From 128789a8293653a4f889f2b1601eea07c00ff65e Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 13 Jun 2012 14:52:45 +0200 Subject: ARM: Kirkwood: Fix clk problems modular ethernet driver When the ethernet driver was built as a module, it would lock the machine when loaded. At boot the ethernet clks are unused, so get turned off. Later, when the module is loaded, the probe function would access the hardware before the clock was restarted, and the machine would lock. It has also been determined that when the clk is turned off, the interface forgets its MAC address, which for most systems, is set by the boot loader. When the machine setup file creates a platform device for the interface, prepare and enable the clock for the interface. This will ensure it is not turned off. However, if the setup file only instantiates one platform device, the other will have its clk disabled, thus maybe saving a little power. Report-by: Simon Baatz Signed-off-by: Andrew Lunn Tested-by: Simon Baatz Signed-off-by: Olof Johansson --- arch/arm/mach-kirkwood/common.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-kirkwood') diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 25fb3fd418ef..e1d2c6def5e6 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -193,9 +193,11 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name, bit_idx, 0, &gating_lock, fn); } +static struct clk *ge0, *ge1; + void __init kirkwood_clk_init(void) { - struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio; + struct clk *runit, *sata0, *sata1, *usb0, *sdio; struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio; tclk = clk_register_fixed_rate(NULL, "tclk", NULL, @@ -257,6 +259,9 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, IRQ_KIRKWOOD_GE00_ERR); + /* The interface forgets the MAC address assigned by u-boot if + the clock is turned off, so claim the clk now. */ + clk_prepare_enable(ge0); } @@ -268,6 +273,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, IRQ_KIRKWOOD_GE01_ERR); + clk_prepare_enable(ge1); } -- cgit v1.2.3 From 22cec7ca02f81b57a06d238a4043bc6c9ba6ea03 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Fri, 8 Jun 2012 11:36:45 +0200 Subject: ARM: iconnect: Remove include of removed linux/spi/orion_spi.h v3.5-rc1 fails to build when DT and iconnect is enabled because of this now none existant include file. Also remove the other two SPI include files, which are not needed with the move to DT. Signed-off-by: Andrew Lunn Acked-by: Arnaud Patard Signed-off-by: Olof Johansson --- arch/arm/mach-kirkwood/board-iconnect.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch/arm/mach-kirkwood') diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index 2222c5739519..b0d3cc49269d 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -20,9 +20,6 @@ #include #include #include -#include -#include -#include #include #include #include -- cgit v1.2.3 From 5fb2ce119c113e5c987fa81ed89e73b2653e28e4 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 22 Jun 2012 08:54:01 +0200 Subject: ARM: Kirkwood: clk_register_gate_fn: add fn assignment In commit: 98d9986 ARM: Kirkwood: Replace clock gating the kirkwood clock gating has been reworked. A custom variant of clock gating, that calls a custom function before gating the clock off, has been introduced. However in clk_register_gate_fn() this custom function "fn" is never assigned. This patch adds the missing fn assignment. Cc: stable Signed-off-by: Marc Kleine-Budde Tested-by: Andrew Lunn Acked-by: Andrew Lunn Signed-off-by: Olof Johansson --- arch/arm/mach-kirkwood/common.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-kirkwood') diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index e1d2c6def5e6..f261cd242643 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -159,6 +159,7 @@ static struct clk __init *clk_register_gate_fn(struct device *dev, gate_fn->gate.flags = clk_gate_flags; gate_fn->gate.lock = lock; gate_fn->gate.hw.init = &init; + gate_fn->fn = fn; /* ops is the gate ops, but with our disable function */ if (clk_gate_fn_ops.disable != clk_gate_fn_disable) { -- cgit v1.2.3 From 0fa1f0609a0c1fe8b2be3c0089a2cb48f7fda521 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Fri, 22 Jun 2012 08:54:02 +0200 Subject: ARM: Orion: Fix Virtual/Physical mixup with watchdog The orion watchdog is expecting to be passed the physcial address of the hardware, and will ioremap() it to give a virtual address it will use as the base address for the hardware. However, when creating the platform resource record, a virtual address was being used. Add the necassary #define's so we can pass the physical address as expected. Tested on Kirkwood and Orion5x. Cc: stable Signed-off-by: Andrew Lunn Signed-off-by: Olof Johansson --- arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 1 + arch/arm/mach-kirkwood/include/mach/kirkwood.h | 1 + 2 files changed, 2 insertions(+) (limited to 'arch/arm/mach-kirkwood') diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 3eee37a3b501..a115142f8690 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -38,6 +38,7 @@ #define IRQ_MASK_HIGH_OFF 0x0014 #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) #define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) #define L2_WRITETHROUGH 0x00000010 diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index fede3d503efa..c5b68510776b 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -80,6 +80,7 @@ #define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) #define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) +#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000) #define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000) -- cgit v1.2.3