From 95e94c1fadcd1959857db45c2e11810a893badd0 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 13 Nov 2014 02:08:31 +0800 Subject: clk: sunxi: Implement A31 PLL6 as a divs clock for 2x output Some clock modules on the A31 use PLL6x2 as one of their inputs. This patch changes the PLL6 implementation for A31 to a divs clock, i.e. clock with multiple outputs that have different dividers. The first output will be the normal PLL6 output, and the second will be PLL6x2. This patch fixes the PLL6 N factor in the clock driver, and removes any /2 dividers in the PLL6 factors clock part. The N factor counts from 1 to 32, mapping to values 0 to 31, as shown in the A31 manual. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- drivers/clk/sunxi/clk-sunxi.c | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-) (limited to 'drivers/clk/sunxi') diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index d46949372762..570202582dcf 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -245,9 +245,9 @@ static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate, } /** - * sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6 - * PLL6 rate is calculated as follows - * rate = parent_rate * n * (k + 1) / 2 + * sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6x2 + * PLL6x2 rate is calculated as follows + * rate = parent_rate * (n + 1) * (k + 1) * parent_rate is always 24Mhz */ @@ -256,13 +256,7 @@ static void sun6i_a31_get_pll6_factors(u32 *freq, u32 parent_rate, { u8 div; - /* - * We always have 24MHz / 2, so we can just say that our - * parent clock is 12MHz. - */ - parent_rate = parent_rate / 2; - - /* Normalize value to a parent_rate multiple (24M / 2) */ + /* Normalize value to a parent_rate multiple (24M) */ div = *freq / parent_rate; *freq = parent_rate * div; @@ -274,7 +268,7 @@ static void sun6i_a31_get_pll6_factors(u32 *freq, u32 parent_rate, if (*k > 3) *k = 3; - *n = DIV_ROUND_UP(div, (*k+1)); + *n = DIV_ROUND_UP(div, (*k+1)) - 1; } /** @@ -445,6 +439,7 @@ static struct clk_factors_config sun6i_a31_pll6_config = { .nwidth = 5, .kshift = 4, .kwidth = 2, + .n_start = 1, }; static struct clk_factors_config sun4i_apb1_config = { @@ -504,6 +499,7 @@ static const struct factors_data sun6i_a31_pll6_data __initconst = { .enable = 31, .table = &sun6i_a31_pll6_config, .getter = sun6i_a31_get_pll6_factors, + .name = "pll6x2", }; static const struct factors_data sun4i_apb1_data __initconst = { @@ -942,6 +938,14 @@ static const struct divs_data pll6_divs_data __initconst = { } }; +static const struct divs_data sun6i_a31_pll6_divs_data __initconst = { + .factors = &sun6i_a31_pll6_data, + .ndivs = 1, + .div = { + { .fixed = 2 }, /* normal output */ + } +}; + /** * sunxi_divs_clk_setup() - Setup function for leaf divisors on clocks * @@ -1082,7 +1086,6 @@ static const struct of_device_id clk_factors_match[] __initconst = { {.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,}, {.compatible = "allwinner,sun8i-a23-pll1-clk", .data = &sun8i_a23_pll1_data,}, {.compatible = "allwinner,sun7i-a20-pll4-clk", .data = &sun7i_a20_pll4_data,}, - {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,}, {.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,}, {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,}, {} @@ -1101,6 +1104,7 @@ static const struct of_device_id clk_div_match[] __initconst = { static const struct of_device_id clk_divs_match[] __initconst = { {.compatible = "allwinner,sun4i-a10-pll5-clk", .data = &pll5_divs_data,}, {.compatible = "allwinner,sun4i-a10-pll6-clk", .data = &pll6_divs_data,}, + {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_divs_data,}, {} }; -- cgit v1.2.3