From ccea1f5acff94e0796300670a390b4b61e00480a Mon Sep 17 00:00:00 2001 From: Sergiu Cuciurean Date: Thu, 27 Feb 2020 14:34:27 +0200 Subject: iio: adc: ti-tlc4541: Use new structure for SPI transfer delays In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ti-tlc4541.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/iio/adc') diff --git a/drivers/iio/adc/ti-tlc4541.c b/drivers/iio/adc/ti-tlc4541.c index 4965246808bd..77620359b54c 100644 --- a/drivers/iio/adc/ti-tlc4541.c +++ b/drivers/iio/adc/ti-tlc4541.c @@ -189,7 +189,8 @@ static int tlc4541_probe(struct spi_device *spi) /* Setup default message */ st->scan_single_xfer[0].rx_buf = &st->rx_buf[0]; st->scan_single_xfer[0].len = 3; - st->scan_single_xfer[1].delay_usecs = 3; + st->scan_single_xfer[1].delay.value = 3; + st->scan_single_xfer[1].delay.unit = SPI_DELAY_UNIT_NSECS; st->scan_single_xfer[2].rx_buf = &st->rx_buf[0]; st->scan_single_xfer[2].len = 2; -- cgit v1.2.3