From eea08802f586acd6aef377d1b4a541821013cc0b Mon Sep 17 00:00:00 2001 From: Keerthy Date: Mon, 4 Apr 2016 11:07:15 +0530 Subject: ARM: dts: dra7: Correct clock tree for sys_32k_ck This is w.r.t J6/J6eco: 32clk is pseudo (erratum i856) - clock source. Errata i856 for the AM572x (DRA7xx) points out that the 32.768KHz external crystal is not enabled at power up. Instead the CPU falls back to using an emulation for the 32KHz clock which is SYSCLK1/610. SYSCLK1 is usually 20MHz on boards so far (which gives an emulated frequency of 32.786KHz) Modelling the same in device tree. Acked-by: Tero Kristo Signed-off-by: Keerthy Signed-off-by: Lokesh Vutla Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index d0bae06b7eb7..ef2164a99d0f 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -98,12 +98,20 @@ clock-frequency = <32768>; }; - sys_32k_ck: sys_32k_ck { + sys_clk32_crystal_ck: sys_clk32_crystal_ck { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; }; + sys_clk32_pseudo_ck: sys_clk32_pseudo_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin1>; + clock-mult = <1>; + clock-div = <610>; + }; + virt_12000000_ck: virt_12000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; @@ -2170,4 +2178,12 @@ ti,bit-shift = <22>; reg = <0x0558>; }; + + sys_32k_ck: sys_32k_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>; + ti,bit-shift = <8>; + reg = <0x6c4>; + }; }; -- cgit v1.2.3