From 4705b2e8047221142af2ed5e37f54ac4c7f80a7d Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 18 May 2010 14:43:15 +0000 Subject: sh: add romImage MMCIF boot for sh7724 and Ecovec V2 This patch is V2 of the MMCIF romImage boot support for sh7724 and the Ecovec board. With this patch applied and CONFIG_ROMIMAGE_MMCIF selected the romImage kernel image can be written to a MMC card and booted directly by the sh7724 cpu. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/include/cpu-sh4/cpu/sh7724.h | 1 + arch/sh/include/mach-common/mach/romimage.h | 10 ++++++++++ arch/sh/include/mach-ecovec24/mach/romimage.h | 27 +++++++++++++++++++++++++++ arch/sh/include/mach-kfr2r09/mach/romimage.h | 10 ++++++++++ 4 files changed, 48 insertions(+) (limited to 'arch/sh/include') diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h index fbbf550cc529..4c27b68789b3 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7724.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h @@ -9,6 +9,7 @@ * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10] * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3] * MD8: Test Mode + * BOOT: FBR - Boot Mode (L: MMCIF, H: Area0) */ /* Pin Function Controller: diff --git a/arch/sh/include/mach-common/mach/romimage.h b/arch/sh/include/mach-common/mach/romimage.h index 267e24112d82..08fb42269ecd 100644 --- a/arch/sh/include/mach-common/mach/romimage.h +++ b/arch/sh/include/mach-common/mach/romimage.h @@ -1 +1,11 @@ +#ifdef __ASSEMBLY__ + /* do nothing here by default */ + +#else /* __ASSEMBLY__ */ + +extern inline void mmcif_update_progress(int nr) +{ +} + +#endif /* __ASSEMBLY__ */ diff --git a/arch/sh/include/mach-ecovec24/mach/romimage.h b/arch/sh/include/mach-ecovec24/mach/romimage.h index 1c8787ecb1c1..1dcf5e6c8d83 100644 --- a/arch/sh/include/mach-ecovec24/mach/romimage.h +++ b/arch/sh/include/mach-ecovec24/mach/romimage.h @@ -1,3 +1,5 @@ +#ifdef __ASSEMBLY__ + /* EcoVec board specific boot code: * converts the "partner-jet-script.txt" script into assembly * the assembly code is the first code to be executed in the romImage @@ -18,3 +20,28 @@ .align 2 1 : .long 0xa8000000 2 : + +#else /* __ASSEMBLY__ */ + +/* Ecovec board specific information: + * + * Set the following to enable MMCIF boot from the MMC card in CN12: + * + * DS1.5 = OFF (SH BOOT pin set to L) + * DS2.6 = OFF (Select MMCIF on CN12 instead of SDHI1) + * DS2.7 = ON (Select MMCIF on CN12 instead of SDHI1) + * + */ +#define HIZCRA 0xa4050158 +#define PGDR 0xa405012c + +extern inline void mmcif_update_progress(int nr) +{ + /* disable Hi-Z for LED pins */ + __raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA); + + /* update progress on LED4, LED5, LED6 and LED7 */ + __raw_writeb(1 << (nr - 1), PGDR); +} + +#endif /* __ASSEMBLY__ */ diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h index a110823f2bde..976256a323f2 100644 --- a/arch/sh/include/mach-kfr2r09/mach/romimage.h +++ b/arch/sh/include/mach-kfr2r09/mach/romimage.h @@ -1,3 +1,5 @@ +#ifdef __ASSEMBLY__ + /* kfr2r09 board specific boot code: * converts the "partner-jet-script.txt" script into assembly * the assembly code is the first code to be executed in the romImage @@ -18,3 +20,11 @@ .align 2 1: .long 0xa8000000 2: + +#else /* __ASSEMBLY__ */ + +extern inline void mmcif_update_progress(int nr) +{ +} + +#endif /* __ASSEMBLY__ */ -- cgit v1.2.3 From 86e4dd5add77ab809f5427391dfabb8f78cbcb58 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 25 May 2010 20:06:13 +0900 Subject: sh: support for platforms without PIO. This extends some of the existing special casing for HAS_IOPORT platforms and gets it to the point where platforms can begin to conditionally select it. The major changes here are that the PIO routines themselves go away completely, including all of the machvec port mapping wrappers. With this in place it's possible for any non-machvec abusing platform to disable PIO completely. At present this is left as an opt-in until the abusers are the odd ones out instead of the majority. Signed-off-by: Paul Mundt --- arch/sh/include/asm/io.h | 8 ++++++++ arch/sh/include/asm/machvec.h | 9 +++++---- 2 files changed, 13 insertions(+), 4 deletions(-) (limited to 'arch/sh/include') diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h index f689554e17c1..b237d525d592 100644 --- a/arch/sh/include/asm/io.h +++ b/arch/sh/include/asm/io.h @@ -39,6 +39,8 @@ #include #include +#ifdef CONFIG_HAS_IOPORT + #define inb(p) sh_mv.mv_inb((p)) #define inw(p) sh_mv.mv_inw((p)) #define inl(p) sh_mv.mv_inl((p)) @@ -60,6 +62,8 @@ #define outsw(p,b,c) sh_mv.mv_outsw((p), (b), (c)) #define outsl(p,b,c) sh_mv.mv_outsl((p), (b), (c)) +#endif + #define __raw_writeb(v,a) (__chk_io_ptr(a), *(volatile u8 __force *)(a) = (v)) #define __raw_writew(v,a) (__chk_io_ptr(a), *(volatile u16 __force *)(a) = (v)) #define __raw_writel(v,a) (__chk_io_ptr(a), *(volatile u32 __force *)(a) = (v)) @@ -240,6 +244,8 @@ __BUILD_MEMORY_STRING(q, u64) #define IO_SPACE_LIMIT 0xffffffff +#ifdef CONFIG_HAS_IOPORT + /* * This function provides a method for the generic case where a * board-specific ioport_map simply needs to return the port + some @@ -255,6 +261,8 @@ static inline void __set_io_port_base(unsigned long pbase) #define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n)) +#endif + /* We really want to try and get these to memcpy etc */ void memcpy_fromio(void *, const volatile void __iomem *, unsigned long); void memcpy_toio(volatile void __iomem *, const void *, unsigned long); diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h index bc0218cb72e1..a0b0cf79cf8a 100644 --- a/arch/sh/include/asm/machvec.h +++ b/arch/sh/include/asm/machvec.h @@ -19,6 +19,10 @@ struct sh_machine_vector { const char *mv_name; int mv_nr_irqs; + int (*mv_irq_demux)(int irq); + void (*mv_init_irq)(void); + +#ifdef CONFIG_HAS_IOPORT u8 (*mv_inb)(unsigned long); u16 (*mv_inw)(unsigned long); u32 (*mv_inl)(unsigned long); @@ -40,12 +44,9 @@ struct sh_machine_vector { void (*mv_outsw)(unsigned long, const void *src, unsigned long count); void (*mv_outsl)(unsigned long, const void *src, unsigned long count); - int (*mv_irq_demux)(int irq); - - void (*mv_init_irq)(void); - void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size); void (*mv_ioport_unmap)(void __iomem *); +#endif int (*mv_clk_init)(void); int (*mv_mode_pins)(void); -- cgit v1.2.3