From ac6908b3049397b10bcfd8143d79cbdbbd266f02 Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Wed, 6 Apr 2016 14:52:53 +0200 Subject: ARM: dts: r8a7791: Don't disable referenced optional clocks clk_get on a disabled clock node will return EPROBE_DEFER, which can cause drivers to be deferred forever if such clocks are referenced in their clocks property. Update the various disabled external clock nodes to default to a frequency of 0, but don't disable them to prevent this. Signed-off-by: Sjoerd Simons Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-koelsch.dts | 1 + arch/arm/boot/dts/r8a7791-porter.dts | 1 + arch/arm/boot/dts/r8a7791.dtsi | 5 +---- 3 files changed, 3 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 0ad71b81d3a2..cc6e28f81fe4 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -661,6 +661,7 @@ }; &pcie_bus_clk { + clock-frequency = <100000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 6c08314427d6..76c5b2ef8b7e 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -414,6 +414,7 @@ }; &pcie_bus_clk { + clock-frequency = <100000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 6439f0569fe2..1cd1b6a3a72a 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1083,9 +1083,8 @@ pcie_bus_clk: pcie_bus_clk { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <100000000>; + clock-frequency = <0>; clock-output-names = "pcie_bus"; - status = "disabled"; }; /* External SCIF clock */ @@ -1094,7 +1093,6 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - status = "disabled"; }; /* External USB clock - can be overridden by the board */ @@ -1112,7 +1110,6 @@ /* This value must be overridden by the board. */ clock-frequency = <0>; clock-output-names = "can_clk"; - status = "disabled"; }; /* Special CPG clocks */ -- cgit v1.2.3 From 01638a7f5ef967e94e8aff455874d62e12fe32ed Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Wed, 6 Apr 2016 21:32:06 +0200 Subject: Revert "ARM: dts: porter: Enable SCIF_CLK frequency and pins" This reverts commit 19417bd9c511 ("ARM: dts: porter: Enable SCIF_CLK frequency and pins") as according to http://elinux.org/File:R-CarM2-KOELSCH_PORTER-B_PORTER_C_Comparison.pdf the external oscillator for SCIF_CLK is not mounted on the porter boards. Signed-off-by: Sjoerd Simons Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-porter.dts | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 76c5b2ef8b7e..a9285d9a57cd 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -143,19 +143,11 @@ }; &pfc { - pinctrl-0 = <&scif_clk_pins>; - pinctrl-names = "default"; - scif0_pins: serial0 { renesas,groups = "scif0_data_d"; renesas,function = "scif0"; }; - scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; - }; - ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -229,11 +221,6 @@ status = "okay"; }; -&scif_clk { - clock-frequency = <14745600>; - status = "okay"; -}; - ðer { pinctrl-0 = <ðer_pins &phy1_pins>; pinctrl-names = "default"; -- cgit v1.2.3 From c531fb27e9699eaee478ee5686a3cca5dee73602 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 11 Jan 2016 19:41:12 +0100 Subject: ARM: shmobile: timer: Fix preset_lpj leading to too short delays On all shmobile ARM SoCs, loop-based delays may complete early, which can be after only 1/3 (Cortex A9) or 1/2 (Cortex A7 or A15) of the minimum required time. This is caused by calculating preset_lpj based on incorrect assumptions about the number of clock cycles per loop: - All of Cortex A7, A9, and A15 run __loop_delay() at 1 loop per CPU clock cycle, - As of commit 11d4bb1bd067f9d0 ("ARM: 7907/1: lib: delay-loop: Add align directive to fix BogoMIPS calculation"), Cortex A8 runs __loop_delay() at 1 loop per 2 instead of 3 CPU clock cycles. On SoCs with Cortex A7 and/or A15 CPU cores, this went unnoticed, as delays use the ARM arch timer if available. R-Car Gen2 doesn't work if the arch timer is disabled. However, APE6 can be used without the arch timer. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/timer.c | 28 +++++++++++----------------- 1 file changed, 11 insertions(+), 17 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index ad008e4b0c49..67d79f9c6bad 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -40,8 +40,7 @@ static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz, void __init shmobile_init_delay(void) { struct device_node *np, *cpus; - bool is_a7_a8_a9 = false; - bool is_a15 = false; + unsigned int div = 0; bool has_arch_timer = false; u32 max_freq = 0; @@ -55,27 +54,22 @@ void __init shmobile_init_delay(void) if (!of_property_read_u32(np, "clock-frequency", &freq)) max_freq = max(max_freq, freq); - if (of_device_is_compatible(np, "arm,cortex-a8") || - of_device_is_compatible(np, "arm,cortex-a9")) { - is_a7_a8_a9 = true; - } else if (of_device_is_compatible(np, "arm,cortex-a7")) { - is_a7_a8_a9 = true; - has_arch_timer = true; - } else if (of_device_is_compatible(np, "arm,cortex-a15")) { - is_a15 = true; + if (of_device_is_compatible(np, "arm,cortex-a8")) { + div = 2; + } else if (of_device_is_compatible(np, "arm,cortex-a9")) { + div = 1; + } else if (of_device_is_compatible(np, "arm,cortex-a7") || + of_device_is_compatible(np, "arm,cortex-a15")) { + div = 1; has_arch_timer = true; } } of_node_put(cpus); - if (!max_freq) + if (!max_freq || !div) return; - if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) { - if (is_a7_a8_a9) - shmobile_setup_delay_hz(max_freq, 1, 3); - else if (is_a15) - shmobile_setup_delay_hz(max_freq, 2, 4); - } + if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) + shmobile_setup_delay_hz(max_freq, 1, div); } -- cgit v1.2.3