From f43d3ec3a889c7f6a196f3b6d6b13345ee46af8a Mon Sep 17 00:00:00 2001 From: Guy Shapiro Date: Thu, 15 Dec 2016 21:23:02 -0800 Subject: Input: imx6ul_tsc - generalize the averaging property Make the avarage-samples property a general touchscreen property rather than imx6ul device specific. Signed-off-by: Guy Shapiro Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov --- .../devicetree/bindings/input/touchscreen/imx6ul_tsc.txt | 11 +++-------- .../devicetree/bindings/input/touchscreen/touchscreen.txt | 3 +++ 2 files changed, 6 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt index a66069f6db66..d4927c202aef 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt @@ -17,13 +17,8 @@ Optional properties: This value depends on the touch screen. - pre-charge-time: the touch screen need some time to precharge. This value depends on the touch screen. -- average-samples: Number of data samples which are averaged for each read. - Valid values 0-4 - 0 = 1 sample - 1 = 4 samples - 2 = 8 samples - 3 = 16 samples - 4 = 32 samples +- touchscreen-average-samples: Number of data samples which are averaged for + each read. Valid values are 1, 4, 8, 16 and 32. Example: tsc: tsc@02040000 { @@ -39,6 +34,6 @@ Example: xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; measure-delay-time = <0xfff>; pre-charge-time = <0xffff>; - average-samples = <4>; + touchscreen-average-samples = <32>; status = "okay"; }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt index bccaa4e73045..537643e86f61 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt @@ -14,6 +14,9 @@ Optional properties for Touchscreens: - touchscreen-fuzz-pressure : pressure noise value of the absolute input device (arbitrary range dependent on the controller) + - touchscreen-average-samples : Number of data samples which are averaged + for each read (valid values dependent on the + controller) - touchscreen-inverted-x : X axis is inverted (boolean) - touchscreen-inverted-y : Y axis is inverted (boolean) - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) -- cgit v1.2.3