From a849088aa1552b1a28eea3daff599ee22a734ae3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 25 Aug 2012 09:03:15 +0100 Subject: ARM: Fix ioremap() of address zero Murali Nalajala reports a regression that ioremapping address zero results in an oops dump: Unable to handle kernel paging request at virtual address fa200000 pgd = d4f80000 [fa200000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-g3b5f728-00009-g638207a #13) PC is at msm_pm_config_rst_vector_before_pc+0x8/0x30 LR is at msm_pm_boot_config_before_pc+0x18/0x20 pc : [] lr : [] psr: a0000093 sp : c0837ef0 ip : cfe00000 fp : 0000000d r10: da7efc17 r9 : 225c4278 r8 : 00000006 r7 : 0003c000 r6 : c085c824 r5 : 00000001 r4 : fa101000 r3 : fa200000 r2 : c095080c r1 : 002250fc r0 : 00000000 Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 25180059 DAC: 00000015 [] (msm_pm_config_rst_vector_before_pc+0x8/0x30) from [] (msm_pm_boot_config_before_pc+0x18/0x20) [] (msm_pm_boot_config_before_pc+0x18/0x20) from [] (msm_pm_power_collapse+0x410/0xb04) [] (msm_pm_power_collapse+0x410/0xb04) from [] (arch_idle+0x294/0x3e0) [] (arch_idle+0x294/0x3e0) from [] (default_idle+0x18/0x2c) [] (default_idle+0x18/0x2c) from [] (cpu_idle+0x90/0xe4) [] (cpu_idle+0x90/0xe4) from [] (rest_init+0x88/0xa0) [] (rest_init+0x88/0xa0) from [] (start_kernel+0x3a8/0x40c) Code: c0704256 e12fff1e e59f2020 e5923000 (e5930000) This is caused by the 'reserved' entries which we insert (see 19b52abe3c5d7 - ARM: 7438/1: fill possible PMD empty section gaps) which get matched for physical address zero. Resolve this by marking these reserved entries with a different flag. Cc: Tested-by: Murali Nalajala Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mm/mm.h | 3 +++ arch/arm/mm/mmu.c | 4 ++-- 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 6776160618ef..a8ee92da3544 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -55,6 +55,9 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page /* permanent static mappings from iotable_init() */ #define VM_ARM_STATIC_MAPPING 0x40000000 +/* empty mapping */ +#define VM_ARM_EMPTY_MAPPING 0x20000000 + /* mapping type (attributes) for permanent static mappings */ #define VM_ARM_MTYPE(mt) ((mt) << 20) #define VM_ARM_MTYPE_MASK (0x1f << 20) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4c2d0451e84a..eab94bc6f805 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -807,7 +807,7 @@ static void __init pmd_empty_section_gap(unsigned long addr) vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm)); vm->addr = (void *)addr; vm->size = SECTION_SIZE; - vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; + vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING; vm->caller = pmd_empty_section_gap; vm_area_add_early(vm); } @@ -820,7 +820,7 @@ static void __init fill_pmd_gaps(void) /* we're still single threaded hence no lock needed here */ for (vm = vmlist; vm; vm = vm->next) { - if (!(vm->flags & VM_ARM_STATIC_MAPPING)) + if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING))) continue; addr = (unsigned long)vm->addr; if (addr < next) -- cgit v1.2.3 From bf8801145c01ab600f8df66e8c879ac642fa5846 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 16 Aug 2012 18:55:44 +0100 Subject: ARM: 7496/1: hw_breakpoint: don't rely on dfsr to show watchpoint access type From ARM debug architecture v7.1 onwards, a watchpoint exception causes the DFAR to be updated with the faulting data address. However, DFSR.WnR takes an UNKNOWN value and therefore cannot be used in general to determine the access type that triggered the watchpoint. This patch forbids watchpoints without an overflow handler from specifying a specific access type (load/store). Those with overflow handlers must be able to handle false positives potentially triggered by a watchpoint of a different access type on the same address. For SIGTRAP-based handlers (i.e. ptrace), this should have no impact. Cc: Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/hw_breakpoint.c | 55 ++++++++++++++++++++++++++++++----------- 1 file changed, 40 insertions(+), 15 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index ba386bd94107..18d39ea4c02f 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -159,6 +159,12 @@ static int debug_arch_supported(void) arch >= ARM_DEBUG_ARCH_V7_1; } +/* Can we determine the watchpoint access type from the fsr? */ +static int debug_exception_updates_fsr(void) +{ + return 0; +} + /* Determine number of WRP registers available. */ static int get_num_wrp_resources(void) { @@ -619,18 +625,35 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) info->address &= ~alignment_mask; info->ctrl.len <<= offset; - /* - * Currently we rely on an overflow handler to take - * care of single-stepping the breakpoint when it fires. - * In the case of userspace breakpoints on a core with V7 debug, - * we can use the mismatch feature as a poor-man's hardware - * single-step, but this only works for per-task breakpoints. - */ - if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) || - !core_has_mismatch_brps() || !bp->hw.bp_target)) { - pr_warning("overflow handler required but none found\n"); - ret = -EINVAL; + if (!bp->overflow_handler) { + /* + * Mismatch breakpoints are required for single-stepping + * breakpoints. + */ + if (!core_has_mismatch_brps()) + return -EINVAL; + + /* We don't allow mismatch breakpoints in kernel space. */ + if (arch_check_bp_in_kernelspace(bp)) + return -EPERM; + + /* + * Per-cpu breakpoints are not supported by our stepping + * mechanism. + */ + if (!bp->hw.bp_target) + return -EINVAL; + + /* + * We only support specific access types if the fsr + * reports them. + */ + if (!debug_exception_updates_fsr() && + (info->ctrl.type == ARM_BREAKPOINT_LOAD || + info->ctrl.type == ARM_BREAKPOINT_STORE)) + return -EINVAL; } + out: return ret; } @@ -706,10 +729,12 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr, goto unlock; /* Check that the access type matches. */ - access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W : - HW_BREAKPOINT_R; - if (!(access & hw_breakpoint_type(wp))) - goto unlock; + if (debug_exception_updates_fsr()) { + access = (fsr & ARM_FSR_ACCESS_MASK) ? + HW_BREAKPOINT_W : HW_BREAKPOINT_R; + if (!(access & hw_breakpoint_type(wp))) + goto unlock; + } /* We have a winner. */ info->trigger = addr; -- cgit v1.2.3 From d968d2b801d877601d54e35e6dd0f52d9c797c99 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 16 Aug 2012 19:02:12 +0100 Subject: ARM: 7497/1: hw_breakpoint: allow single-byte watchpoints on all addresses Breakpoint validation currently fails for single-byte watchpoints on addresses ending in 11b. There is no reason to forbid such a watchpoint, so extend the validation code to allow it. Cc: Ulrich Weigand Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/hw_breakpoint.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 18d39ea4c02f..281bf3301241 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -610,13 +610,14 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) /* Aligned */ break; case 1: - /* Allow single byte watchpoint. */ - if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) - break; case 2: /* Allow halfword watchpoints and breakpoints. */ if (info->ctrl.len == ARM_BREAKPOINT_LEN_2) break; + case 3: + /* Allow single byte watchpoint. */ + if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) + break; default: ret = -EINVAL; goto out; -- cgit v1.2.3 From dbece45894d3ab1baac15a96dc4e1e8e23f64a93 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 24 Aug 2012 15:20:59 +0100 Subject: ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores When enabling the MMU for ARMv7 CPUs, the decompressor does not touch the ttbcr register, assuming that it will be zeroed (N == 0, EAE == 0). Given that only EAE is defined as 0 for non-secure copies of the register (and a bootloader such as kexec may leave it set to 1 anyway), we should ensure that we reset the register ourselves before turning on the MMU. This patch zeroes TTBCR.EAE and TTBCR.N prior to enabling the MMU for ARMv7 cores in the decompressor, configuring us exclusively for 32-bit translation tables via TTBR0. Cc: Acked-by: Nicolas Pitre Signed-off-by: Matthew Leach Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/boot/compressed/head.S | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index b8c64b80bafc..81769c1341fa 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -659,10 +659,14 @@ __armv7_mmu_cache_on: #ifdef CONFIG_CPU_ENDIAN_BE8 orr r0, r0, #1 << 25 @ big-endian page tables #endif + mrcne p15, 0, r6, c2, c0, 2 @ read ttb control reg orrne r0, r0, #1 @ MMU enabled movne r1, #0xfffffffd @ domain 0 = client + bic r6, r6, #1 << 31 @ 32-bit translation system + bic r6, r6, #3 << 0 @ use only ttbr0 mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer mcrne p15, 0, r1, c3, c0, 0 @ load domain access control + mcrne p15, 0, r6, c2, c0, 2 @ load ttb control #endif mcr p15, 0, r0, c7, c5, 4 @ ISB mcr p15, 0, r0, c1, c0, 0 @ load control register -- cgit v1.2.3 From ae3790b8a916429be5fa61da95992929e6b34d64 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 24 Aug 2012 15:21:52 +0100 Subject: ARM: 7502/1: contextidr: avoid using bfi instruction during notifier The bfi instruction is not available on ARMv6, so instead use an and/orr sequence in the contextidr_notifier. This gets rid of the assembler error: Assembler messages: Error: selected processor does not support ARM mode `bfi r3,r2,#0,#8' Reported-by: Arnd Bergmann Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/context.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 119bc52ab93e..4e07eec1270d 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -63,10 +63,11 @@ static int contextidr_notifier(struct notifier_block *unused, unsigned long cmd, pid = task_pid_nr(thread->task) << ASID_BITS; asm volatile( " mrc p15, 0, %0, c13, c0, 1\n" - " bfi %1, %0, #0, %2\n" - " mcr p15, 0, %1, c13, c0, 1\n" + " and %0, %0, %2\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c13, c0, 1\n" : "=r" (contextidr), "+r" (pid) - : "I" (ASID_BITS)); + : "I" (~ASID_MASK)); isb(); return NOTIFY_OK; -- cgit v1.2.3 From df547e08e800275a431e560a7f0a6b6f24ab2904 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 24 Aug 2012 15:23:06 +0100 Subject: ARM: 7503/1: mm: only flush both pmd entries for classic MMU LPAE does not use two pmd entries for a pte, so the additional tlb flushing is not required. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/tlb.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 314d4664eae7..99a19512ee26 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -199,6 +199,9 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, { pgtable_page_dtor(pte); +#ifdef CONFIG_ARM_LPAE + tlb_add_flush(tlb, addr); +#else /* * With the classic ARM MMU, a pte page has two corresponding pmd * entries, each covering 1MB. @@ -206,6 +209,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, addr &= PMD_MASK; tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE); tlb_add_flush(tlb, addr + SZ_1M); +#endif tlb_remove_page(tlb, pte); } -- cgit v1.2.3 From 36418c516b31bff4ff949c7c618430a1a514debe Mon Sep 17 00:00:00 2001 From: Jonathan Austin Date: Thu, 23 Aug 2012 14:02:59 +0100 Subject: ARM: 7499/1: mm: Fix vmalloc overlap check for !HIGHMEM With !HIGHMEM, sanity_check_meminfo checks for banks that completely or partially overlap the vmalloc region. The test for partial overlap checks __va(bank->start + bank->size) > vmalloc_min. This is not appropriate if there is a non-linear translation between virtual and physical addresses, as bank->start + bank->size is actually in the bank following the one being interrogated. In most cases, even when using SPARSEMEM, this is not problematic as the subsequent bank will start at a higher va than the one in question. However if the physical to virtual address conversion is not monotonic increasing, the incorrect test could result in a bank not being truncated when it should be. This patch ensures we perform the va-pa conversion on memory from the bank we are interested in, not the following one. Reported-by: ??? (Steve) Signed-off-by: Jonathan Austin Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index eab94bc6f805..c2fa21d0103e 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -961,8 +961,8 @@ void __init sanity_check_meminfo(void) * Check whether this memory bank would partially overlap * the vmalloc area. */ - if (__va(bank->start + bank->size) > vmalloc_min || - __va(bank->start + bank->size) < __va(bank->start)) { + if (__va(bank->start + bank->size - 1) >= vmalloc_min || + __va(bank->start + bank->size - 1) <= __va(bank->start)) { unsigned long newsize = vmalloc_min - __va(bank->start); printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx " "to -%.8llx (vmalloc region overlap).\n", -- cgit v1.2.3 From b4ad51559c2f12c34a0340b26ffb02e4b285bc51 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 4 Sep 2012 20:04:35 +0100 Subject: ARM: 7512/1: Fix XIP build due to PHYS_OFFSET definition moving During the p2v changes, the PHYS_OFFSET #define moved into a !__ASSEMBLY__ section. This causes a XIP build to fail with arch/arm/kernel/head.o: In function 'stext': arch/arm/kernel/head.S:146: undefined reference to 'PHYS_OFFSET' Momentarily leave the #ifndef __ASSEMBLY__ section so we can define PHYS_OFFSET for all compilation units. Signed-off-by: Stephen Boyd Signed-off-by: Russell King --- arch/arm/include/asm/memory.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index e965f1b560f1..5f6ddcc56452 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -187,6 +187,7 @@ static inline unsigned long __phys_to_virt(unsigned long x) #define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) #endif #endif +#endif /* __ASSEMBLY__ */ #ifndef PHYS_OFFSET #ifdef PLAT_PHYS_OFFSET @@ -196,6 +197,8 @@ static inline unsigned long __phys_to_virt(unsigned long x) #endif #endif +#ifndef __ASSEMBLY__ + /* * PFNs are used to describe any physical page; this means * PFN 0 == physical address 0. -- cgit v1.2.3 From 70b0476a2394de4f4e32e0b67288d80ff71ca963 Mon Sep 17 00:00:00 2001 From: David Brown Date: Tue, 4 Sep 2012 21:36:37 +0100 Subject: ARM: 7513/1: Make sure dtc is built before running it 'make dtbs' in a clean tree will try running the dtc before actually building it. Make these rules depend upon the scripts to build it. Cc: Signed-off-by: David Brown Signed-off-by: Russell King --- arch/arm/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 30eae87ead6d..a051dfbdd7db 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -284,10 +284,10 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -%.dtb: +%.dtb: scripts $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ -dtbs: +dtbs: scripts $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ # We use MRPROPER_FILES and CLEAN_FILES now -- cgit v1.2.3 From 62194bdab89b30f451d210247d09e1c146e6d0ad Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 6 Sep 2012 21:24:32 +0100 Subject: ARM: 7521/1: Fix semihosting Kconfig text It seems we were missing some text in the title for the semihosting DEBUG_LL option. Add in the "/O" and fix up some minor typos in the help text. Signed-off-by: Stephen Boyd Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/Kconfig.debug | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index f15f82bf3a50..e968a52e4881 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -356,15 +356,15 @@ choice is nothing connected to read from the DCC. config DEBUG_SEMIHOSTING - bool "Kernel low-level debug output via semihosting I" + bool "Kernel low-level debug output via semihosting I/O" help Semihosting enables code running on an ARM target to use the I/O facilities on a host debugger/emulator through a - simple SVC calls. The host debugger or emulator must have + simple SVC call. The host debugger or emulator must have semihosting enabled for the special svc call to be trapped otherwise the kernel will crash. - This is known to work with OpenOCD, as wellas + This is known to work with OpenOCD, as well as ARM's Fast Models, or any other controlling environment that implements semihosting. -- cgit v1.2.3 From 2b2040af0b64cd93e5d4df2494c4486cf604090d Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 7 Sep 2012 18:21:44 +0100 Subject: ARM: 7526/1: traps: send SIGILL if get_user fails on undef handling path get_user may fail to load from the provided __user address due to an unhandled fault generated by the access. In the case of the undefined instruction trap, this results in failure to load the faulting instruction, in which case we should send SIGILL to the task rather than continue with potentially uninitialised data. Signed-off-by: Will Deacon Cc: stable@vger.kernel.org Signed-off-by: Russell King --- arch/arm/kernel/traps.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index f7945218b8c6..b0179b89a04c 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -420,20 +420,23 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) #endif instr = *(u32 *) pc; } else if (thumb_mode(regs)) { - get_user(instr, (u16 __user *)pc); + if (get_user(instr, (u16 __user *)pc)) + goto die_sig; if (is_wide_instruction(instr)) { unsigned int instr2; - get_user(instr2, (u16 __user *)pc+1); + if (get_user(instr2, (u16 __user *)pc+1)) + goto die_sig; instr <<= 16; instr |= instr2; } - } else { - get_user(instr, (u32 __user *)pc); + } else if (get_user(instr, (u32 __user *)pc)) { + goto die_sig; } if (call_undef_hook(regs, instr) == 0) return; +die_sig: #ifdef CONFIG_DEBUG_USER if (user_debug & UDBG_UNDEFINED) { printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n", -- cgit v1.2.3 From 8404663f81d212918ff85f493649a7991209fa04 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 7 Sep 2012 18:22:28 +0100 Subject: ARM: 7527/1: uaccess: explicitly check __user pointer when !CPU_USE_DOMAINS The {get,put}_user macros don't perform range checking on the provided __user address when !CPU_HAS_DOMAINS. This patch reworks the out-of-line assembly accessors to check the user address against a specified limit, returning -EFAULT if is is out of range. [will: changed get_user register allocation to match put_user] [rmk: fixed building on older ARM architectures] Reported-by: Catalin Marinas Signed-off-by: Will Deacon Cc: stable@vger.kernel.org Signed-off-by: Russell King --- arch/arm/include/asm/assembler.h | 8 ++++++++ arch/arm/include/asm/uaccess.h | 40 +++++++++++++++++++++++++++------------- arch/arm/lib/getuser.S | 23 +++++++++++++++-------- arch/arm/lib/putuser.S | 6 ++++++ 4 files changed, 56 insertions(+), 21 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 03fb93621d0d..5c8b3bf4d825 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -320,4 +320,12 @@ .size \name , . - \name .endm + .macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req +#ifndef CONFIG_CPU_USE_DOMAINS + adds \tmp, \addr, #\size - 1 + sbcccs \tmp, \tmp, \limit + bcs \bad +#endif + .endm + #endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 479a6352e0b5..6f83ad6e4d3d 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -101,28 +101,39 @@ extern int __get_user_1(void *); extern int __get_user_2(void *); extern int __get_user_4(void *); -#define __get_user_x(__r2,__p,__e,__s,__i...) \ +#define __GUP_CLOBBER_1 "lr", "cc" +#ifdef CONFIG_CPU_USE_DOMAINS +#define __GUP_CLOBBER_2 "ip", "lr", "cc" +#else +#define __GUP_CLOBBER_2 "lr", "cc" +#endif +#define __GUP_CLOBBER_4 "lr", "cc" + +#define __get_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%1", "r2") \ + __asmeq("%3", "r1") \ "bl __get_user_" #__s \ : "=&r" (__e), "=r" (__r2) \ - : "0" (__p) \ - : __i, "cc") + : "0" (__p), "r" (__l) \ + : __GUP_CLOBBER_##__s) #define get_user(x,p) \ ({ \ + unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ register unsigned long __r2 asm("r2"); \ + register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __get_user_x(__r2, __p, __e, 1, "lr"); \ - break; \ + __get_user_x(__r2, __p, __e, __l, 1); \ + break; \ case 2: \ - __get_user_x(__r2, __p, __e, 2, "r3", "lr"); \ + __get_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __get_user_x(__r2, __p, __e, 4, "lr"); \ + __get_user_x(__r2, __p, __e, __l, 4); \ break; \ default: __e = __get_user_bad(); break; \ } \ @@ -135,31 +146,34 @@ extern int __put_user_2(void *, unsigned int); extern int __put_user_4(void *, unsigned int); extern int __put_user_8(void *, unsigned long long); -#define __put_user_x(__r2,__p,__e,__s) \ +#define __put_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%2", "r2") \ + __asmeq("%3", "r1") \ "bl __put_user_" #__s \ : "=&r" (__e) \ - : "0" (__p), "r" (__r2) \ + : "0" (__p), "r" (__r2), "r" (__l) \ : "ip", "lr", "cc") #define put_user(x,p) \ ({ \ + unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __r2 asm("r2") = (x); \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ + register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __put_user_x(__r2, __p, __e, 1); \ + __put_user_x(__r2, __p, __e, __l, 1); \ break; \ case 2: \ - __put_user_x(__r2, __p, __e, 2); \ + __put_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __put_user_x(__r2, __p, __e, 4); \ + __put_user_x(__r2, __p, __e, __l, 4); \ break; \ case 8: \ - __put_user_x(__r2, __p, __e, 8); \ + __put_user_x(__r2, __p, __e, __l, 8); \ break; \ default: __e = __put_user_bad(); break; \ } \ diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 11093a7c3e32..9b06bb41fca6 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -16,8 +16,9 @@ * __get_user_X * * Inputs: r0 contains the address + * r1 contains the address limit, which must be preserved * Outputs: r0 is the error code - * r2, r3 contains the zero-extended value + * r2 contains the zero-extended value * lr corrupted * * No other registers must be altered. (see @@ -27,33 +28,39 @@ * Note also that it is intended that __get_user_bad is not global. */ #include +#include #include #include ENTRY(__get_user_1) + check_uaccess r0, 1, r1, r2, __get_user_bad 1: TUSER(ldrb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__get_user_1) ENTRY(__get_user_2) -#ifdef CONFIG_THUMB2_KERNEL -2: TUSER(ldrb) r2, [r0] -3: TUSER(ldrb) r3, [r0, #1] + check_uaccess r0, 2, r1, r2, __get_user_bad +#ifdef CONFIG_CPU_USE_DOMAINS +rb .req ip +2: ldrbt r2, [r0], #1 +3: ldrbt rb, [r0], #0 #else -2: TUSER(ldrb) r2, [r0], #1 -3: TUSER(ldrb) r3, [r0] +rb .req r0 +2: ldrb r2, [r0] +3: ldrb rb, [r0, #1] #endif #ifndef __ARMEB__ - orr r2, r2, r3, lsl #8 + orr r2, r2, rb, lsl #8 #else - orr r2, r3, r2, lsl #8 + orr r2, rb, r2, lsl #8 #endif mov r0, #0 mov pc, lr ENDPROC(__get_user_2) ENTRY(__get_user_4) + check_uaccess r0, 4, r1, r2, __get_user_bad 4: TUSER(ldr) r2, [r0] mov r0, #0 mov pc, lr diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 7db25990c589..3d73dcb959b0 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -16,6 +16,7 @@ * __put_user_X * * Inputs: r0 contains the address + * r1 contains the address limit, which must be preserved * r2, r3 contains the value * Outputs: r0 is the error code * lr corrupted @@ -27,16 +28,19 @@ * Note also that it is intended that __put_user_bad is not global. */ #include +#include #include #include ENTRY(__put_user_1) + check_uaccess r0, 1, r1, ip, __put_user_bad 1: TUSER(strb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_1) ENTRY(__put_user_2) + check_uaccess r0, 2, r1, ip, __put_user_bad mov ip, r2, lsr #8 #ifdef CONFIG_THUMB2_KERNEL #ifndef __ARMEB__ @@ -60,12 +64,14 @@ ENTRY(__put_user_2) ENDPROC(__put_user_2) ENTRY(__put_user_4) + check_uaccess r0, 4, r1, ip, __put_user_bad 4: TUSER(str) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_4) ENTRY(__put_user_8) + check_uaccess r0, 8, r1, ip, __put_user_bad #ifdef CONFIG_THUMB2_KERNEL 5: TUSER(str) r2, [r0] 6: TUSER(str) r3, [r0, #4] -- cgit v1.2.3 From ad72907acd2943304c292ae36960bb66e6dc23c9 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 7 Sep 2012 18:24:10 +0100 Subject: ARM: 7528/1: uaccess: annotate [__]{get,put}_user functions with might_fault() The user access functions may generate a fault, resulting in invocation of a handler that may sleep. This patch annotates the accessors with might_fault() so that we print a warning if they are invoked from atomic context and help lockdep keep track of mmap_sem. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/uaccess.h | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 6f83ad6e4d3d..77bd79f2ffdb 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -118,7 +118,7 @@ extern int __get_user_4(void *); : "0" (__p), "r" (__l) \ : __GUP_CLOBBER_##__s) -#define get_user(x,p) \ +#define __get_user_check(x,p) \ ({ \ unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ @@ -141,6 +141,12 @@ extern int __get_user_4(void *); __e; \ }) +#define get_user(x,p) \ + ({ \ + might_fault(); \ + __get_user_check(x,p); \ + }) + extern int __put_user_1(void *, unsigned int); extern int __put_user_2(void *, unsigned int); extern int __put_user_4(void *, unsigned int); @@ -155,7 +161,7 @@ extern int __put_user_8(void *, unsigned long long); : "0" (__p), "r" (__r2), "r" (__l) \ : "ip", "lr", "cc") -#define put_user(x,p) \ +#define __put_user_check(x,p) \ ({ \ unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __r2 asm("r2") = (x); \ @@ -180,6 +186,12 @@ extern int __put_user_8(void *, unsigned long long); __e; \ }) +#define put_user(x,p) \ + ({ \ + might_fault(); \ + __put_user_check(x,p); \ + }) + #else /* CONFIG_MMU */ /* @@ -233,6 +245,7 @@ do { \ unsigned long __gu_addr = (unsigned long)(ptr); \ unsigned long __gu_val; \ __chk_user_ptr(ptr); \ + might_fault(); \ switch (sizeof(*(ptr))) { \ case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \ case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \ @@ -314,6 +327,7 @@ do { \ unsigned long __pu_addr = (unsigned long)(ptr); \ __typeof__(*(ptr)) __pu_val = (x); \ __chk_user_ptr(ptr); \ + might_fault(); \ switch (sizeof(*(ptr))) { \ case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \ case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \ -- cgit v1.2.3 From beafa0de3d3e0d0ece7638cded879815f359f1cb Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 7 Sep 2012 18:24:53 +0100 Subject: ARM: 7529/1: delay: set loops_per_jiffy when moving to timer-based loop The delay functions may be called by some platforms between switching to the timer-based delay loop but before calibration. In this case, the initial loops_per_jiffy may not be suitable for the timer (although a compromise may be achievable) and delay times may be considered too inaccurate. This patch updates loops_per_jiffy when switching to the timer-based delay loop so that delays are consistent prior to calibration. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/lib/delay.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index d6dacc69254e..395d5fbb8fa2 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -59,6 +59,7 @@ void __init init_current_timer_delay(unsigned long freq) { pr_info("Switching to timer-based delay loop\n"); lpj_fine = freq / HZ; + loops_per_jiffy = lpj_fine; arm_delay_ops.delay = __timer_delay; arm_delay_ops.const_udelay = __timer_const_udelay; arm_delay_ops.udelay = __timer_udelay; -- cgit v1.2.3