From 945b47441d83d2392ac9f984e0267ad521f24268 Mon Sep 17 00:00:00 2001 From: Lior Amsalem Date: Tue, 30 Jun 2015 16:09:49 +0200 Subject: ata: pmp: add quirk for Marvell 4140 SATA PMP This commit adds the necessary quirk to make the Marvell 4140 SATA PMP work properly. This PMP doesn't like SRST on port number 4 (the host port) so this commit marks this port as not supporting SRST. Signed-off-by: Lior Amsalem Reviewed-by: Nadav Haklai Signed-off-by: Thomas Petazzoni Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/libata-pmp.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 7ccc084bf1df..85aa76116a30 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -460,6 +460,13 @@ static void sata_pmp_quirks(struct ata_port *ap) ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA; } + } else if (vendor == 0x11ab && devid == 0x4140) { + /* Marvell 4140 quirks */ + ata_for_each_link(link, ap, EDGE) { + /* port 4 is for SEMB device and it doesn't like SRST */ + if (link->pmp == 4) + link->flags |= ATA_LFLAG_DISABLED; + } } } -- cgit v1.2.3 From 08c85d2a599d967ede38a847f5594447b6100642 Mon Sep 17 00:00:00 2001 From: Aleksei Mamlin Date: Wed, 1 Jul 2015 13:48:30 +0300 Subject: libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for HP 250GB SATA disk VB0250EAVER Enabling AA on HP 250GB SATA disk VB0250EAVER causes errors: [ 3.788362] ata3.00: failed to enable AA (error_mask=0x1) [ 3.789243] ata3.00: failed to enable AA (error_mask=0x1) Add the ATA_HORKAGE_BROKEN_FPDMA_AA for this specific harddisk. tj: Collected FPDMA_AA entries and updated comment. Signed-off-by: Aleksei Mamlin Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/libata-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index e83fc3d0da9c..58a6db8f0833 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4174,9 +4174,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "ST3320[68]13AS", "SD1[5-9]", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - /* Seagate Momentus SpinPoint M8 seem to have FPMDA_AA issues */ + /* drives which fail FPDMA_AA activation (some may freeze afterwards) */ { "ST1000LM024 HN-M101MBB", "2AR10001", ATA_HORKAGE_BROKEN_FPDMA_AA }, { "ST1000LM024 HN-M101MBB", "2BA30001", ATA_HORKAGE_BROKEN_FPDMA_AA }, + { "VB0250EAVER", "HPG7", ATA_HORKAGE_BROKEN_FPDMA_AA }, /* Blacklist entries taken from Silicon Image 3124/3132 Windows driver .inf file - also several Linux problem reports */ -- cgit v1.2.3 From 71d126fd28de2d4d9b7b2088dbccd7ca62fad6e0 Mon Sep 17 00:00:00 2001 From: Arne Fitzenreiter Date: Wed, 15 Jul 2015 13:54:36 +0200 Subject: libata: add ATA_HORKAGE_NOTRIM Some devices lose data on TRIM whether queued or not. This patch adds a horkage to disable TRIM. tj: Collapsed unnecessary if() nesting. Signed-off-by: Arne Fitzenreiter Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/libata-scsi.c | 3 ++- drivers/ata/libata-transport.c | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 3131adcc1f87..641a61a59e89 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2568,7 +2568,8 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) rbuf[14] = (lowest_aligned >> 8) & 0x3f; rbuf[15] = lowest_aligned; - if (ata_id_has_trim(args->id)) { + if (ata_id_has_trim(args->id) && + !(dev->horkage & ATA_HORKAGE_NOTRIM)) { rbuf[14] |= 0x80; /* LBPME */ if (ata_id_has_zero_after_trim(args->id) && diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c index d6c37bcd416d..e2d94972962d 100644 --- a/drivers/ata/libata-transport.c +++ b/drivers/ata/libata-transport.c @@ -569,6 +569,8 @@ show_ata_dev_trim(struct device *dev, if (!ata_id_has_trim(ata_dev->id)) mode = "unsupported"; + else if (ata_dev->horkage & ATA_HORKAGE_NOTRIM) + mode = "forced_unsupported"; else if (ata_dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM) mode = "forced_unqueued"; else if (ata_fpdma_dsm_supported(ata_dev)) -- cgit v1.2.3 From cda57b1b05cf7b8b99ab4b732bea0b05b6c015cc Mon Sep 17 00:00:00 2001 From: Arne Fitzenreiter Date: Wed, 15 Jul 2015 13:54:37 +0200 Subject: libata: force disable trim for SuperSSpeed S238 This device loses blocks, often the partition table area, on trim. Disable TRIM. http://pcengines.ch/msata16a.htm Signed-off-by: Arne Fitzenreiter Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/libata-core.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 58a6db8f0833..ed2b218ea64d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4239,6 +4239,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "Samsung SSD 8*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, + /* devices that don't properly handle TRIM commands */ + { "SuperSSpeed S238*", NULL, ATA_HORKAGE_NOTRIM, }, + /* * As defined, the DRAT (Deterministic Read After Trim) and RZAT * (Return Zero After Trim) flags in the ATA Command Set are -- cgit v1.2.3 From af34d637637eabaf49406eb35c948cd51ba262a6 Mon Sep 17 00:00:00 2001 From: David Milburn Date: Mon, 13 Jul 2015 11:48:23 -0500 Subject: libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit Since no longer limiting max_sectors to BLK_DEF_MAX_SECTORS (commit 34b48db66e08), data corruption may occur on ST380013AS drive configured on 82801JI (ICH10 Family) SATA controller. This patch will allow the driver to limit max_sectors as before # cat /sys/block/sdb/queue/max_sectors_kb 512 I was able to double the max_sectors_kb value up to 16384 on linux-4.2.0-rc2 before seeing corruption, but seems safer to use previous limit. Without this patch max_sectors_kb will be 32767. tj: Minor comment update. Reported-by: Jeff Moyer Signed-off-by: David Milburn Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org # v3.19 and later Fixes: 34b48db66e08 ("block: remove artifical max_hw_sectors cap") --- drivers/ata/libata-core.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index ed2b218ea64d..68202a8a3a0b 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2478,6 +2478,10 @@ int ata_dev_configure(struct ata_device *dev) dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, dev->max_sectors); + if (dev->horkage & ATA_HORKAGE_MAX_SEC_1024) + dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_1024, + dev->max_sectors); + if (dev->horkage & ATA_HORKAGE_MAX_SEC_LBA48) dev->max_sectors = ATA_MAX_SECTORS_LBA48; @@ -4146,6 +4150,12 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "Slimtype DVD A DS8A8SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 }, { "Slimtype DVD A DS8A9SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 }, + /* + * Causes silent data corruption with higher max sects. + * http://lkml.kernel.org/g/x49wpy40ysk.fsf@segfault.boston.devel.redhat.com + */ + { "ST380013AS", "3.20", ATA_HORKAGE_MAX_SEC_1024 }, + /* Devices we expect to fail diagnostics */ /* Devices where NCQ should be avoided */ -- cgit v1.2.3 From d531be2ca2f27cca5f041b6a140504999144a617 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Wed, 8 Jul 2015 13:06:12 -0400 Subject: libata: increase the timeout when setting transfer mode I have a ST4000DM000 disk. If Linux is booted while the disk is spun down, the command that sets transfer mode causes the disk to spin up. The spin-up takes longer than the default 5s timeout, so the command fails and timeout is reported. Fix this by increasing the timeout to 15s, which is enough for the disk to spin up. Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo --- drivers/ata/libata-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 68202a8a3a0b..12b176a10d57 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4515,7 +4515,8 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev) else /* In the ancient relic department - skip all of this */ return 0; - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); + /* On some disks, this command causes spin-up, so we need longer timeout */ + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 15000); DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; -- cgit v1.2.3 From 9051bd393cf25e76dfb45409792719a854661500 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Wed, 15 Jul 2015 21:03:23 -0400 Subject: libata: Do not blacklist M510DC A new Micron drive was just announced, once again recycling the first part of the model string. Add an underscore to the M510/M550 pattern to avoid picking up the new DC drive. Signed-off-by: Martin K. Petersen Cc: Signed-off-by: Tejun Heo --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 12b176a10d57..db5d9f79a247 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4240,7 +4240,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "Crucial_CT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, - { "Micron_M5[15]0*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | + { "Micron_M5[15]0_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "Crucial_CT*M550*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, -- cgit v1.2.3