From 38669e045dbf8f62a008898a7fb1e93975b3817c Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Tue, 9 Oct 2012 12:56:36 +0100 Subject: ARM: vexpress: Start using new Versatile Express infrastructure This patch starts using all the configuration infrastructure. - generic GPIO library is forced now - sysreg GPIOs are used as MMC CD and WP information sources; thanks to this MMCI auxiliary data is not longer necessary - DVI muxer and mode control is removed from non-DT V2P-CA9 code as this is now handled by the vexpress-dvi driver - clock generators control is removed as is being handled by the common clock driver now - the sysreg and sysctl control is now delegated to the appropriate drivers and all related code was removed - NOR Flash set_vpp function has been removed as the control bit used does _not_ control its VPP line, but the #WP signal instead (which is de facto unusable in case of Linux MTD drivers); this also allowed the remove its DT auxiliary data The non-DT code defines only minimal required number of the config devices. Device Trees are updated to make use of all new features. Signed-off-by: Pawel Moll --- arch/arm/include/asm/hardware/sp810.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h index afd7e916472f..6636430dd0e6 100644 --- a/arch/arm/include/asm/hardware/sp810.h +++ b/arch/arm/include/asm/hardware/sp810.h @@ -50,12 +50,6 @@ #define SCPCELLID2 0xFF8 #define SCPCELLID3 0xFFC -#define SCCTRL_TIMEREN0SEL_REFCLK (0 << 15) -#define SCCTRL_TIMEREN0SEL_TIMCLK (1 << 15) - -#define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17) -#define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17) - #define SCCTRL_TIMERENnSEL_SHIFT(n) (15 + ((n) * 2)) static inline void sysctl_soft_reset(void __iomem *base) -- cgit v1.2.3 From e5c5f2adeb370559f4b221d57214db85858b786a Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 22 Oct 2012 11:42:54 -0600 Subject: ARM: implement debug_ll_io_init() When using DEBUG_LL, the UART's (or other HW's) registers are mapped into early page tables based on the results of assembly macro addruart. Later, when the page tables are replaced, the same virtual address must remain valid. Historically, this has been ensured by using defines from in both the implementation of addruart, and the machine's .map_io() function. However, with the move to single zImage, we wish to remove . To enable this, the macro addruart may be used when constructing the late page tables too; addruart is exposed as a C function debug_ll_addr(), and used to set up the required mapping in debug_ll_io_init(), which may called on an opt-in basis from a machine's .map_io() function. Signed-off-by: Rob Herring [swarren: Mask map.virtual with PAGE_MASK. Checked for NULL results from debug_ll_addr (e.g. when selected UART isn't valid). Fixed compile when either !CONFIG_DEBUG_LL or CONFIG_DEBUG_SEMIHOSTING.] Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- arch/arm/include/asm/mach/map.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm/include/asm') diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index 195ac2f9d3d3..2fe141fcc8d6 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -40,6 +40,13 @@ extern void iotable_init(struct map_desc *, int); extern void vm_reserve_area_early(unsigned long addr, unsigned long size, void *caller); +#ifdef CONFIG_DEBUG_LL +extern void debug_ll_addr(unsigned long *paddr, unsigned long *vaddr); +extern void debug_ll_io_init(void); +#else +static inline void debug_ll_io_init(void) {} +#endif + struct mem_type; extern const struct mem_type *get_mem_type(unsigned int type); /* -- cgit v1.2.3