From 486d49914307e4e1ff0f5087f803cfa1e44a13bf Mon Sep 17 00:00:00 2001 From: Iskren Chernev Date: Sun, 20 Sep 2020 17:48:53 +0300 Subject: ARM: dts: qcom: msm8974-klte: Merge pinctrl nodes commit cd13c72c1853f219e1f ("ARM: dts: qcom: msm8974-klte: Add max77826 pmic node") and commit 8bf7a360a92cc6b2aebc8 ("ARM: dts: qcom: msm8974-klte: Add sdhci1 node") both added pinctrl node. This patch merges the two nodes. Signed-off-by: Iskren Chernev Link: https://lore.kernel.org/r/20200920144859.813032-2-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index d4dc98214225..9520c6e7910c 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -258,6 +258,16 @@ bias-pull-up; }; }; + + i2c6_pins: i2c6 { + mux { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + + drive-strength = <2>; + bias-disable; + }; + }; }; sdhci@f9824900 { @@ -298,18 +308,6 @@ }; }; - pinctrl@fd510000 { - i2c6_pins: i2c6 { - mux { - pins = "gpio29", "gpio30"; - function = "blsp_i2c6"; - - drive-strength = <2>; - bias-disable; - }; - }; - }; - i2c@f9928000 { status = "okay"; -- cgit v1.2.3 From a193dc521c97c07098bf0b6345966561a1f0ab9f Mon Sep 17 00:00:00 2001 From: Iskren Chernev Date: Sun, 20 Sep 2020 17:48:54 +0300 Subject: ARM: dts: qcom: msm8974-klte: Add support for touchkey Add support for the touchkey found on the Samsung Galaxy S5. The touchkey is responsible for handling the application and back buttons found around the home button. Signed-off-by: Iskren Chernev Link: https://lore.kernel.org/r/20200920144859.813032-3-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts | 44 ++++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index 9520c6e7910c..750e2f261139 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -145,7 +145,7 @@ }; pma8084_l19: l19 { - regulator-min-microvolt = <2900000>; + regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; @@ -203,6 +203,31 @@ }; }; + i2c-gpio-touchkey { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + sda-gpios = <&msmgpio 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_touchkey_pins>; + + touchkey@20 { + compatible = "cypress,tm2-touchkey"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_pin>; + + vcc-supply = <&max77826_ldo15>; + vdd-supply = <&pma8084_l19>; + + linux,keycodes = ; + }; + }; + /delete-node/ vreg-boost; }; @@ -268,6 +293,15 @@ bias-disable; }; }; + + i2c_touchkey_pins: i2c-touchkey { + mux { + pins = "gpio95", "gpio96"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; }; sdhci@f9824900 { @@ -418,6 +452,14 @@ bias-pull-up; power-source = ; }; + + touchkey_pin: touchkey-int-pin { + pins = "gpio6"; + function = "normal"; + bias-disable; + input-enable; + power-source = ; + }; }; }; }; -- cgit v1.2.3 From 972f5a62a698857f4a02a6667f53ca158ce7421d Mon Sep 17 00:00:00 2001 From: Iskren Chernev Date: Sun, 20 Sep 2020 17:48:55 +0300 Subject: ARM: dts: qcom: msm8974-klte: Add support for touchscreen Add support for the touchscreen found on the Samsung Galaxy S5. Signed-off-by: Iskren Chernev Link: https://lore.kernel.org/r/20200920144859.813032-4-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts | 54 +++++++++++++++++++++++++ 1 file changed, 54 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index 750e2f261139..085636f182d0 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -284,6 +284,16 @@ }; }; + i2c2_pins: i2c2 { + mux { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + + drive-strength = <2>; + bias-disable; + }; + }; + i2c6_pins: i2c6 { mux { pins = "gpio29", "gpio30"; @@ -342,6 +352,42 @@ }; }; + i2c@f9924000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&max77826_ldo13>; + vio-supply = <&pma8084_lvs2>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; + + syna,startup-delay-ms = <100>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; + }; + i2c@f9928000 { status = "okay"; @@ -460,6 +506,14 @@ input-enable; power-source = ; }; + + touch_pin: touchscreen-int-pin { + pins = "gpio8"; + function = "normal"; + bias-disable; + input-enable; + power-source = ; + }; }; }; }; -- cgit v1.2.3 From 60367221d7d46d623dbef4cd30924e99c97ff2e5 Mon Sep 17 00:00:00 2001 From: Iskren Chernev Date: Sun, 20 Sep 2020 17:48:56 +0300 Subject: ARM: dts: qcom: msm8974-klte: Add support for led The klte uses a Panasonic AN30259A LED controller for it's indicator led. Signed-off-by: Iskren Chernev Link: https://lore.kernel.org/r/20200920144859.813032-5-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts | 48 +++++++++++++++++++++++++ 1 file changed, 48 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index 085636f182d0..7b398da9b75e 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -4,6 +4,7 @@ #include #include #include +#include / { model = "Samsung Galaxy S5"; @@ -228,6 +229,44 @@ }; }; + i2c-gpio-led { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + scl-gpios = <&msmgpio 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&msmgpio 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_led_pins>; + + i2c-gpio,delay-us = <2>; + + led-controller@30 { + compatible = "panasonic,an30259a"; + reg = <0x30>; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + color = ; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_STATUS; + color = ; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_STATUS; + color = ; + }; + }; + }; + /delete-node/ vreg-boost; }; @@ -312,6 +351,15 @@ bias-pull-up; }; }; + + i2c_led_pins: i2c-led { + mux { + pins = "gpio120", "gpio121"; + function = "gpio"; + input-enable; + bias-pull-down; + }; + }; }; sdhci@f9824900 { -- cgit v1.2.3 From 99128e7503bed5475aadd10fa97b1d7ffc5a35c2 Mon Sep 17 00:00:00 2001 From: Iskren Chernev Date: Sun, 20 Sep 2020 17:48:57 +0300 Subject: ARM: dts: qcom: msm8974-klte: Add gpio expander chip The Samsung Galaxy S5 has a GPIO Expander chip, the PCAL6416A with 16 ports on a i2c bus. These pins are used for WiFi, NFC, IR among other things. Signed-off-by: Iskren Chernev Link: https://lore.kernel.org/r/20200920144859.813032-6-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts | 29 +++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index 7b398da9b75e..29099b83b231 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -236,10 +236,25 @@ scl-gpios = <&msmgpio 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&msmgpio 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; - pinctrl-0 = <&i2c_led_pins>; + pinctrl-0 = <&i2c_led_gpioex_pins>; i2c-gpio,delay-us = <2>; + gpio_expander: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + + gpio-controller; + #gpio-cells = <2>; + + vcc-supply = <&pma8084_s4>; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioex_pin>; + + reset-gpios = <&msmgpio 145 GPIO_ACTIVE_LOW>; + }; + led-controller@30 { compatible = "panasonic,an30259a"; reg = <0x30>; @@ -352,7 +367,7 @@ }; }; - i2c_led_pins: i2c-led { + i2c_led_gpioex_pins: i2c-led-gpioex { mux { pins = "gpio120", "gpio121"; function = "gpio"; @@ -360,6 +375,16 @@ bias-pull-down; }; }; + + gpioex_pin: gpioex { + res { + pins = "gpio145"; + function = "gpio"; + + bias-pull-up; + drive-strength = <2>; + }; + }; }; sdhci@f9824900 { -- cgit v1.2.3 From 19524d5b1700616d4cfad9922238bd31ad758074 Mon Sep 17 00:00:00 2001 From: Iskren Chernev Date: Sun, 20 Sep 2020 17:48:58 +0300 Subject: ARM: dts: qcom: msm8974-klte: Add support for wifi The Samsung Galaxy S5 (klte), uses a Broadcom 4354 Chip connected on the SDIO bus. The chip also requires a corresponding firmware + txt file[1]. [1] https://gitlab.com/postmarketOS/pmaports/-/blob/master/firmware/firmware-samsung-klte/APKBUILD Signed-off-by: Iskren Chernev Link: https://lore.kernel.org/r/20200920144859.813032-7-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts | 74 +++++++++++++++++++++++++ 1 file changed, 74 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index 29099b83b231..989447beb431 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -282,6 +282,17 @@ }; }; + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + /delete-node/ vreg-boost; }; @@ -338,6 +349,20 @@ }; }; + sdhc3_pin_a: sdhc3-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + i2c2_pins: i2c2 { mux { pins = "gpio6", "gpio7"; @@ -385,6 +410,16 @@ drive-strength = <2>; }; }; + + wifi_pin: wifi { + int { + pins = "gpio92"; + function = "gpio"; + + input-enable; + bias-pull-down; + }; + }; }; sdhci@f9824900 { @@ -400,6 +435,36 @@ pinctrl-0 = <&sdhc1_pin_a>; }; + sdhci@f98a4900 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + max-frequency = <100000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc3_pin_a>; + + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pma8084_s4>; + + bus-width = <4>; + non-removable; + + wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + + interrupt-parent = <&msmgpio>; + interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>; + }; + }; + usb@f9a55000 { status = "ok"; @@ -587,6 +652,15 @@ input-enable; power-source = ; }; + + wlan_sleep_clk_pin: wlan-sleep-clk-pin { + pins = "gpio16"; + function = "func2"; + + output-high; + power-source = ; + qcom,drive-strength = ; + }; }; }; }; -- cgit v1.2.3 From 5434dcef54964e1f8a293e43b93ba6b45cc477ae Mon Sep 17 00:00:00 2001 From: Iskren Chernev Date: Sun, 20 Sep 2020 17:48:59 +0300 Subject: ARM: dts: qcom: msm8974-klte: Add support for SD card The Samsung Galaxy S5 (klte), has 3 SDHCI nodes used for internal storage, WiFi, external SD card slot. The external SD card slot is similar to the internal storage. Signed-off-by: Iskren Chernev Link: https://lore.kernel.org/r/20200920144859.813032-8-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts | 44 ++++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index 989447beb431..b0899107f3ce 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -12,6 +12,8 @@ aliases { serial0 = &blsp1_uart1; + sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ + sdhc2 = &sdhc_2; /* SDC2 SD card slot */ }; chosen { @@ -161,6 +163,9 @@ pma8084_l21: l21 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; + + regulator-allow-set-load; + regulator-system-load = <200000>; }; pma8084_l22: l22 { @@ -349,6 +354,24 @@ }; }; + sdhc2_pin_a: sdhc2-pin-active { + clk-cmd-data { + pins = "gpio35", "gpio36", "gpio37", "gpio38", + "gpio39", "gpio40"; + function = "sdc3"; + drive-strength = <8>; + bias-disable; + }; + }; + + sdhc2_cd_pin: sdhc2-cd { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + sdhc3_pin_a: sdhc3-pin-active { clk { pins = "sdc2_clk"; @@ -422,7 +445,7 @@ }; }; - sdhci@f9824900 { + sdhc_1: sdhci@f9824900 { status = "ok"; vmmc-supply = <&pma8084_l20>; @@ -435,6 +458,25 @@ pinctrl-0 = <&sdhc1_pin_a>; }; + sdhc_2: sdhci@f9864900 { + status = "ok"; + + max-frequency = <100000000>; + + vmmc-supply = <&pma8084_l21>; + vqmmc-supply = <&pma8084_l13>; + + bus-width = <4>; + + /* cd-gpio is intentionally disabled. If enabled, an SD card + * present during boot is not initialized correctly. Without + * cd-gpios the driver resorts to polling, so hotplug works. + */ + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>; + // cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; + }; + sdhci@f98a4900 { status = "okay"; -- cgit v1.2.3 From da8d46992e672ec7300b5b6857d0a4eebf0727ac Mon Sep 17 00:00:00 2001 From: Iskren Chernev Date: Thu, 26 Nov 2020 16:11:43 +0200 Subject: ARM: dts: qcom: msm8974-klte: Add fuel gauge The Samsung Galaxy S5 uses a maxim17048 fuelgauge. The maxim,rcomp value is taken from downstream kernel. Model data and temperature-based compensation are not yet supported in the mainline driver, but the readings seem fine nevertheless. Signed-off-by: Iskren Chernev Link: https://lore.kernel.org/r/20201126141144.1763779-1-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts | 39 +++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index b0899107f3ce..97352de91314 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -406,6 +406,16 @@ }; }; + i2c12_pins: i2c12 { + mux { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + + drive-strength = <2>; + bias-disable; + }; + }; + i2c_touchkey_pins: i2c-touchkey { mux { pins = "gpio95", "gpio96"; @@ -666,6 +676,27 @@ }; }; }; + + i2c@f9968000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c12_pins>; + + fuelgauge@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x56>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; + }; + }; }; &spmi_bus { @@ -703,6 +734,14 @@ power-source = ; qcom,drive-strength = ; }; + + fuelgauge_pin: fuelgauge-int-pin { + pins = "gpio21"; + function = "normal"; + bias-disable; + input-enable; + power-source = ; + }; }; }; }; -- cgit v1.2.3 From 45dfa741df8607ee4a45455c194ce654badb2478 Mon Sep 17 00:00:00 2001 From: Iskren Chernev Date: Thu, 26 Nov 2020 16:11:44 +0200 Subject: ARM: dts: qcom: msm8974-lge-nexus5: Add fuel gauge MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The LG Nexus 5 uses a maxim17048 fuelgauge. The maxim,rcomp value is taken from downstream dt. Temperature-based compensation is not yet supported in the mainline driver, but the readings seem fine nevertheless. Signed-off-by: Iskren Chernev Tested-by: Nícolas F. R. A. Prado Link: https://lore.kernel.org/r/20201126141144.1763779-2-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson --- .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 32b474bfeec3..e769f638f205 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -566,6 +566,22 @@ usb_otg_vbus: usb-otg-vbus { }; }; + + fuelgauge: max17048@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x4d>; + + interrupt-parent = <&msmgpio>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; + + maxim,alert-low-soc-level = <2>; + }; }; i2c@f9924000 { @@ -706,6 +722,15 @@ power-source = ; }; + fuelgauge_pin: fuelgauge-int { + pins = "gpio9"; + function = "normal"; + + bias-disable; + input-enable; + power-source = ; + }; + wlan_sleep_clk_pin: wl-sleep-clk { pins = "gpio16"; function = "func2"; -- cgit v1.2.3 From fbdb20b1fcb1a252a70f31b35976cf79dc051f19 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 15 Nov 2020 19:29:48 +0000 Subject: ARM: dts: qcom-pma8084: Drop incorrect use of io-channel-ranges This property is used by io-channel consumers, not providers so should not present here. Note dt_schema will now detect this error as there is a dependency between this property and io-channels. Signed-off-by: Jonathan Cameron Cc: Andy Gross Cc: Bjorn Andersson Link: https://lore.kernel.org/r/20201115192951.1073632-7-jic23@kernel.org Signed-off-by: Bjorn Andersson --- arch/arm/boot/dts/qcom-pma8084.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi index ea1ca166165c..e921c5e93a5d 100644 --- a/arch/arm/boot/dts/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -68,7 +68,6 @@ #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; - io-channel-ranges; die_temp { reg = ; -- cgit v1.2.3