From 01dc79cd6fe7d25b0eba84009634f5435cbdb4e6 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 29 Jan 2019 11:31:53 +0100 Subject: regulator: fixed/gpio: Pull inversion/OD into gpiolib This pushes the handling of inversion semantics and open drain settings to the GPIO descriptor and gpiolib. All affected board files are also augmented. This is especially nice since we don't have to have any confusing flags passed around to the left and right littering the fixed and GPIO regulator drivers and the regulator core. It is all just very straight-forward: the core asks the GPIO line to be asserted or deasserted and gpiolib deals with the rest depending on how the platform is configured: if the line is active low, it deals with that, if the line is open drain, it deals with that too. Cc: Alexander Shiyan # i.MX boards user Cc: Haojian Zhuang # MMP2 maintainer Cc: Aaro Koskinen # OMAP1 maintainer Cc: Tony Lindgren # OMAP1,2,3 maintainer Cc: Mike Rapoport # EM-X270 maintainer Cc: Robert Jarzmik # EZX maintainer Cc: Philipp Zabel # Magician maintainer Cc: Petr Cvek # Magician Cc: Robert Jarzmik # PXA Cc: Paul Parsons # hx4700 Cc: Daniel Mack # Raumfeld maintainer Cc: Marc Zyngier # Zeus maintainer Cc: Geert Uytterhoeven # SuperH pinctrl/GPIO maintainer Cc: Russell King # SA1100 Tested-by: Marek Szyprowski Tested-by: Janusz Krzysztofik #OMAP1 Amstrad Delta Signed-off-by: Linus Walleij Signed-off-by: Mark Brown --- arch/arm/mach-omap1/board-ams-delta.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arm/mach-omap1') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index c4c0a8ea11e4..be30c3c061b4 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -267,7 +267,6 @@ static struct fixed_voltage_config modem_nreset_config = { .supply_name = "modem_nreset", .microvolts = 3300000, .startup_delay = 25000, - .enable_high = 1, .enabled_at_boot = 1, .init_data = &modem_nreset_data, }; @@ -533,7 +532,6 @@ static struct regulator_init_data keybrd_pwr_initdata = { static struct fixed_voltage_config keybrd_pwr_config = { .supply_name = "keybrd_pwr", .microvolts = 5000000, - .enable_high = 1, .init_data = &keybrd_pwr_initdata, }; -- cgit v1.2.3