From a8b447f2bbbba737ff4478f498d7f83c75a9461b Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 4 Jun 2013 11:37:36 +0200 Subject: clocksource: dw_apb_timer_of: add clock-handling Add the possibility to get the clock-frequency from a timer clock instead of specifying it as dt property. Additionally also add the possibility to also define a controlling periphal clock for the timer block. The clock-frequency property is kept to act as fallback if no clocks are specified. Signed-off-by: Heiko Stuebner Acked-by: Jamie Iles --- Documentation/devicetree/bindings/rtc/dw-apb.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/rtc/dw-apb.txt b/Documentation/devicetree/bindings/rtc/dw-apb.txt index 93e2b0f048e6..eb2327b2bdb3 100644 --- a/Documentation/devicetree/bindings/rtc/dw-apb.txt +++ b/Documentation/devicetree/bindings/rtc/dw-apb.txt @@ -5,9 +5,20 @@ Required properties: - reg: physical base address of the controller and length of memory mapped region. - interrupts: IRQ line for the timer. +- either clocks+clock-names or clock-frequency properties + +Optional properties: +- clocks : list of clock specifiers, corresponding to entries in + the clock-names property; +- clock-names : should contain "timer" and "pclk" entries, matching entries + in the clocks property. - clock-frequency: The frequency in HZ of the timer. - clock-freq: For backwards compatibility with picoxcell +If using the clock specifiers, the pclk clock is optional, as not all +systems may use one. + + Example: timer1: timer@ffc09000 { @@ -23,3 +34,11 @@ Example: clock-frequency = <200000000>; reg = <0xffd00000 0x1000>; }; + + timer3: timer@ffe00000 { + compatible = "snps,dw-apb-timer-osc"; + interrupts = <0 170 4>; + reg = <0xffe00000 0x1000>; + clocks = <&timer_clk>, <&timer_pclk>; + clock-names = "timer", "pclk"; + }; -- cgit v1.2.3