From a7db50405216610c8a0d62b8b400180b6f366733 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Mon, 22 Jun 2009 08:08:07 -0600 Subject: PCI: remove pcibios_scan_all_fns() This was #define'd as 0 on all platforms, so let's get rid of it. This change makes pci_scan_slot() slightly easier to read. Cc: Yoshinori Sato Cc: Tony Luck Cc: David Howells Cc: "David S. Miller" Cc: Jeff Dike Cc: Ingo Molnar Cc: Ivan Kokshaysky Reviewed-by: Matthew Wilcox Acked-by: Russell King Acked-by: Ralf Baechle Acked-by: Kyle McMartin Acked-by: Benjamin Herrenschmidt Acked-by: Paul Mundt Acked-by: Arnd Bergmann Signed-off-by: Alex Chiang Signed-off-by: Jesse Barnes --- arch/x86/include/asm/pci.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/x86') diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index 1ff685ca221c..f76a162c082c 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -48,7 +48,6 @@ extern unsigned int pcibios_assign_all_busses(void); #else #define pcibios_assign_all_busses() 0 #endif -#define pcibios_scan_all_fns(a, b) 0 extern unsigned long pci_mem_start; #define PCIBIOS_MIN_IO 0x1000 -- cgit v1.2.3 From 2547089ca2db132e307ef68848ba029a8ec2f341 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 10 Jul 2009 14:04:30 -0700 Subject: x86/PCI: initialize PCI bus node numbers early The current mp_bus_to_node array is initialized only by AMD specific code, since AMD platforms have registers that can be used for determining mode numbers. On new Intel platforms it's necessary to initialize this array as well though, otherwise all PCI node numbers will be 0, when in fact they should be -1 (indicating that I/O isn't tied to any particular node). So move the mp_bus_to_node code into the common PCI code, and initialize it early with a default value of -1. This may be overridden later by arch code (e.g. the AMD code). With this change, PCI consistent memory and other node specific allocations (e.g. skbuff allocs) should occur on the "current" node. If, for performance reasons, applications want to be bound to specific nodes, they should open their devices only after being pinned to the CPU where they'll run, for maximum locality. Acked-by: Yinghai Lu Tested-by: Jesse Brandeburg Signed-off-by: Jesse Barnes --- arch/x86/pci/amd_bus.c | 64 +--------------------------------------------- arch/x86/pci/common.c | 69 ++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 70 insertions(+), 63 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index 3ffa10df20b9..572ee9782f2a 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -15,63 +15,6 @@ * also get peer root bus resource for io,mmio */ -#ifdef CONFIG_NUMA - -#define BUS_NR 256 - -#ifdef CONFIG_X86_64 - -static int mp_bus_to_node[BUS_NR]; - -void set_mp_bus_to_node(int busnum, int node) -{ - if (busnum >= 0 && busnum < BUS_NR) - mp_bus_to_node[busnum] = node; -} - -int get_mp_bus_to_node(int busnum) -{ - int node = -1; - - if (busnum < 0 || busnum > (BUS_NR - 1)) - return node; - - node = mp_bus_to_node[busnum]; - - /* - * let numa_node_id to decide it later in dma_alloc_pages - * if there is no ram on that node - */ - if (node != -1 && !node_online(node)) - node = -1; - - return node; -} - -#else /* CONFIG_X86_32 */ - -static unsigned char mp_bus_to_node[BUS_NR]; - -void set_mp_bus_to_node(int busnum, int node) -{ - if (busnum >= 0 && busnum < BUS_NR) - mp_bus_to_node[busnum] = (unsigned char) node; -} - -int get_mp_bus_to_node(int busnum) -{ - int node; - - if (busnum < 0 || busnum > (BUS_NR - 1)) - return 0; - node = mp_bus_to_node[busnum]; - return node; -} - -#endif /* CONFIG_X86_32 */ - -#endif /* CONFIG_NUMA */ - #ifdef CONFIG_X86_64 /* @@ -301,11 +244,6 @@ static int __init early_fill_mp_bus_info(void) u64 val; u32 address; -#ifdef CONFIG_NUMA - for (i = 0; i < BUS_NR; i++) - mp_bus_to_node[i] = -1; -#endif - if (!early_pci_allowed()) return -1; @@ -346,7 +284,7 @@ static int __init early_fill_mp_bus_info(void) node = (reg >> 4) & 0x07; #ifdef CONFIG_NUMA for (j = min_bus; j <= max_bus; j++) - mp_bus_to_node[j] = (unsigned char) node; + set_mp_bus_to_node(j, node); #endif link = (reg >> 8) & 0x03; diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 2202b6257b82..5db96d4304de 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -600,3 +600,72 @@ struct pci_bus * __devinit pci_scan_bus_with_sysdata(int busno) { return pci_scan_bus_on_node(busno, &pci_root_ops, -1); } + +/* + * NUMA info for PCI busses + * + * Early arch code is responsible for filling in reasonable values here. + * A node id of "-1" means "use current node". In other words, if a bus + * has a -1 node id, it's not tightly coupled to any particular chunk + * of memory (as is the case on some Nehalem systems). + */ +#ifdef CONFIG_NUMA + +#define BUS_NR 256 + +#ifdef CONFIG_X86_64 + +static int mp_bus_to_node[BUS_NR] = { + [0 ... BUS_NR - 1] = -1 +}; + +void set_mp_bus_to_node(int busnum, int node) +{ + if (busnum >= 0 && busnum < BUS_NR) + mp_bus_to_node[busnum] = node; +} + +int get_mp_bus_to_node(int busnum) +{ + int node = -1; + + if (busnum < 0 || busnum > (BUS_NR - 1)) + return node; + + node = mp_bus_to_node[busnum]; + + /* + * let numa_node_id to decide it later in dma_alloc_pages + * if there is no ram on that node + */ + if (node != -1 && !node_online(node)) + node = -1; + + return node; +} + +#else /* CONFIG_X86_32 */ + +static unsigned char mp_bus_to_node[BUS_NR] = { + [0 ... BUS_NR - 1] = -1 +}; + +void set_mp_bus_to_node(int busnum, int node) +{ + if (busnum >= 0 && busnum < BUS_NR) + mp_bus_to_node[busnum] = (unsigned char) node; +} + +int get_mp_bus_to_node(int busnum) +{ + int node; + + if (busnum < 0 || busnum > (BUS_NR - 1)) + return 0; + node = mp_bus_to_node[busnum]; + return node; +} + +#endif /* CONFIG_X86_32 */ + +#endif /* CONFIG_NUMA */ -- cgit v1.2.3 From 80286879c209034245f0a28a2171d2ec23b7481c Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Thu, 30 Jul 2009 16:15:18 -0600 Subject: PCI iommu: iommu=pt is a valid early param This avoids a "Malformed early option 'iommu'" on boot when trying to use pass-through mode. Signed-off-by: Alex Williamson Signed-off-by: Jesse Barnes --- arch/x86/kernel/pci-dma.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 1a041bcf506b..ae13e34f7248 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -212,10 +212,8 @@ static __init int iommu_setup(char *p) if (!strncmp(p, "soft", 4)) swiotlb = 1; #endif - if (!strncmp(p, "pt", 2)) { + if (!strncmp(p, "pt", 2)) iommu_pass_through = 1; - return 1; - } gart_parse_options(p); -- cgit v1.2.3 From 748df9a4c65625c386674c9b54dde73de6cc5af5 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 8 Sep 2009 12:16:18 +0200 Subject: x86/PCI: pci quirks, fix pci refcounting Stanse found a pci reference leak in quirk_amd_nb_node. Instead of putting nb_ht, there is a put of dev passed as an argument. http://stanse.fi.muni.cz/ Signed-off-by: Jiri Slaby Signed-off-by: Jesse Barnes --- arch/x86/kernel/quirks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/x86') diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index af71d06624bf..6c3b2c6fd772 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -508,7 +508,7 @@ static void __init quirk_amd_nb_node(struct pci_dev *dev) pci_read_config_dword(nb_ht, 0x60, &val); set_dev_node(&dev->dev, val & 7); - pci_dev_put(dev); + pci_dev_put(nb_ht); } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB, -- cgit v1.2.3