From 28158cd1b75180343efa7c4d7d2f8e74ccc63b8f Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Wed, 11 Feb 2015 10:20:49 +1100
Subject: powerpc/eeh: Enhance pcibios_set_pcie_reset_state()

Function pcibios_set_pcie_reset_state() is possibly called by
pci_reset_function(), on which VFIO infrastructure depends to
issue reset. pcibios_set_pcie_reset_state() is issuing reset
on the parent PE of the indicated PCI device. The reset causes
state lost on all PCI devices except the indicated one as the
argument to pcibios_set_pcie_reset_state(). Also, sideband
MMIO access from guest when issuing reset would cause unexpected
EEH error.

For above two issues, the patch applies following enhancements
to pcibios_set_pcie_reset_state():

   * For all PCI devices except the indicated one, save their
     state prior to reset and restore state after that.
   * Explicitly freeze PE prior to reset and unfreeze it after
     that, in order to avoid unexpected EEH error.

Tested-by: Priya M. A <priyama2@in.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/eeh.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 3b2252e7731b..19a897c810be 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -667,6 +667,55 @@ int eeh_pci_enable(struct eeh_pe *pe, int function)
 	return rc;
 }
 
+static void *eeh_disable_and_save_dev_state(void *data, void *userdata)
+{
+	struct eeh_dev *edev = data;
+	struct pci_dev *pdev = eeh_dev_to_pci_dev(edev);
+	struct pci_dev *dev = userdata;
+
+	/*
+	 * The caller should have disabled and saved the
+	 * state for the specified device
+	 */
+	if (!pdev || pdev == dev)
+		return NULL;
+
+	/* Ensure we have D0 power state */
+	pci_set_power_state(pdev, PCI_D0);
+
+	/* Save device state */
+	pci_save_state(pdev);
+
+	/*
+	 * Disable device to avoid any DMA traffic and
+	 * interrupt from the device
+	 */
+	pci_write_config_word(pdev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
+
+	return NULL;
+}
+
+static void *eeh_restore_dev_state(void *data, void *userdata)
+{
+	struct eeh_dev *edev = data;
+	struct device_node *dn = eeh_dev_to_of_node(edev);
+	struct pci_dev *pdev = eeh_dev_to_pci_dev(edev);
+	struct pci_dev *dev = userdata;
+
+	if (!pdev)
+		return NULL;
+
+	/* Apply customization from firmware */
+	if (dn && eeh_ops->restore_config)
+		eeh_ops->restore_config(dn);
+
+	/* The caller should restore state for the specified device */
+	if (pdev != dev)
+		pci_save_state(pdev);
+
+	return NULL;
+}
+
 /**
  * pcibios_set_pcie_slot_reset - Set PCI-E reset state
  * @dev: pci device struct
@@ -689,13 +738,19 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat
 	switch (state) {
 	case pcie_deassert_reset:
 		eeh_ops->reset(pe, EEH_RESET_DEACTIVATE);
+		eeh_unfreeze_pe(pe, false);
 		eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
+		eeh_pe_dev_traverse(pe, eeh_restore_dev_state, dev);
 		break;
 	case pcie_hot_reset:
+		eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
+		eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
 		eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
 		eeh_ops->reset(pe, EEH_RESET_HOT);
 		break;
 	case pcie_warm_reset:
+		eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
+		eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
 		eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
 		eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
 		break;
-- 
cgit v1.2.3


From cca87d303c85b257a7b0fd34f9d6fce1c59880a2 Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Tue, 17 Mar 2015 16:15:02 +1100
Subject: powerpc/pci: Refactor pci_dn

Currently, the PCI config accessors are implemented based on device node.
Unfortunately, SRIOV VFs won't have the corresponding device nodes. pci_dn
will be used in replacement with device node for SRIOV VFs. So we have to
use pci_dn in PCI config accessors.

The patch refactors pci_dn in following aspects to make it ready to be used
in PCI config accessors as we do in subsequent patch:

   * pci_dn is organized as a hierarchy tree.  PCI device's pci_dn is
     put to the child list of pci_dn of its upstream bridge or PHB. VF's
     pci_dn will be put to the child list of pci_dn of PF's bridge.

   * For one particular PCI device (VF or not), its pci_dn can be
     found from pdev->dev.archdata.pci_data, PCI_DN(devnode), or
     parent's list.  The fast path (fetching pci_dn through PCI device
     instance) is populated during early fixup time.

[bhelgaas: changelog]
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/pci_dn.c | 130 +++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 126 insertions(+), 4 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index 83df3075d3df..0ab2dadaf842 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -32,12 +32,108 @@
 #include <asm/ppc-pci.h>
 #include <asm/firmware.h>
 
+/*
+ * The function is used to find the firmware data of one
+ * specific PCI device, which is attached to the indicated
+ * PCI bus. For VFs, their firmware data is linked to that
+ * one of PF's bridge. For other devices, their firmware
+ * data is linked to that of their bridge.
+ */
+static struct pci_dn *pci_bus_to_pdn(struct pci_bus *bus)
+{
+	struct pci_bus *pbus;
+	struct device_node *dn;
+	struct pci_dn *pdn;
+
+	/*
+	 * We probably have virtual bus which doesn't
+	 * have associated bridge.
+	 */
+	pbus = bus;
+	while (pbus) {
+		if (pci_is_root_bus(pbus) || pbus->self)
+			break;
+
+		pbus = pbus->parent;
+	}
+
+	/*
+	 * Except virtual bus, all PCI buses should
+	 * have device nodes.
+	 */
+	dn = pci_bus_to_OF_node(pbus);
+	pdn = dn ? PCI_DN(dn) : NULL;
+
+	return pdn;
+}
+
+struct pci_dn *pci_get_pdn_by_devfn(struct pci_bus *bus,
+				    int devfn)
+{
+	struct device_node *dn = NULL;
+	struct pci_dn *parent, *pdn;
+	struct pci_dev *pdev = NULL;
+
+	/* Fast path: fetch from PCI device */
+	list_for_each_entry(pdev, &bus->devices, bus_list) {
+		if (pdev->devfn == devfn) {
+			if (pdev->dev.archdata.pci_data)
+				return pdev->dev.archdata.pci_data;
+
+			dn = pci_device_to_OF_node(pdev);
+			break;
+		}
+	}
+
+	/* Fast path: fetch from device node */
+	pdn = dn ? PCI_DN(dn) : NULL;
+	if (pdn)
+		return pdn;
+
+	/* Slow path: fetch from firmware data hierarchy */
+	parent = pci_bus_to_pdn(bus);
+	if (!parent)
+		return NULL;
+
+	list_for_each_entry(pdn, &parent->child_list, list) {
+		if (pdn->busno == bus->number &&
+                    pdn->devfn == devfn)
+                        return pdn;
+        }
+
+	return NULL;
+}
+
 struct pci_dn *pci_get_pdn(struct pci_dev *pdev)
 {
-	struct device_node *dn = pci_device_to_OF_node(pdev);
-	if (!dn)
+	struct device_node *dn;
+	struct pci_dn *parent, *pdn;
+
+	/* Search device directly */
+	if (pdev->dev.archdata.pci_data)
+		return pdev->dev.archdata.pci_data;
+
+	/* Check device node */
+	dn = pci_device_to_OF_node(pdev);
+	pdn = dn ? PCI_DN(dn) : NULL;
+	if (pdn)
+		return pdn;
+
+	/*
+	 * VFs don't have device nodes. We hook their
+	 * firmware data to PF's bridge.
+	 */
+	parent = pci_bus_to_pdn(pdev->bus);
+	if (!parent)
 		return NULL;
-	return PCI_DN(dn);
+
+	list_for_each_entry(pdn, &parent->child_list, list) {
+		if (pdn->busno == pdev->bus->number &&
+		    pdn->devfn == pdev->devfn)
+			return pdn;
+	}
+
+	return NULL;
 }
 
 /*
@@ -49,6 +145,7 @@ void *update_dn_pci_info(struct device_node *dn, void *data)
 	struct pci_controller *phb = data;
 	const __be32 *type = of_get_property(dn, "ibm,pci-config-space-type", NULL);
 	const __be32 *regs;
+	struct device_node *parent;
 	struct pci_dn *pdn;
 
 	pdn = zalloc_maybe_bootmem(sizeof(*pdn), GFP_KERNEL);
@@ -70,6 +167,15 @@ void *update_dn_pci_info(struct device_node *dn, void *data)
 	}
 
 	pdn->pci_ext_config_space = (type && of_read_number(type, 1) == 1);
+
+	/* Attach to parent node */
+	INIT_LIST_HEAD(&pdn->child_list);
+	INIT_LIST_HEAD(&pdn->list);
+	parent = of_get_parent(dn);
+	pdn->parent = parent ? PCI_DN(parent) : NULL;
+	if (pdn->parent)
+		list_add_tail(&pdn->list, &pdn->parent->child_list);
+
 	return NULL;
 }
 
@@ -147,8 +253,11 @@ void pci_devs_phb_init_dynamic(struct pci_controller *phb)
 	/* PHB nodes themselves must not match */
 	update_dn_pci_info(dn, phb);
 	pdn = dn->data;
-	if (pdn)
+	if (pdn) {
 		pdn->devfn = pdn->busno = -1;
+		pdn->phb = phb;
+		phb->pci_data = pdn;
+	}
 
 	/* Update dn->phb ptrs for new phb and children devices */
 	traverse_pci_devices(dn, update_dn_pci_info, phb);
@@ -171,3 +280,16 @@ void __init pci_devs_phb_init(void)
 	list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
 		pci_devs_phb_init_dynamic(phb);
 }
+
+static void pci_dev_pdn_setup(struct pci_dev *pdev)
+{
+	struct pci_dn *pdn;
+
+	if (pdev->dev.archdata.pci_data)
+		return;
+
+	/* Setup the fast path */
+	pdn = pci_get_pdn(pdev);
+	pdev->dev.archdata.pci_data = pdn;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, pci_dev_pdn_setup);
-- 
cgit v1.2.3


From c035ff1d2eaa03ab40839041e955a86a8e412eb4 Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Tue, 17 Mar 2015 16:15:04 +1100
Subject: powerpc/pci: Trace more information from pci_dn

Originally, EEH probes on device_node or pci_dev and populates the
corresponding eeh_dev. In the subsequent patches, EEH will probes
on pci_dn and populates the corresponding eeh_dev. So we have to
cache some information in pci_dn, either from device_node or SRIOV
PF's enablement platform hook, to populate the eeh_dev properly.

The motivation to probe pci_dn, instead of device node or pci_dev,
to populate eeh_dev is SRIOV VFs are dynamically created and we
don't have the corresponding device nodes for them.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/pci_dn.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index 0ab2dadaf842..d139f72ff9d5 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -166,6 +166,15 @@ void *update_dn_pci_info(struct device_node *dn, void *data)
 		pdn->devfn = (addr >> 8) & 0xff;
 	}
 
+	/* vendor/device IDs and class code */
+	regs = of_get_property(dn, "vendor-id", NULL);
+	pdn->vendor_id = regs ? of_read_number(regs, 1) : 0;
+	regs = of_get_property(dn, "device-id", NULL);
+	pdn->device_id = regs ? of_read_number(regs, 1) : 0;
+	regs = of_get_property(dn, "class-code", NULL);
+	pdn->class_code = regs ? of_read_number(regs, 1) : 0;
+
+	/* Extended config space */
 	pdn->pci_ext_config_space = (type && of_read_number(type, 1) == 1);
 
 	/* Attach to parent node */
@@ -255,6 +264,7 @@ void pci_devs_phb_init_dynamic(struct pci_controller *phb)
 	pdn = dn->data;
 	if (pdn) {
 		pdn->devfn = pdn->busno = -1;
+		pdn->vendor_id = pdn->device_id = pdn->class_code = 0;
 		pdn->phb = phb;
 		phb->pci_data = pdn;
 	}
-- 
cgit v1.2.3


From e8e9b34cef237d4d6fdc0d350cd8a95d1adb9ee9 Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Tue, 17 Mar 2015 16:15:05 +1100
Subject: powerpc/eeh: Create eeh_dev from pci_dn instead of device_node

The patch adds function traverse_pci_dn(), which is similar to
traverse_pci_devices() except it takes pci_dn, not device_node
as parameter. The pci_dev.c has been reworked to create eeh_dev
from pci_dn, instead of device_node.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/eeh_dev.c | 14 +++++++-------
 arch/powerpc/kernel/pci_dn.c  | 40 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 47 insertions(+), 7 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/kernel/eeh_dev.c b/arch/powerpc/kernel/eeh_dev.c
index e5274ee9a75f..aabba94ff9cb 100644
--- a/arch/powerpc/kernel/eeh_dev.c
+++ b/arch/powerpc/kernel/eeh_dev.c
@@ -43,13 +43,13 @@
 
 /**
  * eeh_dev_init - Create EEH device according to OF node
- * @dn: device node
+ * @pdn: PCI device node
  * @data: PHB
  *
  * It will create EEH device according to the given OF node. The function
  * might be called by PCI emunation, DR, PHB hotplug.
  */
-void *eeh_dev_init(struct device_node *dn, void *data)
+void *eeh_dev_init(struct pci_dn *pdn, void *data)
 {
 	struct pci_controller *phb = data;
 	struct eeh_dev *edev;
@@ -63,8 +63,8 @@ void *eeh_dev_init(struct device_node *dn, void *data)
 	}
 
 	/* Associate EEH device with OF node */
-	PCI_DN(dn)->edev = edev;
-	edev->dn  = dn;
+	pdn->edev = edev;
+	edev->pdn = pdn;
 	edev->phb = phb;
 	INIT_LIST_HEAD(&edev->list);
 
@@ -80,16 +80,16 @@ void *eeh_dev_init(struct device_node *dn, void *data)
  */
 void eeh_dev_phb_init_dynamic(struct pci_controller *phb)
 {
-	struct device_node *dn = phb->dn;
+	struct pci_dn *root = phb->pci_data;
 
 	/* EEH PE for PHB */
 	eeh_phb_pe_create(phb);
 
 	/* EEH device for PHB */
-	eeh_dev_init(dn, phb);
+	eeh_dev_init(root, phb);
 
 	/* EEH devices for children OF nodes */
-	traverse_pci_devices(dn, eeh_dev_init, phb);
+	traverse_pci_dn(root, eeh_dev_init, phb);
 }
 
 /**
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index d139f72ff9d5..65b98367005c 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -246,6 +246,46 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre,
 	return NULL;
 }
 
+static struct pci_dn *pci_dn_next_one(struct pci_dn *root,
+				      struct pci_dn *pdn)
+{
+	struct list_head *next = pdn->child_list.next;
+
+	if (next != &pdn->child_list)
+		return list_entry(next, struct pci_dn, list);
+
+	while (1) {
+		if (pdn == root)
+			return NULL;
+
+		next = pdn->list.next;
+		if (next != &pdn->parent->child_list)
+			break;
+
+		pdn = pdn->parent;
+	}
+
+	return list_entry(next, struct pci_dn, list);
+}
+
+void *traverse_pci_dn(struct pci_dn *root,
+		      void *(*fn)(struct pci_dn *, void *),
+		      void *data)
+{
+	struct pci_dn *pdn = root;
+	void *ret;
+
+	/* Only scan the child nodes */
+	for (pdn = pci_dn_next_one(root, pdn); pdn;
+	     pdn = pci_dn_next_one(root, pdn)) {
+		ret = fn(pdn, data);
+		if (ret)
+			return ret;
+	}
+
+	return NULL;
+}
+
 /** 
  * pci_devs_phb_init_dynamic - setup pci devices under this PHB
  * phb: pci-to-host bridge (top-level bridge connecting to cpu)
-- 
cgit v1.2.3


From ff57b454ddb938d98d48d8df356357000fedc88c Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Tue, 17 Mar 2015 16:15:06 +1100
Subject: powerpc/eeh: Do probe on pci_dn

Originally, EEH core probes on device_node or pci_dev to populate
EEH devices and PEs, which conflicts with the fact: SRIOV VFs are
usually enabled and created by PF's driver and they don't have the
corresponding device_nodes. Instead, SRIOV VFs have dynamically
created pci_dn, which can be used for EEH probe.

The patch reworks EEH probe for PowerNV and pSeries platforms to
do probing based on pci_dn, instead of pci_dev or device_node any
more.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/eeh.c         | 63 +++++++++++++--------------------------
 arch/powerpc/kernel/of_platform.c |  2 +-
 arch/powerpc/kernel/pci-hotplug.c |  2 +-
 3 files changed, 23 insertions(+), 44 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 19a897c810be..9504c2f0bb54 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -969,7 +969,7 @@ static struct notifier_block eeh_reboot_nb = {
 int eeh_init(void)
 {
 	struct pci_controller *hose, *tmp;
-	struct device_node *phb;
+	struct pci_dn *pdn;
 	static int cnt = 0;
 	int ret = 0;
 
@@ -1004,20 +1004,9 @@ int eeh_init(void)
 		return ret;
 
 	/* Enable EEH for all adapters */
-	if (eeh_has_flag(EEH_PROBE_MODE_DEVTREE)) {
-		list_for_each_entry_safe(hose, tmp,
-			&hose_list, list_node) {
-			phb = hose->dn;
-			traverse_pci_devices(phb, eeh_ops->of_probe, NULL);
-		}
-	} else if (eeh_has_flag(EEH_PROBE_MODE_DEV)) {
-		list_for_each_entry_safe(hose, tmp,
-			&hose_list, list_node)
-			pci_walk_bus(hose->bus, eeh_ops->dev_probe, NULL);
-	} else {
-		pr_warn("%s: Invalid probe mode %x",
-			__func__, eeh_subsystem_flags);
-		return -EINVAL;
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+		pdn = hose->pci_data;
+		traverse_pci_dn(pdn, eeh_ops->probe, NULL);
 	}
 
 	/*
@@ -1043,7 +1032,7 @@ core_initcall_sync(eeh_init);
 
 /**
  * eeh_add_device_early - Enable EEH for the indicated device_node
- * @dn: device node for which to set up EEH
+ * @pdn: PCI device node for which to set up EEH
  *
  * This routine must be used to perform EEH initialization for PCI
  * devices that were added after system boot (e.g. hotplug, dlpar).
@@ -1053,44 +1042,41 @@ core_initcall_sync(eeh_init);
  * on the CEC architecture, type of the device, on earlier boot
  * command-line arguments & etc.
  */
-void eeh_add_device_early(struct device_node *dn)
+void eeh_add_device_early(struct pci_dn *pdn)
 {
 	struct pci_controller *phb;
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
 
-	/*
-	 * If we're doing EEH probe based on PCI device, we
-	 * would delay the probe until late stage because
-	 * the PCI device isn't available this moment.
-	 */
-	if (!eeh_has_flag(EEH_PROBE_MODE_DEVTREE))
-		return;
-
-	if (!of_node_to_eeh_dev(dn))
+	if (!edev)
 		return;
-	phb = of_node_to_eeh_dev(dn)->phb;
 
 	/* USB Bus children of PCI devices will not have BUID's */
-	if (NULL == phb || 0 == phb->buid)
+	phb = edev->phb;
+	if (NULL == phb ||
+	    (eeh_has_flag(EEH_PROBE_MODE_DEVTREE) && 0 == phb->buid))
 		return;
 
-	eeh_ops->of_probe(dn, NULL);
+	eeh_ops->probe(pdn, NULL);
 }
 
 /**
  * eeh_add_device_tree_early - Enable EEH for the indicated device
- * @dn: device node
+ * @pdn: PCI device node
  *
  * This routine must be used to perform EEH initialization for the
  * indicated PCI device that was added after system boot (e.g.
  * hotplug, dlpar).
  */
-void eeh_add_device_tree_early(struct device_node *dn)
+void eeh_add_device_tree_early(struct pci_dn *pdn)
 {
-	struct device_node *sib;
+	struct pci_dn *n;
+
+	if (!pdn)
+		return;
 
-	for_each_child_of_node(dn, sib)
-		eeh_add_device_tree_early(sib);
-	eeh_add_device_early(dn);
+	list_for_each_entry(n, &pdn->child_list, list)
+		eeh_add_device_tree_early(n);
+	eeh_add_device_early(pdn);
 }
 EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
 
@@ -1144,13 +1130,6 @@ void eeh_add_device_late(struct pci_dev *dev)
 	edev->pdev = dev;
 	dev->dev.archdata.edev = edev;
 
-	/*
-	 * We have to do the EEH probe here because the PCI device
-	 * hasn't been created yet in the early stage.
-	 */
-	if (eeh_has_flag(EEH_PROBE_MODE_DEV))
-		eeh_ops->dev_probe(dev, NULL);
-
 	eeh_addr_cache_insert_dev(dev);
 }
 
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index 2f35a72642c6..b60a67d92ebd 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -72,7 +72,7 @@ static int of_pci_phb_probe(struct platform_device *dev)
 
 	/* Register devices with EEH */
 	if (dev->dev.of_node->child)
-		eeh_add_device_tree_early(dev->dev.of_node);
+		eeh_add_device_tree_early(PCI_DN(dev->dev.of_node));
 
 	/* Scan the bus */
 	pcibios_scan_phb(phb);
diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
index 5b789177aa29..18d9575729a3 100644
--- a/arch/powerpc/kernel/pci-hotplug.c
+++ b/arch/powerpc/kernel/pci-hotplug.c
@@ -75,7 +75,7 @@ void pcibios_add_pci_devices(struct pci_bus * bus)
 	struct pci_dev *dev;
 	struct device_node *dn = pci_bus_to_OF_node(bus);
 
-	eeh_add_device_tree_early(dn);
+	eeh_add_device_tree_early(PCI_DN(dn));
 
 	mode = PCI_PROBE_NORMAL;
 	if (ppc_md.pci_probe_mode)
-- 
cgit v1.2.3


From 0bd785873c6a6c9bd50d2ae19862f69ee5759fb9 Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Tue, 17 Mar 2015 16:15:07 +1100
Subject: powerpc/eeh: Replace device_node with pci_dn in eeh_ops

There are 3 EEH operations whose arguments contain device_node:
read_config(), write_config() and restore_config(). The patch
replaces device_node with pci_dn.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/eeh.c    | 40 +++++++++++----------
 arch/powerpc/kernel/eeh_pe.c | 82 +++++++++++++++++++++-----------------------
 2 files changed, 62 insertions(+), 60 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 9504c2f0bb54..1fd2566c87f1 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -164,30 +164,34 @@ __setup("eeh=", eeh_setup);
  */
 static size_t eeh_dump_dev_log(struct eeh_dev *edev, char *buf, size_t len)
 {
-	struct device_node *dn = eeh_dev_to_of_node(edev);
+	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 	u32 cfg;
 	int cap, i;
 	int n = 0, l = 0;
 	char buffer[128];
 
-	n += scnprintf(buf+n, len-n, "%s\n", dn->full_name);
-	pr_warn("EEH: of node=%s\n", dn->full_name);
+	n += scnprintf(buf+n, len-n, "%04x:%02x:%02x:%01x\n",
+		       edev->phb->global_number, pdn->busno,
+		       PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
+	pr_warn("EEH: of node=%04x:%02x:%02x:%01x\n",
+		edev->phb->global_number, pdn->busno,
+		PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
 
-	eeh_ops->read_config(dn, PCI_VENDOR_ID, 4, &cfg);
+	eeh_ops->read_config(pdn, PCI_VENDOR_ID, 4, &cfg);
 	n += scnprintf(buf+n, len-n, "dev/vend:%08x\n", cfg);
 	pr_warn("EEH: PCI device/vendor: %08x\n", cfg);
 
-	eeh_ops->read_config(dn, PCI_COMMAND, 4, &cfg);
+	eeh_ops->read_config(pdn, PCI_COMMAND, 4, &cfg);
 	n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg);
 	pr_warn("EEH: PCI cmd/status register: %08x\n", cfg);
 
 	/* Gather bridge-specific registers */
 	if (edev->mode & EEH_DEV_BRIDGE) {
-		eeh_ops->read_config(dn, PCI_SEC_STATUS, 2, &cfg);
+		eeh_ops->read_config(pdn, PCI_SEC_STATUS, 2, &cfg);
 		n += scnprintf(buf+n, len-n, "sec stat:%x\n", cfg);
 		pr_warn("EEH: Bridge secondary status: %04x\n", cfg);
 
-		eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &cfg);
+		eeh_ops->read_config(pdn, PCI_BRIDGE_CONTROL, 2, &cfg);
 		n += scnprintf(buf+n, len-n, "brdg ctl:%x\n", cfg);
 		pr_warn("EEH: Bridge control: %04x\n", cfg);
 	}
@@ -195,11 +199,11 @@ static size_t eeh_dump_dev_log(struct eeh_dev *edev, char *buf, size_t len)
 	/* Dump out the PCI-X command and status regs */
 	cap = edev->pcix_cap;
 	if (cap) {
-		eeh_ops->read_config(dn, cap, 4, &cfg);
+		eeh_ops->read_config(pdn, cap, 4, &cfg);
 		n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg);
 		pr_warn("EEH: PCI-X cmd: %08x\n", cfg);
 
-		eeh_ops->read_config(dn, cap+4, 4, &cfg);
+		eeh_ops->read_config(pdn, cap+4, 4, &cfg);
 		n += scnprintf(buf+n, len-n, "pcix-stat:%x\n", cfg);
 		pr_warn("EEH: PCI-X status: %08x\n", cfg);
 	}
@@ -211,7 +215,7 @@ static size_t eeh_dump_dev_log(struct eeh_dev *edev, char *buf, size_t len)
 		pr_warn("EEH: PCI-E capabilities and status follow:\n");
 
 		for (i=0; i<=8; i++) {
-			eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
+			eeh_ops->read_config(pdn, cap+4*i, 4, &cfg);
 			n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
 
 			if ((i % 4) == 0) {
@@ -238,7 +242,7 @@ static size_t eeh_dump_dev_log(struct eeh_dev *edev, char *buf, size_t len)
 		pr_warn("EEH: PCI-E AER capability register set follows:\n");
 
 		for (i=0; i<=13; i++) {
-			eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
+			eeh_ops->read_config(pdn, cap+4*i, 4, &cfg);
 			n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
 
 			if ((i % 4) == 0) {
@@ -698,7 +702,7 @@ static void *eeh_disable_and_save_dev_state(void *data, void *userdata)
 static void *eeh_restore_dev_state(void *data, void *userdata)
 {
 	struct eeh_dev *edev = data;
-	struct device_node *dn = eeh_dev_to_of_node(edev);
+	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 	struct pci_dev *pdev = eeh_dev_to_pci_dev(edev);
 	struct pci_dev *dev = userdata;
 
@@ -706,8 +710,8 @@ static void *eeh_restore_dev_state(void *data, void *userdata)
 		return NULL;
 
 	/* Apply customization from firmware */
-	if (dn && eeh_ops->restore_config)
-		eeh_ops->restore_config(dn);
+	if (pdn && eeh_ops->restore_config)
+		eeh_ops->restore_config(pdn);
 
 	/* The caller should restore state for the specified device */
 	if (pdev != dev)
@@ -870,15 +874,15 @@ out:
  */
 void eeh_save_bars(struct eeh_dev *edev)
 {
+	struct pci_dn *pdn;
 	int i;
-	struct device_node *dn;
 
-	if (!edev)
+	pdn = eeh_dev_to_pdn(edev);
+	if (!pdn)
 		return;
-	dn = eeh_dev_to_of_node(edev);
 
 	for (i = 0; i < 16; i++)
-		eeh_ops->read_config(dn, i * 4, 4, &edev->config_space[i]);
+		eeh_ops->read_config(pdn, i * 4, 4, &edev->config_space[i]);
 
 	/*
 	 * For PCI bridges including root port, we need enable bus
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 1e4946c36f9e..209cd753bf46 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -291,27 +291,25 @@ struct eeh_pe *eeh_pe_get(struct eeh_dev *edev)
  */
 static struct eeh_pe *eeh_pe_get_parent(struct eeh_dev *edev)
 {
-	struct device_node *dn;
 	struct eeh_dev *parent;
+	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 
 	/*
 	 * It might have the case for the indirect parent
 	 * EEH device already having associated PE, but
 	 * the direct parent EEH device doesn't have yet.
 	 */
-	dn = edev->dn->parent;
-	while (dn) {
+	pdn = pdn ? pdn->parent : NULL;
+	while (pdn) {
 		/* We're poking out of PCI territory */
-		if (!PCI_DN(dn)) return NULL;
-
-		parent = of_node_to_eeh_dev(dn);
-		/* We're poking out of PCI territory */
-		if (!parent) return NULL;
+		parent = pdn_to_eeh_dev(pdn);
+		if (!parent)
+			return NULL;
 
 		if (parent->pe)
 			return parent->pe;
 
-		dn = dn->parent;
+		pdn = pdn->parent;
 	}
 
 	return NULL;
@@ -653,9 +651,9 @@ void eeh_pe_state_clear(struct eeh_pe *pe, int state)
  * blocked on normal path during the stage. So we need utilize
  * eeh operations, which is always permitted.
  */
-static void eeh_bridge_check_link(struct eeh_dev *edev,
-				  struct device_node *dn)
+static void eeh_bridge_check_link(struct eeh_dev *edev)
 {
+	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 	int cap;
 	uint32_t val;
 	int timeout = 0;
@@ -675,32 +673,32 @@ static void eeh_bridge_check_link(struct eeh_dev *edev,
 
 	/* Check slot status */
 	cap = edev->pcie_cap;
-	eeh_ops->read_config(dn, cap + PCI_EXP_SLTSTA, 2, &val);
+	eeh_ops->read_config(pdn, cap + PCI_EXP_SLTSTA, 2, &val);
 	if (!(val & PCI_EXP_SLTSTA_PDS)) {
 		pr_debug("  No card in the slot (0x%04x) !\n", val);
 		return;
 	}
 
 	/* Check power status if we have the capability */
-	eeh_ops->read_config(dn, cap + PCI_EXP_SLTCAP, 2, &val);
+	eeh_ops->read_config(pdn, cap + PCI_EXP_SLTCAP, 2, &val);
 	if (val & PCI_EXP_SLTCAP_PCP) {
-		eeh_ops->read_config(dn, cap + PCI_EXP_SLTCTL, 2, &val);
+		eeh_ops->read_config(pdn, cap + PCI_EXP_SLTCTL, 2, &val);
 		if (val & PCI_EXP_SLTCTL_PCC) {
 			pr_debug("  In power-off state, power it on ...\n");
 			val &= ~(PCI_EXP_SLTCTL_PCC | PCI_EXP_SLTCTL_PIC);
 			val |= (0x0100 & PCI_EXP_SLTCTL_PIC);
-			eeh_ops->write_config(dn, cap + PCI_EXP_SLTCTL, 2, val);
+			eeh_ops->write_config(pdn, cap + PCI_EXP_SLTCTL, 2, val);
 			msleep(2 * 1000);
 		}
 	}
 
 	/* Enable link */
-	eeh_ops->read_config(dn, cap + PCI_EXP_LNKCTL, 2, &val);
+	eeh_ops->read_config(pdn, cap + PCI_EXP_LNKCTL, 2, &val);
 	val &= ~PCI_EXP_LNKCTL_LD;
-	eeh_ops->write_config(dn, cap + PCI_EXP_LNKCTL, 2, val);
+	eeh_ops->write_config(pdn, cap + PCI_EXP_LNKCTL, 2, val);
 
 	/* Check link */
-	eeh_ops->read_config(dn, cap + PCI_EXP_LNKCAP, 4, &val);
+	eeh_ops->read_config(pdn, cap + PCI_EXP_LNKCAP, 4, &val);
 	if (!(val & PCI_EXP_LNKCAP_DLLLARC)) {
 		pr_debug("  No link reporting capability (0x%08x) \n", val);
 		msleep(1000);
@@ -713,7 +711,7 @@ static void eeh_bridge_check_link(struct eeh_dev *edev,
 		msleep(20);
 		timeout += 20;
 
-		eeh_ops->read_config(dn, cap + PCI_EXP_LNKSTA, 2, &val);
+		eeh_ops->read_config(pdn, cap + PCI_EXP_LNKSTA, 2, &val);
 		if (val & PCI_EXP_LNKSTA_DLLLA)
 			break;
 	}
@@ -728,9 +726,9 @@ static void eeh_bridge_check_link(struct eeh_dev *edev,
 #define BYTE_SWAP(OFF)	(8*((OFF)/4)+3-(OFF))
 #define SAVED_BYTE(OFF)	(((u8 *)(edev->config_space))[BYTE_SWAP(OFF)])
 
-static void eeh_restore_bridge_bars(struct eeh_dev *edev,
-				    struct device_node *dn)
+static void eeh_restore_bridge_bars(struct eeh_dev *edev)
 {
+	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 	int i;
 
 	/*
@@ -738,49 +736,49 @@ static void eeh_restore_bridge_bars(struct eeh_dev *edev,
 	 * Bus numbers and windows: 0x18 - 0x30
 	 */
 	for (i = 4; i < 13; i++)
-		eeh_ops->write_config(dn, i*4, 4, edev->config_space[i]);
+		eeh_ops->write_config(pdn, i*4, 4, edev->config_space[i]);
 	/* Rom: 0x38 */
-	eeh_ops->write_config(dn, 14*4, 4, edev->config_space[14]);
+	eeh_ops->write_config(pdn, 14*4, 4, edev->config_space[14]);
 
 	/* Cache line & Latency timer: 0xC 0xD */
-	eeh_ops->write_config(dn, PCI_CACHE_LINE_SIZE, 1,
+	eeh_ops->write_config(pdn, PCI_CACHE_LINE_SIZE, 1,
                 SAVED_BYTE(PCI_CACHE_LINE_SIZE));
-        eeh_ops->write_config(dn, PCI_LATENCY_TIMER, 1,
+        eeh_ops->write_config(pdn, PCI_LATENCY_TIMER, 1,
                 SAVED_BYTE(PCI_LATENCY_TIMER));
 	/* Max latency, min grant, interrupt ping and line: 0x3C */
-	eeh_ops->write_config(dn, 15*4, 4, edev->config_space[15]);
+	eeh_ops->write_config(pdn, 15*4, 4, edev->config_space[15]);
 
 	/* PCI Command: 0x4 */
-	eeh_ops->write_config(dn, PCI_COMMAND, 4, edev->config_space[1]);
+	eeh_ops->write_config(pdn, PCI_COMMAND, 4, edev->config_space[1]);
 
 	/* Check the PCIe link is ready */
-	eeh_bridge_check_link(edev, dn);
+	eeh_bridge_check_link(edev);
 }
 
-static void eeh_restore_device_bars(struct eeh_dev *edev,
-				    struct device_node *dn)
+static void eeh_restore_device_bars(struct eeh_dev *edev)
 {
+	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 	int i;
 	u32 cmd;
 
 	for (i = 4; i < 10; i++)
-		eeh_ops->write_config(dn, i*4, 4, edev->config_space[i]);
+		eeh_ops->write_config(pdn, i*4, 4, edev->config_space[i]);
 	/* 12 == Expansion ROM Address */
-	eeh_ops->write_config(dn, 12*4, 4, edev->config_space[12]);
+	eeh_ops->write_config(pdn, 12*4, 4, edev->config_space[12]);
 
-	eeh_ops->write_config(dn, PCI_CACHE_LINE_SIZE, 1,
+	eeh_ops->write_config(pdn, PCI_CACHE_LINE_SIZE, 1,
 		SAVED_BYTE(PCI_CACHE_LINE_SIZE));
-	eeh_ops->write_config(dn, PCI_LATENCY_TIMER, 1,
+	eeh_ops->write_config(pdn, PCI_LATENCY_TIMER, 1,
 		SAVED_BYTE(PCI_LATENCY_TIMER));
 
 	/* max latency, min grant, interrupt pin and line */
-	eeh_ops->write_config(dn, 15*4, 4, edev->config_space[15]);
+	eeh_ops->write_config(pdn, 15*4, 4, edev->config_space[15]);
 
 	/*
 	 * Restore PERR & SERR bits, some devices require it,
 	 * don't touch the other command bits
 	 */
-	eeh_ops->read_config(dn, PCI_COMMAND, 4, &cmd);
+	eeh_ops->read_config(pdn, PCI_COMMAND, 4, &cmd);
 	if (edev->config_space[1] & PCI_COMMAND_PARITY)
 		cmd |= PCI_COMMAND_PARITY;
 	else
@@ -789,7 +787,7 @@ static void eeh_restore_device_bars(struct eeh_dev *edev,
 		cmd |= PCI_COMMAND_SERR;
 	else
 		cmd &= ~PCI_COMMAND_SERR;
-	eeh_ops->write_config(dn, PCI_COMMAND, 4, cmd);
+	eeh_ops->write_config(pdn, PCI_COMMAND, 4, cmd);
 }
 
 /**
@@ -804,16 +802,16 @@ static void eeh_restore_device_bars(struct eeh_dev *edev,
 static void *eeh_restore_one_device_bars(void *data, void *flag)
 {
 	struct eeh_dev *edev = (struct eeh_dev *)data;
-	struct device_node *dn = eeh_dev_to_of_node(edev);
+	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 
 	/* Do special restore for bridges */
 	if (edev->mode & EEH_DEV_BRIDGE)
-		eeh_restore_bridge_bars(edev, dn);
+		eeh_restore_bridge_bars(edev);
 	else
-		eeh_restore_device_bars(edev, dn);
+		eeh_restore_device_bars(edev);
 
-	if (eeh_ops->restore_config)
-		eeh_ops->restore_config(dn);
+	if (eeh_ops->restore_config && pdn)
+		eeh_ops->restore_config(pdn);
 
 	return NULL;
 }
-- 
cgit v1.2.3


From c6406d8fbb014bebdfb5bf3c244548958aec7379 Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Tue, 17 Mar 2015 16:15:08 +1100
Subject: powerpc/eeh: Remove device_node dependency

The patch removes struct eeh_dev::dn and the corresponding helper
functions: eeh_dev_to_of_node() and of_node_to_eeh_dev(). Instead,
eeh_dev_to_pdn() and pdn_to_eeh_dev() should be used to get the
pdn, which might contain device_node on PowerNV platform.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/eeh.c         | 24 +++++++++++++-----------
 arch/powerpc/kernel/eeh_cache.c   | 25 +++++++++++--------------
 arch/powerpc/kernel/eeh_driver.c  | 22 ----------------------
 arch/powerpc/kernel/eeh_pe.c      | 34 +++++++++++++++++++++++++---------
 arch/powerpc/kernel/pci_of_scan.c |  2 +-
 arch/powerpc/kernel/rtas_pci.c    |  2 +-
 6 files changed, 51 insertions(+), 58 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 1fd2566c87f1..76253eb146be 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -418,11 +418,11 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
 	int ret;
 	int active_flags = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE);
 	unsigned long flags;
-	struct device_node *dn;
+	struct pci_dn *pdn;
 	struct pci_dev *dev;
 	struct eeh_pe *pe, *parent_pe, *phb_pe;
 	int rc = 0;
-	const char *location;
+	const char *location = NULL;
 
 	eeh_stats.total_mmio_ffs++;
 
@@ -433,15 +433,14 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
 		eeh_stats.no_dn++;
 		return 0;
 	}
-	dn = eeh_dev_to_of_node(edev);
 	dev = eeh_dev_to_pci_dev(edev);
 	pe = eeh_dev_to_pe(edev);
 
 	/* Access to IO BARs might get this far and still not want checking. */
 	if (!pe) {
 		eeh_stats.ignored_check++;
-		pr_debug("EEH: Ignored check for %s %s\n",
-			eeh_pci_name(dev), dn->full_name);
+		pr_debug("EEH: Ignored check for %s\n",
+			eeh_pci_name(dev));
 		return 0;
 	}
 
@@ -477,10 +476,13 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
 	if (pe->state & EEH_PE_ISOLATED) {
 		pe->check_count++;
 		if (pe->check_count % EEH_MAX_FAILS == 0) {
-			location = of_get_property(dn, "ibm,loc-code", NULL);
+			pdn = eeh_dev_to_pdn(edev);
+			if (pdn->node)
+				location = of_get_property(pdn->node, "ibm,loc-code", NULL);
 			printk(KERN_ERR "EEH: %d reads ignored for recovering device at "
 				"location=%s driver=%s pci addr=%s\n",
-				pe->check_count, location,
+				pe->check_count,
+				location ? location : "unknown",
 				eeh_driver_name(dev), eeh_pci_name(dev));
 			printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n",
 				eeh_driver_name(dev));
@@ -1035,7 +1037,7 @@ int eeh_init(void)
 core_initcall_sync(eeh_init);
 
 /**
- * eeh_add_device_early - Enable EEH for the indicated device_node
+ * eeh_add_device_early - Enable EEH for the indicated device node
  * @pdn: PCI device node for which to set up EEH
  *
  * This routine must be used to perform EEH initialization for PCI
@@ -1093,7 +1095,7 @@ EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
  */
 void eeh_add_device_late(struct pci_dev *dev)
 {
-	struct device_node *dn;
+	struct pci_dn *pdn;
 	struct eeh_dev *edev;
 
 	if (!dev || !eeh_enabled())
@@ -1101,8 +1103,8 @@ void eeh_add_device_late(struct pci_dev *dev)
 
 	pr_debug("EEH: Adding device %s\n", pci_name(dev));
 
-	dn = pci_device_to_OF_node(dev);
-	edev = of_node_to_eeh_dev(dn);
+	pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
+	edev = pdn_to_eeh_dev(pdn);
 	if (edev->pdev == dev) {
 		pr_debug("EEH: Already referenced !\n");
 		return;
diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c
index 07d8a2423a61..eeabeabea49c 100644
--- a/arch/powerpc/kernel/eeh_cache.c
+++ b/arch/powerpc/kernel/eeh_cache.c
@@ -171,30 +171,27 @@ eeh_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
 
 static void __eeh_addr_cache_insert_dev(struct pci_dev *dev)
 {
-	struct device_node *dn;
+	struct pci_dn *pdn;
 	struct eeh_dev *edev;
 	int i;
 
-	dn = pci_device_to_OF_node(dev);
-	if (!dn) {
+	pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
+	if (!pdn) {
 		pr_warn("PCI: no pci dn found for dev=%s\n",
 			pci_name(dev));
 		return;
 	}
 
-	edev = of_node_to_eeh_dev(dn);
+	edev = pdn_to_eeh_dev(pdn);
 	if (!edev) {
-		pr_warn("PCI: no EEH dev found for dn=%s\n",
-			dn->full_name);
+		pr_warn("PCI: no EEH dev found for %s\n",
+			pci_name(dev));
 		return;
 	}
 
 	/* Skip any devices for which EEH is not enabled. */
 	if (!edev->pe) {
-#ifdef DEBUG
-		pr_info("PCI: skip building address cache for=%s - %s\n",
-			pci_name(dev), dn->full_name);
-#endif
+		dev_dbg(&dev->dev, "EEH: Skip building address cache\n");
 		return;
 	}
 
@@ -282,18 +279,18 @@ void eeh_addr_cache_rmv_dev(struct pci_dev *dev)
  */
 void eeh_addr_cache_build(void)
 {
-	struct device_node *dn;
+	struct pci_dn *pdn;
 	struct eeh_dev *edev;
 	struct pci_dev *dev = NULL;
 
 	spin_lock_init(&pci_io_addr_cache_root.piar_lock);
 
 	for_each_pci_dev(dev) {
-		dn = pci_device_to_OF_node(dev);
-		if (!dn)
+		pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
+		if (!pdn)
 			continue;
 
-		edev = of_node_to_eeh_dev(dn);
+		edev = pdn_to_eeh_dev(pdn);
 		if (!edev)
 			continue;
 
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index d099540c0f56..24768ff3cb73 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -83,28 +83,6 @@ static inline void eeh_pcid_put(struct pci_dev *pdev)
 	module_put(pdev->driver->driver.owner);
 }
 
-#if 0
-static void print_device_node_tree(struct pci_dn *pdn, int dent)
-{
-	int i;
-	struct device_node *pc;
-
-	if (!pdn)
-		return;
-	for (i = 0; i < dent; i++)
-		printk(" ");
-	printk("dn=%s mode=%x \tcfg_addr=%x pe_addr=%x \tfull=%s\n",
-		pdn->node->name, pdn->eeh_mode, pdn->eeh_config_addr,
-		pdn->eeh_pe_config_addr, pdn->node->full_name);
-	dent += 3;
-	pc = pdn->node->child;
-	while (pc) {
-		print_device_node_tree(PCI_DN(pc), dent);
-		pc = pc->sibling;
-	}
-}
-#endif
-
 /**
  * eeh_disable_irq - Disable interrupt for the recovering device
  * @dev: PCI device
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 209cd753bf46..f33ceccf6876 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -348,9 +348,12 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 
 		/* Put the edev to PE */
 		list_add_tail(&edev->list, &pe->edevs);
-		pr_debug("EEH: Add %s to Bus PE#%x\n",
-			edev->dn->full_name, pe->addr);
-
+		pr_debug("EEH: Add %04x:%02x:%02x.%01x to Bus PE#%x\n",
+			edev->phb->global_number,
+			edev->config_addr >> 8,
+			PCI_SLOT(edev->config_addr & 0xFF),
+			PCI_FUNC(edev->config_addr & 0xFF),
+			pe->addr);
 		return 0;
 	} else if (pe && (pe->type & EEH_PE_INVALID)) {
 		list_add_tail(&edev->list, &pe->edevs);
@@ -366,9 +369,14 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 			parent->type &= ~(EEH_PE_INVALID | EEH_PE_KEEP);
 			parent = parent->parent;
 		}
-		pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n",
-			edev->dn->full_name, pe->addr, pe->parent->addr);
 
+		pr_debug("EEH: Add %04x:%02x:%02x.%01x to Device "
+			 "PE#%x, Parent PE#%x\n",
+			edev->phb->global_number,
+			edev->config_addr >> 8,
+                        PCI_SLOT(edev->config_addr & 0xFF),
+                        PCI_FUNC(edev->config_addr & 0xFF),
+			pe->addr, pe->parent->addr);
 		return 0;
 	}
 
@@ -407,8 +415,13 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 	list_add_tail(&pe->child, &parent->child_list);
 	list_add_tail(&edev->list, &pe->edevs);
 	edev->pe = pe;
-	pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n",
-		edev->dn->full_name, pe->addr, pe->parent->addr);
+	pr_debug("EEH: Add %04x:%02x:%02x.%01x to "
+		 "Device PE#%x, Parent PE#%x\n",
+		 edev->phb->global_number,
+		 edev->config_addr >> 8,
+		 PCI_SLOT(edev->config_addr & 0xFF),
+		 PCI_FUNC(edev->config_addr & 0xFF),
+		 pe->addr, pe->parent->addr);
 
 	return 0;
 }
@@ -428,8 +441,11 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev)
 	int cnt;
 
 	if (!edev->pe) {
-		pr_debug("%s: No PE found for EEH device %s\n",
-			 __func__, edev->dn->full_name);
+		pr_debug("%s: No PE found for device %04x:%02x:%02x.%01x\n",
+			 __func__,  edev->phb->global_number,
+			 edev->config_addr >> 8,
+			 PCI_SLOT(edev->config_addr & 0xFF),
+			 PCI_FUNC(edev->config_addr & 0xFF));
 		return -EEXIST;
 	}
 
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index e6245e9c7d8d..7122dfece393 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -305,7 +305,7 @@ static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus,
 	const __be32 *reg;
 	int reglen, devfn;
 #ifdef CONFIG_EEH
-	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+	struct eeh_dev *edev = pdn_to_eeh_dev(PCI_DN(dn));
 #endif
 
 	pr_debug("  * %s\n", dn->full_name);
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index ce230da2c015..af29df2517f7 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -113,7 +113,7 @@ static int rtas_pci_read_config(struct pci_bus *bus,
 
 	ret = rtas_read_config(pdn, where, size, val);
 	if (*val == EEH_IO_ERROR_VALUE(size) &&
-	    eeh_dev_check_failure(of_node_to_eeh_dev(dn)))
+	    eeh_dev_check_failure(pdn_to_eeh_dev(pdn)))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	return ret;
-- 
cgit v1.2.3


From 433185d2b4e9c25f2a444424c05af72fbadd4275 Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Fri, 27 Mar 2015 11:22:17 +1100
Subject: powerpc/eeh: Fix PE#0 check in eeh_add_to_parent_pe()

The function eeh_add_parent_pe() is used to create a PE or add one
edev to its parent PE. Current code checks if PE#0 is valid for the
later case. Actually, we should validate PE#0 for both cases when
EEH core regards PE#0 as invalid one (without flag EEH_VALID_PE_ZERO).
Otherwise, not all EEH devices can be added to its parent PE#0 for
EEH on P7IOC.

The patch fixes the issue by validating PE#0 for the two cases. So far,
we don't have PE#0 for EEH on P7IOC, but it will show up when we enable
M64 for P7IOC. The patch also makes the error message more meaningful.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/eeh_pe.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index f33ceccf6876..35f0b62259bb 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -328,6 +328,13 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 {
 	struct eeh_pe *pe, *parent;
 
+	/* Check if the PE number is valid */
+	if (!eeh_has_flag(EEH_VALID_PE_ZERO) && !edev->pe_config_addr) {
+		pr_err("%s: Invalid PE#0 for edev 0x%x on PHB#%d\n",
+		       __func__, edev->config_addr, edev->phb->global_number);
+		return -EINVAL;
+	}
+
 	/*
 	 * Search the PE has been existing or not according
 	 * to the PE address. If that has been existing, the
@@ -336,12 +343,6 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 	 */
 	pe = eeh_pe_get(edev);
 	if (pe && !(pe->type & EEH_PE_INVALID)) {
-		if (!edev->pe_config_addr) {
-			pr_err("%s: PE with addr 0x%x already exists\n",
-				__func__, edev->config_addr);
-			return -EEXIST;
-		}
-
 		/* Mark the PE as type of PCI bus */
 		pe->type = EEH_PE_BUS;
 		edev->pe = pe;
-- 
cgit v1.2.3