From c9f11c30374329a0d2a88cf05281ca49d8eca9ab Mon Sep 17 00:00:00 2001 From: Jia Hongtao Date: Fri, 3 Aug 2012 18:14:09 +0800 Subject: powerpc/fsl-pci: Only scan PCI bus if configured as a host We change fsl_add_bridge to return -ENODEV if the controller is working in agent mode. Then check the return value of fsl_add_bridge to guarantee that only successfully added host bus will be scanned. Signed-off-by: Jia Hongtao Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_pci.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index a7b2a600d0a4..c37f46136321 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -465,7 +465,7 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) iounmap(hose->cfg_data); iounmap(hose->cfg_addr); pcibios_free_controller(hose); - return 0; + return -ENODEV; } setup_pci_cmd(hose); @@ -827,6 +827,7 @@ struct device_node *fsl_pci_primary; void __devinit fsl_pci_init(void) { + int ret; struct device_node *node; struct pci_controller *hose; dma_addr_t max = 0xffffffff; @@ -855,10 +856,12 @@ void __devinit fsl_pci_init(void) if (!fsl_pci_primary) fsl_pci_primary = node; - fsl_add_bridge(node, fsl_pci_primary == node); - hose = pci_find_hose_for_OF_device(node); - max = min(max, hose->dma_window_base_cur + - hose->dma_window_size); + ret = fsl_add_bridge(node, fsl_pci_primary == node); + if (ret == 0) { + hose = pci_find_hose_for_OF_device(node); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); + } } } -- cgit v1.2.3 From 8e90e4cc33ac44fd58635dc1aa94d3fd2145e518 Mon Sep 17 00:00:00 2001 From: Zhao Chenhui Date: Tue, 7 Aug 2012 17:12:47 +0800 Subject: powerpc/85xx: mpc85xx_defconfig - add VIA PATA support for MPC85xxCDS Signed-off-by: Zhao Chenhui Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc85xx_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 03ee911c4577..99a4dd3b30cc 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -115,6 +115,7 @@ CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_FSL=y CONFIG_PATA_ALI=y +CONFIG_PATA_VIA=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_FS_ENET=y -- cgit v1.2.3 From 09a3017a585eb8567a7de15b426bb1dfb548bf0f Mon Sep 17 00:00:00 2001 From: Shengzhou Liu Date: Fri, 10 Aug 2012 18:48:31 +0800 Subject: powerpc/p4080ds: dts - add usb controller version info and port0 Add the missing usb controller version info and port0, which is required during setup usb phy. Signed-off-by: Shengzhou Liu Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi index 8d35d2c1f694..4f9c9f682ecf 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -345,6 +345,13 @@ /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" + usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + port0; + }; /include/ "qoriq-usb2-dr-0.dtsi" + usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + }; /include/ "qoriq-sec4.0-0.dtsi" }; -- cgit v1.2.3 From 04f995a544d1289ffb8108849cd71b1325c5af6a Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 6 Aug 2012 00:03:28 +0000 Subject: KVM: PPC: Book3S HV: Fix incorrect branch in H_CEDE code In handling the H_CEDE hypercall, if this vcpu has already been prodded (with the H_PROD hypercall, which Linux guests don't in fact use), we branch to a numeric label '1f'. Unfortunately there is another '1:' label before the one that we want to jump to. This fixes the problem by using a textual label, 'kvm_cede_prodded'. It also changes the label for another longish branch from '2:' to 'kvm_cede_exit' to avoid a possible future problem if code modifications add another numeric '2:' label in between. Signed-off-by: Paul Mackerras Signed-off-by: Alexander Graf --- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 5a84c8d3d040..44b72feaff7d 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -1421,13 +1421,13 @@ _GLOBAL(kvmppc_h_cede) sync /* order setting ceded vs. testing prodded */ lbz r5,VCPU_PRODDED(r3) cmpwi r5,0 - bne 1f + bne kvm_cede_prodded li r0,0 /* set trap to 0 to say hcall is handled */ stw r0,VCPU_TRAP(r3) li r0,H_SUCCESS std r0,VCPU_GPR(R3)(r3) BEGIN_FTR_SECTION - b 2f /* just send it up to host on 970 */ + b kvm_cede_exit /* just send it up to host on 970 */ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206) /* @@ -1446,7 +1446,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206) or r4,r4,r0 PPC_POPCNTW(R7,R4) cmpw r7,r8 - bge 2f + bge kvm_cede_exit stwcx. r4,0,r6 bne 31b li r0,1 @@ -1555,7 +1555,8 @@ kvm_end_cede: b hcall_real_fallback /* cede when already previously prodded case */ -1: li r0,0 +kvm_cede_prodded: + li r0,0 stb r0,VCPU_PRODDED(r3) sync /* order testing prodded vs. clearing ceded */ stb r0,VCPU_CEDED(r3) @@ -1563,7 +1564,8 @@ kvm_end_cede: blr /* we've ceded but we want to give control to the host */ -2: li r3,H_TOO_HARD +kvm_cede_exit: + li r3,H_TOO_HARD blr secondary_too_late: -- cgit v1.2.3 From 249ba1ee0f8fcb4e40caa5fbea11dafde201cc46 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Fri, 3 Aug 2012 13:56:33 +0200 Subject: KVM: PPC: Add cache flush on page map When we map a page that wasn't icache cleared before, do so when first mapping it in KVM using the same information bits as the Linux mapping logic. That way we are 100% sure that any page we map does not have stale entries in the icache. Signed-off-by: Alexander Graf --- arch/powerpc/include/asm/kvm_host.h | 1 + arch/powerpc/include/asm/kvm_ppc.h | 12 ++++++++++++ arch/powerpc/kvm/book3s_32_mmu_host.c | 3 +++ arch/powerpc/kvm/book3s_64_mmu_host.c | 2 ++ arch/powerpc/kvm/e500_tlb.c | 3 +++ arch/powerpc/mm/mem.c | 1 + 6 files changed, 22 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h index 50ea12fd7bf5..a8bf5c673a3c 100644 --- a/arch/powerpc/include/asm/kvm_host.h +++ b/arch/powerpc/include/asm/kvm_host.h @@ -33,6 +33,7 @@ #include #include #include +#include #define KVM_MAX_VCPUS NR_CPUS #define KVM_MAX_VCORES NR_CPUS diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h index 0124937a23b9..e006f0bdea95 100644 --- a/arch/powerpc/include/asm/kvm_ppc.h +++ b/arch/powerpc/include/asm/kvm_ppc.h @@ -219,4 +219,16 @@ void kvmppc_claim_lpid(long lpid); void kvmppc_free_lpid(long lpid); void kvmppc_init_lpid(unsigned long nr_lpids); +static inline void kvmppc_mmu_flush_icache(pfn_t pfn) +{ + /* Clear i-cache for new pages */ + struct page *page; + page = pfn_to_page(pfn); + if (!test_bit(PG_arch_1, &page->flags)) { + flush_dcache_icache_page(page); + set_bit(PG_arch_1, &page->flags); + } +} + + #endif /* __POWERPC_KVM_PPC_H__ */ diff --git a/arch/powerpc/kvm/book3s_32_mmu_host.c b/arch/powerpc/kvm/book3s_32_mmu_host.c index f922c29bb234..837f13e7b6bf 100644 --- a/arch/powerpc/kvm/book3s_32_mmu_host.c +++ b/arch/powerpc/kvm/book3s_32_mmu_host.c @@ -211,6 +211,9 @@ next_pteg: pteg1 |= PP_RWRX; } + if (orig_pte->may_execute) + kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT); + local_irq_disable(); if (pteg[rr]) { diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c index 10fc8ec9d2a8..0688b6b39585 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_host.c +++ b/arch/powerpc/kvm/book3s_64_mmu_host.c @@ -126,6 +126,8 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte) if (!orig_pte->may_execute) rflags |= HPTE_R_N; + else + kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT); hash = hpt_hash(va, PTE_SIZE, MMU_SEGSIZE_256M); diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c index c510fc961302..fb3bb3ad8b3c 100644 --- a/arch/powerpc/kvm/e500_tlb.c +++ b/arch/powerpc/kvm/e500_tlb.c @@ -539,6 +539,9 @@ static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500, kvmppc_e500_setup_stlbe(&vcpu_e500->vcpu, gtlbe, tsize, ref, gvaddr, stlbe); + + /* Clear i-cache for new pages */ + kvmppc_mmu_flush_icache(pfn); } /* XXX only map the one-one case, for now use TLB0 */ diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index baaafde7d135..fbdad0e3929a 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -469,6 +469,7 @@ void flush_dcache_icache_page(struct page *page) __flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT); #endif } +EXPORT_SYMBOL(flush_dcache_icache_page); void clear_user_page(void *page, unsigned long vaddr, struct page *pg) { -- cgit v1.2.3 From e8143ccb6b501f78bb95d9c5ee100d18423008cf Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 14 Aug 2012 12:10:09 +0000 Subject: ppc: e500_tlb memset clears nothing Put the parameters the right way around Addresses https://bugzilla.kernel.org/show_bug.cgi?id=44031 Reported-by: David Binderman Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Alexander Graf --- arch/powerpc/kvm/e500_tlb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c index fb3bb3ad8b3c..a2b66717813d 100644 --- a/arch/powerpc/kvm/e500_tlb.c +++ b/arch/powerpc/kvm/e500_tlb.c @@ -322,11 +322,11 @@ static inline void kvmppc_e500_ref_release(struct tlbe_ref *ref) static void clear_tlb1_bitmap(struct kvmppc_vcpu_e500 *vcpu_e500) { if (vcpu_e500->g2h_tlb1_map) - memset(vcpu_e500->g2h_tlb1_map, - sizeof(u64) * vcpu_e500->gtlb_params[1].entries, 0); + memset(vcpu_e500->g2h_tlb1_map, 0, + sizeof(u64) * vcpu_e500->gtlb_params[1].entries); if (vcpu_e500->h2g_tlb1_rmap) - memset(vcpu_e500->h2g_tlb1_rmap, - sizeof(unsigned int) * host_tlb_params[1].entries, 0); + memset(vcpu_e500->h2g_tlb1_rmap, 0, + sizeof(unsigned int) * host_tlb_params[1].entries); } static void clear_tlb_privs(struct kvmppc_vcpu_e500 *vcpu_e500) -- cgit v1.2.3 From 823f74733d8f89eaabfb25f93680fb7e05861348 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 22 Aug 2012 13:43:24 -0500 Subject: powerpc/fsl: update defconfigs run make savedefconfig on fsl defconfigs. Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/configs/85xx/p1023rds_defconfig | 30 ++++++++------------------- arch/powerpc/configs/corenet32_smp_defconfig | 28 +++++++------------------ arch/powerpc/configs/mpc83xx_defconfig | 17 ++++----------- arch/powerpc/configs/mpc85xx_defconfig | 31 +++++++--------------------- arch/powerpc/configs/mpc85xx_smp_defconfig | 31 +++++++--------------------- 5 files changed, 35 insertions(+), 102 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023rds_defconfig index f4337bacd0e7..a79b0a9316a5 100644 --- a/arch/powerpc/configs/85xx/p1023rds_defconfig +++ b/arch/powerpc/configs/85xx/p1023rds_defconfig @@ -6,28 +6,27 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_EMBEDDED=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_P1023_RDS=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_CPM2=y -CONFIG_GPIO_MPC8XXX=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y @@ -67,7 +66,6 @@ CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -80,15 +78,14 @@ CONFIG_SATA_FSL=y CONFIG_SATA_SIL24=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y +CONFIG_FS_ENET=y +CONFIG_FSL_PQ_MDIO=y +CONFIG_E1000E=y CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y CONFIG_FIXED_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_FS_ENET=y -CONFIG_E1000E=y -CONFIG_FSL_PQ_MDIO=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set @@ -98,16 +95,15 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_QE=m -CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CPM=m CONFIG_I2C_MPC=y +CONFIG_GPIO_MPC8XXX=y # CONFIG_HWMON is not set CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_SOUND=y @@ -123,7 +119,6 @@ CONFIG_DMADEVICES=y CONFIG_FSL_DMA=y # CONFIG_NET_DMA is not set CONFIG_STAGING=y -# CONFIG_STAGING_EXCLUDE_BUILD is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set @@ -150,22 +145,15 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_FRAME_WARN=8092 CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index cbb98c1234fd..f085699dab7c 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -6,8 +6,8 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y -CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -21,23 +21,22 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_P2041_RDB=y CONFIG_P3041_DS=y CONFIG_P4080_DS=y CONFIG_P5020_DS=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=m CONFIG_KEXEC=y CONFIG_IRQ_ALL_CPUS=y CONFIG_FORCE_MAX_ZONEORDER=13 -CONFIG_FSL_LBC=y CONFIG_PCI=y CONFIG_PCIEPORTBUS=y -CONFIG_PCI_MSI=y # CONFIG_PCIEASPM is not set +CONFIG_PCI_MSI=y CONFIG_RAPIDIO=y CONFIG_FSL_RIO=y CONFIG_NET=y @@ -77,17 +76,14 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_FSL_IFC=y CONFIG_MTD_NAND_FSL_ELBC=y -CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND_FSL_IFC=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y @@ -115,11 +111,9 @@ CONFIG_SERIO_LIBPS2=y CONFIG_PPC_EPAPR_HV_BYTECHAN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y -CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -132,7 +126,6 @@ CONFIG_SPI_FSL_ESPI=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_USB_HID=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -142,8 +135,6 @@ CONFIG_USB_OHCI_HCD_PPC_OF_LE=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_OF=y -CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y @@ -170,19 +161,16 @@ CONFIG_HUGETLBFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=m CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_RCU_TRACE=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_MD4=y diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 5aac9a8bc53b..e116dc9e8a2e 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -2,12 +2,12 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y # CONFIG_PPC_CHRP is not set # CONFIG_PPC_PMAC is not set CONFIG_PPC_83xx=y @@ -25,7 +25,6 @@ CONFIG_ASP834x=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_MATH_EMULATION=y -CONFIG_SPARSE_IRQ=y CONFIG_PCI=y CONFIG_NET=y CONFIG_PACKET=y @@ -44,8 +43,6 @@ CONFIG_INET_ESP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y @@ -64,15 +61,14 @@ CONFIG_ATA=y CONFIG_SATA_FSL=y CONFIG_SATA_SIL=y CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_UCC_GETH=y +CONFIG_GIANFAR=y CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_VITESSE_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_FIXED_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_GIANFAR=y -CONFIG_UCC_GETH=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set @@ -112,17 +108,12 @@ CONFIG_RTC_DRV_DS1374=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_INOTIFY=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_CRC_T10DIF=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 99a4dd3b30cc..a036a622be5a 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -5,7 +5,9 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -17,6 +19,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_MPC8540_ADS=y CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y @@ -40,8 +44,6 @@ CONFIG_SBC8548=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_FORCE_MAX_ZONEORDER=12 @@ -78,32 +80,20 @@ CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y CONFIG_FTL=y -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_MTD_NAND_FSL_IFC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -135,7 +125,6 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y @@ -184,7 +173,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -230,18 +218,13 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_DEBUG_FS=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index fdfa84dc908f..4ba5255232bc 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -7,7 +7,9 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -19,6 +21,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_MPC8540_ADS=y CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y @@ -42,8 +46,6 @@ CONFIG_SBC8548=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_IRQ_ALL_CPUS=y @@ -81,32 +83,20 @@ CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y CONFIG_FTL=y -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_MTD_NAND_FSL_IFC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -137,7 +127,6 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y @@ -186,7 +175,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -232,18 +220,13 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_DEBUG_FS=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y -- cgit v1.2.3 From 1267643dc311e860e728dbd09a97c2e0a773bfdb Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 22 Aug 2012 13:43:30 -0500 Subject: powerpc/fsl: fix "Failed to mount /dev: No such device" errors Yocto (Built by Poky 7.0) 1.2 root filesystems fail to boot, at least over nfs, with: Failed to mount /dev: No such device Configuring DEVTMPFS fixes it. Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/configs/85xx/p1023rds_defconfig | 1 + arch/powerpc/configs/corenet32_smp_defconfig | 1 + arch/powerpc/configs/corenet64_smp_defconfig | 1 + arch/powerpc/configs/mpc83xx_defconfig | 1 + arch/powerpc/configs/mpc85xx_defconfig | 1 + arch/powerpc/configs/mpc85xx_smp_defconfig | 1 + 6 files changed, 6 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023rds_defconfig index a79b0a9316a5..26e541c4662b 100644 --- a/arch/powerpc/configs/85xx/p1023rds_defconfig +++ b/arch/powerpc/configs/85xx/p1023rds_defconfig @@ -62,6 +62,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index f085699dab7c..8b3d57c1ebe8 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -69,6 +69,7 @@ CONFIG_INET_IPCOMP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index dd89de8b0b7f..0516e22ca3de 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -56,6 +56,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index e116dc9e8a2e..9352e4430c3b 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -41,6 +41,7 @@ CONFIG_INET_ESP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FW_LOADER is not set CONFIG_MTD=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index a036a622be5a..8b5bda27d248 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -76,6 +76,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 4ba5255232bc..b0974e7e98ae 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -79,6 +79,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y -- cgit v1.2.3 From ca5dd3954a62dc14c2afff1c34b3b5d8dc74f777 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 23 Aug 2012 22:09:12 +0000 Subject: powerpc: Fix xmon dl command for new printk implementation Since the printk internals were reworked the xmon 'dl' command which dumps the content of __log_buf has stopped working. It is now a structured buffer, so just dumping it doesn't really work. Use the helpers added for kgdb to print out the content. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/xmon/xmon.c | 36 ++++++++++-------------------------- 1 file changed, 10 insertions(+), 26 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index eab3492a45c5..013f28668781 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -2148,40 +2149,23 @@ print_address(unsigned long addr) void dump_log_buf(void) { - const unsigned long size = 128; - unsigned long end, addr; - unsigned char buf[size + 1]; - - addr = 0; - buf[size] = '\0'; + struct kmsg_dumper dumper = { .active = 1 }; + unsigned char buf[128]; + size_t len; if (setjmp(bus_error_jmp) != 0) { - printf("Unable to lookup symbol __log_buf!\n"); + printf("Error dumping printk buffer!\n"); return; } catch_memory_errors = 1; sync(); - addr = kallsyms_lookup_name("__log_buf"); - - if (! addr) - printf("Symbol __log_buf not found!\n"); - else { - end = addr + (1 << CONFIG_LOG_BUF_SHIFT); - while (addr < end) { - if (! mread(addr, buf, size)) { - printf("Can't read memory at address 0x%lx\n", addr); - break; - } - - printf("%s", buf); - if (strlen(buf) < size) - break; - - addr += size; - } - } + kmsg_dump_rewind_nolock(&dumper); + while (kmsg_dump_get_line_nolock(&dumper, false, buf, sizeof(buf), &len)) { + buf[len] = '\0'; + printf("%s", buf); + } sync(); /* wait a little while to see if we get a machine check */ -- cgit v1.2.3 From e3bc8049e524f13e09a58f5bad70b6738494277a Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 23 Aug 2012 22:09:13 +0000 Subject: powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/xmon/xmon.c | 40 ++++++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 20 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 013f28668781..9b49c65ee7a4 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -895,13 +895,13 @@ cmds(struct pt_regs *excp) #endif default: printf("Unrecognized command: "); - do { + do { if (' ' < cmd && cmd <= '~') putchar(cmd); else printf("\\x%x", cmd); cmd = inchar(); - } while (cmd != '\n'); + } while (cmd != '\n'); printf(" (type ? for help)\n"); break; } @@ -1098,7 +1098,7 @@ static long check_bp_loc(unsigned long addr) return 1; } -static char *breakpoint_help_string = +static char *breakpoint_help_string = "Breakpoint command usage:\n" "b show breakpoints\n" "b [cnt] set breakpoint at given instr addr\n" @@ -1194,7 +1194,7 @@ bpt_cmds(void) default: termch = cmd; - cmd = skipbl(); + cmd = skipbl(); if (cmd == '?') { printf(breakpoint_help_string); break; @@ -1360,7 +1360,7 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr, sp + REGS_OFFSET); break; } - printf("--- Exception: %lx %s at ", regs.trap, + printf("--- Exception: %lx %s at ", regs.trap, getvecname(TRAP(®s))); pc = regs.nip; lr = regs.link; @@ -1624,14 +1624,14 @@ static void super_regs(void) cmd = skipbl(); if (cmd == '\n') { - unsigned long sp, toc; + unsigned long sp, toc; asm("mr %0,1" : "=r" (sp) :); asm("mr %0,2" : "=r" (toc) :); printf("msr = "REG" sprg0= "REG"\n", mfmsr(), mfspr(SPRN_SPRG0)); printf("pvr = "REG" sprg1= "REG"\n", - mfspr(SPRN_PVR), mfspr(SPRN_SPRG1)); + mfspr(SPRN_PVR), mfspr(SPRN_SPRG1)); printf("dec = "REG" sprg2= "REG"\n", mfspr(SPRN_DEC), mfspr(SPRN_SPRG2)); printf("sp = "REG" sprg3= "REG"\n", sp, mfspr(SPRN_SPRG3)); @@ -1784,7 +1784,7 @@ byterev(unsigned char *val, int size) static int brev; static int mnoread; -static char *memex_help_string = +static char *memex_help_string = "Memory examine command usage:\n" "m [addr] [flags] examine/change memory\n" " addr is optional. will start where left off.\n" @@ -1799,7 +1799,7 @@ static char *memex_help_string = "NOTE: flags are saved as defaults\n" ""; -static char *memex_subcmd_help_string = +static char *memex_subcmd_help_string = "Memory examine subcommands:\n" " hexval write this val to current location\n" " 'string' write chars from string to this location\n" @@ -2065,7 +2065,7 @@ prdump(unsigned long adrs, long ndump) nr = mread(adrs, temp, r); adrs += nr; for (m = 0; m < r; ++m) { - if ((m & (sizeof(long) - 1)) == 0 && m > 0) + if ((m & (sizeof(long) - 1)) == 0 && m > 0) putchar(' '); if (m < nr) printf("%.2x", temp[m]); @@ -2073,7 +2073,7 @@ prdump(unsigned long adrs, long ndump) printf("%s", fault_chars[fault_type]); } for (; m < 16; ++m) { - if ((m & (sizeof(long) - 1)) == 0) + if ((m & (sizeof(long) - 1)) == 0) putchar(' '); printf(" "); } @@ -2153,13 +2153,13 @@ dump_log_buf(void) unsigned char buf[128]; size_t len; - if (setjmp(bus_error_jmp) != 0) { + if (setjmp(bus_error_jmp) != 0) { printf("Error dumping printk buffer!\n"); - return; - } + return; + } - catch_memory_errors = 1; - sync(); + catch_memory_errors = 1; + sync(); kmsg_dump_rewind_nolock(&dumper); while (kmsg_dump_get_line_nolock(&dumper, false, buf, sizeof(buf), &len)) { @@ -2167,10 +2167,10 @@ dump_log_buf(void) printf("%s", buf); } - sync(); - /* wait a little while to see if we get a machine check */ - __delay(200); - catch_memory_errors = 0; + sync(); + /* wait a little while to see if we get a machine check */ + __delay(200); + catch_memory_errors = 0; } /* -- cgit v1.2.3 From 6d9c00c67b4768105e8ae3d213484095c744eea8 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 22 Aug 2012 20:30:43 +0000 Subject: powerpc: Fix null pointer deref in perf hardware breakpoints Currently if you are doing a global perf recording with hardware breakpoints (ie perf record -e mem:0xdeadbeef -a), you can oops with: Faulting instruction address: 0xc000000000738890 cpu 0xc: Vector: 300 (Data Access) at [c0000003f76af8d0] pc: c000000000738890: .hw_breakpoint_handler+0xa0/0x1e0 lr: c000000000738830: .hw_breakpoint_handler+0x40/0x1e0 sp: c0000003f76afb50 msr: 8000000000001032 dar: 6f0 dsisr: 42000000 current = 0xc0000003f765ac00 paca = 0xc00000000f262a00 softe: 0 irq_happened: 0x01 pid = 6810, comm = loop-read enter ? for help [c0000003f76afbe0] c00000000073cd04 .notifier_call_chain.isra.0+0x84/0xe0 [c0000003f76afc80] c00000000073cdbc .notify_die+0x3c/0x60 [c0000003f76afd20] c0000000000139f0 .do_dabr+0x40/0xf0 [c0000003f76afe30] c000000000005a9c handle_dabr_fault+0x14/0x48 --- Exception: 300 (Data Access) at 0000000010000480 SP (ff8679e0) is in userspace This is because we don't check to see if the break point is associated with task before we deference the task_struct pointer. This changes the update to use current. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/hw_breakpoint.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index f3a82dde61db..956a4c496de9 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -253,7 +253,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args) /* Do not emulate user-space instructions, instead single-step them */ if (user_mode(regs)) { - bp->ctx->task->thread.last_hit_ubp = bp; + current->thread.last_hit_ubp = bp; regs->msr |= MSR_SE; goto out; } -- cgit v1.2.3 From 46c5c59e6902855b61a31be1b8e26bfffcae1e07 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Wed, 22 Aug 2012 15:35:47 +0000 Subject: powerpc/mpic_msgr: Add missing includes Add several #includes that mpic_msgr relies on being pulled implicitly, which only happens on certain configs. Signed-off-by: Scott Wood Cc: Meador Inge Cc: Jia Hongtao Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mpic_msgr.h | 1 + arch/powerpc/sysdev/mpic_msgr.c | 3 +++ 2 files changed, 4 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/mpic_msgr.h b/arch/powerpc/include/asm/mpic_msgr.h index 326d33ca55cd..d4f471fb1031 100644 --- a/arch/powerpc/include/asm/mpic_msgr.h +++ b/arch/powerpc/include/asm/mpic_msgr.h @@ -14,6 +14,7 @@ #include #include #include +#include struct mpic_msgr { u32 __iomem *base; diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c index 483d8fa72e8b..e961f8c4a8f0 100644 --- a/arch/powerpc/sysdev/mpic_msgr.c +++ b/arch/powerpc/sysdev/mpic_msgr.c @@ -14,6 +14,9 @@ #include #include #include +#include +#include +#include #include #include #include -- cgit v1.2.3 From 572b411cb4f1b208bb8ea278752f956b3554371e Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Wed, 22 Aug 2012 16:10:18 +0000 Subject: powerpc/kgdb: Do not set kgdb_single_step on ppc The kgdb_single_step flag has the possibility to indefinitely hang the system on an SMP system. The x86 arch have the same problem, and that problem was fixed by commit 8097551d9ab9b9e3630(kgdb,x86: do not set kgdb_single_step on x86). This patch does the same behaviors as x86's patch. Signed-off-by: Dongdong Deng Signed-off-by: Jason Wessel Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/kgdb.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 782bd0a3c2f0..bbabc5abb1c4 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -410,7 +410,6 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, #else linux_regs->msr |= MSR_SE; #endif - kgdb_single_step = 1; atomic_set(&kgdb_cpu_doing_single_step, raw_smp_processor_id()); } -- cgit v1.2.3 From 949616cf2d3095d1bb6b3d155c1cc963abd98b5c Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Wed, 22 Aug 2012 16:10:19 +0000 Subject: powerpc/kgdb: Bail out of KGDB when we've been triggered We need to skip a breakpoint exception when it occurs after a breakpoint has already been removed. Signed-off-by: Tiejun Chen Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/kgdb.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index bbabc5abb1c4..05adb69febf4 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -101,6 +101,21 @@ static int computeSignal(unsigned int tt) return SIGHUP; /* default for things we don't know about */ } +/** + * + * kgdb_skipexception - Bail out of KGDB when we've been triggered. + * @exception: Exception vector number + * @regs: Current &struct pt_regs. + * + * On some architectures we need to skip a breakpoint exception when + * it occurs after a breakpoint has been removed. + * + */ +int kgdb_skipexception(int exception, struct pt_regs *regs) +{ + return kgdb_isremovedbreak(regs->nip); +} + static int kgdb_call_nmi_hook(struct pt_regs *regs) { kgdb_nmicallback(raw_smp_processor_id(), regs); -- cgit v1.2.3 From 5f630401f9e98bd062733b5bbef096dbf2158066 Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Wed, 22 Aug 2012 16:10:20 +0000 Subject: powerpc/kgdb: Restore current_thread_info properly For powerpc BooKE and e200, singlestep is handled on the critical/dbg exception stack. This causes current_thread_info() to fail for kgdb internal, so previously We work around this issue by copying the thread_info from the kernel stack before calling kgdb_handle_exception, and copying it back afterwards. But actually we don't do this properly. We should backup current_thread_info then restore that when exit. Signed-off-by: Tiejun Chen Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/kgdb.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 05adb69febf4..c470a40b29f5 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -25,6 +25,7 @@ #include #include #include +#include /* * This table contains the mapping between PowerPC hardware trap types, and @@ -153,6 +154,8 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs) static int kgdb_singlestep(struct pt_regs *regs) { struct thread_info *thread_info, *exception_thread_info; + struct thread_info *backup_current_thread_info = \ + (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL); if (user_mode(regs)) return 0; @@ -170,13 +173,17 @@ static int kgdb_singlestep(struct pt_regs *regs) thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1)); exception_thread_info = current_thread_info(); - if (thread_info != exception_thread_info) + if (thread_info != exception_thread_info) { + /* Save the original current_thread_info. */ + memcpy(backup_current_thread_info, exception_thread_info, sizeof *thread_info); memcpy(exception_thread_info, thread_info, sizeof *thread_info); + } kgdb_handle_exception(0, SIGTRAP, 0, regs); if (thread_info != exception_thread_info) - memcpy(thread_info, exception_thread_info, sizeof *thread_info); + /* Restore current_thread_info lastly. */ + memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info); return 1; } -- cgit v1.2.3 From f0f0c9ac2051e5da4afa1f3f908ace197a4de80e Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 21 Aug 2012 21:22:22 +0000 Subject: powerpc: Remove unnecessary ifdefs Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/cputable.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 50d82c8a037f..b3c083de17ad 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -553,9 +553,7 @@ static inline int cpu_has_feature(unsigned long feature) & feature); } -#ifdef CONFIG_HAVE_HW_BREAKPOINT #define HBP_NUM 1 -#endif /* CONFIG_HAVE_HW_BREAKPOINT */ #endif /* !__ASSEMBLY__ */ -- cgit v1.2.3 From 4c374af5fdee4bc6b4f5ea96c1a0f0ad7d3566be Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Sat, 18 Aug 2012 07:34:15 +0000 Subject: powerpc/dma-iommu: Fix IOMMU window check Checking for device mask to cover the whole IOMMU table is too strict. IOMMU allocators should handle mask constraint properly for each allocation. The patch enables to use old AirPort Extreme cards on PowerMacs with more than 1GB of memory; without the patch the driver init fails with: b43-pci-bridge 0001:01:01.0: Warning: IOMMU window too big for device mask b43-pci-bridge 0001:01:01.0: mask: 0x3fffffff, table end: 0x80000000 b43-phy0 ERROR: The machine/kernel does not support the required 30-bit DMA mask Signed-off-by: Aaro Koskinen Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/dma-iommu.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c index 2d7bb8ced136..e4897523de41 100644 --- a/arch/powerpc/kernel/dma-iommu.c +++ b/arch/powerpc/kernel/dma-iommu.c @@ -83,11 +83,10 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask) return 0; } - if ((tbl->it_offset + tbl->it_size) > (mask >> IOMMU_PAGE_SHIFT)) { - dev_info(dev, "Warning: IOMMU window too big for device mask\n"); - dev_info(dev, "mask: 0x%08llx, table end: 0x%08lx\n", - mask, (tbl->it_offset + tbl->it_size) << - IOMMU_PAGE_SHIFT); + if (tbl->it_offset > (mask >> IOMMU_PAGE_SHIFT)) { + dev_info(dev, "Warning: IOMMU offset too big for device mask\n"); + dev_info(dev, "mask: 0x%08llx, table offset: 0x%08lx\n", + mask, tbl->it_offset << IOMMU_PAGE_SHIFT); return 0; } else return 1; -- cgit v1.2.3 From 7256a5d2da56f2ea8ad49e8dbe9e2984f0899b42 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Mon, 13 Aug 2012 03:18:28 +0000 Subject: powerpc: Fix personality handling in ppc64_personality() Directly comparing current->personality against PER_LINUX32 doesn't work in cases when any of the personality flags stored in the top three bytes are used. Directly forcefully setting personality to PER_LINUX32 or PER_LINUX discards any flags stored in the top three bytes Use personality() macro to compare only PER_MASK bytes and make sure that we are setting only the bits that should be set, instead of overwriting the whole value. Signed-off-by: Jiri Kosina Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/syscalls.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index f2496f2faecc..4e3cc47f26b9 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -107,11 +107,11 @@ long ppc64_personality(unsigned long personality) long ret; if (personality(current->personality) == PER_LINUX32 - && personality == PER_LINUX) - personality = PER_LINUX32; + && personality(personality) == PER_LINUX) + personality = (personality & ~PER_MASK) | PER_LINUX32; ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; + if (personality(ret) == PER_LINUX32) + ret = (ret & ~PER_MASK) | PER_LINUX; return ret; } #endif -- cgit v1.2.3 From dad477ccd65f05bf3b5a874e0118bf4156a1fcbb Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 7 Aug 2012 17:50:46 +0000 Subject: powerpc: POWER7 copy_to_user/copy_from_user patch applied twice "powerpc: Use enhanced touch instructions in POWER7 copy_to_user/copy_from_user" was applied twice. Remove one. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/copyuser_power7.S | 31 ------------------------------- 1 file changed, 31 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S index f9ede7c6606e..4a4a46fbad0e 100644 --- a/arch/powerpc/lib/copyuser_power7.S +++ b/arch/powerpc/lib/copyuser_power7.S @@ -316,37 +316,6 @@ err1; stb r0,0(r3) lis r8,0x8000 /* GO=1 */ clrldi r8,r8,32 -.machine push -.machine "power4" - dcbt r0,r6,0b01000 - dcbt r0,r7,0b01010 - dcbtst r0,r9,0b01000 - dcbtst r0,r10,0b01010 - eieio - dcbt r0,r8,0b01010 /* GO */ -.machine pop - - /* - * We prefetch both the source and destination using enhanced touch - * instructions. We use a stream ID of 0 for the load side and - * 1 for the store side. - */ - clrrdi r6,r4,7 - clrrdi r9,r3,7 - ori r9,r9,1 /* stream=1 */ - - srdi r7,r5,7 /* length in cachelines, capped at 0x3FF */ - cmpldi cr1,r7,0x3FF - ble cr1,1f - li r7,0x3FF -1: lis r0,0x0E00 /* depth=7 */ - sldi r7,r7,7 - or r7,r7,r0 - ori r10,r7,1 /* stream=1 */ - - lis r8,0x8000 /* GO=1 */ - clrldi r8,r8,32 - .machine push .machine "power4" dcbt r0,r6,0b01000 -- cgit v1.2.3 From 2fae7cdb60240e2e2d9b378afbf6d9fcce8a3890 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 7 Aug 2012 17:51:41 +0000 Subject: powerpc: Fix VMX in interrupt check in POWER7 copy loops The enhanced prefetch hint patches corrupt the condition register that was used to check if we are in interrupt. Fix this by using cr1. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/copyuser_power7.S | 4 ++-- arch/powerpc/lib/memcpy_power7.S | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S index 4a4a46fbad0e..0d24ff15f5f6 100644 --- a/arch/powerpc/lib/copyuser_power7.S +++ b/arch/powerpc/lib/copyuser_power7.S @@ -288,7 +288,7 @@ err1; stb r0,0(r3) std r0,16(r1) stdu r1,-STACKFRAMESIZE(r1) bl .enter_vmx_usercopy - cmpwi r3,0 + cmpwi cr1,r3,0 ld r0,STACKFRAMESIZE+16(r1) ld r3,STACKFRAMESIZE+48(r1) ld r4,STACKFRAMESIZE+56(r1) @@ -326,7 +326,7 @@ err1; stb r0,0(r3) dcbt r0,r8,0b01010 /* GO */ .machine pop - beq .Lunwind_stack_nonvmx_copy + beq cr1,.Lunwind_stack_nonvmx_copy /* * If source and destination are not relatively aligned we use a diff --git a/arch/powerpc/lib/memcpy_power7.S b/arch/powerpc/lib/memcpy_power7.S index 0efdc51bc716..7ba6c96de778 100644 --- a/arch/powerpc/lib/memcpy_power7.S +++ b/arch/powerpc/lib/memcpy_power7.S @@ -222,7 +222,7 @@ _GLOBAL(memcpy_power7) std r0,16(r1) stdu r1,-STACKFRAMESIZE(r1) bl .enter_vmx_copy - cmpwi r3,0 + cmpwi cr1,r3,0 ld r0,STACKFRAMESIZE+16(r1) ld r3,STACKFRAMESIZE+48(r1) ld r4,STACKFRAMESIZE+56(r1) @@ -260,7 +260,7 @@ _GLOBAL(memcpy_power7) dcbt r0,r8,0b01010 /* GO */ .machine pop - beq .Lunwind_stack_nonvmx_copy + beq cr1,.Lunwind_stack_nonvmx_copy /* * If source and destination are not relatively aligned we use a -- cgit v1.2.3 From 813312110bede27bffd082c25cd31730bd567beb Mon Sep 17 00:00:00 2001 From: Sukadev Bhattiprolu Date: Tue, 7 Aug 2012 15:07:19 +0000 Subject: powerpc/perf: Use pmc_overflow() to detect rolled back events For certain speculative events on Power7, 'perf stat' reports far higher event count than 'perf record' for the same event. As described in following commit, a performance monitor exception is raised even when the the performance events are rolled back. commit 0837e3242c73566fc1c0196b4ec61779c25ffc93 Author: Anton Blanchard Date: Wed Mar 9 14:38:42 2011 +1100 perf_event_interrupt() records an event only when an overflow occurs. But this check for overflow is a simple 'if (val < 0)'. Because the events are rolled back, this check for overflow fails and the event is not recorded. perf_event_interrupt() later uses pmc_overflow() to detect the overflow and resets the counters and the events are lost completely. To properly detect the overflow of rolled back events, use pmc_overflow() even when recording events. To reproduce: $ cat strcpy.c #include #include main() { char buf[256]; alarm(5); while(1) strcpy(buf, "string1"); } $ perf record -e r20014 ./strcpy $ perf report -n > report.1 $ perf stat -e r20014 > report.2 # Compare report.1 and report.2 Reported-by: Maynard Johnson Signed-off-by: Sukadev Bhattiprolu Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/core-book3s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 77b49ddda9d3..7cd2dbd6e4c4 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1431,7 +1431,7 @@ static void perf_event_interrupt(struct pt_regs *regs) if (!event->hw.idx || is_limited_pmc(event->hw.idx)) continue; val = read_pmc(event->hw.idx); - if ((int)val < 0) { + if (pmc_overflow(val)) { /* event has overflowed */ found = 1; record_and_restart(event, val, regs); -- cgit v1.2.3 From 2c39bf49fd05305bea6d70670855047b2191d3f5 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 24 Aug 2012 20:55:55 +1000 Subject: Revert "powerpc: Update g5_defconfig" This reverts commit b1acf1bb544cf28c1f4be0a45620fa899c74b7e9. Something went horribly wrong when I did savedefconfig, not sure what, but what's in there is busted so let's revert it. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/g5_defconfig | 103 +++++++++++++++++++++++++++----------- 1 file changed, 73 insertions(+), 30 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 15130066e5e2..07b7f2af2dca 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,8 +1,10 @@ +CONFIG_PPC64=y +CONFIG_ALTIVEC=y +CONFIG_SMP=y +CONFIG_NR_CPUS=4 CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_BLK_DEV_INITRD=y @@ -13,15 +15,16 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_SMP=y -CONFIG_NR_CPUS=4 -CONFIG_KEXEC=y -# CONFIG_RELOCATABLE is not set +# CONFIG_PPC_PSERIES is not set CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_PMAC64=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_MIGRATION is not set CONFIG_PCI_MSI=y CONFIG_NET=y CONFIG_PACKET=y @@ -49,6 +52,7 @@ CONFIG_NF_CT_NETLINK=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_IP_NF_QUEUE=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y @@ -56,6 +60,8 @@ CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_CDROM_PKTCDVD=m CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y @@ -79,24 +85,33 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m -CONFIG_MACINTOSH_DRIVERS=y +CONFIG_IEEE1394=y +CONFIG_IEEE1394_OHCI1394=y +CONFIG_IEEE1394_SBP2=m +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_RAWIO=y +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y CONFIG_MAC_EMUMOUSEBTN=y +CONFIG_THERM_PM72=y +CONFIG_WINDFARM=y +CONFIG_WINDFARM_PM81=y +CONFIG_WINDFARM_PM91=y +CONFIG_WINDFARM_PM112=y +CONFIG_WINDFARM_PM121=y CONFIG_NETDEVICES=y -CONFIG_BONDING=m CONFIG_DUMMY=m -CONFIG_MII=y +CONFIG_BONDING=m CONFIG_TUN=m +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SUNGEM=y CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y -CONFIG_TIGON3=y CONFIG_E1000=y -CONFIG_SUNGEM=y -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPPOE=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m +CONFIG_TIGON3=y CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m @@ -106,24 +121,36 @@ CONFIG_USB_USBNET=m # CONFIG_USB_NET_NET1080 is not set # CONFIG_USB_NET_CDC_SUBSET is not set # CONFIG_USB_NET_ZAURUS is not set +CONFIG_PPP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_SERPORT is not set -CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y CONFIG_RAW_DRIVER=y CONFIG_I2C_CHARDEV=y # CONFIG_HWMON is not set -CONFIG_AGP=y -CONFIG_DRM=y -CONFIG_DRM_NOUVEAU=y +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_TILEBLITTING=y +CONFIG_FB_OF=y +CONFIG_FB_NVIDIA=y +CONFIG_FB_NVIDIA_I2C=y CONFIG_FB_RADEON=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SND=m @@ -131,7 +158,15 @@ CONFIG_SND_SEQUENCER=m CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_POWERMAC=m +CONFIG_SND_AOA=m +CONFIG_SND_AOA_FABRIC_LAYOUT=m +CONFIG_SND_AOA_ONYX=m +CONFIG_SND_AOA_TAS=m +CONFIG_SND_AOA_TOONIE=m CONFIG_SND_USB_AUDIO=m +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y CONFIG_HID_GYRATION=y CONFIG_LOGITECH_FF=y CONFIG_HID_PANTHERLORD=y @@ -139,12 +174,13 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y CONFIG_USB=y +CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_HCD_PPC_OF is not set CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=y @@ -208,6 +244,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_XFS_FS=m CONFIG_XFS_POSIX_ACL=y +CONFIG_INOTIFY=y +CONFIG_AUTOFS_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y @@ -221,12 +259,14 @@ CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=y CONFIG_NFS_FS=y +CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFSD=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_CIFS=m +CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_1250=y CONFIG_NLS_CODEPAGE_1251=y @@ -234,23 +274,29 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y +CONFIG_CRC_T10DIF=y +CONFIG_LIBCRC32C=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_LATENCYTOP=y -CONFIG_STRICT_DEVMEM=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_BOOTX_TEXT=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m @@ -260,6 +306,3 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set -# CONFIG_VIRTUALIZATION is not set -CONFIG_CRC_T10DIF=y -CONFIG_LIBCRC32C=m -- cgit v1.2.3 From 79c5fcebfe4021f326a6715009f0b6b622d5df92 Mon Sep 17 00:00:00 2001 From: Jesse Larrew Date: Thu, 7 Jun 2012 16:04:34 -0500 Subject: powerpc/vphn: Fix arch_update_cpu_topology() return value arch_update_cpu_topology() should only return 1 when the topology has actually changed, and should return 0 otherwise. This patch fixes a potential bug where rebuild_sched_domains() would reinitialize the sched domains even when the topology hasn't changed. Signed-off-by: Jesse Larrew Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 39b159751c35..59213cfaeca9 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1436,11 +1436,11 @@ static long vphn_get_associativity(unsigned long cpu, /* * Update the node maps and sysfs entries for each cpu whose home node - * has changed. + * has changed. Returns 1 when the topology has changed, and 0 otherwise. */ int arch_update_cpu_topology(void) { - int cpu, nid, old_nid; + int cpu, nid, old_nid, changed = 0; unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0}; struct device *dev; @@ -1466,9 +1466,10 @@ int arch_update_cpu_topology(void) dev = get_cpu_device(cpu); if (dev) kobject_uevent(&dev->kobj, KOBJ_CHANGE); + changed = 1; } - return 1; + return changed; } static void topology_work_fn(struct work_struct *work) -- cgit v1.2.3 From dabe859ec6360a12e71f39bf695d174e19ff2688 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 26 Jul 2012 13:56:11 +0000 Subject: powerpc: Give hypervisor decrementer interrupts their own handler At the moment the handler for hypervisor decrementer interrupts is the same as for decrementer interrupts, i.e. timer_interrupt(). This is bogus; if we ever do get a hypervisor decrementer interrupt it won't have anything to do with the next timer event. In fact the only time we get hypervisor decrementer interrupts is when one is left pending on exit from a KVM guest. When we get a hypervisor decrementer interrupt we don't need to do anything special to clear it, since they are edge-triggered on the transition of HDEC from 0 to -1. Thus this adds an empty handler function for them. We don't need to have them masked when interrupts are soft-disabled, so we use STD_EXCEPTION_HV instead of MASKABLE_EXCEPTION_HV. Signed-off-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/exceptions-64s.S | 3 ++- arch/powerpc/kernel/time.c | 9 +++++++++ 2 files changed, 11 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index e894515e77bb..39aa97d3ff88 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -186,7 +186,7 @@ hardware_interrupt_hv: KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x800) MASKABLE_EXCEPTION_PSERIES(0x900, 0x900, decrementer) - MASKABLE_EXCEPTION_HV(0x980, 0x982, decrementer) + STD_EXCEPTION_HV(0x980, 0x982, hdecrementer) STD_EXCEPTION_PSERIES(0xa00, 0xa00, trap_0a) KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xa00) @@ -486,6 +486,7 @@ machine_check_common: STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ) STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt) + STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt) STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception) STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index be171ee73bf8..e49e93191b69 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -535,6 +535,15 @@ void timer_interrupt(struct pt_regs * regs) trace_timer_interrupt_exit(regs); } +/* + * Hypervisor decrementer interrupts shouldn't occur but are sometimes + * left pending on exit from a KVM guest. We don't need to do anything + * to clear them, as they are edge-triggered. + */ +void hdec_interrupt(struct pt_regs *regs) +{ +} + #ifdef CONFIG_SUSPEND static void generic_suspend_disable_irqs(void) { -- cgit v1.2.3 From 375f561a4131a0f501c8845a2a20f2ca1abc8f7a Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 26 Jul 2012 18:51:09 +0000 Subject: powerpc/powernv: Always go into nap mode when CPU is offline The CPU hotplug code for the powernv platform currently only puts offline CPUs into nap mode if the powersave_nap variable is set. However, HV-style KVM on this platform requires secondary CPU threads to be offline and in nap mode. Since we know nap mode works just fine on all POWER7 machines, and the only machines that support the powernv platform are POWER7 machines, this changes the code to always put offline CPUs into nap mode, regardless of powersave_nap. Powersave_nap still controls whether or not CPUs go into nap mode when idle, as before. Signed-off-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/processor.h | 1 + arch/powerpc/kernel/idle_power7.S | 2 ++ arch/powerpc/platforms/powernv/smp.c | 10 +--------- 3 files changed, 4 insertions(+), 9 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 53b6dfa83344..54b73a28c205 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -386,6 +386,7 @@ extern unsigned long cpuidle_disable; enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF}; extern int powersave_nap; /* set if nap mode can be used in idle loop */ +extern void power7_nap(void); #ifdef CONFIG_PSERIES_IDLE extern void update_smt_snooze_delay(int snooze); diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S index 7140d838339e..e11863f4e595 100644 --- a/arch/powerpc/kernel/idle_power7.S +++ b/arch/powerpc/kernel/idle_power7.S @@ -28,7 +28,9 @@ _GLOBAL(power7_idle) lwz r4,ADDROFF(powersave_nap)(r3) cmpwi 0,r4,0 beqlr + /* fall through */ +_GLOBAL(power7_nap) /* NAP is a state loss, we create a regs frame on the * stack, fill it up with the state we care about and * stick a pointer to it in PACAR1. We really only diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c index 3ef46254c35b..7698b6e13c57 100644 --- a/arch/powerpc/platforms/powernv/smp.c +++ b/arch/powerpc/platforms/powernv/smp.c @@ -106,14 +106,6 @@ static void pnv_smp_cpu_kill_self(void) { unsigned int cpu; - /* If powersave_nap is enabled, use NAP mode, else just - * spin aimlessly - */ - if (!powersave_nap) { - generic_mach_cpu_die(); - return; - } - /* Standard hot unplug procedure */ local_irq_disable(); idle_task_exit(); @@ -128,7 +120,7 @@ static void pnv_smp_cpu_kill_self(void) */ mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1); while (!generic_check_cpu_restart(cpu)) { - power7_idle(); + power7_nap(); if (!generic_check_cpu_restart(cpu)) { DBG("CPU%d Unexpected exit while offline !\n", cpu); /* We may be getting an IPI, so we re-enable -- cgit v1.2.3 From 1b6ca2a6fe56e7697d57348646e07df08f43b1bb Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 3 Sep 2012 16:47:56 +0000 Subject: powerpc: Update DSCR on all CPUs when writing sysfs dscr_default Writing to dscr_default in sysfs doesn't actually change the DSCR - we rely on a context switch on each CPU to do the work. There is no guarantee we will get a context switch in a reasonable amount of time so fire off an IPI to force an immediate change. This issue was found with the following test case: http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c Signed-off-by: Anton Blanchard Cc: # 3.0+ Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/sysfs.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 3529446c2abd..d4cbbd1fa75f 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -194,6 +194,12 @@ static ssize_t show_dscr_default(struct device *dev, return sprintf(buf, "%lx\n", dscr_default); } +static void update_dscr(void *dummy) +{ + if (!current->thread.dscr_inherit) + mtspr(SPRN_DSCR, dscr_default); +} + static ssize_t __used store_dscr_default(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -206,6 +212,8 @@ static ssize_t __used store_dscr_default(struct device *dev, return -EINVAL; dscr_default = val; + on_each_cpu(update_dscr, NULL, 1); + return count; } -- cgit v1.2.3 From 00ca0de02f80924dfff6b4f630e1dff3db005e35 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 3 Sep 2012 16:48:46 +0000 Subject: powerpc: Keep thread.dscr and thread.dscr_inherit in sync When we update the DSCR either via emulation of mtspr(DSCR) or via a change to dscr_default in sysfs we don't update thread.dscr. We will eventually update it at context switch time but there is a period where thread.dscr is incorrect. If we fork at this point we will copy the old value of thread.dscr into the child. To avoid this, always keep thread.dscr in sync with reality. This issue was found with the following testcase: http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c Signed-off-by: Anton Blanchard Cc: # 3.0+ Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/sysfs.c | 4 +++- arch/powerpc/kernel/traps.c | 3 ++- 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index d4cbbd1fa75f..8302af649219 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -196,8 +196,10 @@ static ssize_t show_dscr_default(struct device *dev, static void update_dscr(void *dummy) { - if (!current->thread.dscr_inherit) + if (!current->thread.dscr_inherit) { + current->thread.dscr = dscr_default; mtspr(SPRN_DSCR, dscr_default); + } } static ssize_t __used store_dscr_default(struct device *dev, diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 158972341a2d..ae0843fa7a61 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -972,8 +972,9 @@ static int emulate_instruction(struct pt_regs *regs) cpu_has_feature(CPU_FTR_DSCR)) { PPC_WARN_EMULATED(mtdscr, regs); rd = (instword >> 21) & 0x1f; - mtspr(SPRN_DSCR, regs->gpr[rd]); + current->thread.dscr = regs->gpr[rd]; current->thread.dscr_inherit = 1; + mtspr(SPRN_DSCR, current->thread.dscr); return 0; } #endif -- cgit v1.2.3 From 1021cb268b3025573c4811f1dee4a11260c4507b Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 3 Sep 2012 16:49:47 +0000 Subject: powerpc: Fix DSCR inheritance in copy_thread() If the default DSCR is non zero we set thread.dscr_inherit in copy_thread() meaning the new thread and all its children will ignore future updates to the default DSCR. This is not intended and is a change in behaviour that a number of our users have hit. We just need to inherit thread.dscr and thread.dscr_inherit from the parent which ends up being much simpler. This was found with the following test case: http://ozlabs.org/~anton/junkcode/dscr_default_test.c Signed-off-by: Anton Blanchard Cc: # 3.0+ Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/process.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 710f400476de..1a1f2ddfb581 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -802,16 +802,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, #endif /* CONFIG_PPC_STD_MMU_64 */ #ifdef CONFIG_PPC64 if (cpu_has_feature(CPU_FTR_DSCR)) { - if (current->thread.dscr_inherit) { - p->thread.dscr_inherit = 1; - p->thread.dscr = current->thread.dscr; - } else if (0 != dscr_default) { - p->thread.dscr_inherit = 1; - p->thread.dscr = dscr_default; - } else { - p->thread.dscr_inherit = 0; - p->thread.dscr = 0; - } + p->thread.dscr_inherit = current->thread.dscr_inherit; + p->thread.dscr = current->thread.dscr; } #endif -- cgit v1.2.3 From 714332858bfd40dcf8f741498336d93875c23aa7 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 3 Sep 2012 16:51:10 +0000 Subject: powerpc: Restore correct DSCR in context switch During a context switch we always restore the per thread DSCR value. If we aren't doing explicit DSCR management (ie thread.dscr_inherit == 0) and the default DSCR changed while the process has been sleeping we end up with the wrong value. Check thread.dscr_inherit and select the default DSCR or per thread DSCR as required. This was found with the following test case, when running with more threads than CPUs (ie forcing context switching): http://ozlabs.org/~anton/junkcode/dscr_default_test.c With the four patches applied I can run a combination of all test cases successfully at the same time: http://ozlabs.org/~anton/junkcode/dscr_default_test.c http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c Signed-off-by: Anton Blanchard Cc: # 3.0+ Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/asm-offsets.c | 1 + arch/powerpc/kernel/entry_64.S | 23 +++++++++++++++++------ 2 files changed, 18 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 85b05c463fae..e8995727b1c1 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -76,6 +76,7 @@ int main(void) DEFINE(SIGSEGV, SIGSEGV); DEFINE(NMI_MASK, NMI_MASK); DEFINE(THREAD_DSCR, offsetof(struct thread_struct, dscr)); + DEFINE(THREAD_DSCR_INHERIT, offsetof(struct thread_struct, dscr_inherit)); #else DEFINE(THREAD_INFO, offsetof(struct task_struct, stack)); #endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 4b01a25e29ef..b40e0b4815b3 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -370,6 +370,12 @@ _GLOBAL(ret_from_fork) li r3,0 b syscall_exit + .section ".toc","aw" +DSCR_DEFAULT: + .tc dscr_default[TC],dscr_default + + .section ".text" + /* * This routine switches between two different tasks. The process * state of one is saved on its kernel stack. Then the state @@ -509,9 +515,6 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) mr r1,r8 /* start using new stack pointer */ std r7,PACAKSAVE(r13) - ld r6,_CCR(r1) - mtcrf 0xFF,r6 - #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION ld r0,THREAD_VRSAVE(r4) @@ -520,14 +523,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif /* CONFIG_ALTIVEC */ #ifdef CONFIG_PPC64 BEGIN_FTR_SECTION + lwz r6,THREAD_DSCR_INHERIT(r4) + ld r7,DSCR_DEFAULT@toc(2) ld r0,THREAD_DSCR(r4) - cmpd r0,r25 - beq 1f + cmpwi r6,0 + bne 1f + ld r0,0(r7) +1: cmpd r0,r25 + beq 2f mtspr SPRN_DSCR,r0 -1: +2: END_FTR_SECTION_IFSET(CPU_FTR_DSCR) #endif + ld r6,_CCR(r1) + mtcrf 0xFF,r6 + /* r3-r13 are destroyed -- Cort */ REST_8GPRS(14, r1) REST_10GPRS(22, r1) -- cgit v1.2.3 From 9fb1b36ca1234e64a5d1cc573175303395e3354d Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 4 Sep 2012 18:33:08 +0000 Subject: powerpc: Make sure IPI handlers see data written by IPI senders We have been observing hangs, both of KVM guest vcpu tasks and more generally, where a process that is woken doesn't properly wake up and continue to run, but instead sticks in TASK_WAKING state. This happens because the update of rq->wake_list in ttwu_queue_remote() is not ordered with the update of ipi_message in smp_muxed_ipi_message_pass(), and the reading of rq->wake_list in scheduler_ipi() is not ordered with the reading of ipi_message in smp_ipi_demux(). Thus it is possible for the IPI receiver not to see the updated rq->wake_list and therefore conclude that there is nothing for it to do. In order to make sure that anything done before smp_send_reschedule() is ordered before anything done in the resulting call to scheduler_ipi(), this adds barriers in smp_muxed_message_pass() and smp_ipi_demux(). The barrier in smp_muxed_message_pass() is a full barrier to ensure that there is a full ordering between the smp_send_reschedule() caller and scheduler_ipi(). In smp_ipi_demux(), we use xchg() rather than xchg_local() because xchg() includes release and acquire barriers. Using xchg() rather than xchg_local() makes sense given that ipi_message is not just accessed locally. This moves the barrier between setting the message and calling the cause_ipi() function into the individual cause_ipi implementations. Most of them -- those that used outb, out_8 or similar -- already had a full barrier because out_8 etc. include a sync before the MMIO store. This adds an explicit barrier in the two remaining cases. These changes made no measurable difference to the speed of IPIs as measured using a simple ping-pong latency test across two CPUs on different cores of a POWER7 machine. The analysis of the reason why processes were not waking up properly is due to Milton Miller. Cc: stable@vger.kernel.org # v3.0+ Reported-by: Milton Miller Signed-off-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/dbell.c | 2 ++ arch/powerpc/kernel/smp.c | 11 +++++++++-- arch/powerpc/sysdev/xics/icp-hv.c | 6 +++++- 3 files changed, 16 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c index 5b25c8060fd6..a892680668d8 100644 --- a/arch/powerpc/kernel/dbell.c +++ b/arch/powerpc/kernel/dbell.c @@ -28,6 +28,8 @@ void doorbell_setup_this_cpu(void) void doorbell_cause_ipi(int cpu, unsigned long data) { + /* Order previous accesses vs. msgsnd, which is treated as a store */ + mb(); ppc_msgsnd(PPC_DBELL, 0, data); } diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 0321007086f7..8d4214afc21d 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -198,8 +198,15 @@ void smp_muxed_ipi_message_pass(int cpu, int msg) struct cpu_messages *info = &per_cpu(ipi_message, cpu); char *message = (char *)&info->messages; + /* + * Order previous accesses before accesses in the IPI handler. + */ + smp_mb(); message[msg] = 1; - mb(); + /* + * cause_ipi functions are required to include a full barrier + * before doing whatever causes the IPI. + */ smp_ops->cause_ipi(cpu, info->data); } @@ -211,7 +218,7 @@ irqreturn_t smp_ipi_demux(void) mb(); /* order any irq clear */ do { - all = xchg_local(&info->messages, 0); + all = xchg(&info->messages, 0); #ifdef __BIG_ENDIAN if (all & (1 << (24 - 8 * PPC_MSG_CALL_FUNCTION))) diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c index 14469cf9df68..df0fc5821469 100644 --- a/arch/powerpc/sysdev/xics/icp-hv.c +++ b/arch/powerpc/sysdev/xics/icp-hv.c @@ -65,7 +65,11 @@ static inline void icp_hv_set_xirr(unsigned int value) static inline void icp_hv_set_qirr(int n_cpu , u8 value) { int hw_cpu = get_hard_smp_processor_id(n_cpu); - long rc = plpar_hcall_norets(H_IPI, hw_cpu, value); + long rc; + + /* Make sure all previous accesses are ordered before IPI sending */ + mb(); + rc = plpar_hcall_norets(H_IPI, hw_cpu, value); if (rc != H_SUCCESS) { pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x " "returned %ld\n", __func__, n_cpu, hw_cpu, value, rc); -- cgit v1.2.3 From 636802ef96eebe279b22ad9f9dacfe29291e45c7 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 4 Sep 2012 15:08:28 +0000 Subject: powerpc: Don't use __put_user() in patch_instruction patch_instruction() can be called very early on ppc32, when the kernel isn't yet running at it's linked address. That can cause the ! is_kernel_addr() test in __put_user() to trip and call might_sleep() which is very bad at that point during boot. Use a lower level function instead for now, at least until we get to rework ppc32 boot process to do the code patching later, like ppc64 does. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/code-patching.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c index dd223b3eb333..17e5b2364312 100644 --- a/arch/powerpc/lib/code-patching.c +++ b/arch/powerpc/lib/code-patching.c @@ -20,7 +20,7 @@ int patch_instruction(unsigned int *addr, unsigned int instr) { int err; - err = __put_user(instr, addr); + __put_user_size(instr, addr, 4, err); if (err) return err; asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (addr)); -- cgit v1.2.3