From f40f5b87d974655984ce545515e5c9e57b371b3c Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 5 Feb 2018 20:20:13 +0100 Subject: drm/panel: Add support for ARM Versatile panels The ARM reference designs "Versatile AB" and "Versatile PB" contain panel connectors with autodetection of the connected panel type. This adds a small driver utilizing the MFD syscon look-up to read the autodetection register and set up the corresponding panel appropriately. In the source file there is a bit of elaboration of the panel types and interfaces on these boards. This was tested with the PL111 DRM driver on the ARM Versatile AB with the IB2 daughterboard. Reviewed-by: Eric Anholt Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20180205192013.5349-2-linus.walleij@linaro.org --- drivers/gpu/drm/panel/Kconfig | 10 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-arm-versatile.c | 377 ++++++++++++++++++++++++++++ 3 files changed, 388 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-arm-versatile.c (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 6ba4031f3919..988048ebcc22 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -7,6 +7,16 @@ config DRM_PANEL menu "Display Panels" depends on DRM && DRM_PANEL +config DRM_PANEL_ARM_VERSATILE + tristate "ARM Versatile panel driver" + depends on OF + depends on MFD_SYSCON + select VIDEOMODE_HELPERS + help + This driver supports the ARM Versatile panels connected to ARM + reference designs. The panel is detected using special registers + in the Versatile family syscon registers. + config DRM_PANEL_LVDS tristate "Generic LVDS panel driver" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 6d251ebc568c..3d2a88d0e965 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o diff --git a/drivers/gpu/drm/panel/panel-arm-versatile.c b/drivers/gpu/drm/panel/panel-arm-versatile.c new file mode 100644 index 000000000000..3930b4925b15 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-arm-versatile.c @@ -0,0 +1,377 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Panel driver for the ARM Versatile family reference designs from + * ARM Limited. + * + * Author: + * Linus Walleij + * + * On the Versatile AB, these panels come mounted on daughterboards + * named "IB1" or "IB2" (Interface Board 1 & 2 respectively.) They + * are documented in ARM DUI 0225D Appendix C and D. These daughter + * boards support TFT display panels. + * + * - The IB1 is a passive board where the display connector defines a + * few wires for encoding the display type for autodetection, + * suitable display settings can then be looked up from this setting. + * The magic bits can be read out from the system controller. + * + * - The IB2 is a more complex board intended for GSM phone development + * with some logic and a control register, which needs to be accessed + * and the board display needs to be turned on explicitly. + * + * On the Versatile PB, a special CLCD adaptor board is available + * supporting the same displays as the Versatile AB, plus one more + * Epson QCIF display. + * + */ +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include