From fef5c646db07bfa64288b8fac61e6509f4fdb753 Mon Sep 17 00:00:00 2001
From: Andrew Lunn <andrew@lunn.ch>
Date: Wed, 8 Mar 2017 03:50:13 +0100
Subject: ARM: dts: vf610-zii-dev-c: Wire up PHY interrupts

The PHYs embedded in the switch direct there interrupts through the
switch interrupt controllers. Now that devel C has its switch
interrupts connected to the SoC, the PHY interrupts can be used by
phylib. Explicitly include MDIO nodes in the switch device tree nodes,
and link the PHY interrupts back to the switch interrupt
controller. Also, link the ports to the PHYs on the MDIO bus.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 65 +++++++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)

(limited to 'arch/arm/boot')

diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index 352ecec64bb7..db3b408ea55a 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -97,21 +97,25 @@
 					port@1 {
 						reg = <1>;
 						label = "lan1";
+						phy-handle = <&switch0phy1>;
 					};
 
 					port@2 {
 						reg = <2>;
 						label = "lan2";
+						phy-handle = <&switch0phy2>;
 					};
 
 					port@3 {
 						reg = <3>;
 						label = "lan3";
+						phy-handle = <&switch0phy3>;
 					};
 
 					port@4 {
 						reg = <4>;
 						label = "lan4";
+						phy-handle = <&switch0phy4>;
 					};
 
 					switch0port10: port@10 {
@@ -121,6 +125,35 @@
 						link = <&switch1port10>;
 					};
 				};
+
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					switch0phy1: switch0phy@1 {
+						reg = <1>;
+						interrupt-parent = <&switch0>;
+						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch0phy2: switch0phy@2 {
+						reg = <2>;
+						interrupt-parent = <&switch0>;
+						interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch0phy3: switch0phy@3 {
+						reg = <3>;
+						interrupt-parent = <&switch0>;
+						interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch0phy4: switch0phy@4 {
+						reg = <4>;
+						interrupt-parent = <&switch0>;
+						interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+					};
+				};
 			};
 		};
 
@@ -150,21 +183,25 @@
 					port@1 {
 						reg = <1>;
 						label = "lan5";
+						phy-handle = <&switch1phy1>;
 					};
 
 					port@2 {
 						reg = <2>;
 						label = "lan6";
+						phy-handle = <&switch1phy2>;
 					};
 
 					port@3 {
 						reg = <3>;
 						label = "lan7";
+						phy-handle = <&switch1phy3>;
 					};
 
 					port@4 {
 						reg = <4>;
 						label = "lan8";
+						phy-handle = <&switch1phy4>;
 					};
 
 
@@ -175,6 +212,34 @@
 						link = <&switch0port10>;
 					};
 				};
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					switch1phy1: switch1phy@1 {
+						reg = <1>;
+						interrupt-parent = <&switch1>;
+						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy2: switch1phy@2 {
+						reg = <2>;
+						interrupt-parent = <&switch1>;
+						interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy3: switch1phy@3 {
+						reg = <3>;
+						interrupt-parent = <&switch1>;
+						interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy4: switch1phy@4 {
+						reg = <4>;
+						interrupt-parent = <&switch1>;
+						interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+					};
+				};
 			};
 		};
 
-- 
cgit v1.2.3