From d8469e93a4af82110b15b28bbb003a1dbe4258d2 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 18 Apr 2016 16:05:24 +0200 Subject: iio: pressure: hp03: Add Hope RF HP03 sensor support Add support for HopeRF pressure and temperature sensor. This device uses two fixed I2C addresses, one for storing calibration coefficients and another for accessing the ADC. Signed-off-by: Marek Vasut Cc: Matt Ranostay Cc: Jonathan Cameron Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/Kconfig | 11 ++ drivers/iio/pressure/Makefile | 1 + drivers/iio/pressure/hp03.c | 312 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 324 insertions(+) create mode 100644 drivers/iio/pressure/hp03.c (limited to 'drivers/iio/pressure') diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 8de0192adea6..54c616520512 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -30,6 +30,17 @@ config HID_SENSOR_PRESS To compile this driver as a module, choose M here: the module will be called hid-sensor-press. +config HP03 + tristate "Hope RF HP03 temperature and pressure sensor driver" + depends on I2C + select REGMAP_I2C + help + Say yes here to build support for Hope RF HP03 pressure and + temperature sensor. + + To compile this driver as a module, choose M here: the module + will be called hp03. + config MPL115 tristate diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index 6e60863c1086..17d6e7afa1ff 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -5,6 +5,7 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_BMP280) += bmp280.o obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o +obj-$(CONFIG_HP03) += hp03.o obj-$(CONFIG_MPL115) += mpl115.o obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o diff --git a/drivers/iio/pressure/hp03.c b/drivers/iio/pressure/hp03.c new file mode 100644 index 000000000000..ac76515d5d49 --- /dev/null +++ b/drivers/iio/pressure/hp03.c @@ -0,0 +1,312 @@ +/* + * Copyright (c) 2016 Marek Vasut + * + * Driver for Hope RF HP03 digital temperature and pressure sensor. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) "hp03: " fmt + +#include +#include +#include +#include +#include +#include +#include + +/* + * The HP03 sensor occupies two fixed I2C addresses: + * 0x50 ... read-only EEPROM with calibration data + * 0x77 ... read-write ADC for pressure and temperature + */ +#define HP03_EEPROM_ADDR 0x50 +#define HP03_ADC_ADDR 0x77 + +#define HP03_EEPROM_CX_OFFSET 0x10 +#define HP03_EEPROM_AB_OFFSET 0x1e +#define HP03_EEPROM_CD_OFFSET 0x20 + +#define HP03_ADC_WRITE_REG 0xff +#define HP03_ADC_READ_REG 0xfd +#define HP03_ADC_READ_PRESSURE 0xf0 /* D1 in datasheet */ +#define HP03_ADC_READ_TEMP 0xe8 /* D2 in datasheet */ + +struct hp03_priv { + struct i2c_client *client; + struct mutex lock; + struct gpio_desc *xclr_gpio; + + struct i2c_client *eeprom_client; + struct regmap *eeprom_regmap; + + s32 pressure; /* kPa */ + s32 temp; /* Deg. C */ +}; + +static const struct iio_chan_spec hp03_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + }, +}; + +static bool hp03_is_writeable_reg(struct device *dev, unsigned int reg) +{ + return false; +} + +static bool hp03_is_volatile_reg(struct device *dev, unsigned int reg) +{ + return false; +} + +static const struct regmap_config hp03_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = HP03_EEPROM_CD_OFFSET + 1, + .cache_type = REGCACHE_RBTREE, + + .writeable_reg = hp03_is_writeable_reg, + .volatile_reg = hp03_is_volatile_reg, +}; + +static int hp03_get_temp_pressure(struct hp03_priv *priv, const u8 reg) +{ + int ret; + + ret = i2c_smbus_write_byte_data(priv->client, HP03_ADC_WRITE_REG, reg); + if (ret < 0) + return ret; + + msleep(50); /* Wait for conversion to finish */ + + return i2c_smbus_read_word_data(priv->client, HP03_ADC_READ_REG); +} + +static int hp03_update_temp_pressure(struct hp03_priv *priv) +{ + struct device *dev = &priv->client->dev; + u8 coefs[18]; + u16 cx_val[7]; + int ab_val, d1_val, d2_val, diff_val, dut, off, sens, x; + int i, ret; + + /* Sample coefficients from EEPROM */ + ret = regmap_bulk_read(priv->eeprom_regmap, HP03_EEPROM_CX_OFFSET, + coefs, sizeof(coefs)); + if (ret < 0) { + dev_err(dev, "Failed to read EEPROM (reg=%02x)\n", + HP03_EEPROM_CX_OFFSET); + return ret; + } + + /* Sample Temperature and Pressure */ + gpiod_set_value_cansleep(priv->xclr_gpio, 1); + + ret = hp03_get_temp_pressure(priv, HP03_ADC_READ_PRESSURE); + if (ret < 0) { + dev_err(dev, "Failed to read pressure\n"); + goto err_adc; + } + d1_val = ret; + + ret = hp03_get_temp_pressure(priv, HP03_ADC_READ_TEMP); + if (ret < 0) { + dev_err(dev, "Failed to read temperature\n"); + goto err_adc; + } + d2_val = ret; + + gpiod_set_value_cansleep(priv->xclr_gpio, 0); + + /* The Cx coefficients and Temp/Pressure values are MSB first. */ + for (i = 0; i < 7; i++) + cx_val[i] = (coefs[2 * i] << 8) | (coefs[(2 * i) + 1] << 0); + d1_val = ((d1_val >> 8) & 0xff) | ((d1_val & 0xff) << 8); + d2_val = ((d2_val >> 8) & 0xff) | ((d2_val & 0xff) << 8); + + /* Coefficient voodoo from the HP03 datasheet. */ + if (d2_val >= cx_val[4]) + ab_val = coefs[14]; /* A-value */ + else + ab_val = coefs[15]; /* B-value */ + + diff_val = d2_val - cx_val[4]; + dut = (ab_val * (diff_val >> 7) * (diff_val >> 7)) >> coefs[16]; + dut = diff_val - dut; + + off = (cx_val[1] + (((cx_val[3] - 1024) * dut) >> 14)) * 4; + sens = cx_val[0] + ((cx_val[2] * dut) >> 10); + x = ((sens * (d1_val - 7168)) >> 14) - off; + + priv->pressure = ((x * 100) >> 5) + (cx_val[6] * 10); + priv->temp = 250 + ((dut * cx_val[5]) >> 16) - (dut >> coefs[17]); + + return 0; + +err_adc: + gpiod_set_value_cansleep(priv->xclr_gpio, 0); + return ret; +} + +static int hp03_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct hp03_priv *priv = iio_priv(indio_dev); + int ret; + + mutex_lock(&priv->lock); + ret = hp03_update_temp_pressure(priv); + mutex_unlock(&priv->lock); + + if (ret) + return ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_PRESSURE: + *val = priv->pressure; + return IIO_VAL_INT; + case IIO_TEMP: + *val = priv->temp; + return IIO_VAL_INT; + default: + return -EINVAL; + } + break; + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_PRESSURE: + *val = 0; + *val2 = 1000; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_TEMP: + *val = 10; + return IIO_VAL_INT; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + return -EINVAL; +} + +static const struct iio_info hp03_info = { + .driver_module = THIS_MODULE, + .read_raw = &hp03_read_raw, +}; + +static int hp03_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct iio_dev *indio_dev; + struct hp03_priv *priv; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); + if (!indio_dev) + return -ENOMEM; + + priv = iio_priv(indio_dev); + priv->client = client; + mutex_init(&priv->lock); + + indio_dev->dev.parent = dev; + indio_dev->name = id->name; + indio_dev->channels = hp03_channels; + indio_dev->num_channels = ARRAY_SIZE(hp03_channels); + indio_dev->info = &hp03_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + priv->xclr_gpio = devm_gpiod_get_index(dev, "xclr", 0, GPIOD_OUT_HIGH); + if (IS_ERR(priv->xclr_gpio)) { + dev_err(dev, "Failed to claim XCLR GPIO\n"); + ret = PTR_ERR(priv->xclr_gpio); + return ret; + } + + /* + * Allocate another device for the on-sensor EEPROM, + * which has it's dedicated I2C address and contains + * the calibration constants for the sensor. + */ + priv->eeprom_client = i2c_new_dummy(client->adapter, HP03_EEPROM_ADDR); + if (!priv->eeprom_client) { + dev_err(dev, "New EEPROM I2C device failed\n"); + return -ENODEV; + } + + priv->eeprom_regmap = regmap_init_i2c(priv->eeprom_client, + &hp03_regmap_config); + if (IS_ERR(priv->eeprom_regmap)) { + dev_err(dev, "Failed to allocate EEPROM regmap\n"); + ret = PTR_ERR(priv->eeprom_regmap); + goto err_cleanup_eeprom_client; + } + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(dev, "Failed to register IIO device\n"); + goto err_cleanup_eeprom_regmap; + } + + i2c_set_clientdata(client, indio_dev); + + return 0; + +err_cleanup_eeprom_regmap: + regmap_exit(priv->eeprom_regmap); + +err_cleanup_eeprom_client: + i2c_unregister_device(priv->eeprom_client); + return ret; +} + +static int hp03_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct hp03_priv *priv = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + regmap_exit(priv->eeprom_regmap); + i2c_unregister_device(priv->eeprom_client); + + return 0; +} + +static const struct i2c_device_id hp03_id[] = { + { "hp03", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, hp03_id); + +static struct i2c_driver hp03_driver = { + .driver = { + .name = "hp03", + }, + .probe = hp03_probe, + .remove = hp03_remove, + .id_table = hp03_id, +}; +module_i2c_driver(hp03_driver); + +MODULE_AUTHOR("Marek Vasut "); +MODULE_DESCRIPTION("Driver for Hope RF HP03 pressure and temperature sensor"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3