From fb0629eeeedb6622c16da1aa76a4520daf9a46e2 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 14 Nov 2019 11:39:50 +0200 Subject: drm/panel: simple: fix osd070t1718_19ts sync drive edge The panel datasheet says that the panel samples at falling edge, but does not say anything about h/v sync signals. Testing shows that if the sync signals are driven on falling edge, the picture on the panel will be slightly shifted right. Setting sync drive edge to the same as data drive edge fixes this issue. Signed-off-by: Tomi Valkeinen Acked-by: Laurent Pinchart Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20191114093950.4101-4-tomi.valkeinen@ti.com --- drivers/gpu/drm/panel/panel-simple.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 82363d05bad4..05f1397e7ad1 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2580,7 +2580,8 @@ static const struct panel_desc osddisplays_osd070t1718_19ts = { .height = 91, }, .bus_format = MEDIA_BUS_FMT_RGB888_1X24, - .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE | + DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE, .connector_type = DRM_MODE_CONNECTOR_DPI, }; -- cgit v1.2.3