From 78d80c5a720ea370defa3e3124c0f7f7179bdfe5 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 23 May 2012 21:18:46 +0200 Subject: serial/amba-pl011: move custom pin control to driver We had a boot regression in Ux500 in the merge window because two orthogonal pin control schemes for the PL011 were merged at the same time: - One using the .init() and .exit() hooks into the platform for Ux500 putting the pins into default vs sleep state respectively as the port was started/stopped. commit a09806607fd20bed2f8c41fe22793386790a14aa "ARM: ux500: switch to using pinctrl for uart0" - One hogging the default setting at PL011 probe() commit 258e055111d3cde2607e0d04eb91da2f7a59b591 "serial: amba-pl011: adopt pinctrl support" To get a solution that works for both let's scrap the stuff in the platform callbacks, instead have the driver itself select default and sleep states when the port is started/stopped. Hopefully this works for all clients. Platform callbacks are bad for device tree migration anyway, so this rids us of another problem in Ux500. Cc: Shawn Guo Cc: Russell King Reported-by: Lee Jones Signed-off-by: Linus Walleij Tested-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-ux500/board-mop500.c | 54 +------------------------------------- 1 file changed, 1 insertion(+), 53 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 9c74ac545849..1509a3cb5833 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -580,43 +580,12 @@ static void ux500_uart0_reset(void) udelay(1); } -/* This needs to be referenced by callbacks */ -struct pinctrl *u0_p; -struct pinctrl_state *u0_def; -struct pinctrl_state *u0_sleep; - -static void ux500_uart0_init(void) -{ - int ret; - - if (IS_ERR(u0_p) || IS_ERR(u0_def)) - return; - - ret = pinctrl_select_state(u0_p, u0_def); - if (ret) - pr_err("could not set UART0 defstate\n"); -} - -static void ux500_uart0_exit(void) -{ - int ret; - - if (IS_ERR(u0_p) || IS_ERR(u0_sleep)) - return; - - ret = pinctrl_select_state(u0_p, u0_sleep); - if (ret) - pr_err("could not set UART0 idlestate\n"); -} - static struct amba_pl011_data uart0_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart0_dma_cfg_rx, .dma_tx_param = &uart0_dma_cfg_tx, #endif - .init = ux500_uart0_init, - .exit = ux500_uart0_exit, .reset = ux500_uart0_reset, }; @@ -638,28 +607,7 @@ static struct amba_pl011_data uart2_plat = { static void __init mop500_uart_init(struct device *parent) { - struct amba_device *uart0_device; - - uart0_device = db8500_add_uart0(parent, &uart0_plat); - if (uart0_device) { - u0_p = pinctrl_get(&uart0_device->dev); - if (IS_ERR(u0_p)) - dev_err(&uart0_device->dev, - "could not get UART0 pinctrl\n"); - else { - u0_def = pinctrl_lookup_state(u0_p, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(u0_def)) { - dev_err(&uart0_device->dev, - "could not get UART0 defstate\n"); - } - u0_sleep = pinctrl_lookup_state(u0_p, - PINCTRL_STATE_SLEEP); - if (IS_ERR(u0_sleep)) - dev_err(&uart0_device->dev, - "could not get UART0 idlestate\n"); - } - } + db8500_add_uart0(parent, &uart0_plat); db8500_add_uart1(parent, &uart1_plat); db8500_add_uart2(parent, &uart2_plat); } -- cgit v1.2.3