From e978aa7d7d57d04eb5f88a7507c4fb98577def77 Mon Sep 17 00:00:00 2001 From: Deepthi Dharwar Date: Fri, 28 Oct 2011 16:20:09 +0530 Subject: cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state Cpuidle governor only suggests the state to enter using the governor->select() interface, but allows the low level driver to override the recommended state. The actual entered state may be different because of software or hardware demotion. Software demotion is done by the back-end cpuidle driver and can be accounted correctly. Current cpuidle code uses last_state field to capture the actual state entered and based on that updates the statistics for the state entered. Ideally the driver enter routine should update the counters, and it should return the state actually entered rather than the time spent there. The generic cpuidle code should simply handle where the counters live in the sysfs namespace, not updating the counters. Reference: https://lkml.org/lkml/2011/3/25/52 Signed-off-by: Deepthi Dharwar Signed-off-by: Trinabh Gupta Tested-by: Jean Pihet Reviewed-by: Kevin Hilman Acked-by: Arjan van de Ven Acked-by: Kevin Hilman Signed-off-by: Len Brown --- arch/arm/mach-omap2/cpuidle34xx.c | 67 +++++++++++++++++++++++---------------- 1 file changed, 39 insertions(+), 28 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 4bf6e6e8b100..58425c75f1b8 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -88,17 +88,19 @@ static int _cpuidle_deny_idle(struct powerdomain *pwrdm, /** * omap3_enter_idle - Programs OMAP3 to enter the specified state * @dev: cpuidle device - * @state: The target state to be programmed + * @index: the index of state to be entered * * Called from the CPUidle framework to program the device to the * specified target state selected by the governor. */ static int omap3_enter_idle(struct cpuidle_device *dev, - struct cpuidle_state *state) + int index) { - struct omap3_idle_statedata *cx = cpuidle_get_statedata(state); + struct omap3_idle_statedata *cx = + cpuidle_get_statedata(&dev->states[index]); struct timespec ts_preidle, ts_postidle, ts_idle; u32 mpu_state = cx->mpu_state, core_state = cx->core_state; + int idle_time; /* Used to keep track of the total time in idle */ getnstimeofday(&ts_preidle); @@ -113,7 +115,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev, goto return_sleep_time; /* Deny idle for C1 */ - if (state == &dev->states[0]) { + if (index == 0) { pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle); pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle); } @@ -122,7 +124,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev, omap_sram_idle(); /* Re-allow idle for C1 */ - if (state == &dev->states[0]) { + if (index == 0) { pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle); pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle); } @@ -134,28 +136,35 @@ return_sleep_time: local_irq_enable(); local_fiq_enable(); - return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC; + idle_time = ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * \ + USEC_PER_SEC; + + /* Update cpuidle counters */ + dev->last_residency = idle_time; + + return index; } /** * next_valid_state - Find next valid C-state * @dev: cpuidle device - * @state: Currently selected C-state + * @index: Index of currently selected c-state * - * If the current state is valid, it is returned back to the caller. - * Else, this function searches for a lower c-state which is still - * valid. + * If the state corresponding to index is valid, index is returned back + * to the caller. Else, this function searches for a lower c-state which is + * still valid (as defined in omap3_power_states[]) and returns its index. * * A state is valid if the 'valid' field is enabled and * if it satisfies the enable_off_mode condition. */ -static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, - struct cpuidle_state *curr) +static int next_valid_state(struct cpuidle_device *dev, + int index) { - struct cpuidle_state *next = NULL; + struct cpuidle_state *curr = &dev->states[index]; struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr); u32 mpu_deepest_state = PWRDM_POWER_RET; u32 core_deepest_state = PWRDM_POWER_RET; + int next_index = -1; if (enable_off_mode) { mpu_deepest_state = PWRDM_POWER_OFF; @@ -172,20 +181,20 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, if ((cx->valid) && (cx->mpu_state >= mpu_deepest_state) && (cx->core_state >= core_deepest_state)) { - return curr; + return index; } else { int idx = OMAP3_NUM_STATES - 1; /* Reach the current state starting at highest C-state */ for (; idx >= 0; idx--) { if (&dev->states[idx] == curr) { - next = &dev->states[idx]; + next_index = idx; break; } } /* Should never hit this condition */ - WARN_ON(next == NULL); + WARN_ON(next_index == -1); /* * Drop to next valid state. @@ -197,37 +206,39 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, if ((cx->valid) && (cx->mpu_state >= mpu_deepest_state) && (cx->core_state >= core_deepest_state)) { - next = &dev->states[idx]; + next_index = idx; break; } } /* * C1 is always valid. - * So, no need to check for 'next==NULL' outside this loop. + * So, no need to check for 'next_index == -1' outside + * this loop. */ } - return next; + return next_index; } /** * omap3_enter_idle_bm - Checks for any bus activity * @dev: cpuidle device - * @state: The target state to be programmed + * @index: array index of target state to be programmed * * This function checks for any pending activity and then programs * the device to the specified or a safer state. */ static int omap3_enter_idle_bm(struct cpuidle_device *dev, - struct cpuidle_state *state) + int index) { - struct cpuidle_state *new_state; + struct cpuidle_state *state = &dev->states[index]; + int new_state_idx; u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state; struct omap3_idle_statedata *cx; int ret; if (!omap3_can_sleep()) { - new_state = dev->safe_state; + new_state_idx = dev->safe_state_index; goto select_state; } @@ -237,7 +248,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, */ cam_state = pwrdm_read_pwrst(cam_pd); if (cam_state == PWRDM_POWER_ON) { - new_state = dev->safe_state; + new_state_idx = dev->safe_state_index; goto select_state; } @@ -264,11 +275,10 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, if (per_next_state != per_saved_state) pwrdm_set_next_pwrst(per_pd, per_next_state); - new_state = next_valid_state(dev, state); + new_state_idx = next_valid_state(dev, index); select_state: - dev->last_state = new_state; - ret = omap3_enter_idle(dev, new_state); + ret = omap3_enter_idle(dev, new_state_idx); /* Restore original PER state if it was modified */ if (per_next_state != per_saved_state) @@ -339,11 +349,12 @@ int __init omap3_idle_init(void) cpuidle_register_driver(&omap3_idle_driver); dev = &per_cpu(omap3_idle_dev, smp_processor_id()); + dev->safe_state_index = -1; /* C1 . MPU WFI + Core active */ cx = _fill_cstate(dev, 0, "MPU ON + CORE ON"); (&dev->states[0])->enter = omap3_enter_idle; - dev->safe_state = &dev->states[0]; + dev->safe_state_index = 0; cx->valid = 1; /* C1 is always valid */ cx->mpu_state = PWRDM_POWER_ON; cx->core_state = PWRDM_POWER_ON; -- cgit v1.2.3 From 4202735e8ab6ecfb0381631a0d0b58fefe0bd4e2 Mon Sep 17 00:00:00 2001 From: Deepthi Dharwar Date: Fri, 28 Oct 2011 16:20:33 +0530 Subject: cpuidle: Split cpuidle_state structure and move per-cpu statistics fields This is the first step towards global registration of cpuidle states. The statistics used primarily by the governor are per-cpu and have to be split from rest of the fields inside cpuidle_state, which would be made global i.e. single copy. The driver_data field is also per-cpu and moved. Signed-off-by: Deepthi Dharwar Signed-off-by: Trinabh Gupta Tested-by: Jean Pihet Reviewed-by: Kevin Hilman Acked-by: Arjan van de Ven Acked-by: Kevin Hilman Signed-off-by: Len Brown --- arch/arm/mach-omap2/cpuidle34xx.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 58425c75f1b8..d3fce7b97fcf 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -97,7 +97,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev, int index) { struct omap3_idle_statedata *cx = - cpuidle_get_statedata(&dev->states[index]); + cpuidle_get_statedata(&dev->states_usage[index]); struct timespec ts_preidle, ts_postidle, ts_idle; u32 mpu_state = cx->mpu_state, core_state = cx->core_state; int idle_time; @@ -160,8 +160,9 @@ return_sleep_time: static int next_valid_state(struct cpuidle_device *dev, int index) { + struct cpuidle_state_usage *curr_usage = &dev->states_usage[index]; struct cpuidle_state *curr = &dev->states[index]; - struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr); + struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr_usage); u32 mpu_deepest_state = PWRDM_POWER_RET; u32 core_deepest_state = PWRDM_POWER_RET; int next_index = -1; @@ -202,7 +203,7 @@ static int next_valid_state(struct cpuidle_device *dev, */ idx--; for (; idx >= 0; idx--) { - cx = cpuidle_get_statedata(&dev->states[idx]); + cx = cpuidle_get_statedata(&dev->states_usage[idx]); if ((cx->valid) && (cx->mpu_state >= mpu_deepest_state) && (cx->core_state >= core_deepest_state)) { @@ -231,7 +232,6 @@ static int next_valid_state(struct cpuidle_device *dev, static int omap3_enter_idle_bm(struct cpuidle_device *dev, int index) { - struct cpuidle_state *state = &dev->states[index]; int new_state_idx; u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state; struct omap3_idle_statedata *cx; @@ -264,7 +264,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, * Prevent PER off if CORE is not in retention or off as this * would disable PER wakeups completely. */ - cx = cpuidle_get_statedata(state); + cx = cpuidle_get_statedata(&dev->states_usage[index]); core_next_state = cx->core_state; per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd); if ((per_next_state == PWRDM_POWER_OFF) && @@ -318,6 +318,7 @@ static inline struct omap3_idle_statedata *_fill_cstate( { struct omap3_idle_statedata *cx = &omap3_idle_data[idx]; struct cpuidle_state *state = &dev->states[idx]; + struct cpuidle_state_usage *state_usage = &dev->states_usage[idx]; state->exit_latency = cpuidle_params_table[idx].exit_latency; state->target_residency = cpuidle_params_table[idx].target_residency; @@ -326,7 +327,7 @@ static inline struct omap3_idle_statedata *_fill_cstate( cx->valid = cpuidle_params_table[idx].valid; sprintf(state->name, "C%d", idx + 1); strncpy(state->desc, descr, CPUIDLE_DESC_LEN); - cpuidle_set_statedata(state, cx); + cpuidle_set_statedata(state_usage, cx); return cx; } -- cgit v1.2.3 From 46bcfad7a819bd17ac4e831b04405152d59784ab Mon Sep 17 00:00:00 2001 From: Deepthi Dharwar Date: Fri, 28 Oct 2011 16:20:42 +0530 Subject: cpuidle: Single/Global registration of idle states This patch makes the cpuidle_states structure global (single copy) instead of per-cpu. The statistics needed on per-cpu basis by the governor are kept per-cpu. This simplifies the cpuidle subsystem as state registration is done by single cpu only. Having single copy of cpuidle_states saves memory. Rare case of asymmetric C-states can be handled within the cpuidle driver and architectures such as POWER do not have asymmetric C-states. Having single/global registration of all the idle states, dynamic C-state transitions on x86 are handled by the boot cpu. Here, the boot cpu would disable all the devices, re-populate the states and later enable all the devices, irrespective of the cpu that would receive the notification first. Reference: https://lkml.org/lkml/2011/4/25/83 Signed-off-by: Deepthi Dharwar Signed-off-by: Trinabh Gupta Tested-by: Jean Pihet Reviewed-by: Kevin Hilman Acked-by: Arjan van de Ven Acked-by: Kevin Hilman Signed-off-by: Len Brown --- arch/arm/mach-omap2/cpuidle34xx.c | 73 ++++++++++++++++++++++++++------------- 1 file changed, 49 insertions(+), 24 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index d3fce7b97fcf..1fe35c24fba2 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -88,12 +88,14 @@ static int _cpuidle_deny_idle(struct powerdomain *pwrdm, /** * omap3_enter_idle - Programs OMAP3 to enter the specified state * @dev: cpuidle device + * @drv: cpuidle driver * @index: the index of state to be entered * * Called from the CPUidle framework to program the device to the * specified target state selected by the governor. */ static int omap3_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { struct omap3_idle_statedata *cx = @@ -148,6 +150,7 @@ return_sleep_time: /** * next_valid_state - Find next valid C-state * @dev: cpuidle device + * @drv: cpuidle driver * @index: Index of currently selected c-state * * If the state corresponding to index is valid, index is returned back @@ -158,10 +161,11 @@ return_sleep_time: * if it satisfies the enable_off_mode condition. */ static int next_valid_state(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { struct cpuidle_state_usage *curr_usage = &dev->states_usage[index]; - struct cpuidle_state *curr = &dev->states[index]; + struct cpuidle_state *curr = &drv->states[index]; struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr_usage); u32 mpu_deepest_state = PWRDM_POWER_RET; u32 core_deepest_state = PWRDM_POWER_RET; @@ -188,7 +192,7 @@ static int next_valid_state(struct cpuidle_device *dev, /* Reach the current state starting at highest C-state */ for (; idx >= 0; idx--) { - if (&dev->states[idx] == curr) { + if (&drv->states[idx] == curr) { next_index = idx; break; } @@ -224,12 +228,14 @@ static int next_valid_state(struct cpuidle_device *dev, /** * omap3_enter_idle_bm - Checks for any bus activity * @dev: cpuidle device + * @drv: cpuidle driver * @index: array index of target state to be programmed * * This function checks for any pending activity and then programs * the device to the specified or a safer state. */ static int omap3_enter_idle_bm(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { int new_state_idx; @@ -238,7 +244,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, int ret; if (!omap3_can_sleep()) { - new_state_idx = dev->safe_state_index; + new_state_idx = drv->safe_state_index; goto select_state; } @@ -248,7 +254,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, */ cam_state = pwrdm_read_pwrst(cam_pd); if (cam_state == PWRDM_POWER_ON) { - new_state_idx = dev->safe_state_index; + new_state_idx = drv->safe_state_index; goto select_state; } @@ -275,10 +281,10 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, if (per_next_state != per_saved_state) pwrdm_set_next_pwrst(per_pd, per_next_state); - new_state_idx = next_valid_state(dev, index); + new_state_idx = next_valid_state(dev, drv, index); select_state: - ret = omap3_enter_idle(dev, new_state_idx); + ret = omap3_enter_idle(dev, drv, new_state_idx); /* Restore original PER state if it was modified */ if (per_next_state != per_saved_state) @@ -311,22 +317,30 @@ struct cpuidle_driver omap3_idle_driver = { .owner = THIS_MODULE, }; -/* Helper to fill the C-state common data and register the driver_data */ -static inline struct omap3_idle_statedata *_fill_cstate( - struct cpuidle_device *dev, +/* Helper to fill the C-state common data*/ +static inline void _fill_cstate(struct cpuidle_driver *drv, int idx, const char *descr) { - struct omap3_idle_statedata *cx = &omap3_idle_data[idx]; - struct cpuidle_state *state = &dev->states[idx]; - struct cpuidle_state_usage *state_usage = &dev->states_usage[idx]; + struct cpuidle_state *state = &drv->states[idx]; state->exit_latency = cpuidle_params_table[idx].exit_latency; state->target_residency = cpuidle_params_table[idx].target_residency; state->flags = CPUIDLE_FLAG_TIME_VALID; state->enter = omap3_enter_idle_bm; - cx->valid = cpuidle_params_table[idx].valid; sprintf(state->name, "C%d", idx + 1); strncpy(state->desc, descr, CPUIDLE_DESC_LEN); + +} + +/* Helper to register the driver_data */ +static inline struct omap3_idle_statedata *_fill_cstate_usage( + struct cpuidle_device *dev, + int idx) +{ + struct omap3_idle_statedata *cx = &omap3_idle_data[idx]; + struct cpuidle_state_usage *state_usage = &dev->states_usage[idx]; + + cx->valid = cpuidle_params_table[idx].valid; cpuidle_set_statedata(state_usage, cx); return cx; @@ -341,6 +355,7 @@ static inline struct omap3_idle_statedata *_fill_cstate( int __init omap3_idle_init(void) { struct cpuidle_device *dev; + struct cpuidle_driver *drv = &omap3_idle_driver; struct omap3_idle_statedata *cx; mpu_pd = pwrdm_lookup("mpu_pwrdm"); @@ -348,45 +363,52 @@ int __init omap3_idle_init(void) per_pd = pwrdm_lookup("per_pwrdm"); cam_pd = pwrdm_lookup("cam_pwrdm"); - cpuidle_register_driver(&omap3_idle_driver); + + drv->safe_state_index = -1; dev = &per_cpu(omap3_idle_dev, smp_processor_id()); - dev->safe_state_index = -1; /* C1 . MPU WFI + Core active */ - cx = _fill_cstate(dev, 0, "MPU ON + CORE ON"); - (&dev->states[0])->enter = omap3_enter_idle; - dev->safe_state_index = 0; + _fill_cstate(drv, 0, "MPU ON + CORE ON"); + (&drv->states[0])->enter = omap3_enter_idle; + drv->safe_state_index = 0; + cx = _fill_cstate_usage(dev, 0); cx->valid = 1; /* C1 is always valid */ cx->mpu_state = PWRDM_POWER_ON; cx->core_state = PWRDM_POWER_ON; /* C2 . MPU WFI + Core inactive */ - cx = _fill_cstate(dev, 1, "MPU ON + CORE ON"); + _fill_cstate(drv, 1, "MPU ON + CORE ON"); + cx = _fill_cstate_usage(dev, 1); cx->mpu_state = PWRDM_POWER_ON; cx->core_state = PWRDM_POWER_ON; /* C3 . MPU CSWR + Core inactive */ - cx = _fill_cstate(dev, 2, "MPU RET + CORE ON"); + _fill_cstate(drv, 2, "MPU RET + CORE ON"); + cx = _fill_cstate_usage(dev, 2); cx->mpu_state = PWRDM_POWER_RET; cx->core_state = PWRDM_POWER_ON; /* C4 . MPU OFF + Core inactive */ - cx = _fill_cstate(dev, 3, "MPU OFF + CORE ON"); + _fill_cstate(drv, 3, "MPU OFF + CORE ON"); + cx = _fill_cstate_usage(dev, 3); cx->mpu_state = PWRDM_POWER_OFF; cx->core_state = PWRDM_POWER_ON; /* C5 . MPU RET + Core RET */ - cx = _fill_cstate(dev, 4, "MPU RET + CORE RET"); + _fill_cstate(drv, 4, "MPU RET + CORE RET"); + cx = _fill_cstate_usage(dev, 4); cx->mpu_state = PWRDM_POWER_RET; cx->core_state = PWRDM_POWER_RET; /* C6 . MPU OFF + Core RET */ - cx = _fill_cstate(dev, 5, "MPU OFF + CORE RET"); + _fill_cstate(drv, 5, "MPU OFF + CORE RET"); + cx = _fill_cstate_usage(dev, 5); cx->mpu_state = PWRDM_POWER_OFF; cx->core_state = PWRDM_POWER_RET; /* C7 . MPU OFF + Core OFF */ - cx = _fill_cstate(dev, 6, "MPU OFF + CORE OFF"); + _fill_cstate(drv, 6, "MPU OFF + CORE OFF"); + cx = _fill_cstate_usage(dev, 6); /* * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot * enable OFF mode in a stable form for previous revisions. @@ -400,6 +422,9 @@ int __init omap3_idle_init(void) cx->mpu_state = PWRDM_POWER_OFF; cx->core_state = PWRDM_POWER_OFF; + drv->state_count = OMAP3_NUM_STATES; + cpuidle_register_driver(&omap3_idle_driver); + dev->state_count = OMAP3_NUM_STATES; if (cpuidle_register_device(dev)) { printk(KERN_ERR "%s: CPUidle register device failed\n", -- cgit v1.2.3 From cc1b0765da6078b906772b79ff211b88cc0ae958 Mon Sep 17 00:00:00 2001 From: sricharan Date: Wed, 23 Nov 2011 14:35:07 -0800 Subject: ARM: OMAP: hwmod: Fix the addr space, irq, dma count APIs The address spaces, irqs and dma reqs count APIs return the number of corresponding entries in a hwmod including a additional null value or a -1 terminator in the structure introduced recently. More information here: - 212738a4: omap_hwmod: use a terminator record with omap_hwmod_mpu_irqs arrays - 78183f3f: omap_hwmod: use a null structure record to terminate omap_hwmod_addr_space arrays - bc614958: omap_hwmod: use a terminator record with omap_hwmod_dma_info arrays The issue with irqs and dma info was originally reported by Benoit Cousson. The devices which have multiple hwmods and use device_build_ss are broken with this, as their resources are populated with a extra null value, subsequently the probe fails. So fix the API not to include the array terminator in the count. Reported-by: Benoit Cousson Signed-off-by: Santosh Shilimkar Signed-off-by: sricharan Signed-off-by: Benoit Cousson Cc: Paul Walmsley Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6b3088db83b7..207a2ff9a8c4 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -749,7 +749,7 @@ static int _count_mpu_irqs(struct omap_hwmod *oh) ohii = &oh->mpu_irqs[i++]; } while (ohii->irq != -1); - return i; + return i-1; } /** @@ -772,7 +772,7 @@ static int _count_sdma_reqs(struct omap_hwmod *oh) ohdi = &oh->sdma_reqs[i++]; } while (ohdi->dma_req != -1); - return i; + return i-1; } /** @@ -795,7 +795,7 @@ static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os) mem = &os->addr[i++]; } while (mem->pa_start != mem->pa_end); - return i; + return i-1; } /** -- cgit v1.2.3 From 46232a3622c6e33605906ee6690dfef372925f53 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 23 Nov 2011 14:43:01 -0800 Subject: ARM: OMAP: PM: only register TWL with voltage layer when device is present Current code registers voltage layer details for TWL PMIC even when a TWL has not been registered. Fix this to only register the TWL with voltage layer when the TWL PMIC is initialized by board-level code. Signed-off-by: Kevin Hilman Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pm.c | 6 ++---- arch/arm/mach-omap2/twl-common.c | 11 +++++++++++ arch/arm/mach-omap2/twl-common.h | 3 +++ 3 files changed, 16 insertions(+), 4 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 1e79bdf313e3..00bff46ca48b 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -24,6 +24,7 @@ #include "powerdomain.h" #include "clockdomain.h" #include "pm.h" +#include "twl-common.h" static struct omap_device_pm_latency *pm_lats; @@ -226,11 +227,8 @@ postcore_initcall(omap2_common_pm_init); static int __init omap2_common_pm_late_init(void) { - /* Init the OMAP TWL parameters */ - omap3_twl_init(); - omap4_twl_init(); - /* Init the voltage layer */ + omap_pmic_late_init(); omap_voltage_late_init(); /* Initialize the voltages */ diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 522435772168..10b20c652e5d 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -30,6 +30,7 @@ #include #include "twl-common.h" +#include "pm.h" static struct i2c_board_info __initdata pmic_i2c_board_info = { .addr = 0x48, @@ -48,6 +49,16 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } +void __init omap_pmic_late_init(void) +{ + /* Init the OMAP TWL parameters (if PMIC has been registerd) */ + if (!pmic_i2c_board_info.irq) + return; + + omap3_twl_init(); + omap4_twl_init(); +} + #if defined(CONFIG_ARCH_OMAP3) static struct twl4030_usb_data omap3_usb_pdata = { .usb_mode = T2_USB_MODE_ULPI, diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 5e83a5bd37fb..275dde8cb27a 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -1,6 +1,8 @@ #ifndef __OMAP_PMIC_COMMON__ #define __OMAP_PMIC_COMMON__ +#include + #define TWL_COMMON_PDATA_USB (1 << 0) #define TWL_COMMON_PDATA_BCI (1 << 1) #define TWL_COMMON_PDATA_MADC (1 << 2) @@ -30,6 +32,7 @@ struct twl4030_platform_data; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data); +void omap_pmic_late_init(void); static inline void omap2_pmic_init(const char *pmic_type, struct twl4030_platform_data *pmic_data) -- cgit v1.2.3 From 5a4f1844c2ba21f804d7729306d9b16eaeb724a8 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 23 Nov 2011 14:43:37 -0800 Subject: ARM: OMAP: smartreflex: fix IRQ handling bug Fix a bug which has been on this driver since it was added by the original commit 984aa6db which would never clear IRQSTATUS bits. Signed-off-by: Felipe Balbi Signed-off-by: Kevin Hilman Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/smartreflex.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 6a4f6839a7d9..cf246b39bac7 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -139,7 +139,7 @@ static irqreturn_t sr_interrupt(int irq, void *data) sr_write_reg(sr_info, ERRCONFIG_V1, status); } else if (sr_info->ip_type == SR_TYPE_V2) { /* Read the status bits */ - sr_read_reg(sr_info, IRQSTATUS); + status = sr_read_reg(sr_info, IRQSTATUS); /* Clear them by writing back */ sr_write_reg(sr_info, IRQSTATUS, status); -- cgit v1.2.3 From a8a6565c7615cab3608d75af95b5c8a3522cd7c4 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 23 Nov 2011 14:44:50 -0800 Subject: ARM: OMAP2: select ARM_AMBA if OMAP3_EMU is defined This patch selects ARM_AMBA if OMAP3_EMU is defined because OC_ETM depends on ARM_AMBA, so fix the link failure[1]. [1], arch/arm/kernel/built-in.o: In function `etm_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:609: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:409: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etm_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:640: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:646: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:648: undefined reference to `amba_driver_unregister' arch/arm/kernel/built-in.o: In function `etm_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:545: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:595: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:347: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:392: undefined reference to `amba_release_regions' arch/arm/mach-omap2/built-in.o: In function `emu_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:62: undefined reference to `amba_device_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:63: undefined reference to `amba_device_register' make: *** [.tmp_vmlinux1] Error 1 making modules Signed-off-by: Ming Lei Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 503414718905..e1293aa513d3 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -334,6 +334,7 @@ config MACH_OMAP4_PANDA config OMAP3_EMU bool "OMAP3 debugging peripherals" depends on ARCH_OMAP3 + select ARM_AMBA select OC_ETM help Say Y here to enable debugging hardware of omap3 -- cgit v1.2.3 From 52a2396249478018ea2e83d962a347d38d8cccbe Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Wed, 23 Nov 2011 14:45:22 -0800 Subject: ARM: OMAP2+: Remove empty io.h The file arch/arm/mach-omap2/io.h is empty, so we can remove it. Signed-off-by: Thomas Weber Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/io.h | 0 1 file changed, 0 insertions(+), 0 deletions(-) delete mode 100644 arch/arm/mach-omap2/io.h (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/io.h b/arch/arm/mach-omap2/io.h deleted file mode 100644 index e69de29bb2d1..000000000000 -- cgit v1.2.3 From 8770b07c2dff3cec2c751b289ee690137c88ea54 Mon Sep 17 00:00:00 2001 From: "Govindraj.R" Date: Wed, 23 Nov 2011 14:45:37 -0800 Subject: ARM: OMAP2+: Fix Compilation error when omap_l3_noc built as module Fix below compilation failure on mainline kernel 3.2-rc1 when omap_l3_noc.c is built as module. arch/arm/mach-omap2/omap_l3_noc.c:240: error: expected ',' or ';' before 'MODULE_DEVICE_TABLE' Signed-off-by: Govindraj.R Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_l3_noc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c index 6a66aa5e2a5b..d15225ff5c49 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.c +++ b/arch/arm/mach-omap2/omap_l3_noc.c @@ -237,7 +237,7 @@ static int __devexit omap4_l3_remove(struct platform_device *pdev) static const struct of_device_id l3_noc_match[] = { {.compatible = "ti,omap4-l3-noc", }, {}, -} +}; MODULE_DEVICE_TABLE(of, l3_noc_match); #else #define l3_noc_match NULL -- cgit v1.2.3