From d2daa2f765f9972c61fa0b361dcdb2a81b45a278 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 13 May 2014 21:43:36 +0800 Subject: ARM: dts: imx: add initial imx6sx-sdb board support Add initial imx6sx-sdb board support with limited devices enabled. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index adb5ed9e269e..cc776fcea73a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -216,6 +216,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ imx6sl-evk.dtb \ + imx6sx-sdb.dtb \ vf610-colibri.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb -- cgit v1.2.3 From d8cae888aa2bc0fe0905fd24d859bad8ce77aaec Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Tue, 13 May 2014 18:48:15 +0400 Subject: ARM: dts: Add support for the cpuimx27 board from Eukrea and its baseboard This patch adds support for the cpuimx27 board from Eukrea and its baseboard. This change is intended to further remove non-DT support for this board. Signed-off-by: Alexander Shiyan Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cc776fcea73a..677154184697 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -161,6 +161,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx25-pdk.dtb \ imx27-apf27.dtb \ imx27-apf27dev.dtb \ + imx27-eukrea-mbimxsd27-baseboard.dtb \ imx27-pdk.dtb \ imx27-phytec-phycore-rdk.dtb \ imx27-phytec-phycard-s-rdk.dtb \ -- cgit v1.2.3 From 04e151e8206e1e02e3246a0a4ecb8ad402a0d6e4 Mon Sep 17 00:00:00 2001 From: Denis Carikli Date: Thu, 22 May 2014 16:00:43 +0200 Subject: ARM: dts: imx25: mbimxsd25: Add displays support. The CMO-QVGA, DVI-VGA and DVI-SVGA displays were added. Signed-off-by: Denis Carikli Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 677154184697..aa2b35ecd938 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -157,6 +157,9 @@ dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb dtb-$(CONFIG_ARCH_MXC) += \ imx25-eukrea-mbimxsd25-baseboard.dtb \ + imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \ + imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \ + imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \ imx25-karo-tx25.dtb \ imx25-pdk.dtb \ imx27-apf27.dtb \ -- cgit v1.2.3 From c8787bae4b6694a012e1f2c3c82eb095f4c1c160 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Thu, 12 Jun 2014 15:05:17 +0200 Subject: ARM: dts: imx6: add support for Ka-Ro TX6 modules MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds support for the Ka-Ro electronics GmbH TX6 modules. There are five distinct module types with either i.MX6Q or i.MX6DL and LVDS or LCD display interface and one DTS file for a complete system with an i.MX6DL based TX6 module and a baseboard mounted on the back of a display (imx6dl-tx6dl-comtft.dts). Signed-off-by: Lothar Waßmann Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index aa2b35ecd938..5393b5d09844 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -199,6 +199,9 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6dl-sabreauto.dtb \ imx6dl-sabrelite.dtb \ imx6dl-sabresd.dtb \ + imx6dl-tx6dl-comtft.dtb \ + imx6dl-tx6u-801x.dtb \ + imx6dl-tx6u-811x.dtb \ imx6dl-wandboard.dtb \ imx6q-arm2.dtb \ imx6q-cm-fx6.dtb \ @@ -219,6 +222,11 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-sbc6x.dtb \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ + imx6q-tx6q-1010.dtb \ + imx6q-tx6q-1010-comtft.dtb \ + imx6q-tx6q-1020.dtb \ + imx6q-tx6q-1020-comtft.dtb \ + imx6q-tx6q-1110.dtb \ imx6sl-evk.dtb \ imx6sx-sdb.dtb \ vf610-colibri.dtb \ -- cgit v1.2.3 From c64b874f0eac6f450e8834e407bc98ec402b81e7 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Fri, 20 Jun 2014 16:52:47 +0200 Subject: ARM: dts: imx6: add aristainetos board support This patch add support for the imx6dl based aristainetos board with following configuration: CPU: Freescale i.MX6DL rev1.1 at 792 MHz DRAM: 1 GiB NAND: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB As this board can used with 2 different display types, the differences between them are extracted into 2 DTS files, and the common settings are collected in a common file. Signed-off-by: Heiko Schocher Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5393b5d09844..644d4c2e58ec 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -186,6 +186,8 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx53-tx53-x03x.dtb \ imx53-tx53-x13x.dtb \ imx53-voipac-bsb.dtb \ + imx6dl-aristainetos_4.dtb \ + imx6dl-aristainetos_7.dtb \ imx6dl-cubox-i.dtb \ imx6dl-dfi-fs700-m60.dtb \ imx6dl-gw51xx.dtb \ -- cgit v1.2.3 From 8536239e371fababdb2b97468a07b3dac1cbfd5e Mon Sep 17 00:00:00 2001 From: George Joseph Date: Tue, 8 Jul 2014 12:48:16 -0600 Subject: ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. The rev C1 Wandboard uses the Broadcom 4330 for WiFi and Bluetooth instead of the 4329. This changes the PADS assigned for the control lines. Another side effect of the change is that on the rev C1 board, usdhc driver can't detect the chip presence correctly so usdhc2 now needs its 'non-removeable' property removed. So that rev B1 and earlier can continue to work, this patch splits the board-specific definitions from imx6qdl-wandboard.dtsi into imx6qdl-wandboard-revb1.dtsi and imx6qdl-wandboard-revc1.dtsi. The new files include the original base imx6qdl-wandboard.dtsi which retains the common definitions. The existing imx6dl-wandboard.dts includes imx6qdl-wandboard-revc1.dtsi and imx6dl-wandboard-revb1.dts (new) includes imx6qdl-wandboard-revb1.dtsi. This makes the rev C1 board the new default. The same pattern is used for imx6q-wandboard.dts. So, from U-Boot on a WB-Quad you use imxq-wandboard-revb1.dtb for the older B1 board and imxq-wandboard.dtb for the current rev C1 board. Signed-off-by: George Joseph Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 644d4c2e58ec..90d5f494cf1d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -205,6 +205,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6dl-tx6u-801x.dtb \ imx6dl-tx6u-811x.dtb \ imx6dl-wandboard.dtb \ + imx6dl-wandboard-revb1.dtb \ imx6q-arm2.dtb \ imx6q-cm-fx6.dtb \ imx6q-cubox-i.dtb \ @@ -224,6 +225,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-sbc6x.dtb \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ + imx6q-wandboard-revb1.dtb \ imx6q-tx6q-1010.dtb \ imx6q-tx6q-1010-comtft.dtb \ imx6q-tx6q-1020.dtb \ -- cgit v1.2.3 From e2047e33f2bd2713f6924c6dc2bf13e15784402e Mon Sep 17 00:00:00 2001 From: Robert Nelson Date: Tue, 8 Jul 2014 09:49:22 -0500 Subject: ARM: dts: add initial Rex Pro board support Add initial Rex Pro i.mx6q board support. Ethernet, UART, USB, I2C, SPI, HDMI, Audio, and SDHC cards are working. Currently no mainline u-boot, so boot with cat zImage imx6q-rex-pro.dtb > zImage.dtb, then using mkimage create uImage Signed-off-by: Robert Nelson Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 90d5f494cf1d..06210421c578 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -219,6 +219,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-gw54xx.dtb \ imx6q-nitrogen6x.dtb \ imx6q-phytec-pbab01.dtb \ + imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ -- cgit v1.2.3 From 417d65f65f783e21e8fc6698a748a88105cae1c6 Mon Sep 17 00:00:00 2001 From: Robert Nelson Date: Tue, 8 Jul 2014 09:49:23 -0500 Subject: ARM: dts: add initial Rex Basic board support Add initial Rex Pro i.mx6dl board support. Ethernet, UART, USB, I2C, SPI, HDMI, Audio, and SDHC cards are working. Currently no mainline u-boot, so boot with cat zImage imx6dl-rex-basic.dtb > zImage.dtb, then using mkimage create uImage Signed-off-by: Robert Nelson Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 06210421c578..c853ca22b06a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -197,6 +197,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6dl-hummingboard.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-pbab01.dtb \ + imx6dl-rex-basic.dtb \ imx6dl-riotboard.dtb \ imx6dl-sabreauto.dtb \ imx6dl-sabrelite.dtb \ -- cgit v1.2.3