From be0ec060b54f0481fb95d59086c1484a949c903c Mon Sep 17 00:00:00 2001 From: Hamish Martin Date: Wed, 20 May 2020 16:30:42 +1200 Subject: ARM: dts: bcm: HR2: Fix PPI interrupt types These error messages are output when booting on a BCM HR2 system: GIC: PPI11 is secure or misconfigured GIC: PPI13 is secure or misconfigured Per ARM documentation these interrupts are triggered on a rising edge. See ARM Cortex A-9 MPCore Technical Reference Manual, Revision r4p1, Section 3.3.8 Interrupt Configuration Registers. The same issue was resolved for NSP systems in commit 5f1aa51c7a1e ("ARM: dts: NSP: Fix PPI interrupt types"). Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file") Signed-off-by: Hamish Martin Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-hr2.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi index 6142c672811e..5e5f5ca3c86f 100644 --- a/arch/arm/boot/dts/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -75,7 +75,7 @@ timer@20200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x20200 0x100>; - interrupts = ; + interrupts = ; clocks = <&periph_clk>; }; @@ -83,7 +83,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x20600 0x20>; interrupts = ; + IRQ_TYPE_EDGE_RISING)>; clocks = <&periph_clk>; }; @@ -91,7 +91,7 @@ compatible = "arm,cortex-a9-twd-wdt"; reg = <0x20620 0x20>; interrupts = ; + IRQ_TYPE_EDGE_RISING)>; clocks = <&periph_clk>; }; -- cgit v1.2.3