From 8411aa5059edd584f7022f1dc300aa2f8f89fd06 Mon Sep 17 00:00:00 2001 From: Wesley Cheng Date: Tue, 17 Mar 2020 13:53:31 -0700 Subject: clk: qcom: gcc: Add USB3 PIPE clock and GDSC for SM8150 This adds the USB3 PIPE clock and GDSC structures, so that the USB driver can vote for these resources to be enabled/disabled when required. Both are needed for SS and HS USB paths to operate properly. The GDSC will allow the USB system to be brought out of reset, while the PIPE clock is needed for data transactions between the PHY and controller. Signed-off-by: Wesley Cheng Link: https://lkml.kernel.org/r/1584478412-7798-2-git-send-email-wcheng@codeaurora.org Signed-off-by: Stephen Boyd --- drivers/clk/qcom/gcc-sm8150.c | 52 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c index 20877214acff..ef98fdc51755 100644 --- a/drivers/clk/qcom/gcc-sm8150.c +++ b/drivers/clk/qcom/gcc-sm8150.c @@ -21,6 +21,7 @@ #include "clk-rcg.h" #include "clk-regmap.h" #include "reset.h" +#include "gdsc.h" enum { P_BI_TCXO, @@ -3171,6 +3172,18 @@ static struct clk_branch gcc_usb3_prim_phy_com_aux_clk = { }, }; +static struct clk_branch gcc_usb3_prim_phy_pipe_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0xf058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_prim_phy_pipe_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + static struct clk_branch gcc_usb3_sec_clkref_clk = { .halt_reg = 0x8c028, .halt_check = BRANCH_HALT, @@ -3218,6 +3231,18 @@ static struct clk_branch gcc_usb3_sec_phy_com_aux_clk = { }, }; +static struct clk_branch gcc_usb3_sec_phy_pipe_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x10058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_sec_phy_pipe_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + /* * Clock ON depends on external parent 'config noc', so cant poll * delay and also mark as crtitical for video boot @@ -3292,6 +3317,24 @@ static struct clk_branch gcc_video_xo_clk = { }, }; +static struct gdsc usb30_prim_gdsc = { + .gdscr = 0xf004, + .pd = { + .name = "usb30_prim_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + .flags = POLL_CFG_GDSCR, +}; + +static struct gdsc usb30_sec_gdsc = { + .gdscr = 0x10004, + .pd = { + .name = "usb30_sec_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + .flags = POLL_CFG_GDSCR, +}; + static struct clk_regmap *gcc_sm8150_clocks[] = { [GCC_AGGRE_NOC_PCIE_TBU_CLK] = &gcc_aggre_noc_pcie_tbu_clk.clkr, [GCC_AGGRE_UFS_CARD_AXI_CLK] = &gcc_aggre_ufs_card_axi_clk.clkr, @@ -3480,10 +3523,12 @@ static struct clk_regmap *gcc_sm8150_clocks[] = { [GCC_USB3_PRIM_PHY_AUX_CLK] = &gcc_usb3_prim_phy_aux_clk.clkr, [GCC_USB3_PRIM_PHY_AUX_CLK_SRC] = &gcc_usb3_prim_phy_aux_clk_src.clkr, [GCC_USB3_PRIM_PHY_COM_AUX_CLK] = &gcc_usb3_prim_phy_com_aux_clk.clkr, + [GCC_USB3_PRIM_PHY_PIPE_CLK] = &gcc_usb3_prim_phy_pipe_clk.clkr, [GCC_USB3_SEC_CLKREF_CLK] = &gcc_usb3_sec_clkref_clk.clkr, [GCC_USB3_SEC_PHY_AUX_CLK] = &gcc_usb3_sec_phy_aux_clk.clkr, [GCC_USB3_SEC_PHY_AUX_CLK_SRC] = &gcc_usb3_sec_phy_aux_clk_src.clkr, [GCC_USB3_SEC_PHY_COM_AUX_CLK] = &gcc_usb3_sec_phy_com_aux_clk.clkr, + [GCC_USB3_SEC_PHY_PIPE_CLK] = &gcc_usb3_sec_phy_pipe_clk.clkr, [GCC_VIDEO_AHB_CLK] = &gcc_video_ahb_clk.clkr, [GCC_VIDEO_AXI0_CLK] = &gcc_video_axi0_clk.clkr, [GCC_VIDEO_AXI1_CLK] = &gcc_video_axi1_clk.clkr, @@ -3527,6 +3572,11 @@ static const struct qcom_reset_map gcc_sm8150_resets[] = { [GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 }, }; +static struct gdsc *gcc_sm8150_gdscs[] = { + [USB30_PRIM_GDSC] = &usb30_prim_gdsc, + [USB30_SEC_GDSC] = &usb30_sec_gdsc, +}; + static const struct regmap_config gcc_sm8150_regmap_config = { .reg_bits = 32, .reg_stride = 4, @@ -3541,6 +3591,8 @@ static const struct qcom_cc_desc gcc_sm8150_desc = { .num_clks = ARRAY_SIZE(gcc_sm8150_clocks), .resets = gcc_sm8150_resets, .num_resets = ARRAY_SIZE(gcc_sm8150_resets), + .gdscs = gcc_sm8150_gdscs, + .num_gdscs = ARRAY_SIZE(gcc_sm8150_gdscs), }; static const struct of_device_id gcc_sm8150_match_table[] = { -- cgit v1.2.3