From 8c793367d3741aa6b5546b174aac6a912d791877 Mon Sep 17 00:00:00 2001
From: Sathya Prakash M R <sathyap@ti.com>
Date: Mon, 24 Mar 2014 16:31:55 +0530
Subject: ARM: dts: am4372.dtsi: add DSS information

Add DT data for the display subsystem for AM4372. The DSS on AM4372 is
basically OMAP3's DSS, without DSI and VENC blocks.

Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/am4372.dtsi | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 1f852086d9b5..b825a7ab4440 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -856,6 +856,35 @@
 			ti,hwmods = "hdq1w";
 			status = "disabled";
 		};
+
+		dss: dss@4832a000 {
+			compatible = "ti,omap3-dss";
+			reg = <0x4832a000 0x200>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			clocks = <&disp_clk>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@4832a400 {
+				compatible = "ti,omap3-dispc";
+				reg = <0x4832a400 0x400>;
+				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&disp_clk>;
+				clock-names = "fck";
+			};
+
+			rfbi: rfbi@4832a800 {
+				compatible = "ti,omap3-rfbi";
+				reg = <0x4832a800 0x100>;
+				ti,hwmods = "dss_rfbi";
+				clocks = <&disp_clk>;
+				clock-names = "fck";
+			};
+		};
 	};
 };
 
-- 
cgit v1.2.3


From 0bacb529f83583b0a3a786062432edcdc7bc93a8 Mon Sep 17 00:00:00 2001
From: Sathya Prakash M R <sathyap@ti.com>
Date: Mon, 24 Mar 2014 16:31:56 +0530
Subject: ARM: dts: am437x-gp-evm: add LCD data

Add DT data for am437x-gp-evm's LCD panel.

Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/am437x-gp-evm.dts | 97 +++++++++++++++++++++++++++++++++++++
 1 file changed, 97 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index f432685957b8..c16d975c2ed2 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -19,6 +19,10 @@
 	model = "TI AM437x GP EVM";
 	compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
 
+	aliases {
+		display0 = &lcd0;
+	};
+
 	vmmcsd_fixed: fixedregulator-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
@@ -64,6 +68,44 @@
 				0x02000069      /* LEFT */
 				0x0201006c>;      /* DOWN */
 		};
+
+	lcd0: display {
+		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		/*
+		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
+		 * panel's enable GPIO, but we don't have HDMI driver support nor
+		 * support to switch between two displays, so using this gpio as
+		 * panel's enable should be safe.
+		 */
+		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <210>;
+			hback-porch = <16>;
+			hsync-len = <30>;
+			vback-porch = <10>;
+			vfront-porch = <22>;
+			vsync-len = <13>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
 };
 
 &am43xx_pinmux {
@@ -171,6 +213,47 @@
 			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
 		>;
 	};
+
+	dss_pins: dss_pins {
+		pinctrl-single,pins = <
+			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+
+		>;
+	};
+
+	lcd_pins: lcd_pins {
+		pinctrl-single,pins = <
+			/* GPIO 5_8 to select LCD / HDMI */
+			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+		>;
+	};
 };
 
 &i2c0 {
@@ -354,3 +437,17 @@
 		};
 	};
 };
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pins>;
+
+	port {
+		dpi_out: endpoint@0 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
-- 
cgit v1.2.3


From 999c3f1a440582083372b2c5842a1692b16be311 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 2 May 2014 13:54:21 +0300
Subject: ARM: dts: am43x-epos-evm: add LCD data

Add DT data for am43x-epos-evm's LCD panel.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/am43x-epos-evm.dts | 96 ++++++++++++++++++++++++++++++++++++
 1 file changed, 96 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index ad362c50e32e..19f1f7e87597 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -19,6 +19,10 @@
 	model = "TI AM43x EPOS EVM";
 	compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
 
+	aliases {
+		display0 = &lcd0;
+	};
+
 	vmmcsd_fixed: fixedregulator-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
@@ -27,6 +31,44 @@
 		enable-active-high;
 	};
 
+	lcd0: display {
+		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		/*
+		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
+		 * panel's enable GPIO, but we don't have HDMI driver support nor
+		 * support to switch between two displays, so using this gpio as
+		 * panel's enable should be safe.
+		 */
+		enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <210>;
+			hback-porch = <16>;
+			hsync-len = <30>;
+			vback-porch = <10>;
+			vfront-porch = <22>;
+			vsync-len = <13>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
 	am43xx_pinmux: pinmux@44e10800 {
 		cpsw_default: cpsw_default {
 			pinctrl-single,pins = <
@@ -161,6 +203,46 @@
 				0x234 (PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
 			>;
 		};
+
+		dss_pins: dss_pins {
+			pinctrl-single,pins = <
+				0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+				0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+				0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+				0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+				0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+				0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+				0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+				0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+			>;
+		};
+
+		lcd_pins: lcd_pins {
+			pinctrl-single,pins = <
+				/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
+				0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
+			>;
+		};
 	};
 
 	matrix_keypad: matrix_keypad@0 {
@@ -468,3 +550,17 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdq_pins>;
 };
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pins>;
+
+	port {
+		dpi_out: endpoint@0 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
-- 
cgit v1.2.3


From e7585c4fc74dda885dfc05b3b11d46337f003072 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 7 Mar 2014 12:45:54 +0200
Subject: ARM: dts: omap5.dtsi: add DSS nodes

Add OMAP5 DSS nodes to omap5.dtsi.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap5.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index fc9299ed1074..cbdf5131624b 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -917,6 +917,66 @@
 			ti,hwmods = "sata";
 		};
 
+		dss: dss@58000000 {
+			compatible = "ti,omap5-dss";
+			reg = <0x58000000 0x80>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			clocks = <&dss_dss_clk>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@58001000 {
+				compatible = "ti,omap5-dispc";
+				reg = <0x58001000 0x1000>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&dss_dss_clk>;
+				clock-names = "fck";
+			};
+
+			dsi1: encoder@58004000 {
+				compatible = "ti,omap5-dsi";
+				reg = <0x58004000 0x200>,
+				      <0x58004200 0x40>,
+				      <0x58004300 0x40>;
+				reg-names = "proto", "phy", "pll";
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_dsi1";
+				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+				clock-names = "fck", "sys_clk";
+			};
+
+			dsi2: encoder@58005000 {
+				compatible = "ti,omap5-dsi";
+				reg = <0x58009000 0x200>,
+				      <0x58009200 0x40>,
+				      <0x58009300 0x40>;
+				reg-names = "proto", "phy", "pll";
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_dsi2";
+				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+				clock-names = "fck", "sys_clk";
+			};
+
+			hdmi: encoder@58060000 {
+				compatible = "ti,omap5-hdmi";
+				reg = <0x58040000 0x200>,
+				      <0x58040200 0x80>,
+				      <0x58040300 0x80>,
+				      <0x58060000 0x19000>;
+				reg-names = "wp", "pll", "phy", "core";
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_hdmi";
+				clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
+				clock-names = "fck", "sys_clk";
+			};
+		};
 	};
 };
 
-- 
cgit v1.2.3


From 6f0ab9a1bd45d1d9794d9c013cf7160ba46a35c6 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 12 Mar 2014 11:53:26 +0200
Subject: ARM: dts: omap5-uevm.dts: add tca6424a

omap5-uevm has a tca6424a I/O expander. Add it to the .dts file.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap5-uevm.dts | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 3b99ec25b748..76877516f6df 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -434,6 +434,13 @@
 	pinctrl-0 = <&i2c5_pins>;
 
 	clock-frequency = <400000>;
+
+	gpio9: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
 
 &mcbsp3 {
-- 
cgit v1.2.3


From 6ac732e49800e471074185b130aea6e6f6df797c Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 12 Mar 2014 11:57:03 +0200
Subject: ARM: dts: omap5-uevm.dts: add display nodes

omap5-uevm has a single HDMI output. Add the necessary display
information, including pinmuxing.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap5-uevm.dts | 80 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 80 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 76877516f6df..1e1b05768cec 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -20,6 +20,10 @@
 		reg = <0x80000000 0x7F000000>; /* 2032 MB */
 	};
 
+	aliases {
+		display0 = &hdmi0;
+	};
+
 	vmmcsd_fixed: fixedregulator-mmcsd {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
@@ -51,6 +55,51 @@
 			default-state = "off";
 		};
 	};
+
+	tpd12s015: encoder@0 {
+		compatible = "ti,tpd12s015";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpd12s015_pins>;
+
+		gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>,	/* TCA6424A P01, CT CP HPD */
+			<&gpio9 1 GPIO_ACTIVE_HIGH>,	/* TCA6424A P00, LS OE */
+			<&gpio7 1 GPIO_ACTIVE_HIGH>;	/* GPIO 193, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "b";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
 };
 
 &omap5_pmx_core {
@@ -183,6 +232,19 @@
 		>;
 	};
 
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			0x0fc (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			0x100 (PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
+			0x102 (PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6)	/* hdmi_hpd.gpio7_193 */
+		>;
+	};
 };
 
 &omap5_pmx_wkup {
@@ -498,3 +560,21 @@
 &cpu0 {
 	cpu0-supply = <&smps123_reg>;
 };
+
+&dss {
+	status = "ok";
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&ldo4_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
-- 
cgit v1.2.3


From c2e138bc8ed80ae291d689917e88d2d09bf1d478 Mon Sep 17 00:00:00 2001
From: Marek Belisko <marek@goldelico.com>
Date: Thu, 8 May 2014 22:16:51 +0200
Subject: ARM: dts: omap3-gta04: Add display support

This patch add support for lcd display on gta04 board. Display control
is connected to spi (used spi bitbang driver).

Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap3-gta04.dts | 90 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts
index f8ad125fa46f..021311f7964b 100644
--- a/arch/arm/boot/dts/omap3-gta04.dts
+++ b/arch/arm/boot/dts/omap3-gta04.dts
@@ -44,6 +44,36 @@
 		ti,mcbsp = <&mcbsp2>;
 		ti,codec = <&twl_audio>;
 	};
+
+	spi_lcd {
+		compatible = "spi-gpio";
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_gpio_pins>;
+
+		gpio-sck = <&gpio1 12 0>;
+		gpio-miso = <&gpio1 18 0>;
+		gpio-mosi = <&gpio1 20 0>;
+		cs-gpios = <&gpio1 19 0>;
+		num-chipselects = <1>;
+
+		/* lcd panel */
+		lcd: td028ttec1@0 {
+			compatible = "toppoly,td028ttec1";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+
+			label = "lcd";
+			port {
+				lcd_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+		};
+	};
 };
 
 &omap3_pmx_core {
@@ -78,6 +108,47 @@
 			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
 		>;
 	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+               pinctrl-single,pins = <
+                       0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+                       0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+                       0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+                       0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+                       0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+                       0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+                       0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+                       0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+                       0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+                       0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+                       0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+                       0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+                       0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+                       0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+                       0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+                       0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+                       0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+                       0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+                       0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+                       0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+                       0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+                       0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+                       0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+                       0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+                       0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+                       0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+                       0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+                       0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+               >;
+       };
+
+	spi_gpio_pins: spi_gpio_pinmux {
+		pinctrl-single,pins = <0x5a8 (PIN_OUTPUT | MUX_MODE4) /* clk */
+			0x5b6 (PIN_OUTPUT | MUX_MODE4) /* cs */
+			0x5b8 (PIN_OUTPUT | MUX_MODE4) /* tx */
+			0x5b4 (PIN_INPUT | MUX_MODE4) /* rx */
+		>;
+	};
 };
 
 &i2c1 {
@@ -219,3 +290,22 @@
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <3150000>;
 };
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = < &dss_dpi_pins >;
+
+	status = "okay";
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
-- 
cgit v1.2.3


From bc10f310e2856f7bb80875fd7d8386836df4c85e Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Tue, 13 May 2014 14:32:05 -0700
Subject: ARM: dts: Add LCD panel sharp ls037v7dw01 support for omap3-evm and
 ldp

Looks like quite a few omap3 boards have sharp ls037v7dw01 that's
configured as various panel dpi entries for whatever legacy reasons.
For device tree based support, let's just configure these properly for
panel ls037v7dw01 instead of panel dpi.

This patch creates a common file for panel ls037v7dw01, and makes
boards ldp and omap3-evm to use it.

The ls037v7dw01 also seems to be coupled with an ad7846 touchscreen
controller for the omaps, so let's add a basic configuration for
the touchscreen also using the default values.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 arch/arm/boot/dts/omap3-evm-37xx.dts               | 50 +++++++++++++++
 arch/arm/boot/dts/omap3-evm-common.dtsi            | 26 ++++++++
 arch/arm/boot/dts/omap3-ldp.dts                    | 29 +++++++--
 .../boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi    | 71 ++++++++++++++++++++++
 4 files changed, 171 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi

(limited to 'arch')

diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index 4df68ad3736a..a181e30daaef 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -26,7 +26,44 @@
 	};
 };
 
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&dss_dpi_pins1
+		&dss_dpi_pins2
+	>;
+};
+
 &omap3_pmx_core {
+	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3)   /* dss_data18.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3)   /* dss_data19.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3)   /* dss_data20.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3)   /* dss_data21.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3)   /* dss_data22.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3)   /* dss_data23.dss_data5 */
+		>;
+	};
+
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
 			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
@@ -75,6 +112,19 @@
 	};
 };
 
+&omap3_pmx_wkup {
+	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			0x0a (PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			0x0c (PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			0x10 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			0x12 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			0x14 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			0x16 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+		>;
+	};
+};
+
 &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
index 3007e79c9cd6..8ae8f007c8ad 100644
--- a/arch/arm/boot/dts/omap3-evm-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@ -44,6 +44,11 @@
 
 #include "twl4030.dtsi"
 #include "twl4030_omap3.dtsi"
+#include "omap3-panel-sharp-ls037v7dw01.dtsi"
+
+&backlight0 {
+	gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
+};
 
 &i2c2 {
 	clock-frequency = <400000>;
@@ -61,6 +66,27 @@
 	};
 };
 
+&lcd_3v3 {
+	gpio = <&gpio5 25 GPIO_ACTIVE_LOW>;	/* gpio153 */
+	enable-active-low;
+};
+
+&lcd0 {
+	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
+	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
+	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
+		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
+		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
+};
+
+&mcspi1 {
+	tsc2046@0 {
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 0>;		/* gpio175 */
+		pendown-gpio = <&gpio6 15 0>;
+	};
+};
+
 &mmc1 {
 	vmmc-supply = <&vmmc1>;
 	vmmc_aux-supply = <&vsim>;
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index 0abe986a4ecc..9c751e420f37 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -164,6 +164,11 @@
 
 #include "twl4030.dtsi"
 #include "twl4030_omap3.dtsi"
+#include "omap3-panel-sharp-ls037v7dw01.dtsi"
+
+&backlight0 {
+	gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
+};
 
 &i2c2 {
 	clock-frequency = <400000>;
@@ -173,6 +178,25 @@
 	clock-frequency = <400000>;
 };
 
+/* tps61130rsa enabled by twl4030 regen */
+&lcd_3v3 {
+	regulator-always-on;
+};
+
+&lcd0 {
+	enable-gpios = <&twl_gpio 15 GPIO_ACTIVE_HIGH>;	/* lcd INI */
+	reset-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;	/* gpio55, lcd RESB */
+	mode-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;	/* gpio56, lcd MO */
+};
+
+&mcspi1 {
+	tsc2046@0 {
+		interrupt-parent = <&gpio2>;
+		interrupts = <22 0>;		/* gpio54 */
+		pendown-gpio = <&gpio2 22 0>;
+	};
+};
+
 &mmc1 {
 	/* See 35xx errata 2.1.1.128 in SPRZ278F */
 	compatible = "ti,omap3-pre-es3-hsmmc";
@@ -247,8 +271,3 @@
 	/* Needed for ads7846 */
         regulator-name = "vcc";
 };
-
-&vpll2 {
-       /* Needed for DSS */
-       regulator-name = "vdds_dsi";
-};
diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
new file mode 100644
index 000000000000..f4b1a61853e3
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
@@ -0,0 +1,71 @@
+/*
+ * Common file for omap dpi panels with QVGA and reset pins
+ *
+ * Note that the board specifc DTS file needs to specify
+ * at minimum the GPIO enable-gpios for display, and
+ * gpios for gpio-backlight.
+ */
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	backlight0: backlight {
+		compatible = "gpio-backlight";
+		default-on;
+	};
+
+	/* 3.3V GPIO controlled regulator for LCD_ENVDD */
+	lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <70000>;
+	};
+
+	lcd0: display {
+		compatible = "sharp,ls037v7dw01";
+		label = "lcd";
+		power-supply = <&lcd_3v3>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <18>;
+		};
+	};
+};
+
+&mcspi1 {
+	tsc2046@0 {
+		reg = <0>;			/* CS0 */
+		compatible = "ti,tsc2046";
+		spi-max-frequency = <1000000>;
+		vcc-supply = <&lcd_3v3>;
+		ti,x-min = /bits/ 16 <0>;
+		ti,x-max = /bits/ 16 <8000>;
+		ti,y-min = /bits/ 16 <0>;
+		ti,y-max = /bits/ 16 <4800>;
+		ti,x-plate-ohms = /bits/ 16 <40>;
+		ti,pressure-max = /bits/ 16 <255>;
+		ti,swap-xy;
+		linux,wakeup;
+	};
+};
-- 
cgit v1.2.3


From f376661d2f5d6aacd69093578c98dfa7d7a10832 Mon Sep 17 00:00:00 2001
From: Florian Vaussard <florian.vaussard@epfl.ch>
Date: Tue, 20 May 2014 15:58:55 +0200
Subject: ARM: dts: overo: Add support for DVI output

Summit and Tobi expansion boards have a HDMI connector with a TFP410
encoder. Add a common include file for this configuration, and then
use it for Summit and Tobi.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap3-overo-common-dvi.dtsi    | 111 +++++++++++++++++++++++
 arch/arm/boot/dts/omap3-overo-summit-common.dtsi |   1 +
 arch/arm/boot/dts/omap3-overo-tobi-common.dtsi   |   1 +
 3 files changed, 113 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap3-overo-common-dvi.dtsi

(limited to 'arch')

diff --git a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi
new file mode 100644
index 000000000000..802f704f67e5
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * DVI output for some Gumstix Overo boards (Tobi and Summit)
+ */
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &dvi0;
+	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
index 999d1cd4a09f..0ac97ba98549 100644
--- a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
@@ -11,6 +11,7 @@
  */
 
 #include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-dvi.dtsi"
 
 / {
 	leds {
diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
index 13df50b39442..9e24b6a1d07b 100644
--- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
@@ -11,6 +11,7 @@
  */
 
 #include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-dvi.dtsi"
 
 / {
 	leds {
-- 
cgit v1.2.3


From 4783dc847011028164dd6c7a048777b36c278d18 Mon Sep 17 00:00:00 2001
From: Florian Vaussard <florian.vaussard@epfl.ch>
Date: Tue, 20 May 2014 15:58:56 +0200
Subject: ARM: dts: overo: Add support for 4.3'' LCD output

Chestnut43, Gallop43 and Palo43 expansion boards have a ZIF connector
for a 4.3'' LCD. Add a common include file for this configuration, and
use it on relevant expansion boards.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 .../boot/dts/omap3-overo-chestnut43-common.dtsi    |   1 +
 arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi    | 178 +++++++++++++++++++++
 arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi |   1 +
 arch/arm/boot/dts/omap3-overo-palo43-common.dtsi   |   1 +
 4 files changed, 181 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi

(limited to 'arch')

diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
index 19de6ff79686..17b82f82638a 100644
--- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
@@ -11,6 +11,7 @@
  */
 
 #include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd43.dtsi"
 
 #include <dt-bindings/input/input.h>
 
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
new file mode 100644
index 000000000000..f5395b7da912
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
+ */
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+
+	lte430_pins: pinmux_lte430_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4)	/* uart2_cts.gpio_144 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4)	/* uart2_rts.gpio_145 */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	ads7846_pins: pinmux_ads7846_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* csi2_dx1.gpio_114 */
+		>;
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	lcd0: display@0 {
+		compatible = "samsung,lte430wq-f0c", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lte430_pins>;
+		enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;		/* gpio_144 */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <9200000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <8>;
+			hback-porch = <4>;
+			hsync-len = <41>;
+			vback-porch = <2>;
+			vfront-porch = <4>;
+			vsync-len = <10>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+
+	ads7846reg: ads7846-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "ads7846-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;		/* gpio_145 */
+
+		default-on;
+	};
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	/* touch controller */
+	ads7846@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ads7846_pins>;
+
+		compatible = "ti,ads7846";
+		vcc-supply = <&ads7846reg>;
+
+		reg = <0>;				/* CS0 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 0>;			/* gpio_114 */
+		pendown-gpio = <&gpio4 18 0>;
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		linux,wakeup;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
index 5e848c26986b..49d2254a99b0 100644
--- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
@@ -11,6 +11,7 @@
  */
 
 #include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd43.dtsi"
 
 #include <dt-bindings/input/input.h>
 
diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
index abea232825b9..087aedf5b902 100644
--- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
@@ -11,6 +11,7 @@
  */
 
 #include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd43.dtsi"
 
 #include <dt-bindings/input/input.h>
 
-- 
cgit v1.2.3


From 6f0c7a41c6bd22983f5b2327ea73bff370bd314c Mon Sep 17 00:00:00 2001
From: Florian Vaussard <florian.vaussard@epfl.ch>
Date: Tue, 20 May 2014 15:58:57 +0200
Subject: ARM: dts: overo: Add support for 3.5'' LCD output

Alto35 expansion board has a ZIF connector for a 3.5'' LCD.
Add a common include file for this configuration, and use it
on Alto35.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap3-overo-alto35-common.dtsi |   1 +
 arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi  | 165 +++++++++++++++++++++++
 2 files changed, 166 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi

(limited to 'arch')

diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
index 19d64864a109..7aae8fb82c1f 100644
--- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
@@ -11,6 +11,7 @@
  */
 
 #include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd35.dtsi"
 
 #include <dt-bindings/input/input.h>
 
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
new file mode 100644
index 000000000000..233c69e50ae3
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
+ */
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+
+	lb035_pins: pinmux_lb035_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4)	/* uart2_cts.gpio_144 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4)	/* uart2_rts.gpio_145 */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	ads7846_pins: pinmux_ads7846_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* csi2_dx1.gpio_114 */
+		>;
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	ads7846reg: ads7846-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "ads7846-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;		/* gpio_145 */
+
+		default-on;
+	};
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	lcd0: display@0 {
+		compatible = "lgphilips,lb035q02";
+		label = "lcd";
+
+		reg = <1>;					/* CS1 */
+		spi-max-frequency = <10000000>;
+		spi-cpol;
+		spi-cpha;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lb035_pins>;
+		enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;	/* gpio_144 */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	/* touch controller */
+	ads7846@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ads7846_pins>;
+
+		compatible = "ti,ads7846";
+		vcc-supply = <&ads7846reg>;
+
+		reg = <0>;				/* CS0 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 0>;			/* gpio_114 */
+		pendown-gpio = <&gpio4 18 0>;
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		linux,wakeup;
+	};
+};
-- 
cgit v1.2.3


From 843feccefe9b755312d666f089ee6a2e83ca76de Mon Sep 17 00:00:00 2001
From: Florian Vaussard <florian.vaussard@epfl.ch>
Date: Wed, 21 May 2014 11:15:06 +0200
Subject: ARM: dts: duovero-parlor: Add HDMI output

Add the necessary DTS nodes to enable the micro-HDMI output on Parlor
board.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap4-duovero-parlor.dts | 44 ++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
index cd53a64d8f2e..6dc84d9f9b4c 100644
--- a/arch/arm/boot/dts/omap4-duovero-parlor.dts
+++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -15,6 +15,10 @@
 	model = "OMAP4430 Gumstix Duovero on Parlor";
 	compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
 
+	aliases {
+		display0 = &hdmi0;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		led0 {
@@ -35,6 +39,21 @@
 			gpio-key,wakeup;
 		};
 	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "d";
+
+		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;	/* gpio_63 */
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
 };
 
 &omap4_pmx_core {
@@ -77,6 +96,15 @@
 			OMAP4_IOPAD(0x070, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48: amdix enabled */
 		>;
 	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)		/* hdmi_hpd.gpio_63 */
+			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
+		>;
+	};
 };
 
 &i2c2 {
@@ -143,4 +171,20 @@
 	};
 };
 
+&dss {
+	status = "ok";
+};
+
+&hdmi {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_connector_in>;
+		};
+	};
+};
 
-- 
cgit v1.2.3


From 53855b3095a814a0483e959facef0b7455904da0 Mon Sep 17 00:00:00 2001
From: Jyri Sarha <jsarha@ti.com>
Date: Mon, 12 May 2014 12:12:24 +0300
Subject: ARM: omap4.dtsi: Add audio related parametes to hdmi node

Adds HDMI audio sDMA properties.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap4.dtsi | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 203131ebb581..cbaf4ae21371 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -922,6 +922,8 @@
 				ti,hwmods = "dss_hdmi";
 				clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
 				clock-names = "fck", "sys_clk";
+				dmas = <&sdma 76>;
+				dma-names = "audio_tx";
 			};
 		};
 	};
-- 
cgit v1.2.3


From 7d0fde3986c35dc1400cb552776c0a640ac354d7 Mon Sep 17 00:00:00 2001
From: Jyri Sarha <jsarha@ti.com>
Date: Mon, 12 May 2014 12:12:26 +0300
Subject: ARM: omap5.dtsi: Add audio related parameters to hdmi node

Adds HDMI audio sDMA properties.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap5.dtsi | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index cbdf5131624b..bb6a607eebc1 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -975,6 +975,8 @@
 				ti,hwmods = "dss_hdmi";
 				clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
 				clock-names = "fck", "sys_clk";
+				dmas = <&sdma 76>;
+				dma-names = "audio_tx";
 			};
 		};
 	};
-- 
cgit v1.2.3