From 9a829ccfc833269bdb85751f5048288ab93678ac Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 17 Apr 2007 23:44:08 +0900 Subject: libata: convert ata_pci_init_native_mode() users to new init model Convert drivers which use ata_pci_init_native_mode() to new init model. ata_pci_init_native_host() is used instead. sata_nv, sata_uli and sata_sis are in this category. Tested on nVidia Corporation CK804 Serial ATA Controller [10de:0054] in both BMDMA and ADMA mode. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/sata_nv.c | 97 +++++++++++++++++++++------------------------------ 1 file changed, 40 insertions(+), 57 deletions(-) (limited to 'drivers/ata/sata_nv.c') diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 8a9473b16ec3..02169740ed24 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -369,7 +369,6 @@ static const struct ata_port_operations nv_generic_ops = { .error_handler = nv_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, .data_xfer = ata_data_xfer, - .irq_handler = nv_generic_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -396,7 +395,6 @@ static const struct ata_port_operations nv_nf2_ops = { .error_handler = nv_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, .data_xfer = ata_data_xfer, - .irq_handler = nv_nf2_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -423,7 +421,6 @@ static const struct ata_port_operations nv_ck804_ops = { .error_handler = nv_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, .data_xfer = ata_data_xfer, - .irq_handler = nv_ck804_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -452,7 +449,6 @@ static const struct ata_port_operations nv_adma_ops = { .error_handler = nv_adma_error_handler, .post_internal_cmd = nv_adma_post_internal_cmd, .data_xfer = ata_data_xfer, - .irq_handler = nv_adma_interrupt, .irq_clear = nv_adma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -477,6 +473,7 @@ static struct ata_port_info nv_port_info[] = { .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, .port_ops = &nv_generic_ops, + .irq_handler = nv_generic_interrupt, }, /* nforce2/3 */ { @@ -487,6 +484,7 @@ static struct ata_port_info nv_port_info[] = { .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, .port_ops = &nv_nf2_ops, + .irq_handler = nv_nf2_interrupt, }, /* ck804 */ { @@ -497,6 +495,7 @@ static struct ata_port_info nv_port_info[] = { .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, .port_ops = &nv_ck804_ops, + .irq_handler = nv_ck804_interrupt, }, /* ADMA */ { @@ -508,6 +507,7 @@ static struct ata_port_info nv_port_info[] = { .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, .port_ops = &nv_adma_ops, + .irq_handler = nv_adma_interrupt, }, }; @@ -1079,14 +1079,14 @@ static int nv_adma_port_resume(struct ata_port *ap) } #endif -static void nv_adma_setup_port(struct ata_probe_ent *probe_ent, unsigned int port) +static void nv_adma_setup_port(struct ata_port *ap) { - void __iomem *mmio = probe_ent->iomap[NV_MMIO_BAR]; - struct ata_ioports *ioport = &probe_ent->port[port]; + void __iomem *mmio = ap->host->iomap[NV_MMIO_BAR]; + struct ata_ioports *ioport = &ap->ioaddr; VPRINTK("ENTER\n"); - mmio += NV_ADMA_PORT + port * NV_ADMA_PORT_SIZE; + mmio += NV_ADMA_PORT + ap->port_no * NV_ADMA_PORT_SIZE; ioport->cmd_addr = mmio; ioport->data_addr = mmio + (ATA_REG_DATA * 4); @@ -1103,9 +1103,9 @@ static void nv_adma_setup_port(struct ata_probe_ent *probe_ent, unsigned int por ioport->ctl_addr = mmio + 0x20; } -static int nv_adma_host_init(struct ata_probe_ent *probe_ent) +static int nv_adma_host_init(struct ata_host *host) { - struct pci_dev *pdev = to_pci_dev(probe_ent->dev); + struct pci_dev *pdev = to_pci_dev(host->dev); unsigned int i; u32 tmp32; @@ -1120,8 +1120,8 @@ static int nv_adma_host_init(struct ata_probe_ent *probe_ent) pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32); - for (i = 0; i < probe_ent->n_ports; i++) - nv_adma_setup_port(probe_ent, i); + for (i = 0; i < host->n_ports; i++) + nv_adma_setup_port(host->ports[i]); return 0; } @@ -1480,14 +1480,13 @@ static void nv_adma_error_handler(struct ata_port *ap) static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; - struct ata_port_info *ppi[2]; - struct ata_probe_ent *probe_ent; + const struct ata_port_info *ppi[2]; + struct ata_host *host; struct nv_host_priv *hpriv; int rc; u32 bar; void __iomem *base; unsigned long type = ent->driver_data; - int mask_set = 0; // Make sure this is a SATA controller by counting the number of bars // (NVIDIA SATA controllers will always have six bars). Otherwise, @@ -1503,50 +1502,38 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) return rc; - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pcim_pin_device(pdev); - return rc; - } - - if(type >= CK804 && adma_enabled) { + /* determine type and allocate host */ + if (type >= CK804 && adma_enabled) { dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n"); type = ADMA; - if(!pci_set_dma_mask(pdev, DMA_64BIT_MASK) && - !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) - mask_set = 1; - } - - if(!mask_set) { - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - return rc; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - return rc; } - rc = -ENOMEM; + ppi[0] = ppi[1] = &nv_port_info[type]; + rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host); + if (rc) + return rc; hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); if (!hpriv) return -ENOMEM; + hpriv->type = type; + host->private_data = hpriv; - ppi[0] = ppi[1] = &nv_port_info[type]; - probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); - if (!probe_ent) - return -ENOMEM; - - if (!pcim_iomap(pdev, NV_MMIO_BAR, 0)) - return -EIO; - probe_ent->iomap = pcim_iomap_table(pdev); + /* set 64bit dma masks, may fail */ + if (type == ADMA) { + if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0) + pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + } - probe_ent->private_data = hpriv; - hpriv->type = type; + /* request and iomap NV_MMIO_BAR */ + rc = pcim_iomap_regions(pdev, 1 << NV_MMIO_BAR, DRV_NAME); + if (rc) + return rc; - base = probe_ent->iomap[NV_MMIO_BAR]; - probe_ent->port[0].scr_addr = base + NV_PORT0_SCR_REG_OFFSET; - probe_ent->port[1].scr_addr = base + NV_PORT1_SCR_REG_OFFSET; + /* configure SCR access */ + base = host->iomap[NV_MMIO_BAR]; + host->ports[0]->ioaddr.scr_addr = base + NV_PORT0_SCR_REG_OFFSET; + host->ports[1]->ioaddr.scr_addr = base + NV_PORT1_SCR_REG_OFFSET; /* enable SATA space for CK804 */ if (type >= CK804) { @@ -1557,20 +1544,16 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); } - pci_set_master(pdev); - + /* init ADMA */ if (type == ADMA) { - rc = nv_adma_host_init(probe_ent); + rc = nv_adma_host_init(host); if (rc) return rc; } - rc = ata_device_add(probe_ent); - if (rc != NV_PORTS) - return -ENODEV; - - devm_kfree(&pdev->dev, probe_ent); - return 0; + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, ppi[0]->irq_handler, + IRQF_SHARED, ppi[0]->sht); } static void nv_remove_one (struct pci_dev *pdev) -- cgit v1.2.3