From b361e27bba261ba59c73df464fa640f7c0fe3553 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Wed, 6 Dec 2006 20:41:07 -0800 Subject: [PATCH] IPMI: system interface hotplug Add the ability to hot add and remove interfaces in the ipmi_si driver. Any users who have the device open will get errors if they try to send a message. Signed-off-by: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/IPMI.txt | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'Documentation') diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt index 9101cbf2d883..24dc3fcf1594 100644 --- a/Documentation/IPMI.txt +++ b/Documentation/IPMI.txt @@ -365,6 +365,7 @@ You can change this at module load time (for a module) with: regshifts=,,... slave_addrs=,,... force_kipmid=,,... + unload_when_empty=[0|1] Each of these except si_trydefaults is a list, the first item for the first interface, second item for the second interface, etc. @@ -416,6 +417,11 @@ by the driver, but systems with broken interrupts might need an enable, or users that don't want the daemon (don't need the performance, don't want the CPU hit) can disable it. +If unload_when_empty is set to 1, the driver will be unloaded if it +doesn't find any interfaces or all the interfaces fail to work. The +default is one. Setting to 0 is useful with the hotmod, but is +obviously only useful for modules. + When compiled into the kernel, the parameters can be specified on the kernel command line as: @@ -441,6 +447,25 @@ have high-res timers enabled in the kernel and you don't have interrupts enabled, the driver will run VERY slowly. Don't blame me, these interfaces suck. +The driver supports a hot add and remove of interfaces. This way, +interfaces can be added or removed after the kernel is up and running. +This is done using /sys/modules/ipmi_si/hotmod, which is a write-only +parameter. You write a string to this interface. The string has the +format: + [:op2[:op3...]] +The "op"s are: + add|remove,kcs|bt|smic,mem|i/o,
[,[,[,...]]] +You can specify more than one interface on the line. The "opt"s are: + rsp= + rsi= + rsh= + irq= + ipmb= +and these have the same meanings as discussed above. Note that you +can also use this on the kernel command line for a more compact format +for specifying an interface. Note that when removing an interface, +only the first three parameters (si type, address type, and address) +are used for the comparison. Any options are ignored for removing. The SMBus Driver ---------------- -- cgit v1.2.3