From 3ea9ae57b412391b14d059ba424c9c51bfbc5059 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Fri, 12 Apr 2019 14:36:35 +0200 Subject: ARM: davinci: add missing sentinels to GPIO lookup tables Some GPIO lookup tables defined in davinci board files are missing array sentinels. If an entry for given device cannot be found, this will cause a kernel panic. Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-da830-evm.c | 2 ++ arch/arm/mach-davinci/board-da850-evm.c | 1 + arch/arm/mach-davinci/board-dm355-evm.c | 1 + arch/arm/mach-davinci/board-dm644x-evm.c | 1 + arch/arm/mach-davinci/board-omapl138-hawk.c | 1 + 5 files changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index ff097ecfa451..e3d74e43c47d 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -58,6 +58,7 @@ static struct gpiod_lookup_table da830_evm_usb_gpio_lookup = { .table = { GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, "vbus", 0), GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0), + { } }, }; @@ -156,6 +157,7 @@ static struct gpiod_lookup_table mmc_gpios_table = { GPIO_ACTIVE_LOW), GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp", GPIO_ACTIVE_LOW), + { } }, }; diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 1fdc9283a8c5..4ee65a8a3b80 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -784,6 +784,7 @@ static struct gpiod_lookup_table mmc_gpios_table = { GPIO_ACTIVE_LOW), GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp", GPIO_ACTIVE_HIGH), + { } }, }; diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 64d81fc86f14..5113273fda69 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -121,6 +121,7 @@ static struct gpiod_lookup_table i2c_recovery_gpiod_table = { GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl", GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + { } }, }; diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index de15f782816e..9d87d4e440ea 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -663,6 +663,7 @@ static struct gpiod_lookup_table i2c_recovery_gpiod_table = { GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SCL_PIN, "scl", GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + { } }, }; diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 0896af2bed24..e244c8648594 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -303,6 +303,7 @@ static struct gpiod_lookup_table hawk_usb_gpio_lookup = { .table = { GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, "vbus", 0), GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0), + { } }, }; -- cgit v1.2.3 From 1d272894ec4f06a0b7880f71de8f521ef68926bc Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Fri, 12 Apr 2019 14:36:38 +0200 Subject: ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx Instead of directly using the vbus GPIO we should model it as a fixed regulator. Add all necessary fix-ups for the regulator to be registered and configure the vbus GPIO as its enable pin. Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-omapl138-hawk.c | 49 +++++++++++++++++++++++++++-- 1 file changed, 46 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index e244c8648594..db177a6a7e48 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -298,15 +299,50 @@ static const short da850_hawk_usb11_pins[] = { -1 }; -static struct gpiod_lookup_table hawk_usb_gpio_lookup = { +static struct regulator_consumer_supply hawk_usb_supplies[] = { + REGULATOR_SUPPLY("vbus", NULL), +}; + +static struct regulator_init_data hawk_usb_vbus_data = { + .consumer_supplies = hawk_usb_supplies, + .num_consumer_supplies = ARRAY_SIZE(hawk_usb_supplies), +}; + +static struct fixed_voltage_config hawk_usb_vbus = { + .supply_name = "vbus", + .microvolts = 3300000, + .init_data = &hawk_usb_vbus_data, +}; + +static struct platform_device hawk_usb_vbus_device = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &hawk_usb_vbus, + }, +}; + +static struct gpiod_lookup_table hawk_usb_oc_gpio_lookup = { .dev_id = "ohci-da8xx", .table = { - GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, "vbus", 0), GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0), { } }, }; +static struct gpiod_lookup_table hawk_usb_vbus_gpio_lookup = { + .dev_id = "reg-fixed-voltage.0", + .table = { + GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, NULL, 0), + { } + }, +}; + +static struct gpiod_lookup_table *hawk_usb_gpio_lookups[] = { + &hawk_usb_oc_gpio_lookup, + &hawk_usb_vbus_gpio_lookup, +}; + static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = { /* TPS2087 switch @ 5V */ .potpgt = (3 + 1) / 2, /* 3 ms max */ @@ -327,12 +363,19 @@ static __init void omapl138_hawk_usb_init(void) pr_warn("%s: USB PHY CLK registration failed: %d\n", __func__, ret); + gpiod_add_lookup_tables(hawk_usb_gpio_lookups, + ARRAY_SIZE(hawk_usb_gpio_lookups)); + ret = da8xx_register_usb_phy(); if (ret) pr_warn("%s: USB PHY registration failed: %d\n", __func__, ret); - gpiod_add_lookup_table(&hawk_usb_gpio_lookup); + ret = platform_device_register(&hawk_usb_vbus_device); + if (ret) { + pr_warn("%s: Unable to register the vbus supply\n", __func__); + return; + } ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata); if (ret) -- cgit v1.2.3 From 274e4c336192b3cc4a361f131e6d9f53b58e3d83 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Fri, 12 Apr 2019 14:36:39 +0200 Subject: ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx Instead of directly using the vbus GPIO we should model it as a fixed regulator. Add all necessary fix-ups for the regulator to be registered and configure the vbus GPIO as its enable pin. Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-da830-evm.c | 49 +++++++++++++++++++++++++++++++-- 1 file changed, 46 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index e3d74e43c47d..51a892702e27 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -53,15 +54,50 @@ static const short da830_evm_usb11_pins[] = { -1 }; -static struct gpiod_lookup_table da830_evm_usb_gpio_lookup = { +static struct regulator_consumer_supply da830_evm_usb_supplies[] = { + REGULATOR_SUPPLY("vbus", NULL), +}; + +static struct regulator_init_data da830_evm_usb_vbus_data = { + .consumer_supplies = da830_evm_usb_supplies, + .num_consumer_supplies = ARRAY_SIZE(da830_evm_usb_supplies), +}; + +static struct fixed_voltage_config da830_evm_usb_vbus = { + .supply_name = "vbus", + .microvolts = 33000000, + .init_data = &da830_evm_usb_vbus_data, +}; + +static struct platform_device da830_evm_usb_vbus_device = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &da830_evm_usb_vbus, + }, +}; + +static struct gpiod_lookup_table da830_evm_usb_oc_gpio_lookup = { .dev_id = "ohci-da8xx", .table = { - GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, "vbus", 0), GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0), { } }, }; +static struct gpiod_lookup_table da830_evm_usb_vbus_gpio_lookup = { + .dev_id = "reg-fixed-voltage.0", + .table = { + GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, "vbus", 0), + { } + }, +}; + +static struct gpiod_lookup_table *da830_evm_usb_gpio_lookups[] = { + &da830_evm_usb_oc_gpio_lookup, + &da830_evm_usb_vbus_gpio_lookup, +}; + static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = { /* TPS2065 switch @ 5V */ .potpgt = (3 + 1) / 2, /* 3 ms max */ @@ -76,6 +112,9 @@ static __init void da830_evm_usb_init(void) pr_warn("%s: USB PHY CLK registration failed: %d\n", __func__, ret); + gpiod_add_lookup_tables(da830_evm_usb_gpio_lookups, + ARRAY_SIZE(da830_evm_usb_gpio_lookups)); + ret = da8xx_register_usb_phy(); if (ret) pr_warn("%s: USB PHY registration failed: %d\n", @@ -101,7 +140,11 @@ static __init void da830_evm_usb_init(void) return; } - gpiod_add_lookup_table(&da830_evm_usb_gpio_lookup); + ret = platform_device_register(&da830_evm_usb_vbus_device); + if (ret) { + pr_warn("%s: Unable to register the vbus supply\n", __func__); + return; + } ret = da8xx_register_usb11(&da830_evm_usb11_pdata); if (ret) -- cgit v1.2.3