From 1f484aa6904697f390027c12fba130fa94b20831 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Fri, 3 Jul 2015 12:44:23 -0700 Subject: x86/entry: Move C entry and exit code to arch/x86/entry/common.c The entry and exit C helpers were confusingly scattered between ptrace.c and signal.c, even though they aren't specific to ptrace or signal handling. Move them together in a new file. This change just moves code around. It doesn't change anything. Signed-off-by: Andy Lutomirski Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: Denys Vlasenko Cc: Frederic Weisbecker Cc: H. Peter Anvin Cc: Kees Cook Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Rik van Riel Cc: Thomas Gleixner Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/324d686821266544d8572423cc281f961da445f4.1435952415.git.luto@kernel.org Signed-off-by: Ingo Molnar --- arch/x86/entry/Makefile | 1 + arch/x86/entry/common.c | 253 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 254 insertions(+) create mode 100644 arch/x86/entry/common.c (limited to 'arch/x86/entry') diff --git a/arch/x86/entry/Makefile b/arch/x86/entry/Makefile index 7a144971db79..bd55dedd7614 100644 --- a/arch/x86/entry/Makefile +++ b/arch/x86/entry/Makefile @@ -2,6 +2,7 @@ # Makefile for the x86 low level entry code # obj-y := entry_$(BITS).o thunk_$(BITS).o syscall_$(BITS).o +obj-y += common.o obj-y += vdso/ obj-y += vsyscall/ diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c new file mode 100644 index 000000000000..917d0c3cb851 --- /dev/null +++ b/arch/x86/entry/common.c @@ -0,0 +1,253 @@ +/* + * common.c - C code for kernel entry and exit + * Copyright (c) 2015 Andrew Lutomirski + * GPL v2 + * + * Based on asm and ptrace code by many authors. The code here originated + * in ptrace.c and signal.c. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define CREATE_TRACE_POINTS +#include + +static void do_audit_syscall_entry(struct pt_regs *regs, u32 arch) +{ +#ifdef CONFIG_X86_64 + if (arch == AUDIT_ARCH_X86_64) { + audit_syscall_entry(regs->orig_ax, regs->di, + regs->si, regs->dx, regs->r10); + } else +#endif + { + audit_syscall_entry(regs->orig_ax, regs->bx, + regs->cx, regs->dx, regs->si); + } +} + +/* + * We can return 0 to resume the syscall or anything else to go to phase + * 2. If we resume the syscall, we need to put something appropriate in + * regs->orig_ax. + * + * NB: We don't have full pt_regs here, but regs->orig_ax and regs->ax + * are fully functional. + * + * For phase 2's benefit, our return value is: + * 0: resume the syscall + * 1: go to phase 2; no seccomp phase 2 needed + * anything else: go to phase 2; pass return value to seccomp + */ +unsigned long syscall_trace_enter_phase1(struct pt_regs *regs, u32 arch) +{ + unsigned long ret = 0; + u32 work; + + BUG_ON(regs != task_pt_regs(current)); + + work = ACCESS_ONCE(current_thread_info()->flags) & + _TIF_WORK_SYSCALL_ENTRY; + + /* + * If TIF_NOHZ is set, we are required to call user_exit() before + * doing anything that could touch RCU. + */ + if (work & _TIF_NOHZ) { + user_exit(); + work &= ~_TIF_NOHZ; + } + +#ifdef CONFIG_SECCOMP + /* + * Do seccomp first -- it should minimize exposure of other + * code, and keeping seccomp fast is probably more valuable + * than the rest of this. + */ + if (work & _TIF_SECCOMP) { + struct seccomp_data sd; + + sd.arch = arch; + sd.nr = regs->orig_ax; + sd.instruction_pointer = regs->ip; +#ifdef CONFIG_X86_64 + if (arch == AUDIT_ARCH_X86_64) { + sd.args[0] = regs->di; + sd.args[1] = regs->si; + sd.args[2] = regs->dx; + sd.args[3] = regs->r10; + sd.args[4] = regs->r8; + sd.args[5] = regs->r9; + } else +#endif + { + sd.args[0] = regs->bx; + sd.args[1] = regs->cx; + sd.args[2] = regs->dx; + sd.args[3] = regs->si; + sd.args[4] = regs->di; + sd.args[5] = regs->bp; + } + + BUILD_BUG_ON(SECCOMP_PHASE1_OK != 0); + BUILD_BUG_ON(SECCOMP_PHASE1_SKIP != 1); + + ret = seccomp_phase1(&sd); + if (ret == SECCOMP_PHASE1_SKIP) { + regs->orig_ax = -1; + ret = 0; + } else if (ret != SECCOMP_PHASE1_OK) { + return ret; /* Go directly to phase 2 */ + } + + work &= ~_TIF_SECCOMP; + } +#endif + + /* Do our best to finish without phase 2. */ + if (work == 0) + return ret; /* seccomp and/or nohz only (ret == 0 here) */ + +#ifdef CONFIG_AUDITSYSCALL + if (work == _TIF_SYSCALL_AUDIT) { + /* + * If there is no more work to be done except auditing, + * then audit in phase 1. Phase 2 always audits, so, if + * we audit here, then we can't go on to phase 2. + */ + do_audit_syscall_entry(regs, arch); + return 0; + } +#endif + + return 1; /* Something is enabled that we can't handle in phase 1 */ +} + +/* Returns the syscall nr to run (which should match regs->orig_ax). */ +long syscall_trace_enter_phase2(struct pt_regs *regs, u32 arch, + unsigned long phase1_result) +{ + long ret = 0; + u32 work = ACCESS_ONCE(current_thread_info()->flags) & + _TIF_WORK_SYSCALL_ENTRY; + + BUG_ON(regs != task_pt_regs(current)); + + /* + * If we stepped into a sysenter/syscall insn, it trapped in + * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP. + * If user-mode had set TF itself, then it's still clear from + * do_debug() and we need to set it again to restore the user + * state. If we entered on the slow path, TF was already set. + */ + if (work & _TIF_SINGLESTEP) + regs->flags |= X86_EFLAGS_TF; + +#ifdef CONFIG_SECCOMP + /* + * Call seccomp_phase2 before running the other hooks so that + * they can see any changes made by a seccomp tracer. + */ + if (phase1_result > 1 && seccomp_phase2(phase1_result)) { + /* seccomp failures shouldn't expose any additional code. */ + return -1; + } +#endif + + if (unlikely(work & _TIF_SYSCALL_EMU)) + ret = -1L; + + if ((ret || test_thread_flag(TIF_SYSCALL_TRACE)) && + tracehook_report_syscall_entry(regs)) + ret = -1L; + + if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) + trace_sys_enter(regs, regs->orig_ax); + + do_audit_syscall_entry(regs, arch); + + return ret ?: regs->orig_ax; +} + +long syscall_trace_enter(struct pt_regs *regs) +{ + u32 arch = is_ia32_task() ? AUDIT_ARCH_I386 : AUDIT_ARCH_X86_64; + unsigned long phase1_result = syscall_trace_enter_phase1(regs, arch); + + if (phase1_result == 0) + return regs->orig_ax; + else + return syscall_trace_enter_phase2(regs, arch, phase1_result); +} + +void syscall_trace_leave(struct pt_regs *regs) +{ + bool step; + + /* + * We may come here right after calling schedule_user() + * or do_notify_resume(), in which case we can be in RCU + * user mode. + */ + user_exit(); + + audit_syscall_exit(regs); + + if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) + trace_sys_exit(regs, regs->ax); + + /* + * If TIF_SYSCALL_EMU is set, we only get here because of + * TIF_SINGLESTEP (i.e. this is PTRACE_SYSEMU_SINGLESTEP). + * We already reported this syscall instruction in + * syscall_trace_enter(). + */ + step = unlikely(test_thread_flag(TIF_SINGLESTEP)) && + !test_thread_flag(TIF_SYSCALL_EMU); + if (step || test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(regs, step); + + user_enter(); +} + +/* + * notification of userspace execution resumption + * - triggered by the TIF_WORK_MASK flags + */ +__visible void +do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags) +{ + user_exit(); + + if (thread_info_flags & _TIF_UPROBE) + uprobe_notify_resume(regs); + + /* deal with pending signal delivery */ + if (thread_info_flags & _TIF_SIGPENDING) + do_signal(regs); + + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + } + if (thread_info_flags & _TIF_USER_RETURN_NOTIFY) + fire_user_return_notifiers(); + + user_enter(); +} -- cgit v1.2.3