From d83f4131c2e06ef93cd3d6d44bb3475728790ab6 Mon Sep 17 00:00:00 2001 From: Pierre-Yves MORDRET Date: Tue, 17 Oct 2017 15:43:47 +0200 Subject: dmaengine: stm32_mdma: activate pack/unpack feature If source and destination bus width differs pack/unpack MDMA feature has to be activated for alignment. This pack/unpack feature implies to have both source/destination address and buffer length aligned on bus width. Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver") Signed-off-by: Pierre-Yves MORDRET Signed-off-by: Vinod Koul --- drivers/dma/stm32-mdma.c | 84 ++++++++++++++++++++++++++++-------------------- 1 file changed, 50 insertions(+), 34 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/stm32-mdma.c b/drivers/dma/stm32-mdma.c index d3be6bffdf12..daa1602eb9f5 100644 --- a/drivers/dma/stm32-mdma.c +++ b/drivers/dma/stm32-mdma.c @@ -387,14 +387,20 @@ static int stm32_mdma_get_width(struct stm32_mdma_chan *chan, } } -static enum dma_slave_buswidth stm32_mdma_get_max_width(u32 buf_len, u32 tlen) +static enum dma_slave_buswidth stm32_mdma_get_max_width(dma_addr_t addr, + u32 buf_len, u32 tlen) { enum dma_slave_buswidth max_width = DMA_SLAVE_BUSWIDTH_8_BYTES; for (max_width = DMA_SLAVE_BUSWIDTH_8_BYTES; max_width > DMA_SLAVE_BUSWIDTH_1_BYTE; max_width >>= 1) { - if (((buf_len % max_width) == 0) && (tlen >= max_width)) + /* + * Address and buffer length both have to be aligned on + * bus width + */ + if ((((buf_len | addr) & (max_width - 1)) == 0) && + tlen >= max_width) break; } @@ -486,7 +492,8 @@ static void stm32_mdma_set_bus(struct stm32_mdma_device *dmadev, u32 *ctbr, static int stm32_mdma_set_xfer_param(struct stm32_mdma_chan *chan, enum dma_transfer_direction direction, u32 *mdma_ccr, u32 *mdma_ctcr, - u32 *mdma_ctbr, u32 buf_len) + u32 *mdma_ctbr, dma_addr_t addr, + u32 buf_len) { struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan); struct stm32_mdma_chan_config *chan_config = &chan->chan_config; @@ -520,6 +527,9 @@ static int stm32_mdma_set_xfer_param(struct stm32_mdma_chan *chan, ctcr &= ~STM32_MDMA_CTCR_LEN2_MSK; ctcr |= STM32_MDMA_CTCR_TLEN((tlen - 1)); + /* Disable Pack Enable */ + ctcr &= ~STM32_MDMA_CTCR_PKE; + /* Check burst size constraints */ if (src_maxburst * src_addr_width > STM32_MDMA_MAX_BURST || dst_maxburst * dst_addr_width > STM32_MDMA_MAX_BURST) { @@ -551,6 +561,8 @@ static int stm32_mdma_set_xfer_param(struct stm32_mdma_chan *chan, switch (direction) { case DMA_MEM_TO_DEV: + dst_addr = chan->dma_config.dst_addr; + /* Set device data size */ dst_bus_width = stm32_mdma_get_width(chan, dst_addr_width); if (dst_bus_width < 0) @@ -567,7 +579,7 @@ static int stm32_mdma_set_xfer_param(struct stm32_mdma_chan *chan, ctcr |= STM32_MDMA_CTCR_DBURST((ilog2(dst_best_burst))); /* Set memory data size */ - src_addr_width = stm32_mdma_get_max_width(buf_len, tlen); + src_addr_width = stm32_mdma_get_max_width(addr, buf_len, tlen); chan->mem_width = src_addr_width; src_bus_width = stm32_mdma_get_width(chan, src_addr_width); if (src_bus_width < 0) @@ -587,15 +599,19 @@ static int stm32_mdma_set_xfer_param(struct stm32_mdma_chan *chan, ctcr |= STM32_MDMA_CTCR_SBURST((ilog2(src_best_burst))); /* Select bus */ - dst_addr = chan->dma_config.dst_addr; stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_DBUS, dst_addr); + if (dst_bus_width != src_bus_width) + ctcr |= STM32_MDMA_CTCR_PKE; + /* Set destination address */ stm32_mdma_write(dmadev, STM32_MDMA_CDAR(chan->id), dst_addr); break; case DMA_DEV_TO_MEM: + src_addr = chan->dma_config.src_addr; + /* Set device data size */ src_bus_width = stm32_mdma_get_width(chan, src_addr_width); if (src_bus_width < 0) @@ -611,7 +627,7 @@ static int stm32_mdma_set_xfer_param(struct stm32_mdma_chan *chan, ctcr |= STM32_MDMA_CTCR_SBURST((ilog2(src_best_burst))); /* Set memory data size */ - dst_addr_width = stm32_mdma_get_max_width(buf_len, tlen); + dst_addr_width = stm32_mdma_get_max_width(addr, buf_len, tlen); chan->mem_width = dst_addr_width; dst_bus_width = stm32_mdma_get_width(chan, dst_addr_width); if (dst_bus_width < 0) @@ -630,10 +646,12 @@ static int stm32_mdma_set_xfer_param(struct stm32_mdma_chan *chan, ctcr |= STM32_MDMA_CTCR_DBURST((ilog2(dst_best_burst))); /* Select bus */ - src_addr = chan->dma_config.src_addr; stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_SBUS, src_addr); + if (dst_bus_width != src_bus_width) + ctcr |= STM32_MDMA_CTCR_PKE; + /* Set source address */ stm32_mdma_write(dmadev, STM32_MDMA_CSAR(chan->id), src_addr); break; @@ -719,23 +737,27 @@ static int stm32_mdma_setup_xfer(struct stm32_mdma_chan *chan, return -EINVAL; } - ret = stm32_mdma_set_xfer_param(chan, direction, &ccr, &ctcr, - &ctbr, sg_dma_len(sg)); - if (ret < 0) - return ret; - if (direction == DMA_MEM_TO_DEV) { src_addr = sg_dma_address(sg); dst_addr = dma_config->dst_addr; + ret = stm32_mdma_set_xfer_param(chan, direction, &ccr, + &ctcr, &ctbr, src_addr, + sg_dma_len(sg)); stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_SBUS, src_addr); } else { src_addr = dma_config->src_addr; dst_addr = sg_dma_address(sg); + ret = stm32_mdma_set_xfer_param(chan, direction, &ccr, + &ctcr, &ctbr, dst_addr, + sg_dma_len(sg)); stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_DBUS, dst_addr); } + if (ret < 0) + return ret; + stm32_mdma_setup_hwdesc(chan, desc, direction, i, src_addr, dst_addr, sg_dma_len(sg), ctcr, ctbr, i == sg_len - 1, i == 0, false); @@ -830,27 +852,29 @@ stm32_mdma_prep_dma_cyclic(struct dma_chan *c, dma_addr_t buf_addr, if (!desc) return NULL; - ret = stm32_mdma_set_xfer_param(chan, direction, &ccr, &ctcr, &ctbr, - period_len); - if (ret < 0) - goto xfer_setup_err; - - /* Enable interrupts */ - ccr &= ~STM32_MDMA_CCR_IRQ_MASK; - ccr |= STM32_MDMA_CCR_TEIE | STM32_MDMA_CCR_CTCIE | STM32_MDMA_CCR_BTIE; - desc->ccr = ccr; - /* Select bus */ if (direction == DMA_MEM_TO_DEV) { src_addr = buf_addr; + ret = stm32_mdma_set_xfer_param(chan, direction, &ccr, &ctcr, + &ctbr, src_addr, period_len); stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_SBUS, src_addr); } else { dst_addr = buf_addr; + ret = stm32_mdma_set_xfer_param(chan, direction, &ccr, &ctcr, + &ctbr, dst_addr, period_len); stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_DBUS, dst_addr); } + if (ret < 0) + goto xfer_setup_err; + + /* Enable interrupts */ + ccr &= ~STM32_MDMA_CCR_IRQ_MASK; + ccr |= STM32_MDMA_CCR_TEIE | STM32_MDMA_CCR_CTCIE | STM32_MDMA_CCR_BTIE; + desc->ccr = ccr; + /* Configure hwdesc list */ for (i = 0; i < count; i++) { if (direction == DMA_MEM_TO_DEV) { @@ -956,9 +980,7 @@ stm32_mdma_prep_dma_memcpy(struct dma_chan *c, dma_addr_t dest, dma_addr_t src, ctcr |= STM32_MDMA_CTCR_TLEN((tlen - 1)); /* Set source best burst size */ - max_width = stm32_mdma_get_max_width(len, tlen); - if (src % max_width) - max_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + max_width = stm32_mdma_get_max_width(src, len, tlen); src_bus_width = stm32_mdma_get_width(chan, max_width); max_burst = tlen / max_width; @@ -971,9 +993,7 @@ stm32_mdma_prep_dma_memcpy(struct dma_chan *c, dma_addr_t dest, dma_addr_t src, STM32_MDMA_CTCR_SINCOS(src_bus_width); /* Set destination best burst size */ - max_width = stm32_mdma_get_max_width(len, tlen); - if (dest % max_width) - max_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + max_width = stm32_mdma_get_max_width(dest, len, tlen); dst_bus_width = stm32_mdma_get_width(chan, max_width); max_burst = tlen / max_width; @@ -1014,9 +1034,7 @@ stm32_mdma_prep_dma_memcpy(struct dma_chan *c, dma_addr_t dest, dma_addr_t src, STM32_MDMA_MAX_BLOCK_LEN); /* Set source best burst size */ - max_width = stm32_mdma_get_max_width(len, tlen); - if (src % max_width) - max_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + max_width = stm32_mdma_get_max_width(src, len, tlen); src_bus_width = stm32_mdma_get_width(chan, max_width); max_burst = tlen / max_width; @@ -1030,9 +1048,7 @@ stm32_mdma_prep_dma_memcpy(struct dma_chan *c, dma_addr_t dest, dma_addr_t src, STM32_MDMA_CTCR_SINCOS(src_bus_width); /* Set destination best burst size */ - max_width = stm32_mdma_get_max_width(len, tlen); - if (dest % max_width) - max_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + max_width = stm32_mdma_get_max_width(dest, len, tlen); dst_bus_width = stm32_mdma_get_width(chan, max_width); max_burst = tlen / max_width; -- cgit v1.2.3