%d sample rate(s))\n", + dev_info(&dev->intf->dev, "I2S Audio (%d sample rate(s))\n", i2s_samplerates); /* Skip the code that does AC97 vendor detection */ dev->audio_mode.ac97 = EM28XX_NO_AC97; @@ -553,7 +553,7 @@ int em28xx_audio_setup(struct em28xx *dev) * Note: (some) em2800 devices without eeprom reports 0x91 on * CHIPCFG register, even not having an AC97 chip */ - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "AC97 chip type couldn't be determined\n"); dev->audio_mode.ac97 = EM28XX_NO_AC97; if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR) @@ -567,13 +567,13 @@ int em28xx_audio_setup(struct em28xx *dev) goto init_audio; vid = vid1 << 16 | vid2; - dev_warn(&dev->udev->dev, "AC97 vendor ID = 0x%08x\n", vid); + dev_warn(&dev->intf->dev, "AC97 vendor ID = 0x%08x\n", vid); feat = em28xx_read_ac97(dev, AC97_RESET); if (feat < 0) goto init_audio; - dev_warn(&dev->udev->dev, "AC97 features = 0x%04x\n", feat); + dev_warn(&dev->intf->dev, "AC97 features = 0x%04x\n", feat); /* Try to identify what audio processor we have */ if (((vid == 0xffffffff) || (vid == 0x83847650)) && (feat == 0x6a90)) @@ -585,19 +585,19 @@ init_audio: /* Reports detected AC97 processor */ switch (dev->audio_mode.ac97) { case EM28XX_NO_AC97: - dev_info(&dev->udev->dev, "No AC97 audio processor\n"); + dev_info(&dev->intf->dev, "No AC97 audio processor\n"); break; case EM28XX_AC97_EM202: - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "Empia 202 AC97 audio processor detected\n"); break; case EM28XX_AC97_SIGMATEL: - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "Sigmatel audio processor detected (stac 97%02x)\n", vid & 0xff); break; case EM28XX_AC97_OTHER: - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "Unknown AC97 audio processor detected!\n"); break; default: @@ -882,7 +882,7 @@ int em28xx_alloc_urbs(struct em28xx *dev, enum em28xx_mode mode, int xfer_bulk, if (mode == EM28XX_DIGITAL_MODE) { if ((xfer_bulk && !dev->dvb_ep_bulk) || (!xfer_bulk && !dev->dvb_ep_isoc)) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "no endpoint for DVB mode and transfer type %d\n", xfer_bulk > 0); return -EINVAL; @@ -891,14 +891,14 @@ int em28xx_alloc_urbs(struct em28xx *dev, enum em28xx_mode mode, int xfer_bulk, } else if (mode == EM28XX_ANALOG_MODE) { if ((xfer_bulk && !dev->analog_ep_bulk) || (!xfer_bulk && !dev->analog_ep_isoc)) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "no endpoint for analog mode and transfer type %d\n", xfer_bulk > 0); return -EINVAL; } usb_bufs = &dev->usb_ctl.analog_bufs; } else { - dev_err(&dev->udev->dev, "invalid mode selected\n"); + dev_err(&dev->intf->dev, "invalid mode selected\n"); return -EINVAL; } @@ -940,7 +940,7 @@ int em28xx_alloc_urbs(struct em28xx *dev, enum em28xx_mode mode, int xfer_bulk, usb_bufs->transfer_buffer[i] = usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL, &urb->transfer_dma); if (!usb_bufs->transfer_buffer[i]) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "unable to allocate %i bytes for transfer buffer %i%s\n", sb_size, i, in_interrupt() ? " while in int" : ""); @@ -1023,7 +1023,7 @@ int em28xx_init_usb_xfer(struct em28xx *dev, enum em28xx_mode mode, if (xfer_bulk) { rc = usb_clear_halt(dev->udev, usb_bufs->urb[0]->pipe); if (rc < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "failed to clear USB bulk endpoint stall/halt condition (error=%i)\n", rc); em28xx_uninit_usb_xfer(dev, mode); @@ -1040,7 +1040,7 @@ int em28xx_init_usb_xfer(struct em28xx *dev, enum em28xx_mode mode, for (i = 0; i < usb_bufs->num_bufs; i++) { rc = usb_submit_urb(usb_bufs->urb[i], GFP_ATOMIC); if (rc) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "submit of urb %i failed (error=%i)\n", i, rc); em28xx_uninit_usb_xfer(dev, mode); return rc; @@ -1123,7 +1123,7 @@ int em28xx_suspend_extension(struct em28xx *dev) { const struct em28xx_ops *ops = NULL; - dev_info(&dev->udev->dev, "Suspending extensions\n"); + dev_info(&dev->intf->dev, "Suspending extensions\n"); mutex_lock(&em28xx_devlist_mutex); list_for_each_entry(ops, &em28xx_extension_devlist, next) { if (ops->suspend) @@ -1137,7 +1137,7 @@ int em28xx_resume_extension(struct em28xx *dev) { const struct em28xx_ops *ops = NULL; - dev_info(&dev->udev->dev, "Resuming extensions\n"); + dev_info(&dev->intf->dev, "Resuming extensions\n"); mutex_lock(&em28xx_devlist_mutex); list_for_each_entry(ops, &em28xx_extension_devlist, next) { if (ops->resume) diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c index 445e51db636f..d7cfcbe3bf19 100644 --- a/drivers/media/usb/em28xx/em28xx-dvb.c +++ b/drivers/media/usb/em28xx/em28xx-dvb.c @@ -75,7 +75,7 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); #define dprintk(level, fmt, arg...) do { \ if (debug >= level) \ - dev_printk(KERN_DEBUG, &dev->udev->dev, \ + dev_printk(KERN_DEBUG, &dev->intf->dev, \ "dvb: " fmt, ## arg); \ } while (0) @@ -736,13 +736,13 @@ static int em28xx_pctv_290e_set_lna(struct dvb_frontend *fe) ret = gpio_request_one(dvb->lna_gpio, flags, NULL); if (ret) - dev_err(&dev->udev->dev, "gpio request failed %d\n", ret); + dev_err(&dev->intf->dev, "gpio request failed %d\n", ret); else gpio_free(dvb->lna_gpio); return ret; #else - dev_warn(&dev->udev->dev, "%s: LNA control is disabled (lna=%u)\n", + dev_warn(&dev->intf->dev, "%s: LNA control is disabled (lna=%u)\n", KBUILD_MODNAME, c->lna); return 0; #endif @@ -936,20 +936,20 @@ static int em28xx_attach_xc3028(u8 addr, struct em28xx *dev) cfg.ctrl = &ctl; if (!dev->dvb->fe[0]) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "dvb frontend not attached. Can't attach xc3028\n"); return -EINVAL; } fe = dvb_attach(xc2028_attach, dev->dvb->fe[0], &cfg); if (!fe) { - dev_err(&dev->udev->dev, "xc3028 attach failed\n"); + dev_err(&dev->intf->dev, "xc3028 attach failed\n"); dvb_frontend_detach(dev->dvb->fe[0]); dev->dvb->fe[0] = NULL; return -EINVAL; } - dev_info(&dev->udev->dev, "xc3028 attached\n"); + dev_info(&dev->intf->dev, "xc3028 attached\n"); return 0; } @@ -966,10 +966,10 @@ static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module, /* register adapter */ result = dvb_register_adapter(&dvb->adapter, - dev_name(&dev->udev->dev), module, + dev_name(&dev->intf->dev), module, device, adapter_nr); if (result < 0) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "dvb_register_adapter failed (errno = %d)\n", result); goto fail_adapter; @@ -988,7 +988,7 @@ static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module, /* register frontend */ result = dvb_register_frontend(&dvb->adapter, dvb->fe[0]); if (result < 0) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "dvb_register_frontend failed (errno = %d)\n", result); goto fail_frontend0; @@ -998,7 +998,7 @@ static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module, if (dvb->fe[1]) { result = dvb_register_frontend(&dvb->adapter, dvb->fe[1]); if (result < 0) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "2nd dvb_register_frontend failed (errno = %d)\n", result); goto fail_frontend1; @@ -1017,7 +1017,7 @@ static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module, result = dvb_dmx_init(&dvb->demux); if (result < 0) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "dvb_dmx_init failed (errno = %d)\n", result); goto fail_dmx; @@ -1028,7 +1028,7 @@ static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module, dvb->dmxdev.capabilities = 0; result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter); if (result < 0) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "dvb_dmxdev_init failed (errno = %d)\n", result); goto fail_dmxdev; @@ -1037,7 +1037,7 @@ static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module, dvb->fe_hw.source = DMX_FRONTEND_0; result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw); if (result < 0) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "add_frontend failed (DMX_FRONTEND_0, errno = %d)\n", result); goto fail_fe_hw; @@ -1046,7 +1046,7 @@ static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module, dvb->fe_mem.source = DMX_MEMORY_FE; result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem); if (result < 0) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "add_frontend failed (DMX_MEMORY_FE, errno = %d)\n", result); goto fail_fe_mem; @@ -1054,7 +1054,7 @@ static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module, result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw); if (result < 0) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "connect_frontend failed (errno = %d)\n", result); goto fail_fe_conn; @@ -1128,7 +1128,7 @@ static int em28xx_dvb_init(struct em28xx *dev) return 0; } - dev_info(&dev->udev->dev, "Binding DVB extension\n"); + dev_info(&dev->intf->dev, "Binding DVB extension\n"); dvb = kzalloc(sizeof(struct em28xx_dvb), GFP_KERNEL); if (!dvb) @@ -1152,7 +1152,7 @@ static int em28xx_dvb_init(struct em28xx *dev) EM28XX_DVB_NUM_ISOC_PACKETS); } if (result) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "failed to pre-allocate USB transfer buffers for DVB.\n"); kfree(dvb); dev->dvb = NULL; @@ -1270,7 +1270,8 @@ static int em28xx_dvb_init(struct em28xx *dev) case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: dvb->fe[0] = dvb_attach(drxd_attach, &em28xx_drxd, NULL, - &dev->i2c_adap[dev->def_i2c_bus], &dev->udev->dev); + &dev->i2c_adap[dev->def_i2c_bus], + &dev->intf->dev); if (em28xx_attach_xc3028(0x61, dev) < 0) { result = -EINVAL; goto out_free; @@ -1332,7 +1333,7 @@ static int em28xx_dvb_init(struct em28xx *dev) result = gpio_request_one(dvb->lna_gpio, GPIOF_OUT_INIT_LOW, NULL); if (result) - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "gpio request failed %d\n", result); else @@ -1949,12 +1950,12 @@ static int em28xx_dvb_init(struct em28xx *dev) } break; default: - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "The frontend of your DVB/ATSC card isn't supported yet\n"); break; } if (NULL == dvb->fe[0]) { - dev_err(&dev->udev->dev, "frontend initialization failed\n"); + dev_err(&dev->intf->dev, "frontend initialization failed\n"); result = -EINVAL; goto out_free; } @@ -1964,12 +1965,12 @@ static int em28xx_dvb_init(struct em28xx *dev) dvb->fe[1]->callback = em28xx_tuner_callback; /* register everything */ - result = em28xx_register_dvb(dvb, THIS_MODULE, dev, &dev->udev->dev); + result = em28xx_register_dvb(dvb, THIS_MODULE, dev, &dev->intf->dev); if (result < 0) goto out_free; - dev_info(&dev->udev->dev, "DVB extension successfully initialized\n"); + dev_info(&dev->intf->dev, "DVB extension successfully initialized\n"); kref_get(&dev->ref); @@ -2009,7 +2010,7 @@ static int em28xx_dvb_fini(struct em28xx *dev) if (!dev->dvb) return 0; - dev_info(&dev->udev->dev, "Closing DVB extension\n"); + dev_info(&dev->intf->dev, "Closing DVB extension\n"); dvb = dev->dvb; @@ -2067,17 +2068,17 @@ static int em28xx_dvb_suspend(struct em28xx *dev) if (!dev->board.has_dvb) return 0; - dev_info(&dev->udev->dev, "Suspending DVB extension\n"); + dev_info(&dev->intf->dev, "Suspending DVB extension\n"); if (dev->dvb) { struct em28xx_dvb *dvb = dev->dvb; if (dvb->fe[0]) { ret = dvb_frontend_suspend(dvb->fe[0]); - dev_info(&dev->udev->dev, "fe0 suspend %d\n", ret); + dev_info(&dev->intf->dev, "fe0 suspend %d\n", ret); } if (dvb->fe[1]) { dvb_frontend_suspend(dvb->fe[1]); - dev_info(&dev->udev->dev, "fe1 suspend %d\n", ret); + dev_info(&dev->intf->dev, "fe1 suspend %d\n", ret); } } @@ -2094,18 +2095,18 @@ static int em28xx_dvb_resume(struct em28xx *dev) if (!dev->board.has_dvb) return 0; - dev_info(&dev->udev->dev, "Resuming DVB extension\n"); + dev_info(&dev->intf->dev, "Resuming DVB extension\n"); if (dev->dvb) { struct em28xx_dvb *dvb = dev->dvb; if (dvb->fe[0]) { ret = dvb_frontend_resume(dvb->fe[0]); - dev_info(&dev->udev->dev, "fe0 resume %d\n", ret); + dev_info(&dev->intf->dev, "fe0 resume %d\n", ret); } if (dvb->fe[1]) { ret = dvb_frontend_resume(dvb->fe[1]); - dev_info(&dev->udev->dev, "fe1 resume %d\n", ret); + dev_info(&dev->intf->dev, "fe1 resume %d\n", ret); } } diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c index 00e39edc0837..8c472d5adb50 100644 --- a/drivers/media/usb/em28xx/em28xx-i2c.c +++ b/drivers/media/usb/em28xx/em28xx-i2c.c @@ -46,7 +46,7 @@ MODULE_PARM_DESC(i2c_debug, "i2c debug message level (1: normal debug, 2: show I #define dprintk(level, fmt, arg...) do { \ if (i2c_debug > level) \ - dev_printk(KERN_DEBUG, &dev->udev->dev, \ + dev_printk(KERN_DEBUG, &dev->intf->dev, \ "i2c: %s: " fmt, __func__, ## arg); \ } while (0) @@ -78,7 +78,7 @@ static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len) /* trigger write */ ret = dev->em28xx_write_regs(dev, 4 - len, &b2[4 - len], 2 + len); if (ret != 2 + len) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "failed to trigger write to i2c address 0x%x (error=%i)\n", addr, ret); return (ret < 0) ? ret : -EIO; @@ -93,7 +93,7 @@ static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len) return -ENXIO; } if (ret < 0) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "failed to get i2c transfer status from bridge register (error=%i)\n", ret); return ret; @@ -123,7 +123,7 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len) buf2[0] = addr; ret = dev->em28xx_write_regs(dev, 0x04, buf2, 2); if (ret != 2) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "failed to trigger read from i2c address 0x%x (error=%i)\n", addr, ret); return (ret < 0) ? ret : -EIO; @@ -140,7 +140,7 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len) return -ENXIO; } if (ret < 0) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "failed to get i2c transfer status from bridge register (error=%i)\n", ret); return ret; @@ -154,7 +154,7 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len) /* get the received message */ ret = dev->em28xx_read_reg_req_len(dev, 0x00, 4-len, buf2, len); if (ret != len) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "reading from i2c device at 0x%x failed: couldn't get the received message from the bridge (error=%i)\n", addr, ret); return (ret < 0) ? ret : -EIO; @@ -200,12 +200,12 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf, ret = dev->em28xx_write_regs_req(dev, stop ? 2 : 3, addr, buf, len); if (ret != len) { if (ret < 0) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "writing to i2c device at 0x%x failed (error=%i)\n", addr, ret); return ret; } else { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "%i bytes write to i2c device at 0x%x requested, but %i bytes written\n", len, addr, ret); return -EIO; @@ -223,7 +223,7 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf, return -ENXIO; } if (ret < 0) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "failed to get i2c transfer status from bridge register (error=%i)\n", ret); return ret; @@ -244,7 +244,7 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf, return -ETIMEDOUT; } - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "write to i2c device at 0x%x failed with unknown error (status=%i)\n", addr, ret); return -EIO; @@ -268,7 +268,7 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len) /* Read data from i2c device */ ret = dev->em28xx_read_reg_req_len(dev, 2, addr, buf, len); if (ret < 0) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "reading from i2c device at 0x%x failed (error=%i)\n", addr, ret); return ret; @@ -287,7 +287,7 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len) if (ret == 0) /* success */ return len; if (ret < 0) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "failed to get i2c transfer status from bridge register (error=%i)\n", ret); return ret; @@ -306,7 +306,7 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len) return -ETIMEDOUT; } - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "write to i2c device at 0x%x failed with unknown error (status=%i)\n", addr, ret); return -EIO; @@ -347,12 +347,12 @@ static int em25xx_bus_B_send_bytes(struct em28xx *dev, u16 addr, u8 *buf, ret = dev->em28xx_write_regs_req(dev, 0x06, addr, buf, len); if (ret != len) { if (ret < 0) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "writing to i2c device at 0x%x failed (error=%i)\n", addr, ret); return ret; } else { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "%i bytes write to i2c device at 0x%x requested, but %i bytes written\n", len, addr, ret); return -EIO; @@ -398,7 +398,7 @@ static int em25xx_bus_B_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, /* Read value */ ret = dev->em28xx_read_reg_req_len(dev, 0x06, addr, buf, len); if (ret < 0) { - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "reading from i2c device at 0x%x failed (error=%i)\n", addr, ret); return ret; @@ -672,7 +672,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, /* Check if board has eeprom */ err = i2c_master_recv(&dev->i2c_client[bus], &buf, 0); if (err < 0) { - dev_info(&dev->udev->dev, "board has no eeprom\n"); + dev_info(&dev->intf->dev, "board has no eeprom\n"); return -ENODEV; } @@ -685,7 +685,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, dev->eeprom_addrwidth_16bit, len, data); if (err != len) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "failed to read eeprom (err=%d)\n", err); goto error; } @@ -696,7 +696,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, 16, 1, data, len, true); if (dev->eeprom_addrwidth_16bit) - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "eeprom %06x: ... (skipped)\n", 256); } @@ -709,12 +709,12 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, dev->hash = em28xx_hash_mem(data, len, 32); mc_start = (data[1] << 8) + 4; /* usually 0x0004 */ - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "EEPROM ID = %02x %02x %02x %02x, EEPROM hash = 0x%08lx\n", data[0], data[1], data[2], data[3], dev->hash); - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "EEPROM info:\n"); - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "\tmicrocode start address = 0x%04x, boot configuration = 0x%02x\n", mc_start, data[2]); /* @@ -734,7 +734,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, err = em28xx_i2c_read_block(dev, bus, mc_start + 46, 1, 2, data); if (err != 2) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "failed to read hardware configuration data from eeprom (err=%d)\n", err); goto error; @@ -753,7 +753,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, err = em28xx_i2c_read_block(dev, bus, hwconf_offset, 1, len, data); if (err != len) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "failed to read hardware configuration data from eeprom (err=%d)\n", err); goto error; @@ -763,7 +763,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, /* NOTE: not all devices provide this type of dataset */ if (data[0] != 0x1a || data[1] != 0xeb || data[2] != 0x67 || data[3] != 0x95) { - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "\tno hardware configuration dataset found in eeprom\n"); kfree(data); return 0; @@ -775,13 +775,13 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, data[0] == 0x1a && data[1] == 0xeb && data[2] == 0x67 && data[3] == 0x95) { dev->hash = em28xx_hash_mem(data, len, 32); - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "EEPROM ID = %02x %02x %02x %02x, EEPROM hash = 0x%08lx\n", data[0], data[1], data[2], data[3], dev->hash); - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "EEPROM info:\n"); } else { - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "unknown eeprom format or eeprom corrupted !\n"); err = -ENODEV; goto error; @@ -793,50 +793,50 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, switch (le16_to_cpu(dev_config->chip_conf) >> 4 & 0x3) { case 0: - dev_info(&dev->udev->dev, "\tNo audio on board.\n"); + dev_info(&dev->intf->dev, "\tNo audio on board.\n"); break; case 1: - dev_info(&dev->udev->dev, "\tAC97 audio (5 sample rates)\n"); + dev_info(&dev->intf->dev, "\tAC97 audio (5 sample rates)\n"); break; case 2: if (dev->chip_id < CHIP_ID_EM2860) - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "\tI2S audio, sample rate=32k\n"); else - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "\tI2S audio, 3 sample rates\n"); break; case 3: if (dev->chip_id < CHIP_ID_EM2860) - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "\tI2S audio, 3 sample rates\n"); else - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "\tI2S audio, 5 sample rates\n"); break; } if (le16_to_cpu(dev_config->chip_conf) & 1 << 3) - dev_info(&dev->udev->dev, "\tUSB Remote wakeup capable\n"); + dev_info(&dev->intf->dev, "\tUSB Remote wakeup capable\n"); if (le16_to_cpu(dev_config->chip_conf) & 1 << 2) - dev_info(&dev->udev->dev, "\tUSB Self power capable\n"); + dev_info(&dev->intf->dev, "\tUSB Self power capable\n"); switch (le16_to_cpu(dev_config->chip_conf) & 0x3) { case 0: - dev_info(&dev->udev->dev, "\t500mA max power\n"); + dev_info(&dev->intf->dev, "\t500mA max power\n"); break; case 1: - dev_info(&dev->udev->dev, "\t400mA max power\n"); + dev_info(&dev->intf->dev, "\t400mA max power\n"); break; case 2: - dev_info(&dev->udev->dev, "\t300mA max power\n"); + dev_info(&dev->intf->dev, "\t300mA max power\n"); break; case 3: - dev_info(&dev->udev->dev, "\t200mA max power\n"); + dev_info(&dev->intf->dev, "\t200mA max power\n"); break; } - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "\tTable at offset 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n", dev_config->string_idx_table, le16_to_cpu(dev_config->string1), @@ -930,7 +930,7 @@ void em28xx_do_i2c_scan(struct em28xx *dev, unsigned bus) if (rc < 0) continue; i2c_devicelist[i] = i; - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "found i2c device @ 0x%x on bus %d [%s]\n", i << 1, bus, i2c_devs[i] ? i2c_devs[i] : "???"); } @@ -956,8 +956,8 @@ int em28xx_i2c_register(struct em28xx *dev, unsigned bus, return -ENODEV; dev->i2c_adap[bus] = em28xx_adap_template; - dev->i2c_adap[bus].dev.parent = &dev->udev->dev; - strcpy(dev->i2c_adap[bus].name, dev_name(&dev->udev->dev)); + dev->i2c_adap[bus].dev.parent = &dev->intf->dev; + strcpy(dev->i2c_adap[bus].name, dev_name(&dev->intf->dev)); dev->i2c_bus[bus].bus = bus; dev->i2c_bus[bus].algo_type = algo_type; @@ -966,7 +966,7 @@ int em28xx_i2c_register(struct em28xx *dev, unsigned bus, retval = i2c_add_adapter(&dev->i2c_adap[bus]); if (retval < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "%s: i2c_add_adapter failed! retval [%d]\n", __func__, retval); return retval; @@ -979,7 +979,7 @@ int em28xx_i2c_register(struct em28xx *dev, unsigned bus, if (!bus) { retval = em28xx_i2c_eeprom(dev, bus, &dev->eedata, &dev->eedata_len); if ((retval < 0) && (retval != -ENODEV)) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "%s: em28xx_i2_eeprom failed! retval [%d]\n", __func__, retval); diff --git a/drivers/media/usb/em28xx/em28xx-input.c b/drivers/media/usb/em28xx/em28xx-input.c index a1904e2230ea..0082ea6d6c08 100644 --- a/drivers/media/usb/em28xx/em28xx-input.c +++ b/drivers/media/usb/em28xx/em28xx-input.c @@ -43,7 +43,7 @@ MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]"); #define dprintk( fmt, arg...) do { \ if (ir_debug) \ - dev_printk(KERN_DEBUG, &ir->dev->udev->dev, \ + dev_printk(KERN_DEBUG, &ir->dev->intf->dev, \ "input: %s: " fmt, __func__, ## arg); \ } while (0) @@ -459,7 +459,7 @@ static int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 *rc_type) case CHIP_ID_EM28178: return em2874_ir_change_protocol(rc_dev, rc_type); default: - dev_err(&ir->dev->udev->dev, + dev_err(&ir->dev->intf->dev, "Unrecognized em28xx chip id 0x%02x: IR not supported\n", dev->chip_id); return -EINVAL; @@ -569,7 +569,7 @@ static int em28xx_register_snapshot_button(struct em28xx *dev) struct input_dev *input_dev; int err; - dev_info(&dev->udev->dev, "Registering snapshot button...\n"); + dev_info(&dev->intf->dev, "Registering snapshot button...\n"); input_dev = input_allocate_device(); if (!input_dev) return -ENOMEM; @@ -589,11 +589,11 @@ static int em28xx_register_snapshot_button(struct em28xx *dev) input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor); input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct); input_dev->id.version = 1; - input_dev->dev.parent = &dev->udev->dev; + input_dev->dev.parent = &dev->intf->dev; err = input_register_device(input_dev); if (err) { - dev_err(&dev->udev->dev, "input_register_device failed\n"); + dev_err(&dev->intf->dev, "input_register_device failed\n"); input_free_device(input_dev); return err; } @@ -633,7 +633,7 @@ static void em28xx_init_buttons(struct em28xx *dev) } else if (button->role == EM28XX_BUTTON_ILLUMINATION) { /* Check sanity */ if (!em28xx_find_led(dev, EM28XX_LED_ILLUMINATION)) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "BUG: illumination button defined, but no illumination LED.\n"); goto next_button; } @@ -670,7 +670,7 @@ static void em28xx_shutdown_buttons(struct em28xx *dev) dev->num_button_polling_addresses = 0; /* Deregister input devices */ if (dev->sbutton_input_dev != NULL) { - dev_info(&dev->udev->dev, "Deregistering snapshot button\n"); + dev_info(&dev->intf->dev, "Deregistering snapshot button\n"); input_unregister_device(dev->sbutton_input_dev); dev->sbutton_input_dev = NULL; } @@ -699,7 +699,7 @@ static int em28xx_ir_init(struct em28xx *dev) i2c_rc_dev_addr = em28xx_probe_i2c_ir(dev); if (!i2c_rc_dev_addr) { dev->board.has_ir_i2c = 0; - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "No i2c IR remote control device found.\n"); return -ENODEV; } @@ -707,12 +707,12 @@ static int em28xx_ir_init(struct em28xx *dev) if (dev->board.ir_codes == NULL && !dev->board.has_ir_i2c) { /* No remote control support */ - dev_warn(&dev->udev->dev, + dev_warn(&dev->intf->dev, "Remote control support is not available for this card.\n"); return 0; } - dev_info(&dev->udev->dev, "Registering input extension\n"); + dev_info(&dev->intf->dev, "Registering input extension\n"); ir = kzalloc(sizeof(*ir), GFP_KERNEL); if (!ir) @@ -797,7 +797,7 @@ static int em28xx_ir_init(struct em28xx *dev) /* init input device */ snprintf(ir->name, sizeof(ir->name), "%s IR", - dev_name(&dev->udev->dev)); + dev_name(&dev->intf->dev)); usb_make_path(dev->udev, ir->phys, sizeof(ir->phys)); strlcat(ir->phys, "/input0", sizeof(ir->phys)); @@ -808,7 +808,7 @@ static int em28xx_ir_init(struct em28xx *dev) rc->input_id.version = 1; rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor); rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct); - rc->dev.parent = &dev->udev->dev; + rc->dev.parent = &dev->intf->dev; rc->driver_name = MODULE_NAME; /* all done */ @@ -816,7 +816,7 @@ static int em28xx_ir_init(struct em28xx *dev) if (err) goto error; - dev_info(&dev->udev->dev, "Input extension successfully initalized\n"); + dev_info(&dev->intf->dev, "Input extension successfully initalized\n"); return 0; @@ -837,7 +837,7 @@ static int em28xx_ir_fini(struct em28xx *dev) return 0; } - dev_info(&dev->udev->dev, "Closing input extension\n"); + dev_info(&dev->intf->dev, "Closing input extension\n"); em28xx_shutdown_buttons(dev); @@ -866,7 +866,7 @@ static int em28xx_ir_suspend(struct em28xx *dev) if (dev->is_audio_only) return 0; - dev_info(&dev->udev->dev, "Suspending input extension\n"); + dev_info(&dev->intf->dev, "Suspending input extension\n"); if (ir) cancel_delayed_work_sync(&ir->work); cancel_delayed_work_sync(&dev->buttons_query_work); @@ -883,7 +883,7 @@ static int em28xx_ir_resume(struct em28xx *dev) if (dev->is_audio_only) return 0; - dev_info(&dev->udev->dev, "Resuming input extension\n"); + dev_info(&dev->intf->dev, "Resuming input extension\n"); /* if suspend calls ir_raw_event_unregister(), the should call ir_raw_event_register() */ if (ir) diff --git a/drivers/media/usb/em28xx/em28xx-vbi.c b/drivers/media/usb/em28xx/em28xx-vbi.c index 1b21d001cc7e..0bac552bbe87 100644 --- a/drivers/media/usb/em28xx/em28xx-vbi.c +++ b/drivers/media/usb/em28xx/em28xx-vbi.c @@ -65,7 +65,7 @@ static int vbi_buffer_prepare(struct vb2_buffer *vb) size = v4l2->vbi_width * v4l2->vbi_height * 2; if (vb2_plane_size(vb, 0) < size) { - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "%s data will not fit into plane (%lu < %lu)\n", __func__, vb2_plane_size(vb, 0), size); return -EINVAL; diff --git a/drivers/media/usb/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c index 2d282ed9aac0..4780f6492329 100644 --- a/drivers/media/usb/em28xx/em28xx-video.c +++ b/drivers/media/usb/em28xx/em28xx-video.c @@ -66,13 +66,13 @@ MODULE_PARM_DESC(alt, "alternate setting to use for video endpoint"); #define em28xx_videodbg(fmt, arg...) do { \ if (video_debug) \ - dev_printk(KERN_DEBUG, &dev->udev->dev, \ + dev_printk(KERN_DEBUG, &dev->intf->dev, \ "video: %s: " fmt, __func__, ## arg); \ } while (0) #define em28xx_isocdbg(fmt, arg...) do {\ if (isoc_debug) \ - dev_printk(KERN_DEBUG, &dev->udev->dev, \ + dev_printk(KERN_DEBUG, &dev->intf->dev, \ "isoc: %s: " fmt, __func__, ## arg); \ } while (0) @@ -413,7 +413,7 @@ set_alt: dev->alt, dev->max_pkt_size); errCode = usb_set_interface(dev->udev, dev->ifnum, dev->alt); if (errCode < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "cannot change alternate number to %d (error=%i)\n", dev->alt, errCode); return errCode; @@ -926,7 +926,7 @@ static int em28xx_enable_analog_tuner(struct em28xx *dev) ret = media_entity_setup_link(link, flags); if (ret) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "Couldn't change link %s->%s to %s. Error %d\n", source->name, sink->name, flags ? "enabled" : "disabled", @@ -958,7 +958,7 @@ static void em28xx_v4l2_create_entities(struct em28xx *dev) v4l2->video_pad.flags = MEDIA_PAD_FL_SINK; ret = media_entity_pads_init(&v4l2->vdev.entity, 1, &v4l2->video_pad); if (ret < 0) - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "failed to initialize video media entity!\n"); if (em28xx_vbi_supported(dev)) { @@ -966,7 +966,7 @@ static void em28xx_v4l2_create_entities(struct em28xx *dev) ret = media_entity_pads_init(&v4l2->vbi_dev.entity, 1, &v4l2->vbi_pad); if (ret < 0) - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "failed to initialize vbi media entity!\n"); } @@ -1000,12 +1000,12 @@ static void em28xx_v4l2_create_entities(struct em28xx *dev) ret = media_entity_pads_init(ent, 1, &dev->input_pad[i]); if (ret < 0) - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "failed to initialize input pad[%d]!\n", i); ret = media_device_register_entity(dev->media_dev, ent); if (ret < 0) - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "failed to register input entity %d!\n", i); } #endif @@ -2053,7 +2053,7 @@ static int em28xx_v4l2_open(struct file *filp) ret = v4l2_fh_open(filp); if (ret) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "%s: v4l2_fh_open() returned error %d\n", __func__, ret); mutex_unlock(&dev->lock); @@ -2109,7 +2109,7 @@ static int em28xx_v4l2_fini(struct em28xx *dev) if (v4l2 == NULL) return 0; - dev_info(&dev->udev->dev, "Closing video extension\n"); + dev_info(&dev->intf->dev, "Closing video extension\n"); mutex_lock(&dev->lock); @@ -2120,17 +2120,17 @@ static int em28xx_v4l2_fini(struct em28xx *dev) em28xx_v4l2_media_release(dev); if (video_is_registered(&v4l2->radio_dev)) { - dev_info(&dev->udev->dev, "V4L2 device %s deregistered\n", + dev_info(&dev->intf->dev, "V4L2 device %s deregistered\n", video_device_node_name(&v4l2->radio_dev)); video_unregister_device(&v4l2->radio_dev); } if (video_is_registered(&v4l2->vbi_dev)) { - dev_info(&dev->udev->dev, "V4L2 device %s deregistered\n", + dev_info(&dev->intf->dev, "V4L2 device %s deregistered\n", video_device_node_name(&v4l2->vbi_dev)); video_unregister_device(&v4l2->vbi_dev); } if (video_is_registered(&v4l2->vdev)) { - dev_info(&dev->udev->dev, "V4L2 device %s deregistered\n", + dev_info(&dev->intf->dev, "V4L2 device %s deregistered\n", video_device_node_name(&v4l2->vdev)); video_unregister_device(&v4l2->vdev); } @@ -2160,7 +2160,7 @@ static int em28xx_v4l2_suspend(struct em28xx *dev) if (!dev->has_video) return 0; - dev_info(&dev->udev->dev, "Suspending video extension\n"); + dev_info(&dev->intf->dev, "Suspending video extension\n"); em28xx_stop_urbs(dev); return 0; } @@ -2173,7 +2173,7 @@ static int em28xx_v4l2_resume(struct em28xx *dev) if (!dev->has_video) return 0; - dev_info(&dev->udev->dev, "Resuming video extension\n"); + dev_info(&dev->intf->dev, "Resuming video extension\n"); /* what do we do here */ return 0; } @@ -2210,7 +2210,7 @@ static int em28xx_v4l2_close(struct file *filp) em28xx_videodbg("setting alternate 0\n"); errCode = usb_set_interface(dev->udev, 0, 0); if (errCode < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "cannot change alternate number to 0 (error=%i)\n", errCode); } @@ -2345,7 +2345,7 @@ static void em28xx_vdev_init(struct em28xx *dev, vfd->tvnorms = 0; snprintf(vfd->name, sizeof(vfd->name), "%s %s", - dev_name(&dev->udev->dev), type_name); + dev_name(&dev->intf->dev), type_name); video_set_drvdata(vfd, dev); } @@ -2429,7 +2429,7 @@ static int em28xx_v4l2_init(struct em28xx *dev) return 0; } - dev_info(&dev->udev->dev, "Registering V4L2 extension\n"); + dev_info(&dev->intf->dev, "Registering V4L2 extension\n"); mutex_lock(&dev->lock); @@ -2445,9 +2445,9 @@ static int em28xx_v4l2_init(struct em28xx *dev) #ifdef CONFIG_MEDIA_CONTROLLER v4l2->v4l2_dev.mdev = dev->media_dev; #endif - ret = v4l2_device_register(&dev->udev->dev, &v4l2->v4l2_dev); + ret = v4l2_device_register(&dev->intf->dev, &v4l2->v4l2_dev); if (ret < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "Call to v4l2_device_register() failed!\n"); goto err; } @@ -2532,7 +2532,7 @@ static int em28xx_v4l2_init(struct em28xx *dev) /* Configure audio */ ret = em28xx_audio_setup(dev); if (ret < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "%s: Error while setting audio - error [%d]!\n", __func__, ret); goto unregister_dev; @@ -2561,7 +2561,7 @@ static int em28xx_v4l2_init(struct em28xx *dev) /* Send a reset to other chips via gpio */ ret = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); if (ret < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "%s: em28xx_write_reg - msp34xx(1) failed! error [%d]\n", __func__, ret); goto unregister_dev; @@ -2570,7 +2570,7 @@ static int em28xx_v4l2_init(struct em28xx *dev) ret = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); if (ret < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "%s: em28xx_write_reg - msp34xx(2) failed! error [%d]\n", __func__, ret); goto unregister_dev; @@ -2673,7 +2673,7 @@ static int em28xx_v4l2_init(struct em28xx *dev) ret = video_register_device(&v4l2->vdev, VFL_TYPE_GRABBER, video_nr[dev->devno]); if (ret) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "unable to register video device (error=%i).\n", ret); goto unregister_dev; } @@ -2703,7 +2703,7 @@ static int em28xx_v4l2_init(struct em28xx *dev) ret = video_register_device(&v4l2->vbi_dev, VFL_TYPE_VBI, vbi_nr[dev->devno]); if (ret < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "unable to register vbi device\n"); goto unregister_dev; } @@ -2715,11 +2715,11 @@ static int em28xx_v4l2_init(struct em28xx *dev) ret = video_register_device(&v4l2->radio_dev, VFL_TYPE_RADIO, radio_nr[dev->devno]); if (ret < 0) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "can't register radio device\n"); goto unregister_dev; } - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "Registered radio device as %s\n", video_device_node_name(&v4l2->radio_dev)); } @@ -2730,19 +2730,19 @@ static int em28xx_v4l2_init(struct em28xx *dev) #ifdef CONFIG_MEDIA_CONTROLLER ret = v4l2_mc_create_media_graph(dev->media_dev); if (ret) { - dev_err(&dev->udev->dev, + dev_err(&dev->intf->dev, "failed to create media graph\n"); em28xx_v4l2_media_release(dev); goto unregister_dev; } #endif - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "V4L2 video device registered as %s\n", video_device_node_name(&v4l2->vdev)); if (video_is_registered(&v4l2->vbi_dev)) - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "V4L2 VBI device registered as %s\n", video_device_node_name(&v4l2->vbi_dev)); @@ -2752,7 +2752,7 @@ static int em28xx_v4l2_init(struct em28xx *dev) /* initialize videobuf2 stuff */ em28xx_vb2_setup(dev); - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "V4L2 extension successfully initialized\n"); kref_get(&dev->ref); @@ -2762,19 +2762,19 @@ static int em28xx_v4l2_init(struct em28xx *dev) unregister_dev: if (video_is_registered(&v4l2->radio_dev)) { - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "V4L2 device %s deregistered\n", video_device_node_name(&v4l2->radio_dev)); video_unregister_device(&v4l2->radio_dev); } if (video_is_registered(&v4l2->vbi_dev)) { - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "V4L2 device %s deregistered\n", video_device_node_name(&v4l2->vbi_dev)); video_unregister_device(&v4l2->vbi_dev); } if (video_is_registered(&v4l2->vdev)) { - dev_info(&dev->udev->dev, + dev_info(&dev->intf->dev, "V4L2 device %s deregistered\n", video_device_node_name(&v4l2->vdev)); video_unregister_device(&v4l2->vdev); diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h index 3e5ace497a4e..5182b1bf0d15 100644 --- a/drivers/media/usb/em28xx/em28xx.h +++ b/drivers/media/usb/em28xx/em28xx.h @@ -678,6 +678,7 @@ struct em28xx { /* usb transfer */ struct usb_device *udev; /* the usb device */ + struct usb_interface *intf; /* the usb interface */ u8 ifnum; /* number of the assigned usb interface */ u8 analog_ep_isoc; /* address of isoc endpoint for analog */ u8 analog_ep_bulk; /* address of bulk endpoint for analog */ -- cgit v1.2.3