From e88d556dc5f0ef437e3538277a1dd33e5038be77 Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Sat, 27 Feb 2010 14:13:43 -0600 Subject: OMAP3: serial: Check for zero-based physical addr This is for protecting a wrong mapping attempt of a zero-based physical address. The result is that, no serial port will be attempted to be mapped. Also add an additional protection for NULL clocks before attempting to enable them (if above condition applies) Signed-off-by: Sergio Aguirre --- arch/arm/mach-omap2/serial.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index da77930480e9..ef91fc0390b4 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -664,6 +664,12 @@ void __init omap_serial_early_init(void) struct device *dev = &pdev->dev; struct plat_serial8250_port *p = dev->platform_data; + /* Don't map zero-based physical address */ + if (p->mapbase == 0) { + printk(KERN_WARNING "omap serial: No physical address" + " for uart#%d, so skipping early_init...\n", i); + continue; + } /* * Module 4KB + L4 interconnect 4KB * Static mapping, never released @@ -727,6 +733,13 @@ void __init omap_serial_init_port(int port) pdev = &uart->pdev; dev = &pdev->dev; + /* Don't proceed if there's no clocks available */ + if (unlikely(!uart->ick || !uart->fck)) { + WARN(1, "%s: can't init uart%d, no clocks available\n", + kobject_name(&dev->kobj), port); + return; + } + omap_uart_enable_clocks(uart); omap_uart_reset(uart); -- cgit v1.2.3 From 10c805eb4f89d44fe4e457d727b59af15c4a4a36 Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Tue, 9 Mar 2010 13:22:14 -0600 Subject: OMAP3: serial: Use dev_* macros instead of printk As we have a struct device populated at the time we are printing the errors, using dev_* macros makes more sense, as could give a better idea where the error/warning came from. Signed-off-by: Sergio Aguirre --- arch/arm/mach-omap2/serial.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index ef91fc0390b4..a55e6aeb648e 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -550,7 +550,7 @@ static ssize_t sleep_timeout_store(struct device *dev, unsigned int value; if (sscanf(buf, "%u", &value) != 1) { - printk(KERN_ERR "sleep_timeout_store: Invalid value\n"); + dev_err(dev, "sleep_timeout_store: Invalid value\n"); return -EINVAL; } @@ -666,8 +666,8 @@ void __init omap_serial_early_init(void) /* Don't map zero-based physical address */ if (p->mapbase == 0) { - printk(KERN_WARNING "omap serial: No physical address" - " for uart#%d, so skipping early_init...\n", i); + dev_warn(dev, "no physical address for uart#%d," + " so skipping early_init...\n", i); continue; } /* @@ -676,21 +676,21 @@ void __init omap_serial_early_init(void) */ p->membase = ioremap(p->mapbase, SZ_8K); if (!p->membase) { - printk(KERN_ERR "ioremap failed for uart%i\n", i + 1); + dev_err(dev, "ioremap failed for uart%i\n", i + 1); continue; } sprintf(name, "uart%d_ick", i + 1); uart->ick = clk_get(NULL, name); if (IS_ERR(uart->ick)) { - printk(KERN_ERR "Could not get uart%d_ick\n", i + 1); + dev_err(dev, "Could not get uart%d_ick\n", i + 1); uart->ick = NULL; } sprintf(name, "uart%d_fck", i+1); uart->fck = clk_get(NULL, name); if (IS_ERR(uart->fck)) { - printk(KERN_ERR "Could not get uart%d_fck\n", i + 1); + dev_err(dev, "Could not get uart%d_fck\n", i + 1); uart->fck = NULL; } -- cgit v1.2.3 From 4b1bbd3fd9384ad6ca62903172ccb6a8729dd897 Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Fri, 26 Feb 2010 19:58:47 -0600 Subject: omap2/3/4: serial: Remove condition for getting uart4_phys This check is invalid, since we haven't filled the omap_revision var at this point. Signed-off-by: Sergio Aguirre --- arch/arm/mach-omap2/serial.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index a55e6aeb648e..3771254dfa81 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -115,7 +115,6 @@ static struct plat_serial8250_port serial_platform_data2[] = { } }; -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) static struct plat_serial8250_port serial_platform_data3[] = { { .irq = 70, @@ -128,23 +127,12 @@ static struct plat_serial8250_port serial_platform_data3[] = { } }; -static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals) -{ - serial_platform_data3[0].mapbase = omap2_globals->uart4_phys; -} -#else -static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals) -{ -} -#endif - void __init omap2_set_globals_uart(struct omap_globals *omap2_globals) { serial_platform_data0[0].mapbase = omap2_globals->uart1_phys; serial_platform_data1[0].mapbase = omap2_globals->uart2_phys; serial_platform_data2[0].mapbase = omap2_globals->uart3_phys; - if (cpu_is_omap3630() || cpu_is_omap44xx()) - omap2_set_globals_uart4(omap2_globals); + serial_platform_data3[0].mapbase = omap2_globals->uart4_phys; } static inline unsigned int __serial_read_reg(struct uart_port *up, -- cgit v1.2.3 From 2d7f66104cc9ef508c382c8d6cb1ce6123383350 Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Mon, 1 Mar 2010 11:48:26 -0600 Subject: omap3: zoom2/3 / 3630sdp: Don't init always all uarts This is useless, since in Zoom2/3 boards, the ports aren't even physically accessible. They must be explicitly initted in the board-zoom2.c, board-zoom3.c and board-3630sdp.c files instead. Signed-off-by: Sergio Aguirre --- arch/arm/mach-omap2/board-zoom-peripherals.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index ca95d8d64136..6b3984964cc5 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -280,7 +280,6 @@ static void enable_board_wakeup_source(void) void __init zoom_peripherals_init(void) { omap_i2c_init(); - omap_serial_init(); usb_musb_init(&musb_board_data); enable_board_wakeup_source(); } -- cgit v1.2.3 From 9e265aa7ac493aa0a3de80aa3092d8677b3e8546 Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Mon, 1 Mar 2010 11:52:36 -0600 Subject: omap3: 3630sdp: Explicitly enable all UARTs All UARTs seem physically reachable, so, enable them all. Signed-off-by: Sergio Aguirre --- arch/arm/mach-omap2/board-3630sdp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index a0a2a113465c..504d2bd222fe 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -96,6 +96,7 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init omap_sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); + omap_serial_init(); zoom_peripherals_init(); board_smc91x_init(); enable_board_wakeup_source(); -- cgit v1.2.3 From fcbcea93abbe361e14dd458d0a5a3e9dadaa5ba9 Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Mon, 1 Mar 2010 12:17:15 -0600 Subject: omap3: zoom 2/3: Change debugboard serial port id This is now changed to PLAT8250_DEV_PLATFORM (= 0), because it's the only port that's going to be initialized in Zoom 2/3 boards. So, it doesn't make sense to keep the hardcoded 3 value anymore. Signed-off-by: Sergio Aguirre --- arch/arm/mach-omap2/board-zoom-debugboard.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index bb4018b60642..e15d2e87cfc1 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -96,7 +96,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device zoom_debugboard_serial_device = { .name = "serial8250", - .id = 3, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, -- cgit v1.2.3 From d5647c18eac9a313a89a3049a9fff51b20021a44 Mon Sep 17 00:00:00 2001 From: Thara Gopinath Date: Wed, 31 Mar 2010 04:16:29 -0600 Subject: OMAP: HWMOD: Adding clockdomain check This patch adds check for presence of clockdomain structure in the API omap_hwmod_get_pwrdm before trying to access the powerdomain structure. This will prevent unnecessary crashing of the system in case of a clock node with out an associated clockdomain. Signed-off-by: Thara Gopinath Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index c6649472ce0d..e436dcb19795 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1511,6 +1511,9 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh) c = oh->slaves[oh->_mpu_port_index]->_clk; } + if (!c->clkdm) + return NULL; + return c->clkdm->pwrdm.ptr; } -- cgit v1.2.3 From 766d305fead341889e7b9611fdc97236075a29fb Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 31 Mar 2010 04:16:30 -0600 Subject: OMAP4: prcm: Use logical OR instead of bitwise OR This patch fixes usage of bitwise OR in if conditions, and instead uses logical OR. Signed-off-by: Rajendra Nayak Cc: Abhijit Pagare Cc: Tony Lindgren Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clockdomain.c | 6 +++--- arch/arm/mach-omap2/powerdomain.c | 2 +- arch/arm/mach-omap2/prcm.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index b87ad66f083e..6e568ec995ee 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -240,7 +240,7 @@ static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable) bits = OMAP24XX_CLKSTCTRL_ENABLE_AUTO; else bits = OMAP24XX_CLKSTCTRL_DISABLE_AUTO; - } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) { + } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) { if (enable) bits = OMAP34XX_CLKSTCTRL_ENABLE_AUTO; else @@ -812,7 +812,7 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm) cm_set_mod_reg_bits(OMAP24XX_FORCESTATE, clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL); - } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) { + } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) { u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_SLEEP << __ffs(clkdm->clktrctrl_mask)); @@ -856,7 +856,7 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm) cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE, clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL); - } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) { + } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) { u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_WAKEUP << __ffs(clkdm->clktrctrl_mask)); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 9a0fb385622b..ebfce7d1a5d3 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -222,7 +222,7 @@ void pwrdm_init(struct powerdomain **pwrdm_list) { struct powerdomain **p = NULL; - if (cpu_is_omap24xx() | cpu_is_omap34xx()) { + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { pwrstctrl_reg_offs = OMAP2_PM_PWSTCTRL; pwrstst_reg_offs = OMAP2_PM_PWSTST; } else if (cpu_is_omap44xx()) { diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 9537f6f2352d..07a60f1204ca 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -123,7 +123,7 @@ struct omap3_prcm_regs prcm_context; u32 omap_prcm_get_reset_sources(void) { /* XXX This presumably needs modification for 34XX */ - if (cpu_is_omap24xx() | cpu_is_omap34xx()) + if (cpu_is_omap24xx() || cpu_is_omap34xx()) return prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f; if (cpu_is_omap44xx()) return prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f; @@ -157,7 +157,7 @@ void omap_prcm_arch_reset(char mode, const char *cmd) else WARN_ON(1); - if (cpu_is_omap24xx() | cpu_is_omap34xx()) + if (cpu_is_omap24xx() || cpu_is_omap34xx()) prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs, OMAP2_RM_RSTCTRL); if (cpu_is_omap44xx()) -- cgit v1.2.3 From d54a45e2533ef33678dc340298b022a289d2b3e3 Mon Sep 17 00:00:00 2001 From: Ranjith Lohithakshan Date: Wed, 31 Mar 2010 04:16:30 -0600 Subject: OMAP3: clock: fix enable bit used for dpll4_m4x2 clock The enable bit for dpll4_m4x2 clock should be OMAP3430_PWRDN_DSS1_SHIFT. The code erroneously uses OMAP3430_PWRDN_CAM_SHIFT which is meant for dpll4_m5x2 clock. This came into notice during a recent review of the clock tree. Signed-off-by: Ranjith Lohithakshan Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock3xxx_data.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index d5153b6bd6cb..9cba5560519b 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -895,7 +895,7 @@ static struct clk dpll4_m4x2_ck = { .ops = &clkops_omap2_dflt_wait, .parent = &dpll4_m4_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, + .enable_bit = OMAP3430_PWRDN_DSS1_SHIFT, .flags = INVERT_ENABLE, .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, -- cgit v1.2.3 From df571c4ab32da9bc05a7db98516fc06ef3cdc5d1 Mon Sep 17 00:00:00 2001 From: Richard Woodruff Date: Wed, 7 Apr 2010 07:47:21 +0000 Subject: omap4: Fix build break when used with gcc-4.4.1 (2009-q3) This patch adds argument to smc calls as gcc-4.4.1 requires it otherwise the build breaks with 2009-q3 toolchanin. arch/arm/mach-omap2/omap-headsmp.S: Assembler messages: arch/arm/mach-omap2/omap-headsmp.S:36: Error: missing expression -- `smc' arch/arm/mach-omap2/omap-headsmp.S:55: Error: missing expression -- `smc' arch/arm/mach-omap2/omap-headsmp.S:63: Error: missing expression -- `smc' make[1]: *** [arch/arm/mach-omap2/omap-headsmp.o] Error 1 Signed-off-by: Richard Woodruff Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap-headsmp.S | 6 +++--- arch/arm/mach-omap2/omap44xx-smc.S | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index aa3f65c2ac97..ef0e7a00dd6c 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -33,7 +33,7 @@ ENTRY(omap_secondary_startup) hold: ldr r12,=0x103 dsb - smc @ read from AuxCoreBoot0 + smc #0 @ read from AuxCoreBoot0 mov r0, r0, lsr #9 mrc p15, 0, r4, c0, c0, 5 and r4, r4, #0x0f @@ -52,7 +52,7 @@ ENTRY(omap_modify_auxcoreboot0) stmfd sp!, {r1-r12, lr} ldr r12, =0x104 dsb - smc + smc #0 ldmfd sp!, {r1-r12, pc} END(omap_modify_auxcoreboot0) @@ -60,6 +60,6 @@ ENTRY(omap_auxcoreboot_addr) stmfd sp!, {r2-r12, lr} ldr r12, =0x105 dsb - smc + smc #0 ldmfd sp!, {r2-r12, pc} END(omap_auxcoreboot_addr) diff --git a/arch/arm/mach-omap2/omap44xx-smc.S b/arch/arm/mach-omap2/omap44xx-smc.S index 89bb2b141473..f61c7771ca47 100644 --- a/arch/arm/mach-omap2/omap44xx-smc.S +++ b/arch/arm/mach-omap2/omap44xx-smc.S @@ -27,6 +27,6 @@ ENTRY(omap_smc1) mov r12, r0 mov r0, r1 dsb - smc + smc #0 ldmfd sp!, {r2-r12, pc} END(omap_smc1) -- cgit v1.2.3 From 67d24820c2f8e4df26e2ce6c7463db3f9d187f1f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 21 Apr 2010 15:27:25 -0700 Subject: omap2: Fix ARM processor check for 24xx The value to check is 7 for V6 instead. The code has been working as it falls through to 24xx code if the other checks fail. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/include/mach/entry-macro.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S index ff25c7e4e606..50fd74916643 100644 --- a/arch/arm/mach-omap2/include/mach/entry-macro.S +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -52,7 +52,7 @@ omap_irq_base: .word 0 mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision and \tmp, \tmp, #0x000f0000 @ only check architecture - cmp \tmp, #0x00060000 @ is v6? + cmp \tmp, #0x00070000 @ is v6? beq 2400f @ found v6 so it's omap24xx mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision and \tmp, \tmp, #0x000000f0 @ check cortex 8 or 9 -- cgit v1.2.3 From 1dea5c6b5876ea917a082e95a76c10aac307d4ec Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 21 Apr 2010 15:27:24 -0700 Subject: omap: Fix n8x0 mmc_mmc_init compile warnings and typos Fix warning: 'return' with a value, in function returning void in n8x0_mmc_init. Also fix a search and replace typo. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-n8x0.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index da9bcb898991..3ccc34ebdcc7 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -216,7 +216,7 @@ static void __init n8x0_onenand_init(void) {} */ #define N8X0_SLOT_SWITCH_GPIO 96 #define N810_EMMC_VSD_GPIO 23 -#define NN810_EMMC_VIO_GPIO 9 +#define N810_EMMC_VIO_GPIO 9 static int n8x0_mmc_switch_slot(struct device *dev, int slot) { @@ -304,10 +304,10 @@ static void n810_set_power_emmc(struct device *dev, if (power_on) { gpio_set_value(N810_EMMC_VSD_GPIO, 1); msleep(1); - gpio_set_value(NN810_EMMC_VIO_GPIO, 1); + gpio_set_value(N810_EMMC_VIO_GPIO, 1); msleep(1); } else { - gpio_set_value(NN810_EMMC_VIO_GPIO, 0); + gpio_set_value(N810_EMMC_VIO_GPIO, 0); msleep(50); gpio_set_value(N810_EMMC_VSD_GPIO, 0); msleep(50); @@ -468,7 +468,7 @@ static void n8x0_mmc_cleanup(struct device *dev) if (machine_is_nokia_n810()) { gpio_free(N810_EMMC_VSD_GPIO); - gpio_free(NN810_EMMC_VIO_GPIO); + gpio_free(N810_EMMC_VIO_GPIO); } } @@ -529,7 +529,7 @@ void __init n8x0_mmc_init(void) err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch"); if (err) - return err; + return; gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0); @@ -537,17 +537,17 @@ void __init n8x0_mmc_init(void) err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf"); if (err) { gpio_free(N8X0_SLOT_SWITCH_GPIO); - return err; + return; } gpio_direction_output(N810_EMMC_VSD_GPIO, 0); - err = gpio_request(NN810_EMMC_VIO_GPIO, "MMC slot 2 Vdd"); + err = gpio_request(N810_EMMC_VIO_GPIO, "MMC slot 2 Vdd"); if (err) { gpio_free(N8X0_SLOT_SWITCH_GPIO); gpio_free(N810_EMMC_VSD_GPIO); - return err; + return; } - gpio_direction_output(NN810_EMMC_VIO_GPIO, 0); + gpio_direction_output(N810_EMMC_VIO_GPIO, 0); } mmc_data[0] = &mmc1_data; -- cgit v1.2.3 From f6b74535b5286ddb7a8c86a48ec372615cffbc4c Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Mon, 1 Mar 2010 15:02:36 +0000 Subject: omap3: Fix EHCI port for IGEP v2 board IGEP v2 uses EHCI port 1 instead of EHCI port 2. Signed-off-by: Enric Balletbo i Serra Acked-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-igep0020.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 3c7789d45051..d55c57b761a9 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -458,13 +458,13 @@ static struct omap_musb_board_data musb_board_data = { }; static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = IGEP2_GPIO_USBH_NRESET, + .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET, + .reset_gpio_port[1] = -EINVAL, .reset_gpio_port[2] = -EINVAL, }; -- cgit v1.2.3 From 9df76b7f179538903dfb4660ae27c807dd27535a Mon Sep 17 00:00:00 2001 From: kishore kadiyala Date: Wed, 21 Apr 2010 18:19:37 +0000 Subject: OMAP4-HSMMC: FIX for MMC5 Controller IRQ Base This patch fixes HSMMC Controller5 IRQ Base. Signed-off-by: Kishore Kadiyala Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 23e4d7733610..2271b9bd1f50 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -726,7 +726,7 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, if (!cpu_is_omap44xx()) return; base = OMAP4_MMC5_BASE + OMAP4_MMC_REG_OFFSET; - irq = OMAP44XX_IRQ_MMC4; + irq = OMAP44XX_IRQ_MMC5; break; default: continue; -- cgit v1.2.3 From 2135bb53fb6c9a4b2ed7901b2b176a6100e29f6b Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Wed, 24 Mar 2010 12:52:16 +0000 Subject: omap: Devkit8000: Fix wrong usb port on Devkit8000 Disable the nonexistent ehci port on Devkit8000. Signed-off-by: Thomas Weber Acked-by: Anand Gadiyar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-devkit8000.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 5bfc13b3176c..db4c093e2afb 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -639,12 +639,12 @@ static struct omap_musb_board_data musb_board_data = { static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 147, + .reset_gpio_port[1] = -EINVAL, .reset_gpio_port[2] = -EINVAL }; -- cgit v1.2.3 From c8334810db6e74019048cb3fc17c5e0b4d0c8c68 Mon Sep 17 00:00:00 2001 From: Abraham Arce Date: Thu, 22 Apr 2010 14:42:15 +0000 Subject: OMAP4: Clocks: Change SPI Instance Names Change the name for the spi instances on omap44xx_clks to match the names omap2 spi driver gives: omap-mcspi.1 -> omap2_mcspi.1 omap-mcspi.2 -> omap2_mcspi.2 omap-mcspi.3 -> omap2_mcspi.3 omap-mcspi.4 -> omap2_mcspi.4 Signed-off-by: Abraham Arce Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock44xx_data.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 28b107967c86..a5c0c9c8e496 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -2671,10 +2671,10 @@ static struct omap_clk omap44xx_clks[] = { CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_443X), CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_443X), CLK("omap-mcbsp.4", "ick", &dummy_ck, CK_443X), - CLK("omap-mcspi.1", "ick", &dummy_ck, CK_443X), - CLK("omap-mcspi.2", "ick", &dummy_ck, CK_443X), - CLK("omap-mcspi.3", "ick", &dummy_ck, CK_443X), - CLK("omap-mcspi.4", "ick", &dummy_ck, CK_443X), + CLK("omap2_mcspi.1", "ick", &dummy_ck, CK_443X), + CLK("omap2_mcspi.2", "ick", &dummy_ck, CK_443X), + CLK("omap2_mcspi.3", "ick", &dummy_ck, CK_443X), + CLK("omap2_mcspi.4", "ick", &dummy_ck, CK_443X), CLK(NULL, "uart1_ick", &dummy_ck, CK_443X), CLK(NULL, "uart2_ick", &dummy_ck, CK_443X), CLK(NULL, "uart3_ick", &dummy_ck, CK_443X), -- cgit v1.2.3 From 5241b6b3bfa7be3661398cf93cb3dd187aeb65c6 Mon Sep 17 00:00:00 2001 From: "stanley.miao" Date: Tue, 20 Apr 2010 06:33:29 +0000 Subject: AM3517: initialize i2c subsystem after mux subsystem The initialize of i2c subsystem will set pinmux, so it should be done after the initialize of mux subsystem initialization. Signed-off-by: Stanley.Miao Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-am3517evm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 6ae880585d54..c1c4389fbd8f 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -294,9 +294,9 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init am3517_evm_init(void) { - am3517_evm_i2c_init(); - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + + am3517_evm_i2c_init(); platform_add_devices(am3517_evm_devices, ARRAY_SIZE(am3517_evm_devices)); -- cgit v1.2.3 From 11e1ef2d105900a302b7ca92bcaf96a96d0274a1 Mon Sep 17 00:00:00 2001 From: "stanley.miao" Date: Tue, 20 Apr 2010 06:33:30 +0000 Subject: omap: fix a gpmc nand problem If gpmc_t isn't given, we don't need to set timing for gpmc, or it will cause a Oops. Signed-off-by: Stanley.Miao Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc-nand.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 64d74f05abbe..e57fb29ff855 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -39,6 +39,9 @@ static int omap2_nand_gpmc_retime(void) struct gpmc_timings t; int err; + if (!gpmc_nand_data->gpmc_t) + return 0; + memset(&t, 0, sizeof(t)); t.sync_clk = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->sync_clk); t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on); -- cgit v1.2.3 From 31849483f17dd76d48341dfc6dfc38261b630d26 Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Thu, 25 Mar 2010 20:21:54 +0000 Subject: omap: board-sdp-flash.c: Fix typos in debug output Corrected type of flash in output (OneNAND => NOR). Removed whitespace after newline in output. Removed double whitespace in output. Signed-off-by: Thomas Weber Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-sdp-flash.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/board-sdp-flash.c b/arch/arm/mach-omap2/board-sdp-flash.c index b1b88deec7f2..2d026328e385 100644 --- a/arch/arm/mach-omap2/board-sdp-flash.c +++ b/arch/arm/mach-omap2/board-sdp-flash.c @@ -253,20 +253,20 @@ void __init sdp_flash_init(struct flash_partitions sdp_partition_info[]) } if (norcs > GPMC_CS_NUM) - printk(KERN_INFO "OneNAND: Unable to find configuration " - " in GPMC\n "); + printk(KERN_INFO "NOR: Unable to find configuration " + "in GPMC\n"); else board_nor_init(sdp_partition_info[0], norcs); if (onenandcs > GPMC_CS_NUM) printk(KERN_INFO "OneNAND: Unable to find configuration " - " in GPMC\n "); + "in GPMC\n"); else board_onenand_init(sdp_partition_info[1], onenandcs); if (nandcs > GPMC_CS_NUM) printk(KERN_INFO "NAND: Unable to find configuration " - " in GPMC\n "); + "in GPMC\n"); else board_nand_init(sdp_partition_info[2], nandcs); } -- cgit v1.2.3 From 6057db52a2c85659821feac4d3a86ada711893a4 Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Wed, 24 Mar 2010 12:52:10 +0000 Subject: omap: Devkit8000: Fix typo in supplies Replace wrong vdss_dsi with vdds_dsi. Signed-off-by: Thomas Weber Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-devkit8000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index db4c093e2afb..b82e4387faef 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -303,7 +303,7 @@ static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = { .dev = &devkit8000_lcd_device.dev, }, { - .supply = "vdss_dsi", + .supply = "vdds_dsi", .dev = &devkit8000_dss_device.dev, } }; -- cgit v1.2.3 From 51824c5f5ecf6175c1cc913cb5c7d6d6213e96aa Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Wed, 24 Mar 2010 12:52:11 +0000 Subject: omap: Devkit8000: Add missing package selection Devkit8000 uses the CUS package for OMAP3530. This patch adds missing package selection for CUS and enables CONFIG_MUX. Replace whitespace with tab in Kconfig. Signed-off-by: Thomas Weber Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index a8a3d1e23e26..2455dcc744a0 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -59,8 +59,10 @@ config MACH_OMAP3_BEAGLE select OMAP_PACKAGE_CBB config MACH_DEVKIT8000 - bool "DEVKIT8000 board" - depends on ARCH_OMAP3 + bool "DEVKIT8000 board" + depends on ARCH_OMAP3 + select OMAP_PACKAGE_CUS + select OMAP_MUX config MACH_OMAP_LDP bool "OMAP3 LDP board" -- cgit v1.2.3 From 3cdc6ee54a491003b583b47a56c4052c76c965e6 Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Wed, 24 Mar 2010 12:52:12 +0000 Subject: omap: Devkit8000: Fix typo in pin name Replace wrong sdr_cke[01] with sdrc_cke[01]. Signed-off-by: Thomas Weber Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-devkit8000.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index b82e4387faef..3fafef4ade0d 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -676,8 +676,8 @@ static void __init devkit8000_init(void) devkit8000_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init devkit8000_map_io(void) -- cgit v1.2.3 From 184644a633d1b8cf5f2f7cf0debc4ee3917adc44 Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Wed, 24 Mar 2010 12:52:13 +0000 Subject: omap: Devkit8000: Remove unnecessary include file Remove include otg.h. Signed-off-by: Thomas Weber Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-devkit8000.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 3fafef4ade0d..d605e0558a54 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -50,7 +50,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3 From faec32e5bfe699e40adcf30df82ec1db8fe8e43b Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Wed, 24 Mar 2010 12:52:14 +0000 Subject: omap: Devkit8000: Change position of init calls Change position of calling serial and ethernet initialization. Signed-off-by: Thomas Weber Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-devkit8000.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index d605e0558a54..0b4abd47a804 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -649,6 +649,10 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { static void __init devkit8000_init(void) { + omap_serial_init(); + + omap_dm9000_init(); + devkit8000_i2c_init(); platform_add_devices(devkit8000_devices, ARRAY_SIZE(devkit8000_devices)); @@ -658,10 +662,6 @@ static void __init devkit8000_init(void) spi_register_board_info(devkit8000_spi_board_info, ARRAY_SIZE(devkit8000_spi_board_info)); - omap_serial_init(); - - omap_dm9000_init(); - devkit8000_ads7846_init(); omap_mux_init_gpio(170, OMAP_PIN_INPUT); -- cgit v1.2.3 From cf25eb950d0d8ada0db33c1d99d61bce620c128f Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Wed, 24 Mar 2010 12:52:15 +0000 Subject: omap: Devkit8000: Remove unused pins Old code from original patch contains beagle board pins that are not available on the Devkit8000. Signed-off-by: Thomas Weber Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-devkit8000.c | 20 -------------------- 1 file changed, 20 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 0b4abd47a804..47e3af2166d4 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -268,20 +268,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev, devkit8000_vmmc1_supply.dev = mmc[0].dev; devkit8000_vsim_supply.dev = mmc[0].dev; - /* REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - - gpio_request(gpio + 1, "EHCI_nOC"); - gpio_direction_input(gpio + 1); - - /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ - gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - return 0; } @@ -664,12 +650,6 @@ static void __init devkit8000_init(void) devkit8000_ads7846_init(); - omap_mux_init_gpio(170, OMAP_PIN_INPUT); - - gpio_request(170, "DVI_nPD"); - /* REVISIT leave DVI powered down until it's needed ... */ - gpio_direction_output(170, true); - usb_musb_init(&musb_board_data); usb_ehci_init(&ehci_pdata); devkit8000_flash_init(); -- cgit v1.2.3