From aa808440426f6d163a4f51076132628fee6e1e7d Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Wed, 11 Apr 2018 22:49:12 +0200
Subject: drm/vc4: Add some missing HVS register definitions.

At least the RGBA expand field we should have been setting, because we
aren't expanding correctly for 565 -> 8888.  Other registers are ones
that may be interesting for various projects that have been discussed.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Schake <stschake@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523479755-20812-2-git-send-email-stschake@gmail.com
---
 drivers/gpu/drm/vc4/vc4_regs.h | 96 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 96 insertions(+)

(limited to 'drivers/gpu/drm/vc4')

diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index a141496104a6..4af3e29d076a 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -330,6 +330,21 @@
 #define SCALER_DISPCTRL0                        0x00000040
 # define SCALER_DISPCTRLX_ENABLE		BIT(31)
 # define SCALER_DISPCTRLX_RESET			BIT(30)
+/* Generates a single frame when VSTART is seen and stops at the last
+ * pixel read from the FIFO.
+ */
+# define SCALER_DISPCTRLX_ONESHOT		BIT(29)
+/* Processes a single context in the dlist and then task switch,
+ * instead of an entire line.
+ */
+# define SCALER_DISPCTRLX_ONECTX		BIT(28)
+/* Set to have DISPSLAVE return 2 16bpp pixels and no status data. */
+# define SCALER_DISPCTRLX_FIFO32		BIT(27)
+/* Turns on output to the DISPSLAVE register instead of the normal
+ * FIFO.
+ */
+# define SCALER_DISPCTRLX_FIFOREG		BIT(26)
+
 # define SCALER_DISPCTRLX_WIDTH_MASK		VC4_MASK(23, 12)
 # define SCALER_DISPCTRLX_WIDTH_SHIFT		12
 # define SCALER_DISPCTRLX_HEIGHT_MASK		VC4_MASK(11, 0)
@@ -402,6 +417,68 @@
  */
 # define SCALER_GAMADDR_SRAMENB			BIT(30)
 
+#define SCALER_OLEDOFFS                         0x00000080
+/* Clamps R to [16,235] and G/B to [16,240]. */
+# define SCALER_OLEDOFFS_YUVCLAMP               BIT(31)
+
+/* Chooses which display FIFO the matrix applies to. */
+# define SCALER_OLEDOFFS_DISPFIFO_MASK          VC4_MASK(25, 24)
+# define SCALER_OLEDOFFS_DISPFIFO_SHIFT         24
+# define SCALER_OLEDOFFS_DISPFIFO_DISABLED      0
+# define SCALER_OLEDOFFS_DISPFIFO_0             1
+# define SCALER_OLEDOFFS_DISPFIFO_1             2
+# define SCALER_OLEDOFFS_DISPFIFO_2             3
+
+/* Offsets are 8-bit 2s-complement. */
+# define SCALER_OLEDOFFS_RED_MASK               VC4_MASK(23, 16)
+# define SCALER_OLEDOFFS_RED_SHIFT              16
+# define SCALER_OLEDOFFS_GREEN_MASK             VC4_MASK(15, 8)
+# define SCALER_OLEDOFFS_GREEN_SHIFT            8
+# define SCALER_OLEDOFFS_BLUE_MASK              VC4_MASK(7, 0)
+# define SCALER_OLEDOFFS_BLUE_SHIFT             0
+
+/* The coefficients are S0.9 fractions. */
+#define SCALER_OLEDCOEF0                        0x00000084
+# define SCALER_OLEDCOEF0_B_TO_R_MASK           VC4_MASK(29, 20)
+# define SCALER_OLEDCOEF0_B_TO_R_SHIFT          20
+# define SCALER_OLEDCOEF0_B_TO_G_MASK           VC4_MASK(19, 10)
+# define SCALER_OLEDCOEF0_B_TO_G_SHIFT          10
+# define SCALER_OLEDCOEF0_B_TO_B_MASK           VC4_MASK(9, 0)
+# define SCALER_OLEDCOEF0_B_TO_B_SHIFT          0
+
+#define SCALER_OLEDCOEF1                        0x00000088
+# define SCALER_OLEDCOEF1_G_TO_R_MASK           VC4_MASK(29, 20)
+# define SCALER_OLEDCOEF1_G_TO_R_SHIFT          20
+# define SCALER_OLEDCOEF1_G_TO_G_MASK           VC4_MASK(19, 10)
+# define SCALER_OLEDCOEF1_G_TO_G_SHIFT          10
+# define SCALER_OLEDCOEF1_G_TO_B_MASK           VC4_MASK(9, 0)
+# define SCALER_OLEDCOEF1_G_TO_B_SHIFT          0
+
+#define SCALER_OLEDCOEF2                        0x0000008c
+# define SCALER_OLEDCOEF2_R_TO_R_MASK           VC4_MASK(29, 20)
+# define SCALER_OLEDCOEF2_R_TO_R_SHIFT          20
+# define SCALER_OLEDCOEF2_R_TO_G_MASK           VC4_MASK(19, 10)
+# define SCALER_OLEDCOEF2_R_TO_G_SHIFT          10
+# define SCALER_OLEDCOEF2_R_TO_B_MASK           VC4_MASK(9, 0)
+# define SCALER_OLEDCOEF2_R_TO_B_SHIFT          0
+
+/* Slave addresses for DMAing from HVS composition output to other
+ * devices.  The top bits are valid only in !FIFO32 mode.
+ */
+#define SCALER_DISPSLAVE0                       0x000000c0
+#define SCALER_DISPSLAVE1                       0x000000c9
+#define SCALER_DISPSLAVE2                       0x000000d0
+# define SCALER_DISPSLAVE_ISSUE_VSTART          BIT(31)
+# define SCALER_DISPSLAVE_ISSUE_HSTART          BIT(30)
+/* Set when the current line has been read and an HSTART is required. */
+# define SCALER_DISPSLAVE_EOL                   BIT(26)
+/* Set when the display FIFO is empty. */
+# define SCALER_DISPSLAVE_EMPTY                 BIT(25)
+/* Set when there is RGB data ready to read. */
+# define SCALER_DISPSLAVE_VALID                 BIT(24)
+# define SCALER_DISPSLAVE_RGB_MASK              VC4_MASK(23, 0)
+# define SCALER_DISPSLAVE_RGB_SHIFT             0
+
 #define SCALER_GAMDATA                          0x000000e0
 #define SCALER_DLIST_START                      0x00002000
 #define SCALER_DLIST_SIZE                       0x00004000
@@ -767,6 +844,10 @@ enum hvs_pixel_format {
 	HVS_PIXEL_FORMAT_YCBCR_YUV420_2PLANE = 9,
 	HVS_PIXEL_FORMAT_YCBCR_YUV422_3PLANE = 10,
 	HVS_PIXEL_FORMAT_YCBCR_YUV422_2PLANE = 11,
+	HVS_PIXEL_FORMAT_H264 = 12,
+	HVS_PIXEL_FORMAT_PALETTE = 13,
+	HVS_PIXEL_FORMAT_YUV444_RGB = 14,
+	HVS_PIXEL_FORMAT_AYUV444_RGB = 15,
 };
 
 /* Note: the LSB is the rightmost character shown.  Only valid for
@@ -800,12 +881,27 @@ enum hvs_pixel_format {
 #define SCALER_CTL0_TILING_128B			2
 #define SCALER_CTL0_TILING_256B_OR_T		3
 
+#define SCALER_CTL0_ALPHA_MASK                  BIT(19)
 #define SCALER_CTL0_HFLIP                       BIT(16)
 #define SCALER_CTL0_VFLIP                       BIT(15)
 
+#define SCALER_CTL0_KEY_MODE_MASK		VC4_MASK(18, 17)
+#define SCALER_CTL0_KEY_MODE_SHIFT		17
+#define SCALER_CTL0_KEY_DISABLED		0
+#define SCALER_CTL0_KEY_LUMA_OR_COMMON_RGB	1
+#define SCALER_CTL0_KEY_MATCH			2 /* turn transparent */
+#define SCALER_CTL0_KEY_REPLACE			3 /* replace with value from key mask word 2 */
+
 #define SCALER_CTL0_ORDER_MASK			VC4_MASK(14, 13)
 #define SCALER_CTL0_ORDER_SHIFT			13
 
+#define SCALER_CTL0_RGBA_EXPAND_MASK		VC4_MASK(12, 11)
+#define SCALER_CTL0_RGBA_EXPAND_SHIFT		11
+#define SCALER_CTL0_RGBA_EXPAND_ZERO		0
+#define SCALER_CTL0_RGBA_EXPAND_LSB		1
+#define SCALER_CTL0_RGBA_EXPAND_MSB		2
+#define SCALER_CTL0_RGBA_EXPAND_ROUND		3
+
 #define SCALER_CTL0_SCL1_MASK			VC4_MASK(10, 8)
 #define SCALER_CTL0_SCL1_SHIFT			8
 
-- 
cgit v1.2.3


From 640e0c79de8b0a68b5a23c9cd46da3518cbff7d3 Mon Sep 17 00:00:00 2001
From: Stefan Schake <stschake@gmail.com>
Date: Wed, 11 Apr 2018 22:49:13 +0200
Subject: drm/vc4: Expose gamma as atomic property

We are an atomic driver so the gamma LUT should also be exposed as a
CRTC property through the DRM atomic color management. This will also
take care of the legacy path for us.

Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1523479755-20812-3-git-send-email-stschake@gmail.com
---
 drivers/gpu/drm/vc4/vc4_crtc.c | 37 ++++++++++++++++++++++++++-----------
 1 file changed, 26 insertions(+), 11 deletions(-)

(limited to 'drivers/gpu/drm/vc4')

diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index bf4667481935..285f88dd9a82 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -298,23 +298,21 @@ vc4_crtc_lut_load(struct drm_crtc *crtc)
 		HVS_WRITE(SCALER_GAMDATA, vc4_crtc->lut_b[i]);
 }
 
-static int
-vc4_crtc_gamma_set(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
-		   uint32_t size,
-		   struct drm_modeset_acquire_ctx *ctx)
+static void
+vc4_crtc_update_gamma_lut(struct drm_crtc *crtc)
 {
 	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+	struct drm_color_lut *lut = crtc->state->gamma_lut->data;
+	u32 length = drm_color_lut_size(crtc->state->gamma_lut);
 	u32 i;
 
-	for (i = 0; i < size; i++) {
-		vc4_crtc->lut_r[i] = r[i] >> 8;
-		vc4_crtc->lut_g[i] = g[i] >> 8;
-		vc4_crtc->lut_b[i] = b[i] >> 8;
+	for (i = 0; i < length; i++) {
+		vc4_crtc->lut_r[i] = drm_color_lut_extract(lut[i].red, 8);
+		vc4_crtc->lut_g[i] = drm_color_lut_extract(lut[i].green, 8);
+		vc4_crtc->lut_b[i] = drm_color_lut_extract(lut[i].blue, 8);
 	}
 
 	vc4_crtc_lut_load(crtc);
-
-	return 0;
 }
 
 static u32 vc4_get_fifo_full_level(u32 format)
@@ -699,6 +697,22 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
 	if (crtc->state->active && old_state->active)
 		vc4_crtc_update_dlist(crtc);
 
+	if (crtc->state->color_mgmt_changed) {
+		u32 dispbkgndx = HVS_READ(SCALER_DISPBKGNDX(vc4_crtc->channel));
+
+		if (crtc->state->gamma_lut) {
+			vc4_crtc_update_gamma_lut(crtc);
+			dispbkgndx |= SCALER_DISPBKGND_GAMMA;
+		} else {
+			/* Unsetting DISPBKGND_GAMMA skips the gamma lut step
+			 * in hardware, which is the same as a linear lut that
+			 * DRM expects us to use in absence of a user lut.
+			 */
+			dispbkgndx &= ~SCALER_DISPBKGND_GAMMA;
+		}
+		HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel), dispbkgndx);
+	}
+
 	if (debug_dump_regs) {
 		DRM_INFO("CRTC %d HVS after:\n", drm_crtc_index(crtc));
 		vc4_hvs_dump_state(dev);
@@ -909,7 +923,7 @@ static const struct drm_crtc_funcs vc4_crtc_funcs = {
 	.reset = vc4_crtc_reset,
 	.atomic_duplicate_state = vc4_crtc_duplicate_state,
 	.atomic_destroy_state = vc4_crtc_destroy_state,
-	.gamma_set = vc4_crtc_gamma_set,
+	.gamma_set = drm_atomic_helper_legacy_gamma_set,
 	.enable_vblank = vc4_enable_vblank,
 	.disable_vblank = vc4_disable_vblank,
 };
@@ -1035,6 +1049,7 @@ static int vc4_crtc_bind(struct device *dev, struct device *master, void *data)
 	primary_plane->crtc = crtc;
 	vc4_crtc->channel = vc4_crtc->data->hvs_channel;
 	drm_mode_crtc_set_gamma_size(crtc, ARRAY_SIZE(vc4_crtc->lut_r));
+	drm_crtc_enable_color_mgmt(crtc, 0, false, crtc->gamma_size);
 
 	/* Set up some arbitrary number of planes.  We're not limited
 	 * by a set number of physical registers, just the space in
-- 
cgit v1.2.3


From 792718070621f6137a833fcc4a9fde77f9b6a4c5 Mon Sep 17 00:00:00 2001
From: Stefan Schake <stschake@gmail.com>
Date: Wed, 11 Apr 2018 22:49:14 +0200
Subject: drm/vc4: Move CRTC state to header

We need to access the channel for configuring our CTM hardware.

Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1523479755-20812-4-git-send-email-stschake@gmail.com
---
 drivers/gpu/drm/vc4/vc4_crtc.c | 33 ---------------------------------
 drivers/gpu/drm/vc4/vc4_drv.h  | 33 +++++++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+), 33 deletions(-)

(limited to 'drivers/gpu/drm/vc4')

diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 285f88dd9a82..08fe8dd7d8df 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -42,51 +42,18 @@
 #include "vc4_drv.h"
 #include "vc4_regs.h"
 
-struct vc4_crtc {
-	struct drm_crtc base;
-	const struct vc4_crtc_data *data;
-	void __iomem *regs;
-
-	/* Timestamp at start of vblank irq - unaffected by lock delays. */
-	ktime_t t_vblank;
-
-	/* Which HVS channel we're using for our CRTC. */
-	int channel;
-
-	u8 lut_r[256];
-	u8 lut_g[256];
-	u8 lut_b[256];
-	/* Size in pixels of the COB memory allocated to this CRTC. */
-	u32 cob_size;
-
-	struct drm_pending_vblank_event *event;
-};
-
 struct vc4_crtc_state {
 	struct drm_crtc_state base;
 	/* Dlist area for this CRTC configuration. */
 	struct drm_mm_node mm;
 };
 
-static inline struct vc4_crtc *
-to_vc4_crtc(struct drm_crtc *crtc)
-{
-	return (struct vc4_crtc *)crtc;
-}
-
 static inline struct vc4_crtc_state *
 to_vc4_crtc_state(struct drm_crtc_state *crtc_state)
 {
 	return (struct vc4_crtc_state *)crtc_state;
 }
 
-struct vc4_crtc_data {
-	/* Which channel of the HVS this pixelvalve sources from. */
-	int hvs_channel;
-
-	enum vc4_encoder_type encoder_types[4];
-};
-
 #define CRTC_WRITE(offset, val) writel(val, vc4_crtc->regs + (offset))
 #define CRTC_READ(offset) readl(vc4_crtc->regs + (offset))
 
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index 1b4cd1fabf56..4288615b66a2 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -392,6 +392,39 @@ to_vc4_encoder(struct drm_encoder *encoder)
 	return container_of(encoder, struct vc4_encoder, base);
 }
 
+struct vc4_crtc_data {
+	/* Which channel of the HVS this pixelvalve sources from. */
+	int hvs_channel;
+
+	enum vc4_encoder_type encoder_types[4];
+};
+
+struct vc4_crtc {
+	struct drm_crtc base;
+	const struct vc4_crtc_data *data;
+	void __iomem *regs;
+
+	/* Timestamp at start of vblank irq - unaffected by lock delays. */
+	ktime_t t_vblank;
+
+	/* Which HVS channel we're using for our CRTC. */
+	int channel;
+
+	u8 lut_r[256];
+	u8 lut_g[256];
+	u8 lut_b[256];
+	/* Size in pixels of the COB memory allocated to this CRTC. */
+	u32 cob_size;
+
+	struct drm_pending_vblank_event *event;
+};
+
+static inline struct vc4_crtc *
+to_vc4_crtc(struct drm_crtc *crtc)
+{
+	return (struct vc4_crtc *)crtc;
+}
+
 #define V3D_READ(offset) readl(vc4->v3d->regs + offset)
 #define V3D_WRITE(offset, val) writel(val, vc4->v3d->regs + offset)
 #define HVS_READ(offset) readl(vc4->hvs->regs + offset)
-- 
cgit v1.2.3


From 539c320bfa9778ef4a96ee4c846d230f80ca6f50 Mon Sep 17 00:00:00 2001
From: Gustavo Padovan <gustavo.padovan@collabora.com>
Date: Fri, 30 Mar 2018 10:54:45 +0200
Subject: drm/vc4: update cursors asynchronously through atomic
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Add support for async updates of cursors by using the new atomic
interface for that. Basically what this commit does is do what
vc4_update_plane() did but through atomic.

v7: Place the drm_atomic_set_fb_for_plane() call after the new
    FB has been applied to the HW to avoid possible use-after-free
    issues
v6: add missing drm_atomic_set_fb_for_plane() in
    vc4_plane_atomic_async_update() (Boris Brezillon)
v5: add missing call to vc4_plane_atomic_check() (Eric Anholt)
v4: add drm_atomic_helper_async() commit (Eric Anholt)
v3: move size checks back to drivers (Ville Syrjälä)
v2: move fb setting to core and use new state (Eric Anholt)

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180330085445.31726-1-boris.brezillon@bootlin.com
---
 drivers/gpu/drm/vc4/vc4_kms.c   |  20 ++++++
 drivers/gpu/drm/vc4/vc4_plane.c | 131 +++++++++++++++++-----------------------
 2 files changed, 74 insertions(+), 77 deletions(-)

(limited to 'drivers/gpu/drm/vc4')

diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c
index ba60153dddb5..e791e498a3dd 100644
--- a/drivers/gpu/drm/vc4/vc4_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_kms.c
@@ -90,6 +90,26 @@ static int vc4_atomic_commit(struct drm_device *dev,
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	int ret;
 
+	if (state->async_update) {
+		ret = down_interruptible(&vc4->async_modeset);
+		if (ret)
+			return ret;
+
+		ret = drm_atomic_helper_prepare_planes(dev, state);
+		if (ret) {
+			up(&vc4->async_modeset);
+			return ret;
+		}
+
+		drm_atomic_helper_async_commit(dev, state);
+
+		drm_atomic_helper_cleanup_planes(dev, state);
+
+		up(&vc4->async_modeset);
+
+		return 0;
+	}
+
 	ret = drm_atomic_helper_setup_commit(state, nonblock);
 	if (ret)
 		return ret;
diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index ce39390be389..c3a37a99e601 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -741,6 +741,57 @@ void vc4_plane_async_set_fb(struct drm_plane *plane, struct drm_framebuffer *fb)
 	vc4_state->dlist[vc4_state->ptr0_offset] = addr;
 }
 
+static void vc4_plane_atomic_async_update(struct drm_plane *plane,
+					  struct drm_plane_state *state)
+{
+	struct vc4_plane_state *vc4_state = to_vc4_plane_state(plane->state);
+
+	if (plane->state->fb != state->fb) {
+		vc4_plane_async_set_fb(plane, state->fb);
+		drm_atomic_set_fb_for_plane(plane->state, state->fb);
+	}
+
+	/* Set the cursor's position on the screen.  This is the
+	 * expected change from the drm_mode_cursor_universal()
+	 * helper.
+	 */
+	plane->state->crtc_x = state->crtc_x;
+	plane->state->crtc_y = state->crtc_y;
+
+	/* Allow changing the start position within the cursor BO, if
+	 * that matters.
+	 */
+	plane->state->src_x = state->src_x;
+	plane->state->src_y = state->src_y;
+
+	/* Update the display list based on the new crtc_x/y. */
+	vc4_plane_atomic_check(plane, plane->state);
+
+	/* Note that we can't just call vc4_plane_write_dlist()
+	 * because that would smash the context data that the HVS is
+	 * currently using.
+	 */
+	writel(vc4_state->dlist[vc4_state->pos0_offset],
+	       &vc4_state->hw_dlist[vc4_state->pos0_offset]);
+	writel(vc4_state->dlist[vc4_state->pos2_offset],
+	       &vc4_state->hw_dlist[vc4_state->pos2_offset]);
+	writel(vc4_state->dlist[vc4_state->ptr0_offset],
+	       &vc4_state->hw_dlist[vc4_state->ptr0_offset]);
+}
+
+static int vc4_plane_atomic_async_check(struct drm_plane *plane,
+					struct drm_plane_state *state)
+{
+	/* No configuring new scaling in the fast path. */
+	if (plane->state->crtc_w != state->crtc_w ||
+	    plane->state->crtc_h != state->crtc_h ||
+	    plane->state->src_w != state->src_w ||
+	    plane->state->src_h != state->src_h)
+		return -EINVAL;
+
+	return 0;
+}
+
 static int vc4_prepare_fb(struct drm_plane *plane,
 			  struct drm_plane_state *state)
 {
@@ -780,6 +831,8 @@ static const struct drm_plane_helper_funcs vc4_plane_helper_funcs = {
 	.atomic_update = vc4_plane_atomic_update,
 	.prepare_fb = vc4_prepare_fb,
 	.cleanup_fb = vc4_cleanup_fb,
+	.atomic_async_check = vc4_plane_atomic_async_check,
+	.atomic_async_update = vc4_plane_atomic_async_update,
 };
 
 static void vc4_plane_destroy(struct drm_plane *plane)
@@ -788,82 +841,6 @@ static void vc4_plane_destroy(struct drm_plane *plane)
 	drm_plane_cleanup(plane);
 }
 
-/* Implements immediate (non-vblank-synced) updates of the cursor
- * position, or falls back to the atomic helper otherwise.
- */
-static int
-vc4_update_plane(struct drm_plane *plane,
-		 struct drm_crtc *crtc,
-		 struct drm_framebuffer *fb,
-		 int crtc_x, int crtc_y,
-		 unsigned int crtc_w, unsigned int crtc_h,
-		 uint32_t src_x, uint32_t src_y,
-		 uint32_t src_w, uint32_t src_h,
-		 struct drm_modeset_acquire_ctx *ctx)
-{
-	struct drm_plane_state *plane_state;
-	struct vc4_plane_state *vc4_state;
-
-	if (plane != crtc->cursor)
-		goto out;
-
-	plane_state = plane->state;
-	vc4_state = to_vc4_plane_state(plane_state);
-
-	if (!plane_state)
-		goto out;
-
-	/* No configuring new scaling in the fast path. */
-	if (crtc_w != plane_state->crtc_w ||
-	    crtc_h != plane_state->crtc_h ||
-	    src_w != plane_state->src_w ||
-	    src_h != plane_state->src_h) {
-		goto out;
-	}
-
-	if (fb != plane_state->fb) {
-		drm_atomic_set_fb_for_plane(plane->state, fb);
-		vc4_plane_async_set_fb(plane, fb);
-	}
-
-	/* Set the cursor's position on the screen.  This is the
-	 * expected change from the drm_mode_cursor_universal()
-	 * helper.
-	 */
-	plane_state->crtc_x = crtc_x;
-	plane_state->crtc_y = crtc_y;
-
-	/* Allow changing the start position within the cursor BO, if
-	 * that matters.
-	 */
-	plane_state->src_x = src_x;
-	plane_state->src_y = src_y;
-
-	/* Update the display list based on the new crtc_x/y. */
-	vc4_plane_atomic_check(plane, plane_state);
-
-	/* Note that we can't just call vc4_plane_write_dlist()
-	 * because that would smash the context data that the HVS is
-	 * currently using.
-	 */
-	writel(vc4_state->dlist[vc4_state->pos0_offset],
-	       &vc4_state->hw_dlist[vc4_state->pos0_offset]);
-	writel(vc4_state->dlist[vc4_state->pos2_offset],
-	       &vc4_state->hw_dlist[vc4_state->pos2_offset]);
-	writel(vc4_state->dlist[vc4_state->ptr0_offset],
-	       &vc4_state->hw_dlist[vc4_state->ptr0_offset]);
-
-	return 0;
-
-out:
-	return drm_atomic_helper_update_plane(plane, crtc, fb,
-					      crtc_x, crtc_y,
-					      crtc_w, crtc_h,
-					      src_x, src_y,
-					      src_w, src_h,
-					      ctx);
-}
-
 static bool vc4_format_mod_supported(struct drm_plane *plane,
 				     uint32_t format,
 				     uint64_t modifier)
@@ -891,7 +868,7 @@ static bool vc4_format_mod_supported(struct drm_plane *plane,
 }
 
 static const struct drm_plane_funcs vc4_plane_funcs = {
-	.update_plane = vc4_update_plane,
+	.update_plane = drm_atomic_helper_update_plane,
 	.disable_plane = drm_atomic_helper_disable_plane,
 	.destroy = vc4_plane_destroy,
 	.set_property = NULL,
-- 
cgit v1.2.3


From 9f900de31dcc14b3c5765a383ef52b9efba7f542 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
Date: Thu, 19 Apr 2018 16:05:46 +0200
Subject: gpu: drm: vc4: simplify getting .drvdata

We should get drvdata from struct device directly. Going via
platform_device is an unneeded step back and forth.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180419140641.27926-17-wsa+renesas@sang-engineering.com
---
 drivers/gpu/drm/vc4/vc4_drv.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/gpu/drm/vc4')

diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c
index 94b99c90425a..af9515ae0e0a 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.c
+++ b/drivers/gpu/drm/vc4/vc4_drv.c
@@ -318,8 +318,7 @@ dev_unref:
 
 static void vc4_drm_unbind(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct drm_device *drm = platform_get_drvdata(pdev);
+	struct drm_device *drm = dev_get_drvdata(dev);
 
 	drm_dev_unregister(drm);
 
-- 
cgit v1.2.3


From 22445f0316a253406472ddcda98c3341b1eebaf4 Mon Sep 17 00:00:00 2001
From: Stefan Schake <stschake@gmail.com>
Date: Fri, 20 Apr 2018 17:09:54 -0700
Subject: drm/vc4: Add support for plane alpha

The HVS supports mixing fixed alpha with per-pixel alpha or
setting a fixed plane alpha in case there is no per-pixel information.
This allows us to support the generic DRM plane alpha property.

Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180421000954.18936-1-stschake@gmail.com
---
 drivers/gpu/drm/vc4/vc4_plane.c | 21 +++++++++++++++++----
 drivers/gpu/drm/vc4/vc4_regs.h  |  1 +
 2 files changed, 18 insertions(+), 4 deletions(-)

(limited to 'drivers/gpu/drm/vc4')

diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index c3a37a99e601..3483c05cc3d6 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -201,6 +201,7 @@ static void vc4_plane_reset(struct drm_plane *plane)
 		return;
 
 	plane->state = &vc4_state->base;
+	plane->state->alpha = DRM_BLEND_ALPHA_OPAQUE;
 	vc4_state->base.plane = plane;
 }
 
@@ -467,6 +468,7 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
 	u32 ctl0_offset = vc4_state->dlist_count;
 	const struct hvs_format *format = vc4_get_hvs_format(fb->format->format);
 	int num_planes = drm_format_num_planes(format->drm);
+	bool mix_plane_alpha;
 	bool covers_screen;
 	u32 scl0, scl1, pitch0;
 	u32 lbm_size, tiling;
@@ -552,7 +554,7 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
 	/* Position Word 0: Image Positions and Alpha Value */
 	vc4_state->pos0_offset = vc4_state->dlist_count;
 	vc4_dlist_write(vc4_state,
-			VC4_SET_FIELD(0xff, SCALER_POS0_FIXED_ALPHA) |
+			VC4_SET_FIELD(state->alpha >> 8, SCALER_POS0_FIXED_ALPHA) |
 			VC4_SET_FIELD(vc4_state->crtc_x, SCALER_POS0_START_X) |
 			VC4_SET_FIELD(vc4_state->crtc_y, SCALER_POS0_START_Y));
 
@@ -565,6 +567,13 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
 					      SCALER_POS1_SCL_HEIGHT));
 	}
 
+	/* Don't waste cycles mixing with plane alpha if the set alpha
+	 * is opaque or there is no per-pixel alpha information.
+	 * In any case we use the alpha property value as the fixed alpha.
+	 */
+	mix_plane_alpha = state->alpha != DRM_BLEND_ALPHA_OPAQUE &&
+			  fb->format->has_alpha;
+
 	/* Position Word 2: Source Image Size, Alpha */
 	vc4_state->pos2_offset = vc4_state->dlist_count;
 	vc4_dlist_write(vc4_state,
@@ -572,6 +581,7 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
 				      SCALER_POS2_ALPHA_MODE_PIPELINE :
 				      SCALER_POS2_ALPHA_MODE_FIXED,
 				      SCALER_POS2_ALPHA_MODE) |
+			(mix_plane_alpha ? SCALER_POS2_ALPHA_MIX : 0) |
 			(fb->format->has_alpha ? SCALER_POS2_ALPHA_PREMULT : 0) |
 			VC4_SET_FIELD(vc4_state->src_w[0], SCALER_POS2_WIDTH) |
 			VC4_SET_FIELD(vc4_state->src_h[0], SCALER_POS2_HEIGHT));
@@ -653,10 +663,11 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
 			vc4_state->crtc_w == state->crtc->mode.hdisplay &&
 			vc4_state->crtc_h == state->crtc->mode.vdisplay;
 	/* Background fill might be necessary when the plane has per-pixel
-	 * alpha content and blends from the background or does not cover
-	 * the entire screen.
+	 * alpha content or a non-opaque plane alpha and could blend from the
+	 * background or does not cover the entire screen.
 	 */
-	vc4_state->needs_bg_fill = fb->format->has_alpha || !covers_screen;
+	vc4_state->needs_bg_fill = fb->format->has_alpha || !covers_screen ||
+				   state->alpha != DRM_BLEND_ALPHA_OPAQUE;
 
 	return 0;
 }
@@ -916,5 +927,7 @@ struct drm_plane *vc4_plane_init(struct drm_device *dev,
 
 	drm_plane_helper_add(plane, &vc4_plane_helper_funcs);
 
+	drm_plane_create_alpha_property(plane);
+
 	return plane;
 }
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 4af3e29d076a..d1fb6fec46eb 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -945,6 +945,7 @@ enum hvs_pixel_format {
 #define SCALER_POS2_ALPHA_MODE_FIXED_NONZERO	2
 #define SCALER_POS2_ALPHA_MODE_FIXED_OVER_0x07	3
 #define SCALER_POS2_ALPHA_PREMULT		BIT(29)
+#define SCALER_POS2_ALPHA_MIX			BIT(28)
 
 #define SCALER_POS2_HEIGHT_MASK			VC4_MASK(27, 16)
 #define SCALER_POS2_HEIGHT_SHIFT		16
-- 
cgit v1.2.3


From 766cc6b1f7fc9e10f096a84d147e48dead18ba59 Mon Sep 17 00:00:00 2001
From: Stefan Schake <stschake@gmail.com>
Date: Fri, 20 Apr 2018 05:25:44 -0700
Subject: drm/vc4: Add CTM support

The hardware has a single block for applying a CTM prior to gamma lut.
It can be fed with pixels from one of our CRTC at a time and uses a
matrix with S0.9 scalars. Use private atomic state to reject attempts
from userland to apply CTM for more than one CRTC at a time and reject
matrices with scalars that we can't approximate without integer bits.

Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/218067/
---
 drivers/gpu/drm/vc4/vc4_crtc.c |   5 +
 drivers/gpu/drm/vc4/vc4_drv.c  |   3 +
 drivers/gpu/drm/vc4/vc4_drv.h  |   4 +
 drivers/gpu/drm/vc4/vc4_kms.c  | 204 ++++++++++++++++++++++++++++++++++++++++-
 4 files changed, 215 insertions(+), 1 deletion(-)

(limited to 'drivers/gpu/drm/vc4')

diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 08fe8dd7d8df..83d3b7912fc2 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -1018,6 +1018,11 @@ static int vc4_crtc_bind(struct device *dev, struct device *master, void *data)
 	drm_mode_crtc_set_gamma_size(crtc, ARRAY_SIZE(vc4_crtc->lut_r));
 	drm_crtc_enable_color_mgmt(crtc, 0, false, crtc->gamma_size);
 
+	/* We support CTM, but only for one CRTC at a time. It's therefore
+	 * implemented as private driver state in vc4_kms, not here.
+	 */
+	drm_crtc_enable_color_mgmt(crtc, 0, true, crtc->gamma_size);
+
 	/* Set up some arbitrary number of planes.  We're not limited
 	 * by a set number of physical registers, just the space in
 	 * the HVS (16k) and how small an plane can be (28 bytes).
diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c
index af9515ae0e0a..40ddeaafd65f 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.c
+++ b/drivers/gpu/drm/vc4/vc4_drv.c
@@ -319,6 +319,7 @@ dev_unref:
 static void vc4_drm_unbind(struct device *dev)
 {
 	struct drm_device *drm = dev_get_drvdata(dev);
+	struct vc4_dev *vc4 = to_vc4_dev(drm);
 
 	drm_dev_unregister(drm);
 
@@ -326,6 +327,8 @@ static void vc4_drm_unbind(struct device *dev)
 
 	drm_mode_config_cleanup(drm);
 
+	drm_atomic_private_obj_fini(&vc4->ctm_manager);
+
 	drm_dev_unref(drm);
 }
 
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index 4288615b66a2..22589d39083c 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -10,6 +10,7 @@
 #include <drm/drmP.h>
 #include <drm/drm_encoder.h>
 #include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_atomic.h>
 
 #include "uapi/drm/vc4_drm.h"
 
@@ -193,6 +194,9 @@ struct vc4_dev {
 	} hangcheck;
 
 	struct semaphore async_modeset;
+
+	struct drm_modeset_lock ctm_state_lock;
+	struct drm_private_obj ctm_manager;
 };
 
 static inline struct vc4_dev *
diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c
index e791e498a3dd..8a411e5f8776 100644
--- a/drivers/gpu/drm/vc4/vc4_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_kms.c
@@ -23,6 +23,117 @@
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
 #include "vc4_drv.h"
+#include "vc4_regs.h"
+
+struct vc4_ctm_state {
+	struct drm_private_state base;
+	struct drm_color_ctm *ctm;
+	int fifo;
+};
+
+static struct vc4_ctm_state *to_vc4_ctm_state(struct drm_private_state *priv)
+{
+	return container_of(priv, struct vc4_ctm_state, base);
+}
+
+static struct vc4_ctm_state *vc4_get_ctm_state(struct drm_atomic_state *state,
+					       struct drm_private_obj *manager)
+{
+	struct drm_device *dev = state->dev;
+	struct vc4_dev *vc4 = dev->dev_private;
+	struct drm_private_state *priv_state;
+	int ret;
+
+	ret = drm_modeset_lock(&vc4->ctm_state_lock, state->acquire_ctx);
+	if (ret)
+		return ERR_PTR(ret);
+
+	priv_state = drm_atomic_get_private_obj_state(state, manager);
+	if (IS_ERR(priv_state))
+		return ERR_CAST(priv_state);
+
+	return to_vc4_ctm_state(priv_state);
+}
+
+static struct drm_private_state *
+vc4_ctm_duplicate_state(struct drm_private_obj *obj)
+{
+	struct vc4_ctm_state *state;
+
+	state = kmemdup(obj->state, sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return NULL;
+
+	__drm_atomic_helper_private_obj_duplicate_state(obj, &state->base);
+
+	return &state->base;
+}
+
+static void vc4_ctm_destroy_state(struct drm_private_obj *obj,
+				  struct drm_private_state *state)
+{
+	struct vc4_ctm_state *ctm_state = to_vc4_ctm_state(state);
+
+	kfree(ctm_state);
+}
+
+static const struct drm_private_state_funcs vc4_ctm_state_funcs = {
+	.atomic_duplicate_state = vc4_ctm_duplicate_state,
+	.atomic_destroy_state = vc4_ctm_destroy_state,
+};
+
+/* Converts a DRM S31.32 value to the HW S0.9 format. */
+static u16 vc4_ctm_s31_32_to_s0_9(u64 in)
+{
+	u16 r;
+
+	/* Sign bit. */
+	r = in & BIT_ULL(63) ? BIT(9) : 0;
+
+	if ((in & GENMASK_ULL(62, 32)) > 0) {
+		/* We have zero integer bits so we can only saturate here. */
+		r |= GENMASK(8, 0);
+	} else {
+		/* Otherwise take the 9 most important fractional bits. */
+		r |= (in >> 23) & GENMASK(8, 0);
+	}
+
+	return r;
+}
+
+static void
+vc4_ctm_commit(struct vc4_dev *vc4, struct drm_atomic_state *state)
+{
+	struct vc4_ctm_state *ctm_state = to_vc4_ctm_state(vc4->ctm_manager.state);
+	struct drm_color_ctm *ctm = ctm_state->ctm;
+
+	if (ctm_state->fifo) {
+		HVS_WRITE(SCALER_OLEDCOEF2,
+			  VC4_SET_FIELD(vc4_ctm_s31_32_to_s0_9(ctm->matrix[0]),
+					SCALER_OLEDCOEF2_R_TO_R) |
+			  VC4_SET_FIELD(vc4_ctm_s31_32_to_s0_9(ctm->matrix[3]),
+					SCALER_OLEDCOEF2_R_TO_G) |
+			  VC4_SET_FIELD(vc4_ctm_s31_32_to_s0_9(ctm->matrix[6]),
+					SCALER_OLEDCOEF2_R_TO_B));
+		HVS_WRITE(SCALER_OLEDCOEF1,
+			  VC4_SET_FIELD(vc4_ctm_s31_32_to_s0_9(ctm->matrix[1]),
+					SCALER_OLEDCOEF1_G_TO_R) |
+			  VC4_SET_FIELD(vc4_ctm_s31_32_to_s0_9(ctm->matrix[4]),
+					SCALER_OLEDCOEF1_G_TO_G) |
+			  VC4_SET_FIELD(vc4_ctm_s31_32_to_s0_9(ctm->matrix[7]),
+					SCALER_OLEDCOEF1_G_TO_B));
+		HVS_WRITE(SCALER_OLEDCOEF0,
+			  VC4_SET_FIELD(vc4_ctm_s31_32_to_s0_9(ctm->matrix[2]),
+					SCALER_OLEDCOEF0_B_TO_R) |
+			  VC4_SET_FIELD(vc4_ctm_s31_32_to_s0_9(ctm->matrix[5]),
+					SCALER_OLEDCOEF0_B_TO_G) |
+			  VC4_SET_FIELD(vc4_ctm_s31_32_to_s0_9(ctm->matrix[8]),
+					SCALER_OLEDCOEF0_B_TO_B));
+	}
+
+	HVS_WRITE(SCALER_OLEDOFFS,
+		  VC4_SET_FIELD(ctm_state->fifo, SCALER_OLEDOFFS_DISPFIFO));
+}
 
 static void
 vc4_atomic_complete_commit(struct drm_atomic_state *state)
@@ -36,6 +147,8 @@ vc4_atomic_complete_commit(struct drm_atomic_state *state)
 
 	drm_atomic_helper_commit_modeset_disables(dev, state);
 
+	vc4_ctm_commit(vc4, state);
+
 	drm_atomic_helper_commit_planes(dev, state, 0);
 
 	drm_atomic_helper_commit_modeset_enables(dev, state);
@@ -207,9 +320,89 @@ static struct drm_framebuffer *vc4_fb_create(struct drm_device *dev,
 	return drm_gem_fb_create(dev, file_priv, mode_cmd);
 }
 
+/* Our CTM has some peculiar limitations: we can only enable it for one CRTC
+ * at a time and the HW only supports S0.9 scalars. To account for the latter,
+ * we don't allow userland to set a CTM that we have no hope of approximating.
+ */
+static int
+vc4_ctm_atomic_check(struct drm_device *dev, struct drm_atomic_state *state)
+{
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	struct vc4_ctm_state *ctm_state = NULL;
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *old_crtc_state, *new_crtc_state;
+	struct drm_color_ctm *ctm;
+	int i;
+
+	for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
+		/* CTM is being disabled. */
+		if (!new_crtc_state->ctm && old_crtc_state->ctm) {
+			ctm_state = vc4_get_ctm_state(state, &vc4->ctm_manager);
+			if (IS_ERR(ctm_state))
+				return PTR_ERR(ctm_state);
+			ctm_state->fifo = 0;
+		}
+	}
+
+	for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
+		if (new_crtc_state->ctm == old_crtc_state->ctm)
+			continue;
+
+		if (!ctm_state) {
+			ctm_state = vc4_get_ctm_state(state, &vc4->ctm_manager);
+			if (IS_ERR(ctm_state))
+				return PTR_ERR(ctm_state);
+		}
+
+		/* CTM is being enabled or the matrix changed. */
+		if (new_crtc_state->ctm) {
+			/* fifo is 1-based since 0 disables CTM. */
+			int fifo = to_vc4_crtc(crtc)->channel + 1;
+
+			/* Check userland isn't trying to turn on CTM for more
+			 * than one CRTC at a time.
+			 */
+			if (ctm_state->fifo && ctm_state->fifo != fifo) {
+				DRM_DEBUG_DRIVER("Too many CTM configured\n");
+				return -EINVAL;
+			}
+
+			/* Check we can approximate the specified CTM.
+			 * We disallow scalars |c| > 1.0 since the HW has
+			 * no integer bits.
+			 */
+			ctm = new_crtc_state->ctm->data;
+			for (i = 0; i < ARRAY_SIZE(ctm->matrix); i++) {
+				u64 val = ctm->matrix[i];
+
+				val &= ~BIT_ULL(63);
+				if (val > BIT_ULL(32))
+					return -EINVAL;
+			}
+
+			ctm_state->fifo = fifo;
+			ctm_state->ctm = ctm;
+		}
+	}
+
+	return 0;
+}
+
+static int
+vc4_atomic_check(struct drm_device *dev, struct drm_atomic_state *state)
+{
+	int ret;
+
+	ret = vc4_ctm_atomic_check(dev, state);
+	if (ret < 0)
+		return ret;
+
+	return drm_atomic_helper_check(dev, state);
+}
+
 static const struct drm_mode_config_funcs vc4_mode_funcs = {
 	.output_poll_changed = drm_fb_helper_output_poll_changed,
-	.atomic_check = drm_atomic_helper_check,
+	.atomic_check = vc4_atomic_check,
 	.atomic_commit = vc4_atomic_commit,
 	.fb_create = vc4_fb_create,
 };
@@ -217,6 +410,7 @@ static const struct drm_mode_config_funcs vc4_mode_funcs = {
 int vc4_kms_load(struct drm_device *dev)
 {
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	struct vc4_ctm_state *ctm_state;
 	int ret;
 
 	sema_init(&vc4->async_modeset, 1);
@@ -237,6 +431,14 @@ int vc4_kms_load(struct drm_device *dev)
 	dev->mode_config.async_page_flip = true;
 	dev->mode_config.allow_fb_modifiers = true;
 
+	drm_modeset_lock_init(&vc4->ctm_state_lock);
+
+	ctm_state = kzalloc(sizeof(*ctm_state), GFP_KERNEL);
+	if (!ctm_state)
+		return -ENOMEM;
+	drm_atomic_private_obj_init(&vc4->ctm_manager, &ctm_state->base,
+				    &vc4_ctm_state_funcs);
+
 	drm_mode_config_reset(dev);
 
 	if (dev->mode_config.num_connector)
-- 
cgit v1.2.3


From c5dc6cf7f91f9e965a528910cf3ab96710d82dcf Mon Sep 17 00:00:00 2001
From: Stefan Schake <stschake@gmail.com>
Date: Fri, 20 Apr 2018 05:25:45 -0700
Subject: drm/vc4: Add CTM registers to debugfs

Now that we set the OLED* registers to do CTM, it's helpful to have them
in the register dump.

Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180420122545.40014-2-stschake@gmail.com
---
 drivers/gpu/drm/vc4/vc4_hvs.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/gpu/drm/vc4')

diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
index 2b62fc5b8d85..5d8c749c9749 100644
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -58,6 +58,10 @@ static const struct {
 	HVS_REG(SCALER_DISPSTAT2),
 	HVS_REG(SCALER_DISPBASE2),
 	HVS_REG(SCALER_DISPALPHA2),
+	HVS_REG(SCALER_OLEDOFFS),
+	HVS_REG(SCALER_OLEDCOEF0),
+	HVS_REG(SCALER_OLEDCOEF1),
+	HVS_REG(SCALER_OLEDCOEF2),
 };
 
 void vc4_hvs_dump_state(struct drm_device *dev)
-- 
cgit v1.2.3


From 5e7854bd036ec9b8d8a861def32ecbfd97ca4e77 Mon Sep 17 00:00:00 2001
From: Vaishali Thakkar <vthakkar1994@gmail.com>
Date: Wed, 25 Apr 2018 12:39:53 +0530
Subject: drm/vc4: make function vc4_allocate_bin_bo static

Sparse complains with following warning:
drivers/gpu/drm/vc4/vc4_v3d.c:222:1: warning: symbol
'vc4_allocate_bin_bo' was not declared. Should it be static?

Make vc4_allocate_bin static as it is not used outside of
vc4_v3d.c.

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425070953.17933-1-vthakkar1994@gmail.com
---
 drivers/gpu/drm/vc4/vc4_v3d.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/gpu/drm/vc4')

diff --git a/drivers/gpu/drm/vc4/vc4_v3d.c b/drivers/gpu/drm/vc4/vc4_v3d.c
index bfc2fa73d2ae..e47e29426078 100644
--- a/drivers/gpu/drm/vc4/vc4_v3d.c
+++ b/drivers/gpu/drm/vc4/vc4_v3d.c
@@ -218,8 +218,7 @@ try_again:
  * overall CMA pool before they make scenes complicated enough to run
  * out of bin space.
  */
-int
-vc4_allocate_bin_bo(struct drm_device *drm)
+static int vc4_allocate_bin_bo(struct drm_device *drm)
 {
 	struct vc4_dev *vc4 = to_vc4_dev(drm);
 	struct vc4_v3d *v3d = vc4->v3d;
-- 
cgit v1.2.3


From 1825067e2b49c984d4b1a77f3720a7ae2576d226 Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Tue, 31 Oct 2017 12:32:57 -0700
Subject: drm/vc4: Skip ULPS latching when we're in that ULPS state already.

It seems that trying to go from unlatched to unlatched will time out
waiting for STOP, and we can just skip that.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031193258.17373-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
 drivers/gpu/drm/vc4/vc4_dsi.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/gpu/drm/vc4')

diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
index 94085f8bcd68..8aa897835118 100644
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -753,6 +753,11 @@ static void vc4_dsi_ulps(struct vc4_dsi *dsi, bool ulps)
 			 (dsi->lanes > 2 ? DSI1_STAT_PHY_D2_STOP : 0) |
 			 (dsi->lanes > 3 ? DSI1_STAT_PHY_D3_STOP : 0));
 	int ret;
+	bool ulps_currently_enabled = (DSI_PORT_READ(PHY_AFEC0) &
+				       DSI_PORT_BIT(PHY_AFEC0_LATCH_ULPS));
+
+	if (ulps == ulps_currently_enabled)
+		return;
 
 	DSI_PORT_WRITE(STAT, stat_ulps);
 	DSI_PORT_WRITE(PHYC, DSI_PORT_READ(PHYC) | phyc_ulps);
-- 
cgit v1.2.3


From 818f5c8f4cd27747e8218e8a5fb230c322e02d1e Mon Sep 17 00:00:00 2001
From: Stefan Schake <stschake@gmail.com>
Date: Wed, 25 Apr 2018 00:03:45 +0200
Subject: drm/vc4: Syncobj import support

Allow userland to specify a syncobj that is waited on before a render job
starts processing.

v2: Use 0 as invalid syncobj to drop flag (Eric)
    Drop extra newline (Eric)

Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1524607427-12876-2-git-send-email-stschake@gmail.com
---
 drivers/gpu/drm/vc4/vc4_drv.h |  1 +
 drivers/gpu/drm/vc4/vc4_gem.c | 30 +++++++++++++++++++++++++-----
 2 files changed, 26 insertions(+), 5 deletions(-)

(limited to 'drivers/gpu/drm/vc4')

diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index 22589d39083c..554a4e810d5b 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -11,6 +11,7 @@
 #include <drm/drm_encoder.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_atomic.h>
+#include <drm/drm_syncobj.h>
 
 #include "uapi/drm/vc4_drm.h"
 
diff --git a/drivers/gpu/drm/vc4/vc4_gem.c b/drivers/gpu/drm/vc4/vc4_gem.c
index 2107b0daf8ef..e305ccdedf47 100644
--- a/drivers/gpu/drm/vc4/vc4_gem.c
+++ b/drivers/gpu/drm/vc4/vc4_gem.c
@@ -27,6 +27,7 @@
 #include <linux/device.h>
 #include <linux/io.h>
 #include <linux/sched/signal.h>
+#include <linux/dma-fence-array.h>
 
 #include "uapi/drm/vc4_drm.h"
 #include "vc4_drv.h"
@@ -1115,6 +1116,7 @@ vc4_submit_cl_ioctl(struct drm_device *dev, void *data,
 	struct drm_vc4_submit_cl *args = data;
 	struct vc4_exec_info *exec;
 	struct ww_acquire_ctx acquire_ctx;
+	struct dma_fence *in_fence;
 	int ret = 0;
 
 	if ((args->flags & ~(VC4_SUBMIT_CL_USE_CLEAR_COLOR |
@@ -1125,11 +1127,6 @@ vc4_submit_cl_ioctl(struct drm_device *dev, void *data,
 		return -EINVAL;
 	}
 
-	if (args->pad2 != 0) {
-		DRM_DEBUG("->pad2 must be set to zero\n");
-		return -EINVAL;
-	}
-
 	exec = kcalloc(1, sizeof(*exec), GFP_KERNEL);
 	if (!exec) {
 		DRM_ERROR("malloc failure on exec struct\n");
@@ -1164,6 +1161,29 @@ vc4_submit_cl_ioctl(struct drm_device *dev, void *data,
 		}
 	}
 
+	if (args->in_sync) {
+		ret = drm_syncobj_find_fence(file_priv, args->in_sync,
+					     &in_fence);
+		if (ret)
+			goto fail;
+
+		/* When the fence (or fence array) is exclusively from our
+		 * context we can skip the wait since jobs are executed in
+		 * order of their submission through this ioctl and this can
+		 * only have fences from a prior job.
+		 */
+		if (!dma_fence_match_context(in_fence,
+					     vc4->dma_fence_context)) {
+			ret = dma_fence_wait(in_fence, true);
+			if (ret) {
+				dma_fence_put(in_fence);
+				goto fail;
+			}
+		}
+
+		dma_fence_put(in_fence);
+	}
+
 	if (exec->args->bin_cl_size != 0) {
 		ret = vc4_get_bcl(dev, exec);
 		if (ret)
-- 
cgit v1.2.3


From e84fcb95e07442edd7ce3b13973523646dbc581a Mon Sep 17 00:00:00 2001
From: Stefan Schake <stschake@gmail.com>
Date: Wed, 25 Apr 2018 00:03:46 +0200
Subject: drm/vc4: Export fence through syncobj

Allow specifying a syncobj on render job submission where we store the
fence for the job. This gives userland flexible access to the fence.

v2: Use 0 as invalid syncobj to drop flag (Eric)
    Don't reintroduce the padding (Eric)

Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1524607427-12876-3-git-send-email-stschake@gmail.com
---
 drivers/gpu/drm/vc4/vc4_gem.c | 30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

(limited to 'drivers/gpu/drm/vc4')

diff --git a/drivers/gpu/drm/vc4/vc4_gem.c b/drivers/gpu/drm/vc4/vc4_gem.c
index e305ccdedf47..a4c4be3ac6af 100644
--- a/drivers/gpu/drm/vc4/vc4_gem.c
+++ b/drivers/gpu/drm/vc4/vc4_gem.c
@@ -656,7 +656,8 @@ retry:
  */
 static int
 vc4_queue_submit(struct drm_device *dev, struct vc4_exec_info *exec,
-		 struct ww_acquire_ctx *acquire_ctx)
+		 struct ww_acquire_ctx *acquire_ctx,
+		 struct drm_syncobj *out_sync)
 {
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct vc4_exec_info *renderjob;
@@ -679,6 +680,9 @@ vc4_queue_submit(struct drm_device *dev, struct vc4_exec_info *exec,
 	fence->seqno = exec->seqno;
 	exec->fence = &fence->base;
 
+	if (out_sync)
+		drm_syncobj_replace_fence(out_sync, exec->fence);
+
 	vc4_update_bo_seqnos(exec, seqno);
 
 	vc4_unlock_bo_reservations(dev, exec, acquire_ctx);
@@ -1114,6 +1118,7 @@ vc4_submit_cl_ioctl(struct drm_device *dev, void *data,
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct vc4_file *vc4file = file_priv->driver_priv;
 	struct drm_vc4_submit_cl *args = data;
+	struct drm_syncobj *out_sync = NULL;
 	struct vc4_exec_info *exec;
 	struct ww_acquire_ctx acquire_ctx;
 	struct dma_fence *in_fence;
@@ -1201,12 +1206,33 @@ vc4_submit_cl_ioctl(struct drm_device *dev, void *data,
 	if (ret)
 		goto fail;
 
+	if (args->out_sync) {
+		out_sync = drm_syncobj_find(file_priv, args->out_sync);
+		if (!out_sync) {
+			ret = -EINVAL;
+			goto fail;
+		}
+
+		/* We replace the fence in out_sync in vc4_queue_submit since
+		 * the render job could execute immediately after that call.
+		 * If it finishes before our ioctl processing resumes the
+		 * render job fence could already have been freed.
+		 */
+	}
+
 	/* Clear this out of the struct we'll be putting in the queue,
 	 * since it's part of our stack.
 	 */
 	exec->args = NULL;
 
-	ret = vc4_queue_submit(dev, exec, &acquire_ctx);
+	ret = vc4_queue_submit(dev, exec, &acquire_ctx, out_sync);
+
+	/* The syncobj isn't part of the exec data and we need to free our
+	 * reference even if job submission failed.
+	 */
+	if (out_sync)
+		drm_syncobj_put(out_sync);
+
 	if (ret)
 		goto fail;
 
-- 
cgit v1.2.3


From c720d8914397fe8efc568eea71e0dd240755a2d9 Mon Sep 17 00:00:00 2001
From: Stefan Schake <stschake@gmail.com>
Date: Wed, 25 Apr 2018 00:03:47 +0200
Subject: drm/vc4: Enable syncobj support

This doesn't require any additional functionality from the driver but
is a prerequisite to userland calling the syncobj ioctls.

Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1524607427-12876-4-git-send-email-stschake@gmail.com
---
 drivers/gpu/drm/vc4/vc4_drv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/gpu/drm/vc4')

diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c
index 40ddeaafd65f..d9b8b701d2ce 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.c
+++ b/drivers/gpu/drm/vc4/vc4_drv.c
@@ -175,7 +175,8 @@ static struct drm_driver vc4_drm_driver = {
 			    DRIVER_GEM |
 			    DRIVER_HAVE_IRQ |
 			    DRIVER_RENDER |
-			    DRIVER_PRIME),
+			    DRIVER_PRIME |
+			    DRIVER_SYNCOBJ),
 	.lastclose = drm_fb_helper_lastclose,
 	.open = vc4_open,
 	.postclose = vc4_close,
-- 
cgit v1.2.3


From 4c70ac7639f6af6d7c2d01f0307665a4b9afada7 Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Mon, 30 Apr 2018 16:59:27 -0700
Subject: drm/vc4: Add a pad field to align drm_vc4_submit_cl to 64 bits.

I had originally asked Stefan Schake to drop the pad field from the
syncobj changes that just landed, because I couldn't come up with a
reason to align to 64 bits.

Talking with Dave Airlie about the new v3d driver's submit ioctl, we
came up with a reason: sizeof() on 64-bit platforms may align to 64
bits, in which case the userspace will be submitting the aligned size
and the final 32 bits won't be zero-padded by the kernel.  If
userspace doesn't zero-fill, then a future ABI change adding a 32-bit
field at the end could potentially cause the kernel to read undefined
data from old userspace (our userspace happens to use structure
initialization that zero-fills, but as a general rule we try not to
rely on that in the kernel).

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180430235927.28712-1-eric@anholt.net
Reviewed-by: Stefan Schake <stschake@gmail.com>
---
 drivers/gpu/drm/vc4/vc4_gem.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/gpu/drm/vc4')

diff --git a/drivers/gpu/drm/vc4/vc4_gem.c b/drivers/gpu/drm/vc4/vc4_gem.c
index a4c4be3ac6af..7910b9acedd6 100644
--- a/drivers/gpu/drm/vc4/vc4_gem.c
+++ b/drivers/gpu/drm/vc4/vc4_gem.c
@@ -1132,6 +1132,11 @@ vc4_submit_cl_ioctl(struct drm_device *dev, void *data,
 		return -EINVAL;
 	}
 
+	if (args->pad2 != 0) {
+		DRM_DEBUG("Invalid pad: 0x%08x\n", args->pad2);
+		return -EINVAL;
+	}
+
 	exec = kcalloc(1, sizeof(*exec), GFP_KERNEL);
 	if (!exec) {
 		DRM_ERROR("malloc failure on exec struct\n");
-- 
cgit v1.2.3