From a519c27da6e8a4e74df2fde5654ea9a42dda9fcb Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Thu, 5 Nov 2015 13:17:57 +0800 Subject: dt-bindings: rockchip-thermal: Support the RK3368 SoCs compatible This patchset attempts to new compatible for thermal founding on RK3368 SoCs. Signed-off-by: Caesar Wang Acked-by: Rob Herring Signed-off-by: Eduardo Valentin --- Documentation/devicetree/bindings/thermal/rockchip-thermal.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt index b38200d2583a..0dfa60d88dd3 100644 --- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt @@ -1,7 +1,9 @@ * Temperature Sensor ADC (TSADC) on rockchip SoCs Required properties: -- compatible : "rockchip,rk3288-tsadc" +- compatible : should be "rockchip,-tsadc" + "rockchip,rk3288-tsadc": found on RK3288 SoCs + "rockchip,rk3368-tsadc": found on RK3368 SoCs - reg : physical base address of the controller and length of memory mapped region. - interrupts : The interrupt number to the cpu. The interrupt specifier format -- cgit v1.2.3 From c7f42c63901b964833eb23a9bda873b799e7f308 Mon Sep 17 00:00:00 2001 From: Jean-Yves Faye Date: Tue, 29 Sep 2015 11:39:19 +0200 Subject: ipmi watchdog : add panic_wdt_timeout parameter In order to allow panic actions to be processed, the ipmi watchdog driver sets a new timeout value on panic. The 255s timeout was designed to allow kdump and others actions on panic, as in http://lkml.iu.edu/hypermail/linux/kernel/0711.3/0258.html This is counter-intuitive for a end-user who sets watchdog timeout value to something like 30s and who expects BMC to reset the system within 30s of a panic. This commit allows user to configure the timeout on panic. Signed-off-by: Jean-Yves Faye Signed-off-by: Corey Minyard --- Documentation/IPMI.txt | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt index 31d1d658827f..c0d8788e75d3 100644 --- a/Documentation/IPMI.txt +++ b/Documentation/IPMI.txt @@ -587,7 +587,7 @@ used to control it: modprobe ipmi_watchdog timeout= pretimeout= action= preaction= preop= start_now=x - nowayout=x ifnum_to_use=n + nowayout=x ifnum_to_use=n panic_wdt_timeout= ifnum_to_use specifies which interface the watchdog timer should use. The default is -1, which means to pick the first one registered. @@ -597,7 +597,9 @@ is the amount of seconds before the reset that the pre-timeout panic will occur (if pretimeout is zero, then pretimeout will not be enabled). Note that the pretimeout is the time before the final timeout. So if the timeout is 50 seconds and the pretimeout is 10 seconds, then the pretimeout -will occur in 40 second (10 seconds before the timeout). +will occur in 40 second (10 seconds before the timeout). The panic_wdt_timeout +is the value of timeout which is set on kernel panic, in order to let actions +such as kdump to occur during panic. The action may be "reset", "power_cycle", or "power_off", and specifies what to do when the timer times out, and defaults to @@ -634,6 +636,7 @@ for configuring the watchdog: ipmi_watchdog.preop= ipmi_watchdog.start_now=x ipmi_watchdog.nowayout=x + ipmi_watchdog.panic_wdt_timeout= The options are the same as the module parameter options. -- cgit v1.2.3 From b2b7e00148a203e9934bbd17aebffae3f447ade7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Matias=20Bj=C3=B8rling?= Date: Thu, 12 Nov 2015 20:25:10 +0100 Subject: null_blk: register as a LightNVM device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add support for registering as a LightNVM device. This allows us to evaluate the performance of the LightNVM subsystem. In /drivers/Makefile, LightNVM is moved above block device drivers to make sure that the LightNVM media managers have been initialized before drivers under /drivers/block are initialized. Signed-off-by: Matias Bjørling Fix by Jens Axboe to remove unneeded slab cache and the following memory leak. Signed-off-by: Jens Axboe --- Documentation/block/null_blk.txt | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation') diff --git a/Documentation/block/null_blk.txt b/Documentation/block/null_blk.txt index 2f6c6ff7161d..d8880ca30af4 100644 --- a/Documentation/block/null_blk.txt +++ b/Documentation/block/null_blk.txt @@ -70,3 +70,6 @@ use_per_node_hctx=[0/1]: Default: 0 parameter. 1: The multi-queue block layer is instantiated with a hardware dispatch queue for each CPU node in the system. + +use_lightnvm=[0/1]: Default: 0 + Register device with LightNVM. Requires blk-mq to be used. -- cgit v1.2.3 From 3bf7f56e70c9f0edb4f91cbb73a393c3b1d24801 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 19 Nov 2015 00:42:23 +0100 Subject: Revert "Documentation: kernel_parameters for Intel P state driver" Revert commit 053f56def57b (Documentation: kernel_parameters for Intel P state driver) as the code documented by it has been reverted already. Signed-off-by: Rafael J. Wysocki --- Documentation/kernel-parameters.txt | 3 --- 1 file changed, 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 9b75e2a760de..22a4b687ea5b 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1546,9 +1546,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. hwp_only Only load intel_pstate on systems which support hardware P state control (HWP) if available. - no_acpi - Don't use ACPI processor performance control objects - _PSS and _PPC specified limits. intremap= [X86-64, Intel-IOMMU] on enable Interrupt Remapping (default) -- cgit v1.2.3 From cdc5a3110e7c3ae793f367285789a6bc39c962dc Mon Sep 17 00:00:00 2001 From: Alexandra Yates Date: Thu, 5 Nov 2015 11:40:25 -0800 Subject: i2c: i801: add Intel Lewisburg device IDs Adding Intel codename Lewisburg platform device IDs for SMBus. Signed-off-by: Alexandra Yates Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang --- Documentation/i2c/busses/i2c-i801 | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index 6a4b1af724f8..1bba38dd2637 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -32,6 +32,7 @@ Supported adapters: * Intel Sunrise Point-LP (PCH) * Intel DNV (SOC) * Intel Broxton (SOC) + * Intel Lewisburg (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller -- cgit v1.2.3 From 17e846aa390d89adae053d9d2ba8acb286b64af7 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Mon, 23 Nov 2015 10:35:25 -0800 Subject: ARM: dts: keystone: k2l: fix kernel crash when clk_ignore_unused is not in bootargs Currently kernel crash randomly when K2L EVM is booted without clk_ignore_unused in the bootargs. This workaround is not needed on other K2 devices such as K2HK and K2E and with this fix, we can remove the workaround altogether. netcp driver on K2L uses linked ram on OSR (On chip Static RAM) and requires the clock to this peripheral enabled for proper functioning. This is the reason for the kernel crash. So add the clock node to fix this issue. While at it, remove the workaround documentation as well. With the fix applied, clk_summary dump shows the clock to OSR enabled. cat /sys/kernel/debug/clk/clk_summary ------cut-------------- tcp3d-1 0 0 399360000 0 0 tcp3d-0 0 0 399360000 0 0 osr 1 1 399360000 0 0 fftc-0 0 0 399360000 0 0 -----cut---------------- Signed-off-by: Murali Karicheri Signed-off-by: Santosh Shilimkar --- Documentation/arm/keystone/Overview.txt | 18 ------------------ 1 file changed, 18 deletions(-) (limited to 'Documentation') diff --git a/Documentation/arm/keystone/Overview.txt b/Documentation/arm/keystone/Overview.txt index f17bc4c9dff9..400c0c270d2e 100644 --- a/Documentation/arm/keystone/Overview.txt +++ b/Documentation/arm/keystone/Overview.txt @@ -49,24 +49,6 @@ specified through DTS. Following are the DTS used:- The device tree documentation for the keystone machines are located at Documentation/devicetree/bindings/arm/keystone/keystone.txt -Known issues & workaround -------------------------- - -Some of the device drivers used on keystone are re-used from that from -DaVinci and other TI SoCs. These device drivers may use clock APIs directly. -Some of the keystone specific drivers such as netcp uses run time power -management API instead to enable clock. As this API has limitations on -keystone, following workaround is needed to boot Linux. - - Add 'clk_ignore_unused' to the bootargs env variable in u-boot. Otherwise - clock frameworks will try to disable clocks that are unused and disable - the hardware. This is because netcp related power domain and clock - domains are enabled in u-boot as run time power management API currently - doesn't enable clocks for netcp due to a limitation. This workaround is - expected to be removed in the future when proper API support becomes - available. Until then, this work around is needed. - - Document Author --------------- Murali Karicheri -- cgit v1.2.3 From 9110ee07762a8f04835878863be2449362c63508 Mon Sep 17 00:00:00 2001 From: Marcin Wojtas Date: Mon, 30 Nov 2015 13:27:45 +0100 Subject: net: mvneta: enable setting custom TX IP checksum limit Since Armada 38x SoC can support IP checksum for jumbo frames only on a single port, it means that this feature should be enabled per-port, rather than for the whole SoC. This patch enables setting custom TX IP checksum limit by adding new optional property to the mvneta device tree node. If not used, by default 1600B is set for "marvell,armada-370-neta" and 9800B for other strings, which ensures backward compatibility. Binding documentation is updated accordingly. Signed-off-by: Marcin Wojtas Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt index f5a8ca29aff0..aeea50c84e92 100644 --- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt @@ -8,6 +8,11 @@ Required properties: - phy-mode: See ethernet.txt file in the same directory - clocks: a pointer to the reference clock for this device. +Optional properties: +- tx-csum-limit: maximum mtu supported by port that allow TX checksum. + Value is presented in bytes. If not used, by default 1600B is set for + "marvell,armada-370-neta" and 9800B for others. + Example: ethernet@d0070000 { @@ -15,6 +20,7 @@ ethernet@d0070000 { reg = <0xd0070000 0x2500>; interrupts = <8>; clocks = <&gate_clk 4>; + tx-csum-limit = <9800> status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; -- cgit v1.2.3