From 6929da4427b4335365dd51ab0b7dd2a0393656f0 Mon Sep 17 00:00:00 2001 From: Alan Date: Fri, 5 Jan 2007 16:37:01 -0800 Subject: [PATCH] hpt37x: Two important bug fixes The HPT37x driver very carefully handles DMA completions and the needed fixups are done on pci registers 0x50 and 0x52. This is unfortunate because the actual registers are 0x50 and 0x54. Fixing this offset cures the second channel problems reported. Secondly there are some problems with the HPT370 and certain ATA drives. The filter code however only filters ATAPI devices due to a reversed type check. Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/ata/pata_hpt37x.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 47082df7199e..dfb306057cf4 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -25,7 +25,7 @@ #include #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.5.1" +#define DRV_VERSION "0.5.2" struct hpt_clock { u8 xfer_speed; @@ -416,7 +416,7 @@ static const char *bad_ata100_5[] = { static unsigned long hpt370_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask) { - if (adev->class != ATA_DEV_ATA) { + if (adev->class == ATA_DEV_ATA) { if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33)) mask &= ~ATA_MASK_UDMA; if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5)) @@ -749,7 +749,7 @@ static void hpt37x_bmdma_stop(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - int mscreg = 0x50 + 2 * ap->port_no; + int mscreg = 0x50 + 4 * ap->port_no; u8 bwsr_stat, msc_stat; pci_read_config_byte(pdev, 0x6A, &bwsr_stat); -- cgit v1.2.3