From a1bbaec0cd2a59d4bb09b72e4541a8a12e480d5d Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Tue, 2 Sep 2008 11:44:21 -0400
Subject: [ARM] split highmem into its own memory bank

Doing so will greatly simplify the bootmem initialization code as each
bank is therefore entirely lowmem or highmem with no crossing between
those zones.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/mmu.c | 84 +++++++++++++++++++++++++++++++++----------------------
 1 file changed, 51 insertions(+), 33 deletions(-)

(limited to 'arch/arm/mm')

diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 6870805c31dd..ab511d94d917 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -651,44 +651,62 @@ __early_param("vmalloc=", early_vmalloc);
 
 #define VMALLOC_MIN	(void *)(VMALLOC_END - vmalloc_reserve)
 
-static int __init check_membank_valid(struct membank *mb)
-{
-	/*
-	 * Check whether this memory region would entirely overlap
-	 * the vmalloc area.
-	 */
-	if (phys_to_virt(mb->start) >= VMALLOC_MIN) {
-		printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
-			"(vmalloc region overlap).\n",
-			mb->start, mb->start + mb->size - 1);
-		return 0;
-	}
-
-	/*
-	 * Check whether this memory region would partially overlap
-	 * the vmalloc area.
-	 */
-	if (phys_to_virt(mb->start + mb->size) < phys_to_virt(mb->start) ||
-	    phys_to_virt(mb->start + mb->size) > VMALLOC_MIN) {
-		unsigned long newsize = VMALLOC_MIN - phys_to_virt(mb->start);
-
-		printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx "
-			"to -%.8lx (vmalloc region overlap).\n",
-			mb->start, mb->start + mb->size - 1,
-			mb->start + newsize - 1);
-		mb->size = newsize;
-	}
-
-	return 1;
-}
-
 static void __init sanity_check_meminfo(void)
 {
 	int i, j;
 
 	for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
-		if (check_membank_valid(&meminfo.bank[i]))
-			meminfo.bank[j++] = meminfo.bank[i];
+		struct membank *bank = &meminfo.bank[j];
+		*bank = meminfo.bank[i];
+
+#ifdef CONFIG_HIGHMEM
+		/*
+		 * Split those memory banks which are partially overlapping
+		 * the vmalloc area greatly simplifying things later.
+		 */
+		if (__va(bank->start) < VMALLOC_MIN &&
+		    bank->size > VMALLOC_MIN - __va(bank->start)) {
+			if (meminfo.nr_banks >= NR_BANKS) {
+				printk(KERN_CRIT "NR_BANKS too low, "
+						 "ignoring high memory\n");
+			} else {
+				memmove(bank + 1, bank,
+					(meminfo.nr_banks - i) * sizeof(*bank));
+				meminfo.nr_banks++;
+				i++;
+				bank[1].size -= VMALLOC_MIN - __va(bank->start);
+				bank[1].start = __pa(VMALLOC_MIN - 1) + 1;
+				j++;
+			}
+			bank->size = VMALLOC_MIN - __va(bank->start);
+		}
+#else
+		/*
+		 * Check whether this memory bank would entirely overlap
+		 * the vmalloc area.
+		 */
+		if (__va(bank->start) >= VMALLOC_MIN) {
+			printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
+			       "(vmalloc region overlap).\n",
+			       bank->start, bank->start + bank->size - 1);
+			continue;
+		}
+
+		/*
+		 * Check whether this memory bank would partially overlap
+		 * the vmalloc area.
+		 */
+		if (__va(bank->start + bank->size) > VMALLOC_MIN ||
+		    __va(bank->start + bank->size) < __va(bank->start)) {
+			unsigned long newsize = VMALLOC_MIN - __va(bank->start);
+			printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx "
+			       "to -%.8lx (vmalloc region overlap).\n",
+			       bank->start, bank->start + bank->size - 1,
+			       bank->start + newsize - 1);
+			bank->size = newsize;
+		}
+#endif
+		j++;
 	}
 	meminfo.nr_banks = j;
 }
-- 
cgit v1.2.3