From 48ff3e04ffd5e1b578462eb1958f15ca122c7fbf Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 28 Sep 2009 15:04:04 +0900
Subject: sh: Handle ioport_map() cases for >= P1SEG addresses.

This fixes up the case where certain drivers already do their own
remapping and subsequently attempt to use the PIO calls for I/O. In this
case there is no additional remapping that needs to be done, and the
address can be casted in to the cookie directly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/io_generic.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
index 4ff507239286..b8fa6524760a 100644
--- a/arch/sh/kernel/io_generic.c
+++ b/arch/sh/kernel/io_generic.c
@@ -147,6 +147,9 @@ void generic_outsl(unsigned long port, const void *src, unsigned long count)
 
 void __iomem *generic_ioport_map(unsigned long addr, unsigned int size)
 {
+	if (PXSEG(addr) >= P1SEG)
+		return (void __iomem *)addr;
+
 	return (void __iomem *)(addr + generic_io_base);
 }
 
-- 
cgit v1.2.3


From d44ee12ad61ff7aa7a6344560bd430cb72fcbc27 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 28 Sep 2009 15:05:41 +0900
Subject: sh: Set the default I/O port base to P2SEG.

This bumps up the default I/O base to P2SEG, which allows legacy probing
to bail out gracefully rather than oopsing. Platforms that have a real
PIO offset still need to fix this up on their own, although most
platforms are content with P2SEG already.

The previous change to teach ioport_map() about >= P1SEG offsets in
combination with this patch allows both the already remapped and the
legacy address probing to pass through and succeed.

Fixes up an oops with i8042 on the sh7785lcr board.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/machvec.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index 548f6607fd0f..cbce639b108a 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -14,6 +14,7 @@
 #include <linux/string.h>
 #include <asm/machvec.h>
 #include <asm/sections.h>
+#include <asm/addrspace.h>
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -133,4 +134,6 @@ void __init sh_mv_setup(void)
 
 	if (!sh_mv.mv_nr_irqs)
 		sh_mv.mv_nr_irqs = NR_IRQS;
+
+	__set_io_port_base(P2SEG);
 }
-- 
cgit v1.2.3


From 421f7a5dbdd1720c718eed187c46cf202529cf7d Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sat, 26 Sep 2009 19:44:05 +0000
Subject: sh: Don't enable interrupts in the page fault path

There's already code in do_page_fault() to conditionally enable
interrupts, so we don't need to unconditonally enable them before
calling it. This fixes a lockdep warning where we called
trace_hardirqs_off() but with irqs still enabled.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh3/entry.S | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 0151933e5253..bb407ef0b91e 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -152,8 +152,6 @@ call_do_page_fault:
 	mov.l	1f, r0
 	mov.l	@r0, r6
 
-	sti
-
 	mov.l	3f, r0
 	mov.l	4f, r1
 	mov	r15, r4
-- 
cgit v1.2.3


From fe1dbfd3f992d5432d7463a5bd6c2fc96d3eccd8 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 28 Sep 2009 15:22:10 +0900
Subject: sh: magicpanelr2 and dreamcast can use the generic I/O base.

There is now no need for the magicpanelr2 and dreamcast platforms to set
their own I/O port bas values, given that the generic machvec code now
sets this to P2SEG for everyone.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-magicpanelr2.c   | 2 --
 arch/sh/boards/mach-dreamcast/setup.c | 2 --
 2 files changed, 4 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index 0a37c8bfc959..99ffc5f1c0dd 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -205,8 +205,6 @@ static void __init setup_port_multiplexing(void)
 
 static void __init mpr2_setup(char **cmdline_p)
 {
-	__set_io_port_base(0xa0000000);
-
 	/* set Pin Select Register A:
 	 * /PCC_CD1, /PCC_CD2,  PCC_BVD1, PCC_BVD2,
 	 * /IOIS16,  IRQ4,	IRQ5,	  USB1d_SUSPEND
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
index ebe99227d4e6..a4b7402d6176 100644
--- a/arch/sh/boards/mach-dreamcast/setup.c
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -42,8 +42,6 @@ static void __init dreamcast_setup(char **cmdline_p)
 	/* Acknowledge any previous events */
 	/* XXX */
 
-	__set_io_port_base(0xa0000000);
-
 	/* Assign all virtual IRQs to the System ASIC int. handler */
 	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
 		set_irq_chip_and_handler(i, &systemasic_int,
-- 
cgit v1.2.3


From 8810e0553fec6ff0a0db1431e388de39e2a2a512 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Mon, 28 Sep 2009 08:21:41 +0000
Subject: sh: mach-ecovec24: Add TouchScreen support

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 42 ++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 5f9881e16e2f..52912a6149c7 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
 #include <linux/input.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
@@ -376,6 +377,43 @@ static struct platform_device keysc_device = {
 	},
 };
 
+/* TouchScreen */
+#define IRQ0 32
+static int ts_get_pendown_state(void)
+{
+	int val = 0;
+	gpio_free(GPIO_FN_INTC_IRQ0);
+	gpio_request(GPIO_PTZ0, NULL);
+	gpio_direction_input(GPIO_PTZ0);
+
+	val = gpio_get_value(GPIO_PTZ0);
+
+	gpio_free(GPIO_PTZ0);
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+
+	return val ? 0 : 1;
+}
+
+static int ts_init(void)
+{
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+	return 0;
+}
+
+struct tsc2007_platform_data tsc2007_info = {
+	.model			= 2007,
+	.x_plate_ohms		= 180,
+	.get_pendown_state	= ts_get_pendown_state,
+	.init_platform_hw	= ts_init,
+};
+
+static struct i2c_board_info ts_i2c_clients = {
+	I2C_BOARD_INFO("tsc2007", 0x48),
+	.type		= "tsc2007",
+	.platform_data	= &tsc2007_info,
+	.irq		= IRQ0,
+};
+
 static struct platform_device *ecovec_devices[] __initdata = {
 	&heartbeat_device,
 	&nor_flash_device,
@@ -590,6 +628,10 @@ static int __init arch_setup(void)
 		 */
 		gpio_request(GPIO_PTF4, NULL);
 		gpio_direction_output(GPIO_PTF4, 1);
+
+		/* enable TouchScreen */
+		i2c_register_board_info(0, &ts_i2c_clients, 1);
+		set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
 	}
 
 	/* enable CEU0 */
-- 
cgit v1.2.3


From d5ce010c0327dee0a08a791827156ba84c544eea Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Wed, 30 Sep 2009 00:50:30 +0000
Subject: sh: mach-ecovec24: modify 1st MTD area to read only

Tested-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 52912a6149c7..0fb665d28603 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -71,7 +71,7 @@ static struct mtd_partition nor_flash_partitions[] = {
 		.name = "boot loader",
 		.offset = 0,
 		.size = (5 * 1024 * 1024),
-		.mask_flags = MTD_CAP_ROM,
+		.mask_flags = MTD_WRITEABLE,  /* force read-only */
 	}, {
 		.name = "free-area",
 		.offset = MTDPART_OFS_APPEND,
-- 
cgit v1.2.3


From 8406638ab041b3f1ab3d49d6fe1989e25f3ffcad Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 30 Sep 2009 14:02:42 +0900
Subject: sh: Disable unaligned kernel access printks by default.

Certain networking and USB workloads generate floods of these accesses,
so just disable it by default (thereby restoring the old behaviour). The
option remains configurable from userspace, and can still be used as a
debugging aid.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/traps_32.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 69bb1652eccd..e0b5e4b5accd 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -54,8 +54,8 @@ static unsigned long se_multi;
 /* bitfield: 1: warn 2: fixup 4: signal -> combinations 2|4 && 1|2|4 are not
    valid! */
 static int se_usermode = 3;
-/* 0: no warning 1: print a warning message */
-static int se_kernmode_warn = 1;
+/* 0: no warning 1: print a warning message, disabled by default */
+static int se_kernmode_warn;
 
 #ifdef CONFIG_PROC_FS
 static const char *se_usermode_action[] = {
-- 
cgit v1.2.3


From f16bf3e2e4076d4c20d9344d51fc6c4e43542e97 Mon Sep 17 00:00:00 2001
From: Lubomir Rintel <lkundrak@v3.sk>
Date: Wed, 30 Sep 2009 06:17:34 +0000
Subject: sh: Build fix: export __movmem

ERROR: "__movmem" [net/irda/irda.ko] undefined!
ERROR: "__movmem" [fs/nfsd/nfsd.ko] undefined!
ERROR: "__movmem" [fs/lockd/lockd.ko] undefined!
ERROR: "__movmem" [crypto/sha1_generic.ko] undefined!

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/sh_ksyms_32.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 8dbe26b17c44..86c270428357 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -84,6 +84,7 @@ DECLARE_EXPORT(__movstrSI60);
 DECLARE_EXPORT(__movstr_i4_even);
 DECLARE_EXPORT(__movstr_i4_odd);
 DECLARE_EXPORT(__movstrSI12_i4);
+DECLARE_EXPORT(__movmem);
 DECLARE_EXPORT(__movmem_i4_even);
 DECLARE_EXPORT(__movmem_i4_odd);
 DECLARE_EXPORT(__movmemSI12_i4);
-- 
cgit v1.2.3


From 9c472c4dd892b75c19d13b8fdbe35fbb09bdbd0d Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Fri, 2 Oct 2009 07:52:20 +0000
Subject: sh: mach-ecovec24: Document DS2 switch settings.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 0fb665d28603..bbc7859433b6 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -39,6 +39,20 @@
  *  0x1800_0000  MFI              16bit
  */
 
+/* SWITCH
+ *------------------------------
+ * DS2[1] = FlashROM write protect  ON     : write protect
+ *                                  OFF    : No write protect
+ * DS2[2] = RMII / TS, SCIF         ON     : RMII
+ *                                  OFF    : TS, SCIF3
+ * DS2[3] = Camera / Video          ON     : Camera
+ *                                  OFF    : NTSC/PAL (IN)
+ * DS2[5] = NTSC_OUT Clock          ON     : On board OSC
+ *                                  OFF    : SH7724 DV_CLK
+ * DS2[6-7] = MMC / SD              ON-OFF : SD
+ *                                  OFF-ON : MMC
+ */
+
 /* Heartbeat */
 static unsigned char led_pos[] = { 0, 1, 2, 3 };
 static struct heartbeat_data heartbeat_data = {
-- 
cgit v1.2.3


From f78bab30707e043bc16c5b11ebff794c123f68c1 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Wed, 7 Oct 2009 09:00:06 +0000
Subject: sh: enable sleep state LEDs on Ecovec24

Extend the ecovec24 board code to enable Power
Management LEDs showing the current sh7724 sleep state.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index bbc7859433b6..3b1ceb46fa54 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -512,6 +512,11 @@ static void __init sh_eth_init(void)
 #define IODRIVEA  0xA405018A
 static int __init arch_setup(void)
 {
+	/* enable STATUS0, STATUS2 and PDSTATUS */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+	gpio_request(GPIO_FN_STATUS2, NULL);
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+
 	/* enable SCIFA0 */
 	gpio_request(GPIO_FN_SCIF0_TXD, NULL);
 	gpio_request(GPIO_FN_SCIF0_RXD, NULL);
-- 
cgit v1.2.3


From a6325247f50628c7e53a483807d0ef2c24a7aa90 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 6 Oct 2009 21:22:21 +0000
Subject: sh: Sprinkle __uses_jump_to_uncached

Fix some callers of jump_to_uncached() and back_to_cached() that were
not annotated with __uses_jump_to_uncached.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh4.c    | 2 +-
 arch/sh/mm/cache-sh7705.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index b2453bbef4cd..a98c7d8984fa 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -43,7 +43,7 @@ static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) =
  * Called from kernel/module.c:sys_init_module and routine for a.out format,
  * signal handler code and kprobes code
  */
-static void sh4_flush_icache_range(void *args)
+static void __uses_jump_to_uncached sh4_flush_icache_range(void *args)
 {
 	struct flusher_data *data = args;
 	unsigned long start, end;
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index 2cadee2037ac..2601935eb589 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -78,7 +78,7 @@ static void sh7705_flush_icache_range(void *args)
 /*
  * Writeback&Invalidate the D-cache of the page
  */
-static void __flush_dcache_page(unsigned long phys)
+static void __uses_jump_to_uncached __flush_dcache_page(unsigned long phys)
 {
 	unsigned long ways, waysize, addrstart;
 	unsigned long flags;
@@ -144,7 +144,7 @@ static void sh7705_flush_dcache_page(void *arg)
 		__flush_dcache_page(PHYSADDR(page_address(page)));
 }
 
-static void sh7705_flush_cache_all(void *args)
+static void __uses_jump_to_uncached sh7705_flush_cache_all(void *args)
 {
 	unsigned long flags;
 
-- 
cgit v1.2.3


From fc2bdefdde89b54d8fcde7bbf7d0adc0ce5cb044 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 6 Oct 2009 21:22:22 +0000
Subject: sh: Plug PMB alloc memory leak

If we fail to allocate a PMB entry in pmb_remap() we must remember to
clear and free any PMB entries that we may have previously allocated,
e.g. if we were allocating a multiple entry mapping.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/pmb.c | 30 ++++++++++++++++++++++++------
 1 file changed, 24 insertions(+), 6 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index b1a714a92b14..58f935896b44 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -33,6 +33,8 @@
 
 #define NR_PMB_ENTRIES	16
 
+static void __pmb_unmap(struct pmb_entry *);
+
 static struct kmem_cache *pmb_cache;
 static unsigned long pmb_map;
 
@@ -218,9 +220,10 @@ static struct {
 long pmb_remap(unsigned long vaddr, unsigned long phys,
 	       unsigned long size, unsigned long flags)
 {
-	struct pmb_entry *pmbp;
+	struct pmb_entry *pmbp, *pmbe;
 	unsigned long wanted;
 	int pmb_flags, i;
+	long err;
 
 	/* Convert typical pgprot value to the PMB equivalent */
 	if (flags & _PAGE_CACHABLE) {
@@ -236,20 +239,22 @@ long pmb_remap(unsigned long vaddr, unsigned long phys,
 
 again:
 	for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++) {
-		struct pmb_entry *pmbe;
 		int ret;
 
 		if (size < pmb_sizes[i].size)
 			continue;
 
 		pmbe = pmb_alloc(vaddr, phys, pmb_flags | pmb_sizes[i].flag);
-		if (IS_ERR(pmbe))
-			return PTR_ERR(pmbe);
+		if (IS_ERR(pmbe)) {
+			err = PTR_ERR(pmbe);
+			goto out;
+		}
 
 		ret = set_pmb_entry(pmbe);
 		if (ret != 0) {
 			pmb_free(pmbe);
-			return -EBUSY;
+			err = -EBUSY;
+			goto out;
 		}
 
 		phys	+= pmb_sizes[i].size;
@@ -270,6 +275,12 @@ again:
 		goto again;
 
 	return wanted - size;
+
+out:
+	if (pmbp)
+		__pmb_unmap(pmbp);
+
+	return err;
 }
 
 void pmb_unmap(unsigned long addr)
@@ -283,12 +294,19 @@ void pmb_unmap(unsigned long addr)
 	if (unlikely(!pmbe))
 		return;
 
+	__pmb_unmap(pmbe);
+}
+
+static void __pmb_unmap(struct pmb_entry *pmbe)
+{
 	WARN_ON(!test_bit(pmbe->entry, &pmb_map));
 
 	do {
 		struct pmb_entry *pmblink = pmbe;
 
-		clear_pmb_entry(pmbe);
+		if (pmbe->entry != PMB_NO_ENTRY)
+			clear_pmb_entry(pmbe);
+
 		pmbe = pmblink->link;
 
 		pmb_free(pmblink);
-- 
cgit v1.2.3


From 2bea7ea7d57fd0022f4cd08ed3d4eb2d39a2920d Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 6 Oct 2009 21:22:27 +0000
Subject: sh: Try PMB mapping based on physical address, not mapping size

We should favour PMB mappings when the physical address cannot be
reached with 29-bits.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/ioremap_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c
index c3250614e3ae..a86eaa9d75a5 100644
--- a/arch/sh/mm/ioremap_32.c
+++ b/arch/sh/mm/ioremap_32.c
@@ -83,7 +83,7 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
 	 *
 	 * PMB entries are all pre-faulted.
 	 */
-	if (unlikely(size >= 0x1000000)) {
+	if (unlikely(phys_addr >= P1SEG)) {
 		unsigned long mapped = pmb_remap(addr, phys_addr, size, flags);
 
 		if (likely(mapped)) {
-- 
cgit v1.2.3


From a2767cfb1d9d97c3f861743f1ad595a80b75ec99 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 6 Oct 2009 21:22:34 +0000
Subject: sh: Don't allocate smaller sized mappings on every iteration

Currently, we've got the less than ideal situation where if we need to
allocate a 256MB mapping we'll allocate four entries like so,

	 entry 1: 128MB
	 entry 2:  64MB
	 entry 3:  16MB
	 entry 4:  16MB

This is because as we execute the loop in pmb_remap() we will
progressively try mapping the remaining address space with smaller and
smaller sizes. This isn't good because the size we use on one iteration
may be the perfect size to use on the next iteration, for instance when
the initial size is divisible by one of the PMB mapping sizes.

With this patch, we now only need two entries in the PMB to map 256MB of
address space,

	  entry 1: 128MB
	  entry 2: 128MB

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/pmb.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index 58f935896b44..aade31102112 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -269,6 +269,13 @@ again:
 			pmbp->link = pmbe;
 
 		pmbp = pmbe;
+
+		/*
+		 * Instead of trying smaller sizes on every iteration
+		 * (even if we succeed in allocating space), try using
+		 * pmb_sizes[i].size again.
+		 */
+		i--;
 	}
 
 	if (size >= 0x1000000)
-- 
cgit v1.2.3


From af67c3a9e68ee0a9e30ee8582577408adba0e299 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 13 Oct 2009 10:57:52 +0900
Subject: sh: update die() output.

This follows the ARM change, as SH had all of the same issues:

Make die() better match x86:
- add printing of the last accessed sysfs file
- ensure console_verbose() is called under the lock
- ensure we panic outside of oops_exit()

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/traps_32.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index e0b5e4b5accd..7a2ee3a6b8e7 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -25,6 +25,7 @@
 #include <linux/kexec.h>
 #include <linux/limits.h>
 #include <linux/proc_fs.h>
+#include <linux/sysfs.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/fpu.h>
@@ -159,12 +160,12 @@ void die(const char * str, struct pt_regs * regs, long err)
 
 	oops_enter();
 
-	console_verbose();
 	spin_lock_irq(&die_lock);
+	console_verbose();
 	bust_spinlocks(1);
 
 	printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
-
+	sysfs_printk_last_file();
 	print_modules();
 	show_regs(regs);
 
@@ -180,6 +181,7 @@ void die(const char * str, struct pt_regs * regs, long err)
 	bust_spinlocks(0);
 	add_taint(TAINT_DIE);
 	spin_unlock_irq(&die_lock);
+	oops_exit();
 
 	if (kexec_should_crash(current))
 		crash_kexec(regs);
@@ -190,7 +192,6 @@ void die(const char * str, struct pt_regs * regs, long err)
 	if (panic_on_oops)
 		panic("Fatal exception");
 
-	oops_exit();
 	do_exit(SIGSEGV);
 }
 
-- 
cgit v1.2.3


From 964f7e5a56814b32c727821de77d22bd7ef782bc Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 13 Oct 2009 11:18:34 +0900
Subject: sh: force dcache flush if dcache_dirty bit set.

This too follows the ARM change, given that the issue at hand applies to
all platforms that implement lazy D-cache writeback.

This fixes up the case when a page mapping disappears between the
flush_dcache_page() call (when PG_dcache_dirty is set for the page) and
the update_mmu_cache() call -- such as in the case of swap cache being
freed early. This kills off the mapping test in update_mmu_cache() and
switches to simply testing for PG_dcache_dirty.

Reported-by: Nitin Gupta <ngupta@vflare.org>
Reported-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index 35c37b7f717a..5e1091be9dc4 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -128,7 +128,7 @@ void __update_cache(struct vm_area_struct *vma,
 		return;
 
 	page = pfn_to_page(pfn);
-	if (pfn_valid(pfn) && page_mapping(page)) {
+	if (pfn_valid(pfn)) {
 		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
 		if (dirty) {
 			unsigned long addr = (unsigned long)page_address(page);
-- 
cgit v1.2.3


From 99222622422ac3398a846645f190109e218c743c Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 13 Oct 2009 12:42:48 +0900
Subject: sh: ftrace: Fix up syscall tracepoint support.

Sync up with latest core changes in the syscalls tracing area:

- tracing: Map syscall name to number (syscall_name_to_nr())
- tracing: Call arch_init_ftrace_syscalls at boot
- tracing: add support tracepoint ids (set_syscall_{enter,exit}_id())

Taken from the s390 change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/ftrace.c | 37 +++++++++++++++++++++++++++----------
 1 file changed, 27 insertions(+), 10 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c
index a3dcc6d5d253..2c48e267256e 100644
--- a/arch/sh/kernel/ftrace.c
+++ b/arch/sh/kernel/ftrace.c
@@ -291,31 +291,48 @@ struct syscall_metadata *syscall_nr_to_meta(int nr)
 	return syscalls_metadata[nr];
 }
 
-void arch_init_ftrace_syscalls(void)
+int syscall_name_to_nr(char *name)
+{
+	int i;
+
+	if (!syscalls_metadata)
+		return -1;
+	for (i = 0; i < NR_syscalls; i++)
+		if (syscalls_metadata[i])
+			if (!strcmp(syscalls_metadata[i]->name, name))
+				return i;
+	return -1;
+}
+
+void set_syscall_enter_id(int num, int id)
+{
+	syscalls_metadata[num]->enter_id = id;
+}
+
+void set_syscall_exit_id(int num, int id)
+{
+	syscalls_metadata[num]->exit_id = id;
+}
+
+static int __init arch_init_ftrace_syscalls(void)
 {
 	int i;
 	struct syscall_metadata *meta;
 	unsigned long **psys_syscall_table = &sys_call_table;
-	static atomic_t refs;
-
-	if (atomic_inc_return(&refs) != 1)
-		goto end;
 
 	syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) *
 					FTRACE_SYSCALL_MAX, GFP_KERNEL);
 	if (!syscalls_metadata) {
 		WARN_ON(1);
-		return;
+		return -ENOMEM;
 	}
 
 	for (i = 0; i < FTRACE_SYSCALL_MAX; i++) {
 		meta = find_syscall_meta(psys_syscall_table[i]);
 		syscalls_metadata[i] = meta;
 	}
-	return;
 
-	/* Paranoid: avoid overflow */
-end:
-	atomic_dec(&refs);
+	return 0;
 }
+arch_initcall(arch_init_ftrace_syscalls);
 #endif /* CONFIG_FTRACE_SYSCALLS */
-- 
cgit v1.2.3


From eaa47704d950d7f85b41a314a00529fb2615c10e Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 14 Oct 2009 14:12:41 +0900
Subject: sh: Use boot_cpu_data for FPU tests in sigcontext paths.

We do not want to use smp_processor_id() from these paths, as they trip
preempt BUGs. Switch the test over to the boot cpu directly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/signal_32.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index 6729703547a1..55d1f814e343 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -145,7 +145,7 @@ static inline int restore_sigcontext_fpu(struct sigcontext __user *sc)
 {
 	struct task_struct *tsk = current;
 
-	if (!(current_cpu_data.flags & CPU_HAS_FPU))
+	if (!(boot_cpu_data.flags & CPU_HAS_FPU))
 		return 0;
 
 	set_used_math();
@@ -158,7 +158,7 @@ static inline int save_sigcontext_fpu(struct sigcontext __user *sc,
 {
 	struct task_struct *tsk = current;
 
-	if (!(current_cpu_data.flags & CPU_HAS_FPU))
+	if (!(boot_cpu_data.flags & CPU_HAS_FPU))
 		return 0;
 
 	if (!used_math()) {
@@ -199,7 +199,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p
 #undef COPY
 
 #ifdef CONFIG_SH_FPU
-	if (current_cpu_data.flags & CPU_HAS_FPU) {
+	if (boot_cpu_data.flags & CPU_HAS_FPU) {
 		int owned_fp;
 		struct task_struct *tsk = current;
 
-- 
cgit v1.2.3


From 2908df9e2ce85e4de19ba81ac619acdf93a8bfaa Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 14 Oct 2009 14:13:41 +0900
Subject: sh: Tidy up SMP cpuinfo.

Trivial change for cleaning up the cpuinfo pretty printing on SMP, adds a
newline between CPUs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/setup.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index f9d44f8e0df6..99b4fb553bf1 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -549,6 +549,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 	if (cpu == 0)
 		seq_printf(m, "machine\t\t: %s\n", get_system_type());
+	else
+		seq_printf(m, "\n");
 
 	seq_printf(m, "processor\t: %d\n", cpu);
 	seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
-- 
cgit v1.2.3


From a66c2edea56c291a6f6a52f07496ebb97c0880e8 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 14 Oct 2009 14:14:30 +0900
Subject: sh: Populate initial secondary CPU info from boot_cpu_data.

The secondary CPU info was seeing corrupted results due to not entering
all of the setup paths taken by the boot CPU. So we just memcpy() the
boot cpu data over directly, and then fix up the per-CPU bits.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/smp.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 442d8d47a41e..160db1003cfb 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -35,6 +35,8 @@ static inline void __init smp_store_cpu_info(unsigned int cpu)
 {
 	struct sh_cpuinfo *c = cpu_data + cpu;
 
+	memcpy(c, &boot_cpu_data, sizeof(struct sh_cpuinfo));
+
 	c->loops_per_jiffy = loops_per_jiffy;
 }
 
-- 
cgit v1.2.3


From 4d2947f7c69f812f09ff0e5cdc98dfa5317a4d81 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 14 Oct 2009 14:21:40 +0900
Subject: sh: Optimize the setup_rt_frame() I-cache flush.

This only needs to flush the return code via the legacy path, and just
invalidates uselessly otherwise. This makes the behaviour consistent for
all of the trampoline setup paths.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/signal_32.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index 55d1f814e343..3db37425210d 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -472,6 +472,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		err |= __put_user(OR_R0_R0, &frame->retcode[6]);
 		err |= __put_user((__NR_rt_sigreturn), &frame->retcode[7]);
 		regs->pr = (unsigned long) frame->retcode;
+		flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
 	}
 
 	if (err)
@@ -497,8 +498,6 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
 		 current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
 
-	flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
-
 	return 0;
 
 give_sigsegv:
-- 
cgit v1.2.3


From 457b646189e47f9d48588809da3e806ec363f219 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 14 Oct 2009 15:50:28 +0900
Subject: sh: Fix a TRACE_IRQS_OFF typo.

The resume_userspace path had TRACE_IRQS_OFF written incorrectly and so
never handled the transition properly. This was fixed once before but
seems to have made it back in the tree. Fix it for good.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/entry-common.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 68d9223b145e..3eb84931d2aa 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -121,7 +121,7 @@ noresched:
 ENTRY(resume_userspace)
 	! r8: current_thread_info
 	cli
-	TRACE_IRQS_OfF
+	TRACE_IRQS_OFF
 	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
 	tst	#(_TIF_WORK_MASK & 0xff), r0
 	bt/s	__restore_all
-- 
cgit v1.2.3


From a7a7c0e1d12bcfb4a96cae439951232b08c91841 Mon Sep 17 00:00:00 2001
From: Valentin Sitdikov <valentin.sitdikov@siemens.com>
Date: Fri, 16 Oct 2009 14:15:38 +0900
Subject: sh: Fix up single page flushing to use PAGE_SIZE.

Presently The SH-4 cache flushing code uses flush_cache_4096() for most
of the real flushing work, which breaks down to a fixed 4096 unroll and
increment. Not only is this sub-optimal for larger page sizes, it's also
uncovered a bug in sh4_flush_dcache_page() when large page sizes are used
and we have no cache aliases -- resulting in only a part of the page's
D-cache lines being written back.

Signed-off-by: Valentin Sitdikov <valentin.sitdikov@siemens.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh4.c | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index a98c7d8984fa..519e2d16cd06 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -26,7 +26,7 @@
 #define MAX_DCACHE_PAGES	64	/* XXX: Tune for ways */
 #define MAX_ICACHE_PAGES	32
 
-static void __flush_cache_4096(unsigned long addr, unsigned long phys,
+static void __flush_cache_one(unsigned long addr, unsigned long phys,
 			       unsigned long exec_offset);
 
 /*
@@ -89,8 +89,7 @@ static void __uses_jump_to_uncached sh4_flush_icache_range(void *args)
 	local_irq_restore(flags);
 }
 
-static inline void flush_cache_4096(unsigned long start,
-				    unsigned long phys)
+static inline void flush_cache_one(unsigned long start, unsigned long phys)
 {
 	unsigned long flags, exec_offset = 0;
 
@@ -103,8 +102,7 @@ static inline void flush_cache_4096(unsigned long start,
 		exec_offset = 0x20000000;
 
 	local_irq_save(flags);
-	__flush_cache_4096(start | SH_CACHE_ASSOC,
-			   P1SEGADDR(phys), exec_offset);
+	__flush_cache_one(start | SH_CACHE_ASSOC, P1SEGADDR(phys), exec_offset);
 	local_irq_restore(flags);
 }
 
@@ -129,8 +127,8 @@ static void sh4_flush_dcache_page(void *arg)
 
 		/* Loop all the D-cache */
 		n = boot_cpu_data.dcache.n_aliases;
-		for (i = 0; i < n; i++, addr += 4096)
-			flush_cache_4096(addr, phys);
+		for (i = 0; i < n; i++, addr += PAGE_SIZE)
+			flush_cache_one(addr, phys);
 	}
 
 	wmb();
@@ -318,11 +316,11 @@ static void sh4_flush_cache_page(void *args)
 	/* We only need to flush D-cache when we have alias */
 	if ((address^phys) & alias_mask) {
 		/* Loop 4K of the D-cache */
-		flush_cache_4096(
+		flush_cache_one(
 			CACHE_OC_ADDRESS_ARRAY | (address & alias_mask),
 			phys);
 		/* Loop another 4K of the D-cache */
-		flush_cache_4096(
+		flush_cache_one(
 			CACHE_OC_ADDRESS_ARRAY | (phys & alias_mask),
 			phys);
 	}
@@ -337,7 +335,7 @@ static void sh4_flush_cache_page(void *args)
 		 * kernel has never executed the code through its identity
 		 * translation.
 		 */
-		flush_cache_4096(
+		flush_cache_one(
 			CACHE_IC_ADDRESS_ARRAY | (address & alias_mask),
 			phys);
 	}
@@ -393,7 +391,7 @@ static void sh4_flush_cache_range(void *args)
 }
 
 /**
- * __flush_cache_4096
+ * __flush_cache_one
  *
  * @addr:  address in memory mapped cache array
  * @phys:  P1 address to flush (has to match tags if addr has 'A' bit
@@ -406,7 +404,7 @@ static void sh4_flush_cache_range(void *args)
  * operation (purge/write-back) is selected by the lower 2 bits of
  * 'phys'.
  */
-static void __flush_cache_4096(unsigned long addr, unsigned long phys,
+static void __flush_cache_one(unsigned long addr, unsigned long phys,
 			       unsigned long exec_offset)
 {
 	int way_count;
-- 
cgit v1.2.3


From 5fb80ae8bd7549034845ebfba694d483070b768b Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Fri, 16 Oct 2009 14:38:48 +0900
Subject: sh: disabled cache handling fix.

Add code to handle the cache disabled case. Fixes breakage introduced by
37443ef3f0406e855e169c87ae3f4ffb4b6ff635 ("sh: Migrate SH-4 cacheflush
ops to function pointers."). Without this patch configuring caches off
with CONFIG_CACHE_OFF=y makes kfr2r09 and migo-r lock up in fbdev
deferred io or early user space.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index 5e1091be9dc4..a2dc7f9ecc51 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -265,6 +265,8 @@ static void __init emit_cache_params(void)
 
 void __init cpu_cache_init(void)
 {
+	unsigned int cache_disabled = !(__raw_readl(CCR) & CCR_CACHE_ENABLE);
+
 	compute_alias(&boot_cpu_data.icache);
 	compute_alias(&boot_cpu_data.dcache);
 	compute_alias(&boot_cpu_data.scache);
@@ -273,6 +275,13 @@ void __init cpu_cache_init(void)
 	__flush_purge_region		= noop__flush_region;
 	__flush_invalidate_region	= noop__flush_region;
 
+	/*
+	 * No flushing is necessary in the disabled cache case so we can
+	 * just keep the noop functions in local_flush_..() and __flush_..()
+	 */
+	if (unlikely(cache_disabled))
+		goto skip;
+
 	if (boot_cpu_data.family == CPU_FAMILY_SH2) {
 		extern void __weak sh2_cache_init(void);
 
@@ -312,5 +321,6 @@ void __init cpu_cache_init(void)
 		sh5_cache_init();
 	}
 
+skip:
 	emit_cache_params();
 }
-- 
cgit v1.2.3


From 52a94909f00e0ffceeac202e517a126d57c1c523 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Fri, 16 Oct 2009 14:42:33 +0900
Subject: sh: Remove BKL from landisk gio.

The open function got the BKL via the big push down. Replace it by
preempt_enable/disable as this is sufficient for an UP machine.

The ioctl can be unlocked because there is no functionality which
requires serialization. The usage by multiple callers is broken with
and without the BKL due to the local static variable addr.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-landisk/gio.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c
index 25cdf7358000..528013188196 100644
--- a/arch/sh/boards/mach-landisk/gio.c
+++ b/arch/sh/boards/mach-landisk/gio.c
@@ -14,7 +14,6 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <linux/kdev_t.h>
 #include <linux/cdev.h>
 #include <linux/fs.h>
@@ -35,7 +34,7 @@ static int gio_open(struct inode *inode, struct file *filp)
 	int minor;
 	int ret = -ENOENT;
 
-	lock_kernel();
+	preempt_disable();
 	minor = MINOR(inode->i_rdev);
 	if (minor < DEVCOUNT) {
 		if (openCnt > 0) {
@@ -45,7 +44,7 @@ static int gio_open(struct inode *inode, struct file *filp)
 			ret = 0;
 		}
 	}
-	unlock_kernel();
+	preempt_enable();
 	return ret;
 }
 
@@ -60,8 +59,7 @@ static int gio_close(struct inode *inode, struct file *filp)
 	return 0;
 }
 
-static int gio_ioctl(struct inode *inode, struct file *filp,
-			     unsigned int cmd, unsigned long arg)
+static long gio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	unsigned int data;
 	static unsigned int addr = 0;
@@ -129,7 +127,7 @@ static const struct file_operations gio_fops = {
 	.owner = THIS_MODULE,
 	.open = gio_open,	/* open */
 	.release = gio_close,	/* release */
-	.ioctl = gio_ioctl,	/* ioctl */
+	.unlocked_ioctl = gio_ioctl,
 };
 
 static int __init gio_init(void)
-- 
cgit v1.2.3


From f875295c4bfb39e96d136edd8ac80567e73536b4 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 16 Oct 2009 18:14:19 +0900
Subject: sh: Kill off stray HAVE_FTRACE_SYSCALLS reference.

This seems to have popped back in via some merge damage. Kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index b940424f8ccc..0dc7e3cbeffa 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -37,7 +37,6 @@ config SUPERH32
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
-	select HAVE_FTRACE_SYSCALLS
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_ARCH_KGDB
 	select ARCH_HIBERNATION_POSSIBLE if MMU
-- 
cgit v1.2.3


From ba93483f8c997f1a3fc0a6677f41e8556ae3eba6 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 26 Oct 2009 09:58:31 +0900
Subject: sh: __irq_entry annotate do_IRQ().

This adds an __irq_entry annotation for do_IRQ() so that the IRQ
annotation in the function graph tracer works as advertized. We already
have the IRQENTRY section wired up, so this is just a trivial addition
to actually make use of it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/irq.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 7cb933ba4957..eac7da772fc2 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/kernel_stat.h>
 #include <linux/seq_file.h>
+#include <linux/ftrace.h>
 #include <asm/processor.h>
 #include <asm/machvec.h>
 #include <asm/uaccess.h>
@@ -106,7 +107,7 @@ static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
 static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
 #endif
 
-asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)
+asmlinkage __irq_entry int do_IRQ(unsigned int irq, struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 #ifdef CONFIG_IRQSTACKS
-- 
cgit v1.2.3


From 26fadd3672964596d33548490b9756014ae0f414 Mon Sep 17 00:00:00 2001
From: Lubomir Rintel <lkundrak@v3.sk>
Date: Thu, 22 Oct 2009 11:58:37 +0000
Subject: sh: Build fix: define more __movmem* symbols

ERROR: "__movmemSI12" [net/unix/unix.ko] undefined!
ERROR: "__movmemSI52" [net/ipv6/sit.ko] undefined!
ERROR: "__movmemSI24" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI60" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI16" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI20" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI32" [net/ipv6/ipv6.ko] undefined!

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/sh_ksyms_32.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 86c270428357..444cce3ae921 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -85,6 +85,20 @@ DECLARE_EXPORT(__movstr_i4_even);
 DECLARE_EXPORT(__movstr_i4_odd);
 DECLARE_EXPORT(__movstrSI12_i4);
 DECLARE_EXPORT(__movmem);
+DECLARE_EXPORT(__movmemSI8);
+DECLARE_EXPORT(__movmemSI12);
+DECLARE_EXPORT(__movmemSI16);
+DECLARE_EXPORT(__movmemSI20);
+DECLARE_EXPORT(__movmemSI24);
+DECLARE_EXPORT(__movmemSI28);
+DECLARE_EXPORT(__movmemSI32);
+DECLARE_EXPORT(__movmemSI36);
+DECLARE_EXPORT(__movmemSI40);
+DECLARE_EXPORT(__movmemSI44);
+DECLARE_EXPORT(__movmemSI48);
+DECLARE_EXPORT(__movmemSI52);
+DECLARE_EXPORT(__movmemSI56);
+DECLARE_EXPORT(__movmemSI60);
 DECLARE_EXPORT(__movmem_i4_even);
 DECLARE_EXPORT(__movmem_i4_odd);
 DECLARE_EXPORT(__movmemSI12_i4);
-- 
cgit v1.2.3


From 60339fad5c68c9c533cd14e67194ff8f727c41d9 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sat, 24 Oct 2009 18:56:57 +0000
Subject: sh: Check for return_to_handler when unwinding the stack

When CONFIG_FUNCTION_GRAPH_TRACER is enabled the function graph tracer
may patch return addresses on the stack with the address of
return_to_handler(). This really confuses the DWARF unwinder because it
will try find the caller of return_to_handler(), not the caller of the
real return address.

So teach the DWARF unwinder how to find the real return address whenever
it encounters return_to_handler().

This patch does not cope very well when multiple return addresses on the
stack have been patched. To make it work properly it would require state
to track how many return_to_handler()'s have been seen so that we'd know
where to look in current->curr_ret_stack[]. So for now, instead of
trying to handle this, just moan if more than one return address on the
stack has been patched.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/dwarf.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 03b3616c80a5..2d07084e4882 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -20,6 +20,7 @@
 #include <linux/list.h>
 #include <linux/mempool.h>
 #include <linux/mm.h>
+#include <linux/ftrace.h>
 #include <asm/dwarf.h>
 #include <asm/unwinder.h>
 #include <asm/sections.h>
@@ -557,6 +558,27 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc,
 	if (!pc && !prev)
 		pc = (unsigned long)current_text_addr();
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	/*
+	 * If our stack has been patched by the function graph tracer
+	 * then we might see the address of return_to_handler() where we
+	 * expected to find the real return address.
+	 */
+	if (pc == (unsigned long)&return_to_handler) {
+		int index = current->curr_ret_stack;
+
+		/*
+		 * We currently have no way of tracking how many
+		 * return_to_handler()'s we've seen. If there is more
+		 * than one patched return address on our stack,
+		 * complain loudly.
+		 */
+		WARN_ON(index > 0);
+
+		pc = current->ret_stack[index].ret;
+	}
+#endif
+
 	frame = mempool_alloc(dwarf_frame_pool, GFP_ATOMIC);
 	if (!frame) {
 		printk(KERN_ERR "Unable to allocate a dwarf frame\n");
-- 
cgit v1.2.3


From 88345411df1eb5a24272955a53856e001f960a06 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 26 Oct 2009 10:08:55 +0000
Subject: sh: rsk7203 CONFIG_MTD=n fix

Fix the rsk7203 board code to build with CONFIG_MTD=n.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-rsk/devices-rsk7203.c |  4 ----
 arch/sh/boards/mach-rsk/setup.c           | 23 ++++++++++++++---------
 2 files changed, 14 insertions(+), 13 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
index 4af3a771c058..c37617e63220 100644
--- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
+++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -11,10 +11,6 @@
 #include <linux/types.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/map.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c
index af64d030a5c7..a5c0df785bfe 100644
--- a/arch/sh/boards/mach-rsk/setup.c
+++ b/arch/sh/boards/mach-rsk/setup.c
@@ -15,14 +15,12 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#ifdef CONFIG_MTD
 #include <linux/mtd/map.h>
+#endif
 #include <asm/machvec.h>
 #include <asm/io.h>
 
-static const char *probes[] = { "cmdlinepart", NULL };
-
-static struct mtd_partition *parsed_partitions;
-
 static struct mtd_partition rsk_partitions[] = {
 	{
 		.name		= "Bootloader",
@@ -41,6 +39,8 @@ static struct mtd_partition rsk_partitions[] = {
 };
 
 static struct physmap_flash_data flash_data = {
+	.parts		= rsk_partitions,
+	.nr_parts	= ARRAY_SIZE(rsk_partitions),
 	.width		= 2,
 };
 
@@ -60,7 +60,8 @@ static struct platform_device flash_device = {
 	},
 };
 
-static struct mtd_info *flash_mtd;
+#ifdef CONFIG_MTD
+static const char *probes[] = { "cmdlinepart", NULL };
 
 static struct map_info rsk_flash_map = {
 	.name		= "RSK+ Flash",
@@ -68,6 +69,10 @@ static struct map_info rsk_flash_map = {
 	.bankwidth	= 2,
 };
 
+static struct mtd_info *flash_mtd;
+
+static struct mtd_partition *parsed_partitions;
+
 static void __init set_mtd_partitions(void)
 {
 	int nr_parts = 0;
@@ -77,14 +82,14 @@ static void __init set_mtd_partitions(void)
 	nr_parts = parse_mtd_partitions(flash_mtd, probes,
 					&parsed_partitions, 0);
 	/* If there is no partition table, used the hard coded table */
-	if (nr_parts <= 0) {
-		flash_data.parts = rsk_partitions;
-		flash_data.nr_parts = ARRAY_SIZE(rsk_partitions);
-	} else {
+	if (nr_parts > 0) {
 		flash_data.nr_parts = nr_parts;
 		flash_data.parts = parsed_partitions;
 	}
 }
+#else
+static inline void set_mtd_partitions(void) {}
+#endif
 
 static struct platform_device *rsk_devices[] __initdata = {
 	&flash_device,
-- 
cgit v1.2.3


From 9e24c7e2ac269486ab7c69ce50e944698e818fac Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 26 Oct 2009 10:12:39 +0000
Subject: sh: add uImage.bin target

Add an uImage.bin target to allow uncompressed uImages.
Useful for boards with busted u-boot decompression like
the rsk7203 on my desk.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Makefile      | 2 +-
 arch/sh/boot/Makefile | 6 +++++-
 2 files changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index fc51a918b31a..9ab99fe7be55 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -199,7 +199,7 @@ endif
 libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
 libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
 
-BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec \
+BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec uImage.bin \
 	       zImage vmlinux.srec romImage
 PHONY += maketools $(BOOT_TARGETS) FORCE
 
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index a1316872be6f..cb8cf5572e79 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -20,11 +20,12 @@ CONFIG_BOOT_LINK_OFFSET	?= 0x00800000
 CONFIG_ZERO_PAGE_OFFSET	?= 0x00001000
 CONFIG_ENTRY_OFFSET	?= 0x00001000
 
+suffix-y := bin
 suffix-$(CONFIG_KERNEL_GZIP)  := gz
 suffix-$(CONFIG_KERNEL_BZIP2) := bz2
 suffix-$(CONFIG_KERNEL_LZMA)  := lzma
 
-targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma
+targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma uImage.bin
 extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
 subdir- := compressed romimage
 
@@ -88,6 +89,9 @@ $(obj)/uImage.gz: $(obj)/vmlinux.bin.gz
 $(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma
 	$(call if_changed,uimage,lzma)
 
+$(obj)/uImage.bin: $(obj)/vmlinux.bin
+	$(call if_changed,uimage,none)
+
 OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec
 $(obj)/vmlinux.srec: $(obj)/compressed/vmlinux
 	$(call if_changed,objcopy)
-- 
cgit v1.2.3


From a5c461bb3f74646d99464652cd5363e88434c3e1 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 27 Oct 2009 07:17:12 +0900
Subject: sh: Document uImage.bin target in archhelp.

This was missing from the previous patch.

Reported-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Makefile | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/sh')

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 9ab99fe7be55..66e40aabc600 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -225,6 +225,7 @@ define archhelp
 	@echo '  vmlinux.srec	           - Create an ELF S-record'
 	@echo '* uImage  	           - Alias to bootable U-Boot image'
 	@echo '  uImage.srec	           - Create an S-record for U-Boot'
+	@echo '  uImage.bin	           - Kernel-only image for U-Boot (bin)'
 	@echo '* uImage.gz	           - Kernel-only image for U-Boot (gzip)'
 	@echo '  uImage.bz2	           - Kernel-only image for U-Boot (bzip2)'
 	@echo '  uImage.lzma	           - Kernel-only image for U-Boot (lzma)'
-- 
cgit v1.2.3


From ffb4a73d8906f71910e6c83ec2b499e70025ee8e Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 27 Oct 2009 07:22:37 +0900
Subject: sh: Fix hugetlbfs dependencies for SH-3 && MMU configurations.

The hugetlb dependencies presently depend on SUPERH && MMU while the
hugetlb page size definitions depend on CPU_SH4 or CPU_SH5. This
unfortunately allows SH-3 + MMU configurations to enable hugetlbfs
without a corresponding HPAGE_SHIFT definition, resulting in the build
blowing up.

As SH-3 doesn't support variable page sizes, we tighten up the
dependenies a bit to prevent hugetlbfs from being enabled. These days
we also have a shiny new SYS_SUPPORTS_HUGETLBFS, so switch to using
that rather than adding to the list of corner cases in fs/Kconfig.

Reported-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig    | 5 +++++
 arch/sh/mm/Kconfig | 2 +-
 2 files changed, 6 insertions(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 0dc7e3cbeffa..88cdeb9f72d9 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -121,6 +121,9 @@ config SYS_SUPPORTS_APM_EMULATION
 	bool
 	select ARCH_SUSPEND_POSSIBLE
 
+config SYS_SUPPORTS_HUGETLBFS
+	bool
+
 config SYS_SUPPORTS_SMP
 	bool
 
@@ -195,6 +198,7 @@ config CPU_SH4
 	select CPU_HAS_SR_RB
 	select CPU_HAS_FPU if !CPU_SH4AL_DSP
 	select SYS_SUPPORTS_TMU
+	select SYS_SUPPORTS_HUGETLBFS if MMU
 
 config CPU_SH4A
 	bool
@@ -209,6 +213,7 @@ config CPU_SH5
 	bool
 	select CPU_HAS_FPU
 	select SYS_SUPPORTS_TMU
+	select SYS_SUPPORTS_HUGETLBFS if MMU
 
 config CPU_SHX2
 	bool
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 64dc1ad59801..7f7b52f9beba 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -227,7 +227,7 @@ endchoice
 
 choice
 	prompt "HugeTLB page size"
-	depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU
+	depends on HUGETLB_PAGE
 	default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB
 	default HUGETLB_PAGE_SIZE_64K
 
-- 
cgit v1.2.3


From 421b541110b20ccff1a7ff3245439cb24efe9812 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 6 Nov 2009 17:23:33 +0900
Subject: sh: unwinder: Fix up invalid PC refetch in dwarf unwinder.

The dwarf unwinder presently attempts to provide a sane PC value if none
is provided, however the logic is broken and cases where a previous valid
dwarf frame exists along with a bogus PC value can still proceed. This
fixes up the test and prevents the unwinder from blowing up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/dwarf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 2d07084e4882..d76a23170dbb 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -555,7 +555,7 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc,
 	 * NOTE: the return address is guaranteed to be setup by the
 	 * time this function makes its first function call.
 	 */
-	if (!pc && !prev)
+	if (!pc || !prev)
 		pc = (unsigned long)current_text_addr();
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-- 
cgit v1.2.3


From a9d244a2ff163247b607c4bb64803230ca8f8acb Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Thu, 5 Nov 2009 23:14:39 +0000
Subject: sh: Account for cache aliases in flush_icache_range()

The icache may also contain aliases so we must account for them just
like we do when manipulating the dcache. We usually get away with
aliases in the icache because the instructions that are read from memory
are read-only, i.e. they never change. However, the place where this
bites us is when the code has been modified.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh4.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 519e2d16cd06..b7f235c74d66 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -72,6 +72,7 @@ static void __uses_jump_to_uncached sh4_flush_icache_range(void *args)
 
 	for (v = start; v < end; v += L1_CACHE_BYTES) {
 		unsigned long icacheaddr;
+		int j, n;
 
 		__ocbwb(v);
 
@@ -79,8 +80,10 @@ static void __uses_jump_to_uncached sh4_flush_icache_range(void *args)
 				cpu_data->icache.entry_mask);
 
 		/* Clear i-cache line valid-bit */
+		n = boot_cpu_data.icache.n_aliases;
 		for (i = 0; i < cpu_data->icache.ways; i++) {
-			__raw_writel(0, icacheaddr);
+			for (j = 0; j < n; j++)
+				__raw_writel(0, icacheaddr + (j * PAGE_SIZE));
 			icacheaddr += cpu_data->icache.way_incr;
 		}
 	}
-- 
cgit v1.2.3


From 969e46a8533a3e40ce2146f6764a963b1f5505da Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Fri, 6 Nov 2009 22:42:05 +0000
Subject: sh: Replace old style lock initializer

SPIN_LOCK_UNLOCKED is deprecated. Use __SPIN_LOCK_UNLOCKED instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/rwsem.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h
index 1987f3ea7f1b..06e2251a5e48 100644
--- a/arch/sh/include/asm/rwsem.h
+++ b/arch/sh/include/asm/rwsem.h
@@ -41,7 +41,7 @@ struct rw_semaphore {
 #endif
 
 #define __RWSEM_INITIALIZER(name) \
-	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+	{ RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
 	  LIST_HEAD_INIT((name).wait_list) \
 	  __RWSEM_DEP_MAP_INIT(name) }
 
-- 
cgit v1.2.3


From 648f15345add88a7eea724365fe1217a8d8a1e16 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 17 Nov 2009 22:50:45 +0000
Subject: sh: Fixup last users of irq_chip->typename

The typename member of struct irq_chip was kept for migration purposes
and is obsolete since more than 2 years. Fix up the leftovers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/irq/imask.c    | 2 +-
 arch/sh/kernel/cpu/irq/intc-sh5.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/cpu/irq/imask.c b/arch/sh/kernel/cpu/irq/imask.c
index 6b5d191eec3a..a351ed84eec5 100644
--- a/arch/sh/kernel/cpu/irq/imask.c
+++ b/arch/sh/kernel/cpu/irq/imask.c
@@ -68,7 +68,7 @@ static void unmask_imask_irq(unsigned int irq)
 }
 
 static struct irq_chip imask_irq_chip = {
-	.typename	= "SR.IMASK",
+	.name		= "SR.IMASK",
 	.mask		= mask_imask_irq,
 	.unmask		= unmask_imask_irq,
 	.mask_ack	= mask_imask_irq,
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
index 6c092f1f5557..06e7e2959b54 100644
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -85,7 +85,7 @@ static void mask_and_ack_intc(unsigned int);
 static void end_intc_irq(unsigned int irq);
 
 static struct irq_chip intc_irq_type = {
-	.typename = "INTC",
+	.name = "INTC",
 	.startup = startup_intc_irq,
 	.shutdown = shutdown_intc_irq,
 	.enable = enable_intc_irq,
-- 
cgit v1.2.3