From 74ab8ccfb8f3133acf8b2a2a7bcfba9c1710960d Mon Sep 17 00:00:00 2001 From: Kathiravan T Date: Mon, 30 Nov 2020 16:31:45 +0530 Subject: arm64: dts: ipq6018: Add the QPIC peripheral nodes Add the QPIC BAM and QPIC NAND controller support and enable the same in board DTS file. Co-developed-by: Anusha Canchi Ramachandra Rao Signed-off-by: Anusha Canchi Ramachandra Rao Signed-off-by: Kathiravan T Link: https://lore.kernel.org/r/1606734105-12414-2-git-send-email-kathirav@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 16 +++++++++++ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 41 ++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts index e8eaa958c199..99cefe88f6f2 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts @@ -62,3 +62,19 @@ bias-pull-down; }; }; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index a94dac76bf3f..a366a05128c2 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -231,6 +231,17 @@ drive-strength = <8>; bias-pull-down; }; + + qpic_pins: qpic-pins { + pins = "gpio1", "gpio3", "gpio4", + "gpio5", "gpio6", "gpio7", + "gpio8", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", + "gpio15", "gpio17"; + function = "qpic_pad"; + drive-strength = <8>; + bias-disable; + }; }; gcc: gcc@1800000 { @@ -332,6 +343,36 @@ status = "disabled"; }; + qpic_bam: dma-controller@7984000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0 0x07984000 0x0 0x1a000>; + interrupts = ; + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "iface_clk", "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + qpic_nand: nand@79b0000 { + compatible = "qcom,ipq6018-nand"; + reg = <0x0 0x079b0000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + pinctrl-0 = <&qpic_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; -- cgit v1.2.3