From eb0bbba7636b9fc81939d6087a5fe575e150c95a Mon Sep 17 00:00:00 2001 From: Marco Felsch Date: Thu, 16 Jan 2020 15:01:08 +0100 Subject: ARM: dts: imx6: phycore-som: fix emmc supply Currently the vmmc is supplied by the 1.8V pmic rail but this is wrong. The default module behaviour is to power VCCQ and VCC by the 3.3V power rail. Optional the user can connect the VCCQ to the pmic 1.8V emmc power rail using a solder jumper. Fixes: ddec5d1c0047 ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM") Signed-off-by: Marco Felsch Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi index 978dc1c2ff1b..4d18952658f8 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi @@ -192,7 +192,6 @@ pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <8>; non-removable; - vmmc-supply = <&vdd_emmc_1p8>; status = "disabled"; }; -- cgit v1.2.3 From 512a928affd51c2dc631401e56ad5ee5d5dd68b6 Mon Sep 17 00:00:00 2001 From: Ahmad Fatoum Date: Thu, 16 Jan 2020 15:18:49 +0100 Subject: ARM: imx: build v7_cpu_resume() unconditionally This function is not only needed by the platform suspend code, but is also reused as the CPU resume function when the ARM cores can be powered down completely in deep idle, which is the case on i.MX6SX and i.MX6UL(L). Providing the static inline stub whenever CONFIG_SUSPEND is disabled means that those platforms will hang on resume from cpuidle if suspend is disabled. So there are two problems: - The static inline stub masks the linker error - The function is not available where needed Fix both by just building the function unconditionally, when CONFIG_SOC_IMX6 is enabled. The actual code is three instructions long, so it's arguably ok to just leave it in for all i.MX6 kernel configurations. Fixes: 05136f0897b5 ("ARM: imx: support arm power off in cpuidle for i.mx6sx") Signed-off-by: Lucas Stach Signed-off-by: Ahmad Fatoum Signed-off-by: Rouven Czerwinski Signed-off-by: Shawn Guo --- arch/arm/mach-imx/Makefile | 2 ++ arch/arm/mach-imx/common.h | 4 ++-- arch/arm/mach-imx/resume-imx6.S | 24 ++++++++++++++++++++++++ arch/arm/mach-imx/suspend-imx6.S | 14 -------------- 4 files changed, 28 insertions(+), 16 deletions(-) create mode 100644 arch/arm/mach-imx/resume-imx6.S (limited to 'arch/arm') diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 35ff620537e6..03506ce46149 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -91,6 +91,8 @@ AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o endif +AFLAGS_resume-imx6.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SOC_IMX6) += resume-imx6.o obj-$(CONFIG_SOC_IMX6) += pm-imx6.o obj-$(CONFIG_SOC_IMX1) += mach-imx1.o diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 912aeceb4ff8..5aa5796cff0e 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -109,17 +109,17 @@ void imx_cpu_die(unsigned int cpu); int imx_cpu_kill(unsigned int cpu); #ifdef CONFIG_SUSPEND -void v7_cpu_resume(void); void imx53_suspend(void __iomem *ocram_vbase); extern const u32 imx53_suspend_sz; void imx6_suspend(void __iomem *ocram_vbase); #else -static inline void v7_cpu_resume(void) {} static inline void imx53_suspend(void __iomem *ocram_vbase) {} static const u32 imx53_suspend_sz; static inline void imx6_suspend(void __iomem *ocram_vbase) {} #endif +void v7_cpu_resume(void); + void imx6_pm_ccm_init(const char *ccm_compat); void imx6q_pm_init(void); void imx6dl_pm_init(void); diff --git a/arch/arm/mach-imx/resume-imx6.S b/arch/arm/mach-imx/resume-imx6.S new file mode 100644 index 000000000000..5bd1ba7ef15b --- /dev/null +++ b/arch/arm/mach-imx/resume-imx6.S @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + */ + +#include +#include +#include +#include +#include "hardware.h" + +/* + * The following code must assume it is running from physical address + * where absolute virtual addresses to the data section have to be + * turned into relative ones. + */ + +ENTRY(v7_cpu_resume) + bl v7_invalidate_l1 +#ifdef CONFIG_CACHE_L2X0 + bl l2c310_early_resume +#endif + b cpu_resume +ENDPROC(v7_cpu_resume) diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index 062391ff13da..1eabf2d2834b 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -327,17 +327,3 @@ resume: ret lr ENDPROC(imx6_suspend) - -/* - * The following code must assume it is running from physical address - * where absolute virtual addresses to the data section have to be - * turned into relative ones. - */ - -ENTRY(v7_cpu_resume) - bl v7_invalidate_l1 -#ifdef CONFIG_CACHE_L2X0 - bl l2c310_early_resume -#endif - b cpu_resume -ENDPROC(v7_cpu_resume) -- cgit v1.2.3 From 54d6477dca3b65b7b77a903fe60a9447bc836e7f Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Sun, 19 Jan 2020 10:09:32 +0000 Subject: ARM: dts: imx7d: fix opp-supported-hw Per i.MX7D Document Number: IMX7DCEC Rev. 6, 03/2019, there are only consumer/industrial parts, and 1.2GHz is only support in consumer parts. So exclude automotive from 792/996MHz/1.2GHz and exclude industrial from 1.2GHz. Fixes: d7bfba7296ca ("ARM: dts: imx7d: Update cpufreq OPP table") Cc: Leonard Crestez Signed-off-by: Peng Fan Reviewed-by: Leonard Crestez Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 92f6d0c2a74f..4c22828df55f 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -44,7 +44,7 @@ opp-hz = /bits/ 64 <792000000>; opp-microvolt = <1000000>; clock-latency-ns = <150000>; - opp-supported-hw = <0xd>, <0xf>; + opp-supported-hw = <0xd>, <0x7>; opp-suspend; }; @@ -52,7 +52,7 @@ opp-hz = /bits/ 64 <996000000>; opp-microvolt = <1100000>; clock-latency-ns = <150000>; - opp-supported-hw = <0xc>, <0xf>; + opp-supported-hw = <0xc>, <0x7>; opp-suspend; }; @@ -60,7 +60,7 @@ opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1225000>; clock-latency-ns = <150000>; - opp-supported-hw = <0x8>, <0xf>; + opp-supported-hw = <0x8>, <0x3>; opp-suspend; }; }; -- cgit v1.2.3 From 7155c44624d061692b4c13aa8343f119c67d4fc0 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Sun, 26 Jan 2020 21:49:50 +0200 Subject: ARM: dts: ls1021a: Restore MDIO compatible to gianfar The difference between "fsl,etsec2-mdio" and "gianfar" has to do with the .get_tbipa function, which calculates the address of the TBIPA register automatically, if not explicitly specified. [ see drivers/net/ethernet/freescale/fsl_pq_mdio.c ]. On LS1021A, the TBIPA register is at offset 0x30 within the port register block, which is what the "gianfar" method of calculating addresses actually does. Luckily, the bad "compatible" is inconsequential for ls1021a.dtsi, because the TBIPA register is explicitly specified via the second "reg" (<0x0 0x2d10030 0x0 0x4>), so the "get_tbipa" function is dead code. Nonetheless it's good to restore it to its correct value. Background discussion: https://www.spinics.net/lists/stable/msg361156.html Fixes: c7861adbe37f ("ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect") Reported-by: Pavel Machek Signed-off-by: Vladimir Oltean Signed-off-by: Shawn Guo --- arch/arm/boot/dts/ls1021a.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 0855b1fe98e0..760a68c163c8 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -747,7 +747,7 @@ }; mdio0: mdio@2d24000 { - compatible = "fsl,etsec2-mdio"; + compatible = "gianfar"; device_type = "mdio"; #address-cells = <1>; #size-cells = <0>; @@ -756,7 +756,7 @@ }; mdio1: mdio@2d64000 { - compatible = "fsl,etsec2-mdio"; + compatible = "gianfar"; device_type = "mdio"; #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From bcbf53a0dab50980867476994f6079c1ec5bb3a3 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 12 Feb 2020 11:46:29 +0100 Subject: ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties The sram-node compatible properties have mistakingly combined the model-specific string with the generic "mtd-ram" string. Note that neither "cy7c1019dv33-10zsxi, mtd-ram" or "cy7c1019dv33-10zsxi" are used by any in-kernel driver and they are not present in any binding. The physmap driver will however bind to platform devices that specify "mtd-ram". Fixes: fc48e76489fd ("ARM: dts: imx6: Add support for Toradex Colibri iMX6 module") Cc: Sanchayan Maity Cc: Marcel Ziswiler Cc: Shawn Guo Signed-off-by: Johan Hovold Reviewed-by: Oleksandr Suvorov Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index cd075621de52..84fcc203a2e4 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -275,7 +275,7 @@ /* SRAM on Colibri nEXT_CS0 */ sram@0,0 { - compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; + compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram"; reg = <0 0 0x00010000>; #address-cells = <1>; #size-cells = <1>; @@ -286,7 +286,7 @@ /* SRAM on Colibri nEXT_CS1 */ sram@1,0 { - compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; + compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram"; reg = <1 0 0x00010000>; #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From 2773fe1d31c42ffae2a9cb9a6055d99dd86e2fee Mon Sep 17 00:00:00 2001 From: Oleksandr Suvorov Date: Wed, 19 Feb 2020 13:11:24 +0000 Subject: ARM: dts: imx7-colibri: Fix frequency for sd/mmc SD/MMC on Colibri iMX7S/D modules successfully support 200Mhz frequency in HS200 mode. Removing the unnecessary max-frequency limit significantly increases the performance: == before fix ==== root@colibri-imx7-emmc:~# hdparm -t /dev/mmcblk0 /dev/mmcblk0: Timing buffered disk reads: 252 MB in 3.02 seconds = 83.54 MB/sec ================== === after fix ==== root@colibri-imx7-emmc:~# hdparm -t /dev/mmcblk0 /dev/mmcblk0: Timing buffered disk reads: 408 MB in 3.00 seconds = 135.94 MB/sec ================== Fixes: f928a4a377e4 ("ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support") Signed-off-by: Oleksandr Suvorov Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7-colibri.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index d05be3f0e2a7..04717cf69db0 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -336,7 +336,6 @@ assigned-clock-rates = <400000000>; bus-width = <8>; fsl,tuning-step = <2>; - max-frequency = <100000000>; vmmc-supply = <®_module_3v3>; vqmmc-supply = <®_DCDC3>; non-removable; -- cgit v1.2.3