From 2501c1bb054290679baad0ff7f4f07c714251f4c Mon Sep 17 00:00:00 2001 From: Chris Brandt Date: Mon, 6 Mar 2017 15:20:51 -0500 Subject: i2c: riic: fix restart condition While modifying the driver to use the STOP interrupt, the completion of the intermediate transfers need to wake the driver back up in order to initiate the next transfer (restart condition). Otherwise you get never ending interrupts and only the first transfer sent. Fixes: 71ccea095ea1 ("i2c: riic: correctly finish transfers") Reported-by: Simon Horman Signed-off-by: Chris Brandt Tested-by: Simon Horman Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-riic.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/i2c/busses') diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c index 8f11d347b3ec..c811af4c8d81 100644 --- a/drivers/i2c/busses/i2c-riic.c +++ b/drivers/i2c/busses/i2c-riic.c @@ -218,8 +218,12 @@ static irqreturn_t riic_tend_isr(int irq, void *data) } if (riic->is_last || riic->err) { - riic_clear_set_bit(riic, 0, ICIER_SPIE, RIIC_ICIER); + riic_clear_set_bit(riic, ICIER_TEIE, ICIER_SPIE, RIIC_ICIER); writeb(ICCR2_SP, riic->base + RIIC_ICCR2); + } else { + /* Transfer is complete, but do not send STOP */ + riic_clear_set_bit(riic, ICIER_TEIE, 0, RIIC_ICIER); + complete(&riic->msg_done); } return IRQ_HANDLED; -- cgit v1.2.3 From 2de3ec4f1d4ba6ee380478055104eb918bd50cce Mon Sep 17 00:00:00 2001 From: Jaedon Shin Date: Fri, 3 Mar 2017 10:55:03 +0900 Subject: i2c: brcmstb: Fix START and STOP conditions The BSC data buffers to send and receive data are each of size 32 bytes or 8 bytes 'xfersz' depending on SoC. The problem observed for all the combined message transfer was if length of data transfer was a multiple of 'xfersz' a repeated START was being transmitted by BSC driver. Fixed this by appropriately setting START/STOP conditions for such transfers. Fixes: dd1aa2524bc5 ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver") Signed-off-by: Jaedon Shin Acked-by: Kamal Dasu Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-brcmstb.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-) (limited to 'drivers/i2c/busses') diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c index 0652281662a8..78792b4d6437 100644 --- a/drivers/i2c/busses/i2c-brcmstb.c +++ b/drivers/i2c/busses/i2c-brcmstb.c @@ -465,6 +465,7 @@ static int brcmstb_i2c_xfer(struct i2c_adapter *adapter, u8 *tmp_buf; int len = 0; int xfersz = brcmstb_i2c_get_xfersz(dev); + u32 cond, cond_per_msg; if (dev->is_suspended) return -EBUSY; @@ -481,10 +482,11 @@ static int brcmstb_i2c_xfer(struct i2c_adapter *adapter, pmsg->buf ? pmsg->buf[0] : '0', pmsg->len); if (i < (num - 1) && (msgs[i + 1].flags & I2C_M_NOSTART)) - brcmstb_set_i2c_start_stop(dev, ~(COND_START_STOP)); + cond = ~COND_START_STOP; else - brcmstb_set_i2c_start_stop(dev, - COND_RESTART | COND_NOSTOP); + cond = COND_RESTART | COND_NOSTOP; + + brcmstb_set_i2c_start_stop(dev, cond); /* Send slave address */ if (!(pmsg->flags & I2C_M_NOSTART)) { @@ -497,13 +499,24 @@ static int brcmstb_i2c_xfer(struct i2c_adapter *adapter, } } + cond_per_msg = cond; + /* Perform data transfer */ while (len) { bytes_to_xfer = min(len, xfersz); - if (len <= xfersz && i == (num - 1)) - brcmstb_set_i2c_start_stop(dev, - ~(COND_START_STOP)); + if (len <= xfersz) { + if (i == (num - 1)) + cond_per_msg = cond_per_msg & + ~(COND_RESTART | COND_NOSTOP); + else + cond_per_msg = cond; + } else { + cond_per_msg = (cond_per_msg & ~COND_RESTART) | + COND_NOSTOP; + } + + brcmstb_set_i2c_start_stop(dev, cond_per_msg); rc = brcmstb_i2c_xfer_bsc_data(dev, tmp_buf, bytes_to_xfer, pmsg); @@ -512,6 +525,8 @@ static int brcmstb_i2c_xfer(struct i2c_adapter *adapter, len -= bytes_to_xfer; tmp_buf += bytes_to_xfer; + + cond_per_msg = COND_NOSTART | COND_NOSTOP; } } -- cgit v1.2.3 From 1945250d979203ed326b5a44fd705b6b2c46eec5 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 27 Feb 2017 20:25:05 +0100 Subject: i2c: m65xx: drop superfluous quirk structure All length fields in Linux I2C are u16, so a HW length limitation of 16 bit lengths is not a limitation. Remove the quirk structure. Tested-by: Jun Gao Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mt65xx.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'drivers/i2c/busses') diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index 4a7d9bc2142b..45d61714c81b 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -172,14 +172,6 @@ static const struct i2c_adapter_quirks mt6577_i2c_quirks = { .max_comb_2nd_msg_len = 31, }; -static const struct i2c_adapter_quirks mt8173_i2c_quirks = { - .max_num_msgs = 65535, - .max_write_len = 65535, - .max_read_len = 65535, - .max_comb_1st_msg_len = 65535, - .max_comb_2nd_msg_len = 65535, -}; - static const struct mtk_i2c_compatible mt6577_compat = { .quirks = &mt6577_i2c_quirks, .pmic_i2c = 0, @@ -199,7 +191,6 @@ static const struct mtk_i2c_compatible mt6589_compat = { }; static const struct mtk_i2c_compatible mt8173_compat = { - .quirks = &mt8173_i2c_quirks, .pmic_i2c = 0, .dcm = 1, .auto_restart = 1, -- cgit v1.2.3 From 3b0277f198ac928f323c42e180680d2f79aa980d Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Tue, 7 Mar 2017 21:06:38 +0100 Subject: i2c: meson: fix wrong variable usage in meson_i2c_put_data Most likely a copy & paste error. Signed-off-by: Heiner Kallweit Acked-by: Jerome Brunet Signed-off-by: Wolfram Sang Fixes: 30021e3707a7 ("i2c: add support for Amlogic Meson I2C controller") --- drivers/i2c/busses/i2c-meson.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/i2c/busses') diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c index 2aa61bbbd307..73b97c71a484 100644 --- a/drivers/i2c/busses/i2c-meson.c +++ b/drivers/i2c/busses/i2c-meson.c @@ -175,7 +175,7 @@ static void meson_i2c_put_data(struct meson_i2c *i2c, char *buf, int len) wdata1 |= *buf++ << ((i - 4) * 8); writel(wdata0, i2c->regs + REG_TOK_WDATA0); - writel(wdata0, i2c->regs + REG_TOK_WDATA1); + writel(wdata1, i2c->regs + REG_TOK_WDATA1); dev_dbg(i2c->dev, "%s: data %08x %08x len %d\n", __func__, wdata0, wdata1, len); -- cgit v1.2.3 From ab809fd81fde3d416f8656d8f814a0777fb9b65e Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Tue, 27 Dec 2016 22:22:40 +0800 Subject: i2c: designware: add reset interface Some platforms like hi3660 need do reset first to allow accessing registers Signed-off-by: Zhangfei Gao Reviewed-by: Andy Shevchenko Tested-by: Ramiro Oliveira Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-core.h | 1 + drivers/i2c/busses/i2c-designware-platdrv.c | 28 ++++++++++++++++++++++++---- 2 files changed, 25 insertions(+), 4 deletions(-) (limited to 'drivers/i2c/busses') diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index c1db3a5a340f..d9aaf1790e0e 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -88,6 +88,7 @@ struct dw_i2c_dev { void __iomem *base; struct completion cmd_complete; struct clk *clk; + struct reset_control *rst; u32 (*get_clk_rate_khz) (struct dw_i2c_dev *dev); struct dw_pci_controller *controller; int cmd_err; diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 6ce431323125..79c4b4ea0539 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include #include @@ -199,6 +200,14 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) dev->irq = irq; platform_set_drvdata(pdev, dev); + dev->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL); + if (IS_ERR(dev->rst)) { + if (PTR_ERR(dev->rst) == -EPROBE_DEFER) + return -EPROBE_DEFER; + } else { + reset_control_deassert(dev->rst); + } + if (pdata) { dev->clk_freq = pdata->i2c_scl_freq; } else { @@ -235,12 +244,13 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) && dev->clk_freq != 1000000 && dev->clk_freq != 3400000) { dev_err(&pdev->dev, "Only 100kHz, 400kHz, 1MHz and 3.4MHz supported"); - return -EINVAL; + r = -EINVAL; + goto exit_reset; } r = i2c_dw_eval_lock_support(dev); if (r) - return r; + goto exit_reset; dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY; @@ -286,10 +296,18 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) } r = i2c_dw_probe(dev); - if (r && !dev->pm_runtime_disabled) - pm_runtime_disable(&pdev->dev); + if (r) + goto exit_probe; return r; + +exit_probe: + if (!dev->pm_runtime_disabled) + pm_runtime_disable(&pdev->dev); +exit_reset: + if (!IS_ERR_OR_NULL(dev->rst)) + reset_control_assert(dev->rst); + return r; } static int dw_i2c_plat_remove(struct platform_device *pdev) @@ -306,6 +324,8 @@ static int dw_i2c_plat_remove(struct platform_device *pdev) pm_runtime_put_sync(&pdev->dev); if (!dev->pm_runtime_disabled) pm_runtime_disable(&pdev->dev); + if (!IS_ERR_OR_NULL(dev->rst)) + reset_control_assert(dev->rst); return 0; } -- cgit v1.2.3 From 9ad224744218a352964f31007a1420f2420a08a0 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Thu, 9 Mar 2017 11:05:33 -0300 Subject: i2c: exynos5: Avoid transaction timeouts due TRANSFER_DONE_AUTO not set After commit 7999eecb7e56 ("i2c: exynos5: fix arbitration lost handling"), some I2C transactions are failing because the TRANSFER_DONE_AUTO field is not set in the I2C_TRANS_STATUS register so the i2c->status value is left to -EINVAL causing the i2c->msg_complete completion to never be signaled. For example, when reading the time of an I2C rtc on an Exynos5800 machine: $ cat /sys/class/rtc/rtc0/time [ 25.924594] exynos5-hsi2c 12e10000.i2c: rx timeout [ 65.028365] max77686-rtc max77802-rtc: Fail to read time reg(-22) cat: /sys/class/rtc/rtc0/time: Invalid argument The Exynos5422 manual states clearly that most I2C_TRANS_STATUS reg bits (including TRANSFER_DONE_AUTO) are cleared after the register is read. So reading has side effects and should only be done if HSI2C_INT_I2C was set. Fixes: 7999eecb7e56 ("i2c: exynos5: fix arbitration lost handling") Signed-off-by: Javier Martinez Canillas Reviewed-by: Andrzej Hajda Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-exynos5.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/i2c/busses') diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c index cbd93ce0661f..736a82472101 100644 --- a/drivers/i2c/busses/i2c-exynos5.c +++ b/drivers/i2c/busses/i2c-exynos5.c @@ -457,7 +457,6 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id) int_status = readl(i2c->regs + HSI2C_INT_STATUS); writel(int_status, i2c->regs + HSI2C_INT_STATUS); - trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS); /* handle interrupt related to the transfer status */ if (i2c->variant->hw == HSI2C_EXYNOS7) { @@ -482,11 +481,13 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id) goto stop; } + trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS); if ((trans_status & HSI2C_MASTER_ST_MASK) == HSI2C_MASTER_ST_LOSE) { i2c->state = -EAGAIN; goto stop; } } else if (int_status & HSI2C_INT_I2C) { + trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS); if (trans_status & HSI2C_NO_DEV_ACK) { dev_dbg(i2c->dev, "No ACK from device\n"); i2c->state = -ENXIO; -- cgit v1.2.3