From 2909060699226f70d731d9c242489418f7da4972 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 23 Feb 2012 20:18:57 -0700 Subject: mips/PCI: replace pci_probe_only with pci_flags Some architectures (alpha, mips, powerpc) have an arch-specific "pci_probe_only" flag. Others use PCI_PROBE_ONLY in pci_flags for the same purpose. This moves mips to the pci_flags approach so generic code can use the same test across all architectures. CC: Ralf Baechle CC: linux-mips@linux-mips.org Signed-off-by: Bjorn Helgaas --- arch/mips/include/asm/pci.h | 3 +-- arch/mips/pci/pci-bcm1480.c | 2 +- arch/mips/pci/pci-ip27.c | 2 +- arch/mips/pci/pci-lantiq.c | 3 ++- arch/mips/pci/pci-sb1250.c | 2 +- arch/mips/pci/pci-xlr.c | 2 +- arch/mips/pci/pci.c | 13 +++++-------- 7 files changed, 12 insertions(+), 15 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h index 576397c69920..1e4fa3da3f70 100644 --- a/arch/mips/include/asm/pci.h +++ b/arch/mips/include/asm/pci.h @@ -92,6 +92,7 @@ extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, #include #include #include +#include struct pci_dev; @@ -145,8 +146,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) #define arch_setup_msi_irqs arch_setup_msi_irqs #endif -extern int pci_probe_only; - extern char * (*pcibios_plat_setup)(char *str); #endif /* _ASM_PCI_H */ diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c index af8c31996965..37b52dc3d27e 100644 --- a/arch/mips/pci/pci-bcm1480.c +++ b/arch/mips/pci/pci-bcm1480.c @@ -204,7 +204,7 @@ static int __init bcm1480_pcibios_init(void) uint64_t reg; /* CFE will assign PCI resources */ - pci_probe_only = 1; + pci_set_flags(PCI_PROBE_ONLY); /* Avoid ISA compat ranges. */ PCIBIOS_MIN_IO = 0x00008000UL; diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index 193e9494f98e..0fbe4c0c170a 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -50,7 +50,7 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) bridge_t *bridge; int slot; - pci_probe_only = 1; + pci_set_flags(PCI_PROBE_ONLY); printk("a bridge\n"); diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c index be1e1afe12c3..030c77e7926e 100644 --- a/arch/mips/pci/pci-lantiq.c +++ b/arch/mips/pci/pci-lantiq.c @@ -270,7 +270,8 @@ static int __devinit ltq_pci_probe(struct platform_device *pdev) { struct ltq_pci_data *ltq_pci_data = (struct ltq_pci_data *) pdev->dev.platform_data; - pci_probe_only = 0; + + pci_clear_flags(PCI_PROBE_ONLY); ltq_pci_irq_map = ltq_pci_data->irq; ltq_pci_membase = ioremap_nocache(PCI_CR_BASE_ADDR, PCI_CR_SIZE); ltq_pci_mapped_cfg = diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c index 1711e8e101bc..dd97f3a83baa 100644 --- a/arch/mips/pci/pci-sb1250.c +++ b/arch/mips/pci/pci-sb1250.c @@ -213,7 +213,7 @@ static int __init sb1250_pcibios_init(void) uint64_t reg; /* CFE will assign PCI resources */ - pci_probe_only = 1; + pci_set_flags(PCI_PROBE_ONLY); /* Avoid ISA compat ranges. */ PCIBIOS_MIN_IO = 0x00008000UL; diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c index 3d701a962ef4..1644805a6730 100644 --- a/arch/mips/pci/pci-xlr.c +++ b/arch/mips/pci/pci-xlr.c @@ -292,7 +292,7 @@ int pcibios_plat_dev_init(struct pci_dev *dev) static int __init pcibios_init(void) { /* PSB assigns PCI resources */ - pci_probe_only = 1; + pci_set_flags(PCI_PROBE_ONLY); pci_config_base = ioremap(DEFAULT_PCI_CONFIG_BASE, 16 << 20); /* Extend IO port for memory mapped io */ diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index aec2b111d35b..2a1104512036 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -20,12 +20,9 @@ #include /* - * Indicate whether we respect the PCI setup left by the firmware. - * - * Make this long-lived so that we know when shutting down - * whether we probed only or not. + * If PCI_PROBE_ONLY in pci_flags is set, we don't change any PCI resource + * assignments. */ -int pci_probe_only; #define PCI_ASSIGN_ALL_BUSSES 1 @@ -92,7 +89,7 @@ static void __devinit pcibios_scanbus(struct pci_controller *hose) if (!hose->iommu) PCI_DMA_BUS_IS_PHYS = 1; - if (hose->get_busno && pci_probe_only) + if (hose->get_busno && pci_has_flag(PCI_PROBE_ONLY)) next_busno = (*hose->get_busno)(); pci_add_resource(&resources, hose->mem_resource); @@ -115,7 +112,7 @@ static void __devinit pcibios_scanbus(struct pci_controller *hose) need_domain_info = 1; } - if (!pci_probe_only) { + if (!pci_has_flag(PCI_PROBE_ONLY)) { pci_bus_size_bridges(bus); pci_bus_assign_resources(bus); pci_enable_bridges(bus); @@ -282,7 +279,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) struct list_head *ln; struct pci_dev *dev = bus->self; - if (pci_probe_only && dev && + if (pci_has_flag(PCI_PROBE_ONLY) && dev && (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { pci_read_bridge_bases(bus); pcibios_fixup_device_resources(dev, bus); -- cgit v1.2.3 From 14be538c566f6fd6f8c8abd1687aa5d36a600703 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 23 Feb 2012 20:18:57 -0700 Subject: mips/PCI: removed unused pci_probe configurability We never assign anything other than PCI_ASSIGN_ALL_BUSSES to pci_probe, so just remove the indirection. If configurability is required in the future, please use the pci_flags/PCI_REASSIGN_ALL_BUS functionality as is done for powerpc. CC: Ralf Baechle CC: linux-mips@linux-mips.org Signed-off-by: Bjorn Helgaas --- arch/mips/pci/pci.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 2a1104512036..19f6d194a568 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -24,10 +24,6 @@ * assignments. */ -#define PCI_ASSIGN_ALL_BUSSES 1 - -unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES; - /* * The PCI controller list. */ @@ -238,7 +234,7 @@ static int pcibios_enable_resources(struct pci_dev *dev, int mask) unsigned int pcibios_assign_all_busses(void) { - return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0; + return 1; } int pcibios_enable_device(struct pci_dev *dev, int mask) -- cgit v1.2.3 From 96a6b9ad05a2d5654f168d3ad9d9696d3b03a7c2 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 23 Feb 2012 20:19:02 -0700 Subject: mips/PCI: get rid of device resource fixups Tell the PCI core about host bridge address translation so it can take care of bus-to-resource conversion for us. Here's the wrinkle on Cobalt: we can't generate normal I/O port addresses on PCI because the GT-64111 doesn't do any address translation, so we have this: CPU I/O port addresses [io 0x0000-0xffffff] PCI bus I/O port addresses [io 0x10000000-0x10ffffff] Legacy-mode IDE controllers start out with the legacy bus addresses, e.g., 0x1f0, assigned by pci_setup_device(). These are outside the range of addresses GT-64111 can generate on PCI, but pcibios_fixup_device_resources() converted them to CPU addresses anyway by adding io_offset. Therefore, we had to pre-adjust them in cobalt_legacy_ide_fixup(). With io_offset = 0xf0000000, we had this: res->start = 0x1f0 initialized in pci_setup_device() res->start = 0x100001f0 -= io_offset in cobalt_legacy_ide_fixup() res->start = 0x1f0 += io_offset in pcibios_fixup_device_resources() The difference after this patch is that the generic pci_bus_to_resource() only adds the offset if the bus address is inside a host bridge window. Since 0x1f0 is not a valid bus address and is not inside any windows, it is unaffected, so we now have this: region->start = 0x1f0 initialized in pci_setup_device() res->start = 0x1f0 no offset by pci_bus_to_resource() That means we can remove both pcibios_fixup_device_resources() and cobalt_legacy_ide_fixup(). I would *rather* set the host bridge offset to zero (which corresponds to what the GT-64111 actually does), and have both CPU and PCI addresses of [io 0x10000000-0x10ffffff]. However, that would require changes to generic code that assumes legacy I/O addresses, such as pic1_io_resource ([io 0x0020-0x00021]), and we'd have to keep a Cobalt IDE fixup. Of course, none of this changes the fact that references to I/O port 0x1f0 actually go to port 0x100001f0, not 0x1f0, on the Cobalt PCI bus. Fortunately the VT82C586 IDE controller only decodes the low 24 address bits, so it does work. CC: Ralf Baechle CC: Yoichi Yuasa Signed-off-by: Bjorn Helgaas --- arch/mips/include/asm/pci.h | 6 +--- arch/mips/pci/fixup-cobalt.c | 61 -------------------------------------- arch/mips/pci/pci.c | 70 ++------------------------------------------ 3 files changed, 4 insertions(+), 133 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h index 1e4fa3da3f70..6420e8df4e45 100644 --- a/arch/mips/include/asm/pci.h +++ b/arch/mips/include/asm/pci.h @@ -113,11 +113,7 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, } #endif -extern void pcibios_resource_to_bus(struct pci_dev *dev, - struct pci_bus_region *region, struct resource *res); - -extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region); +#define ARCH_HAS_GENERIC_PCI_OFFSETS #define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c index acacd1407c63..9553b14002dd 100644 --- a/arch/mips/pci/fixup-cobalt.c +++ b/arch/mips/pci/fixup-cobalt.c @@ -51,67 +51,6 @@ static void qube_raq_galileo_early_fixup(struct pci_dev *dev) DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111, qube_raq_galileo_early_fixup); -static void __devinit cobalt_legacy_ide_resource_fixup(struct pci_dev *dev, - struct resource *res) -{ - struct pci_controller *hose = (struct pci_controller *)dev->sysdata; - unsigned long offset = hose->io_offset; - struct resource orig = *res; - - if (!(res->flags & IORESOURCE_IO) || - !(res->flags & IORESOURCE_PCI_FIXED)) - return; - - res->start -= offset; - res->end -= offset; - dev_printk(KERN_DEBUG, &dev->dev, "converted legacy %pR to bus %pR\n", - &orig, res); -} - -static void __devinit cobalt_legacy_ide_fixup(struct pci_dev *dev) -{ - u32 class; - u8 progif; - - /* - * If the IDE controller is in legacy mode, pci_setup_device() fills in - * the resources with the legacy addresses that normally appear on the - * PCI bus, just as if we had read them from a BAR. - * - * However, with the GT-64111, those legacy addresses, e.g., 0x1f0, - * will never appear on the PCI bus because it converts memory accesses - * in the PCI I/O region (which is never at address zero) into I/O port - * accesses with no address translation. - * - * For example, if GT_DEF_PCI0_IO_BASE is 0x10000000, a load or store - * to physical address 0x100001f0 will become a PCI access to I/O port - * 0x100001f0. There's no way to generate an access to I/O port 0x1f0, - * but the VT82C586 IDE controller does respond at 0x100001f0 because - * it only decodes the low 24 bits of the address. - * - * When this quirk runs, the pci_dev resources should contain bus - * addresses, not Linux I/O port numbers, so convert legacy addresses - * like 0x1f0 to bus addresses like 0x100001f0. Later, we'll convert - * them back with pcibios_fixup_bus() or pcibios_bus_to_resource(). - */ - class = dev->class >> 8; - if (class != PCI_CLASS_STORAGE_IDE) - return; - - pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); - if ((progif & 1) == 0) { - cobalt_legacy_ide_resource_fixup(dev, &dev->resource[0]); - cobalt_legacy_ide_resource_fixup(dev, &dev->resource[1]); - } - if ((progif & 4) == 0) { - cobalt_legacy_ide_resource_fixup(dev, &dev->resource[2]); - cobalt_legacy_ide_resource_fixup(dev, &dev->resource[3]); - } -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, - cobalt_legacy_ide_fixup); - static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev) { unsigned short cfgword; diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 19f6d194a568..0514866fa925 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -88,8 +88,9 @@ static void __devinit pcibios_scanbus(struct pci_controller *hose) if (hose->get_busno && pci_has_flag(PCI_PROBE_ONLY)) next_busno = (*hose->get_busno)(); - pci_add_resource(&resources, hose->mem_resource); - pci_add_resource(&resources, hose->io_resource); + pci_add_resource_offset(&resources, + hose->mem_resource, hose->mem_offset); + pci_add_resource_offset(&resources, hose->io_resource, hose->io_offset); bus = pci_scan_root_bus(NULL, next_busno, hose->pci_ops, hose, &resources); if (!bus) @@ -247,45 +248,13 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) return pcibios_plat_dev_init(dev); } -static void pcibios_fixup_device_resources(struct pci_dev *dev, - struct pci_bus *bus) -{ - /* Update device resources. */ - struct pci_controller *hose = (struct pci_controller *)bus->sysdata; - unsigned long offset = 0; - int i; - - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - if (!dev->resource[i].start) - continue; - if (dev->resource[i].flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (dev->resource[i].flags & IORESOURCE_MEM) - offset = hose->mem_offset; - - dev->resource[i].start += offset; - dev->resource[i].end += offset; - } -} - void __devinit pcibios_fixup_bus(struct pci_bus *bus) { - /* Propagate hose info into the subordinate devices. */ - - struct list_head *ln; struct pci_dev *dev = bus->self; if (pci_has_flag(PCI_PROBE_ONLY) && dev && (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { pci_read_bridge_bases(bus); - pcibios_fixup_device_resources(dev, bus); - } - - for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { - dev = pci_dev_b(ln); - - if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) - pcibios_fixup_device_resources(dev, bus); } } @@ -295,40 +264,7 @@ pcibios_update_irq(struct pci_dev *dev, int irq) pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); } -void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res) -{ - struct pci_controller *hose = (struct pci_controller *)dev->sysdata; - unsigned long offset = 0; - - if (res->flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (res->flags & IORESOURCE_MEM) - offset = hose->mem_offset; - - region->start = res->start - offset; - region->end = res->end - offset; -} - -void __devinit -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) -{ - struct pci_controller *hose = (struct pci_controller *)dev->sysdata; - unsigned long offset = 0; - - if (res->flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (res->flags & IORESOURCE_MEM) - offset = hose->mem_offset; - - res->start = region->start + offset; - res->end = region->end + offset; -} - #ifdef CONFIG_HOTPLUG -EXPORT_SYMBOL(pcibios_resource_to_bus); -EXPORT_SYMBOL(pcibios_bus_to_resource); EXPORT_SYMBOL(PCIBIOS_MIN_IO); EXPORT_SYMBOL(PCIBIOS_MIN_MEM); #endif -- cgit v1.2.3 From fb127cb9de791d62fb393d6e65fa9869bddd2460 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 23 Feb 2012 20:19:04 -0700 Subject: PCI: collapse pcibios_resource_to_bus Everybody uses the generic pcibios_resource_to_bus() supplied by the core now, so remove the ARCH_HAS_GENERIC_PCI_OFFSETS used during conversion. Signed-off-by: Bjorn Helgaas --- arch/mips/include/asm/pci.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h index 6420e8df4e45..fcd4060f6421 100644 --- a/arch/mips/include/asm/pci.h +++ b/arch/mips/include/asm/pci.h @@ -113,8 +113,6 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, } #endif -#define ARCH_HAS_GENERIC_PCI_OFFSETS - #define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index static inline int pci_proc_domain(struct pci_bus *bus) -- cgit v1.2.3