From 6a8dfe1cac5c591aecf88b38b8f4b206ee636761 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 14 Oct 2009 17:38:26 +0200 Subject: microblaze: support U-BOOT image format Two version are generated. linux.bin.ub which is created from linux.bin file and simpleImage..ub which is created from stripped simpleImage. file Load address and entry point is for microblaze first instruction which is CONFIG_KERNEL_BASE_ADDR variable. There is possible for simpleImage format parse _start symbol too. simpleImage. is still stripped elf file I cleared simpleImage..unstrip file because there are so big. Signed-off-by: Michal Simek --- arch/microblaze/boot/Makefile | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'arch/microblaze') diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile index 21f13322a4ca..902cf9846c3c 100644 --- a/arch/microblaze/boot/Makefile +++ b/arch/microblaze/boot/Makefile @@ -2,11 +2,13 @@ # arch/microblaze/boot/Makefile # +MKIMAGE := $(srctree)/scripts/mkuboot.sh + obj-y += linked_dtb.o targets := linux.bin linux.bin.gz simpleImage.% -OBJCOPYFLAGS_linux.bin := -O binary +OBJCOPYFLAGS := -O binary # Where the DTS files live dtstree := $(srctree)/$(src)/dts @@ -24,6 +26,7 @@ $(obj)/linux.bin: vmlinux FORCE [ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \ touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image" $(call if_changed,objcopy) + $(call if_changed,uimage) @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' $(obj)/linux.bin.gz: $(obj)/linux.bin FORCE @@ -36,8 +39,16 @@ quiet_cmd_cp = CP $< $@$2 quiet_cmd_strip = STRIP $@ cmd_strip = $(STRIP) -K _start -K _end -K __log_buf -K _fdt_start vmlinux -o $@ +quiet_cmd_uimage = UIMAGE $@.ub + cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A microblaze -O linux -T kernel \ + -C none -n 'Linux-$(KERNELRELEASE)' \ + -a $(CONFIG_KERNEL_BASE_ADDR) -e $(CONFIG_KERNEL_BASE_ADDR) \ + -d $@ $@.ub + $(obj)/simpleImage.%: vmlinux FORCE $(call if_changed,cp,.unstrip) + $(call if_changed,objcopy) + $(call if_changed,uimage) $(call if_changed,strip) @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' @@ -53,4 +64,4 @@ $(obj)/%.dtb: $(dtstree)/%.dts FORCE clean-kernel += linux.bin linux.bin.gz simpleImage.* -clean-files += *.dtb +clean-files += *.dtb simpleImage.*.unstrip -- cgit v1.2.3