From d76316fef3f2ecec210b78a38263a06bb4f6c1b9 Mon Sep 17 00:00:00 2001 From: Vaibhav Bedia Date: Mon, 7 May 2012 23:55:30 -0600 Subject: ARM: OMAP3+: dpll: Configure autoidle mode only if it's supported The current DPLL code enables and disables autoidle features without checking whether the autoidle register is available. Fix this by putting a check for the existence of the autoidle register in the DPLL data. With such a check in place, for DPLLs which do not support this feature, simply skipping the autoidle_reg entry in the DPLL data is sufficient. Signed-off-by: Vaibhav Bedia Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/dpll3xxx.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index fc56745676fa..f0f10beeffe8 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -142,7 +142,8 @@ static int _omap3_noncore_dpll_lock(struct clk *clk) ai = omap3_dpll_autoidle_read(clk); - omap3_dpll_deny_idle(clk); + if (ai) + omap3_dpll_deny_idle(clk); _omap3_dpll_write_clken(clk, DPLL_LOCKED); @@ -186,8 +187,6 @@ static int _omap3_noncore_dpll_bypass(struct clk *clk) if (ai) omap3_dpll_allow_idle(clk); - else - omap3_dpll_deny_idle(clk); return r; } @@ -216,8 +215,6 @@ static int _omap3_noncore_dpll_stop(struct clk *clk) if (ai) omap3_dpll_allow_idle(clk); - else - omap3_dpll_deny_idle(clk); return 0; } @@ -519,6 +516,9 @@ u32 omap3_dpll_autoidle_read(struct clk *clk) dd = clk->dpll_data; + if (!dd->autoidle_reg) + return -EINVAL; + v = __raw_readl(dd->autoidle_reg); v &= dd->autoidle_mask; v >>= __ffs(dd->autoidle_mask); @@ -545,6 +545,12 @@ void omap3_dpll_allow_idle(struct clk *clk) dd = clk->dpll_data; + if (!dd->autoidle_reg) { + pr_debug("clock: DPLL %s: autoidle not supported\n", + clk->name); + return; + } + /* * REVISIT: CORE DPLL can optionally enter low-power bypass * by writing 0x5 instead of 0x1. Add some mechanism to @@ -554,6 +560,7 @@ void omap3_dpll_allow_idle(struct clk *clk) v &= ~dd->autoidle_mask; v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask); __raw_writel(v, dd->autoidle_reg); + } /** @@ -572,6 +579,12 @@ void omap3_dpll_deny_idle(struct clk *clk) dd = clk->dpll_data; + if (!dd->autoidle_reg) { + pr_debug("clock: DPLL %s: autoidle not supported\n", + clk->name); + return; + } + v = __raw_readl(dd->autoidle_reg); v &= ~dd->autoidle_mask; v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask); -- cgit v1.2.3