From 771120761fe026170f910f4e591b1e0861de0523 Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Sun, 17 Jan 2016 16:49:05 +0100 Subject: ARM: OMAP2+: hwmod data: Add SSI data for omap36xx This patch enables Synchronous Serial Interface (SSI) hwmod support for OMAP36xx SoCs (used by Nokia N950/N9). Signed-off-by: Sebastian Reichel Tested-by: Aaro Koskinen Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 0a985325cd64..9869a75c5d96 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3583,14 +3583,14 @@ static struct omap_hwmod_class_sysconfig omap34xx_ssi_sysc = { .sysc_fields = &omap_hwmod_sysc_type1, }; -static struct omap_hwmod_class omap34xx_ssi_hwmod_class = { +static struct omap_hwmod_class omap3xxx_ssi_hwmod_class = { .name = "ssi", .sysc = &omap34xx_ssi_sysc, }; -static struct omap_hwmod omap34xx_ssi_hwmod = { +static struct omap_hwmod omap3xxx_ssi_hwmod = { .name = "ssi", - .class = &omap34xx_ssi_hwmod_class, + .class = &omap3xxx_ssi_hwmod_class, .clkdm_name = "core_l4_clkdm", .main_clk = "ssi_ssr_fck", .prcm = { @@ -3605,9 +3605,9 @@ static struct omap_hwmod omap34xx_ssi_hwmod = { }; /* L4 CORE -> SSI */ -static struct omap_hwmod_ocp_if omap34xx_l4_core__ssi = { +static struct omap_hwmod_ocp_if omap3xxx_l4_core__ssi = { .master = &omap3xxx_l4_core_hwmod, - .slave = &omap34xx_ssi_hwmod, + .slave = &omap3xxx_ssi_hwmod, .clk = "ssi_ick", .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3760,7 +3760,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_sad2d__l3, &omap3xxx_l4_core__mmu_isp, &omap3xxx_l3_main__mmu_iva, - &omap34xx_l4_core__ssi, + &omap3xxx_l4_core__ssi, NULL }; @@ -3784,6 +3784,7 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_sad2d__l3, &omap3xxx_l4_core__mmu_isp, &omap3xxx_l3_main__mmu_iva, + &omap3xxx_l4_core__ssi, NULL }; -- cgit v1.2.3 From 4965be1fc8dbb3dfc8bf401c78cb78c35d5d0d4d Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Tue, 9 Feb 2016 14:35:43 +0530 Subject: ARM: DRA7: hwmod: Fix OCP2SCP sysconfig OCP2SCP doesn't support smart idle wakeup according to Table 26-22. OCP2SCP_SYSCONFIG in AM572x TRM [1] and Table 26-22. OCP2SCP_SYSCONFIG in AM571x TRM [2]. Remove SIDLE_SMART_WKUP from the list of supported SIDLE modes in hwmod data. [1] -> http://www.ti.com/lit/ug/spruhz6e/spruhz6e.pdf [2] -> http://www.ti.com/lit/ug/spruhz7a/spruhz7a.pdf Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 848356e38b74..84c2699e551b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1482,8 +1482,7 @@ static struct omap_hwmod_class_sysconfig dra7xx_ocp2scp_sysc = { .syss_offs = 0x0014, .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), .sysc_fields = &omap_hwmod_sysc_type1, }; -- cgit v1.2.3 From 8fe097a3d99e22355fb8e3bcee59542bf3f46b2d Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 14 Jan 2016 19:41:10 +0530 Subject: ARM: DRA7: hwmod: Add reset data for PCIe Add PCIe reset data to PCIe hwmods on DRA7x. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sekhar Nori Reviewed-by: Suman Anna Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 15 +++++++++++++++ arch/arm/mach-omap2/prm7xx.h | 1 + 2 files changed, 16 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 84c2699e551b..b61355e2a771 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1531,29 +1531,44 @@ static struct omap_hwmod_class dra7xx_pciess_hwmod_class = { }; /* pcie1 */ +static struct omap_hwmod_rst_info dra7xx_pciess1_resets[] = { + { .name = "pcie", .rst_shift = 0 }, +}; + static struct omap_hwmod dra7xx_pciess1_hwmod = { .name = "pcie1", .class = &dra7xx_pciess_hwmod_class, .clkdm_name = "pcie_clkdm", + .rst_lines = dra7xx_pciess1_resets, + .rst_lines_cnt = ARRAY_SIZE(dra7xx_pciess1_resets), .main_clk = "l4_root_clk_div", .prcm = { .omap4 = { .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET, + .rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET, .context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET, .modulemode = MODULEMODE_SWCTRL, }, }, }; +/* pcie2 */ +static struct omap_hwmod_rst_info dra7xx_pciess2_resets[] = { + { .name = "pcie", .rst_shift = 1 }, +}; + /* pcie2 */ static struct omap_hwmod dra7xx_pciess2_hwmod = { .name = "pcie2", .class = &dra7xx_pciess_hwmod_class, .clkdm_name = "pcie_clkdm", + .rst_lines = dra7xx_pciess2_resets, + .rst_lines_cnt = ARRAY_SIZE(dra7xx_pciess2_resets), .main_clk = "l4_root_clk_div", .prcm = { .omap4 = { .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET, + .rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET, .context_offs = DRA7XX_RM_L3INIT_PCIESS2_CONTEXT_OFFSET, .modulemode = MODULEMODE_SWCTRL, }, diff --git a/arch/arm/mach-omap2/prm7xx.h b/arch/arm/mach-omap2/prm7xx.h index cc1e6a2b97f6..294deed956f3 100644 --- a/arch/arm/mach-omap2/prm7xx.h +++ b/arch/arm/mach-omap2/prm7xx.h @@ -360,6 +360,7 @@ /* PRM.L3INIT_PRM register offsets */ #define DRA7XX_PM_L3INIT_PWRSTCTRL_OFFSET 0x0000 #define DRA7XX_PM_L3INIT_PWRSTST_OFFSET 0x0004 +#define DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET 0x0010 #define DRA7XX_PM_L3INIT_MMC1_WKDEP_OFFSET 0x0028 #define DRA7XX_RM_L3INIT_MMC1_CONTEXT_OFFSET 0x002c #define DRA7XX_PM_L3INIT_MMC2_WKDEP_OFFSET 0x0030 -- cgit v1.2.3 From 98f42221501353067251fbf11e732707dbb68ce3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Fri, 19 Feb 2016 10:35:39 -0800 Subject: ARM: OMAP3: Add cpuidle parameters table for omap3430 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Based on CPU type choose generic omap3 or omap3430 specific cpuidle parameters. Parameters for omap3430 were measured on Nokia N900 device and added by commit 5a1b1d3a9efa ("OMAP3: RX-51: Pass cpu idle parameters") which were later removed by commit 231900afba52 ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") due to huge code complexity. This patch brings cpuidle parameters for omap3430 devices again, but uses simple condition based on CPU type. Fixes: 231900afba52 ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") Signed-off-by: Pali Rohár Acked-by: Daniel Lezcano Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/cpuidle34xx.c | 69 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 68 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index aa7b379e2661..2a3db0bd9e15 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -34,6 +34,7 @@ #include "pm.h" #include "control.h" #include "common.h" +#include "soc.h" /* Mach specific information to be recorded in the C-state driver_data */ struct omap3_idle_statedata { @@ -315,6 +316,69 @@ static struct cpuidle_driver omap3_idle_driver = { .safe_state_index = 0, }; +/* + * Numbers based on measurements made in October 2009 for PM optimized kernel + * with CPU freq enabled on device Nokia N900. Assumes OPP2 (main idle OPP, + * and worst case latencies). + */ +static struct cpuidle_driver omap3430_idle_driver = { + .name = "omap3430_idle", + .owner = THIS_MODULE, + .states = { + { + .enter = omap3_enter_idle_bm, + .exit_latency = 110 + 162, + .target_residency = 5, + .name = "C1", + .desc = "MPU ON + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 106 + 180, + .target_residency = 309, + .name = "C2", + .desc = "MPU ON + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 107 + 410, + .target_residency = 46057, + .name = "C3", + .desc = "MPU RET + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 121 + 3374, + .target_residency = 46057, + .name = "C4", + .desc = "MPU OFF + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 855 + 1146, + .target_residency = 46057, + .name = "C5", + .desc = "MPU RET + CORE RET", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 7580 + 4134, + .target_residency = 484329, + .name = "C6", + .desc = "MPU OFF + CORE RET", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 7505 + 15274, + .target_residency = 484329, + .name = "C7", + .desc = "MPU OFF + CORE OFF", + }, + }, + .state_count = ARRAY_SIZE(omap3_idle_data), + .safe_state_index = 0, +}; + /* Public functions */ /** @@ -333,5 +397,8 @@ int __init omap3_idle_init(void) if (!mpu_pd || !core_pd || !per_pd || !cam_pd) return -ENODEV; - return cpuidle_register(&omap3_idle_driver, NULL); + if (cpu_is_omap3430()) + return cpuidle_register(&omap3430_idle_driver, NULL); + else + return cpuidle_register(&omap3_idle_driver, NULL); } -- cgit v1.2.3 From d9d806b90260fbcd9bd1d43db492bfcbc19f014a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 22 Feb 2016 09:22:38 -0800 Subject: ARM: OMAP2+: Fix out of range register access with syscon_config.max_register If syscon_config.max_register is initialized like it should be, we have omap_ctrl_read/write() fail with out of range register access at least for omap3. We have omap3.dtsi setting up a regmap range for scm_conf, but we now have omap_ctrl_read/write() also attempt to use the regmap. However, omap_ctrl_read/write() is also used for other register ranges in the system control module (SCM). Let's fix the issue by just removing the regmap_read/write() usage for control module as suggested by Tero Kristo . Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/control.c | 21 ++------------------- 1 file changed, 2 insertions(+), 19 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index cf5855174c93..1662071bb2cc 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -36,7 +36,6 @@ static void __iomem *omap2_ctrl_base; static s16 omap2_ctrl_offset; -static struct regmap *omap2_ctrl_syscon; #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) struct omap3_scratchpad { @@ -166,16 +165,9 @@ u16 omap_ctrl_readw(u16 offset) u32 omap_ctrl_readl(u16 offset) { - u32 val; - offset &= 0xfffc; - if (!omap2_ctrl_syscon) - val = readl_relaxed(omap2_ctrl_base + offset); - else - regmap_read(omap2_ctrl_syscon, omap2_ctrl_offset + offset, - &val); - return val; + return readl_relaxed(omap2_ctrl_base + offset); } void omap_ctrl_writeb(u8 val, u16 offset) @@ -207,11 +199,7 @@ void omap_ctrl_writew(u16 val, u16 offset) void omap_ctrl_writel(u32 val, u16 offset) { offset &= 0xfffc; - if (!omap2_ctrl_syscon) - writel_relaxed(val, omap2_ctrl_base + offset); - else - regmap_write(omap2_ctrl_syscon, omap2_ctrl_offset + offset, - val); + writel_relaxed(val, omap2_ctrl_base + offset); } #ifdef CONFIG_ARCH_OMAP3 @@ -715,8 +703,6 @@ int __init omap_control_init(void) if (IS_ERR(syscon)) return PTR_ERR(syscon); - omap2_ctrl_syscon = syscon; - if (of_get_child_by_name(scm_conf, "clocks")) { ret = omap2_clk_provider_init(scm_conf, data->index, @@ -724,9 +710,6 @@ int __init omap_control_init(void) if (ret) return ret; } - - iounmap(omap2_ctrl_base); - omap2_ctrl_base = NULL; } else { /* No scm_conf found, direct access */ ret = omap2_clk_provider_init(np, data->index, NULL, -- cgit v1.2.3 From 4f5395f0d1a5b7c8921331ef81081da00302a37c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 26 Feb 2016 11:03:07 -0800 Subject: ARM: OMAP2+: Fix hwmod clock for l4_ls Looks like we have few cases with wrong clock, and some entries with missing clock. It should always be sysclk6 for the l4_ls instance. Cc: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index e493ae372910..f8cc40021729 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -429,6 +429,7 @@ static struct omap_hwmod dm81xx_elm_hwmod = { static struct omap_hwmod_ocp_if dm81xx_l4_ls__elm = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_elm_hwmod, + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -478,6 +479,7 @@ static struct omap_hwmod dm81xx_gpio1_hwmod = { static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio1 = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_gpio1_hwmod, + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -504,6 +506,7 @@ static struct omap_hwmod dm81xx_gpio2_hwmod = { static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio2 = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_gpio2_hwmod, + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -628,7 +631,7 @@ static struct omap_hwmod dm814x_timer1_hwmod = { static struct omap_hwmod_ocp_if dm814x_l4_ls__timer1 = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm814x_timer1_hwmod, - .clk = "timer1_fck", + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -665,7 +668,7 @@ static struct omap_hwmod dm814x_timer2_hwmod = { static struct omap_hwmod_ocp_if dm814x_l4_ls__timer2 = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm814x_timer2_hwmod, - .clk = "timer2_fck", + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -1123,6 +1126,7 @@ static struct omap_hwmod dm81xx_mailbox_hwmod = { static struct omap_hwmod_ocp_if dm81xx_l4_ls__mailbox = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_mailbox_hwmod, + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -1157,6 +1161,7 @@ static struct omap_hwmod dm81xx_spinbox_hwmod = { static struct omap_hwmod_ocp_if dm81xx_l4_ls__spinbox = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_spinbox_hwmod, + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; -- cgit v1.2.3